Im running 10.6.7 but cant play call of duty 4

It says to redownload from the mac app store and I did and it still doesnt work!Im running 10.6.7 Is There a sulotion?my mac book air runs call of duty a bit slow so i wanna play it here
Hardware Overview:
  Model Name:          iMac
  Model Identifier:          iMac9,1
  Processor Name:          Intel Core 2 Duo
  Processor Speed:          2.66 GHz
  Number Of Processors:          1
  Total Number Of Cores:          2
  L2 Cache:          6 MB
  Memory:          2 GB
  Bus Speed:          1.07 GHz
  Boot ROM Version:          IM91.008D.B08
  SMC Version (system):          1.36f3
  Serial Number (system):          < Edited by Host >
  Hardware UUID:          B1153108-214B-5A09-8BC2-16FFCC0C0B5B

The M400 has a weak graphics card in it that barely supports Vista's Aero Desktop system. The Intel 945 Graphics Chipset is not fully compatible with DirectX9 dispite what the checks say, some of the DirectX9 work is done via emulation on the CPU.
As for Call of Duty 4, I doubt there is any chance of getting it working let alone a decent frame rate.
I own an M400 and it was one of the things I knew would be a problem when I purchased it.
Sorry :(

Similar Messages

  • I got a new Macbook Pro and a Superdrive when i put in a DVD it reads it and puts a dick icon with the DVD name when i open that i have the auido and video folders but cant play the DVD anyone know why

    I got a new Macbook Pro and a Superdrive when i put in a DVD it reads it and puts a dick icon with the DVD name when i open that i have the auido and video folders but cant play the DVD anyone know why.

    Open with iDVD.app in your applications folder.
    or download VLC.app
    http://www.videolan.org/vlc/download-macosx.html

  • Moderate NAT while playing Call of Duty Ghosts on ...

    As the problem says, I have my NAT stuck on moderate whenever I play Ghosts.  I have run through the checks on CG/GG-NAT and used PortForward.com and I still my NAT remains on moderate.  The kicker is that it *was* Open - I'd checked advice online and people suggested putting it in a DMZ - thankfully that's easy with the Home Hub 4, so I dutifully did that and lo & behold it was showing as Open and my connection was running fantastically.  But then, last week, I powered it on and the game claims I'm on moderate and my connection nearly makes playing online pointless - which, as I went with BT due to the quality of connection I could get is frustrating.  But anyway, all through this my NAT is permanently showing as Type 2 when I check on the PS4, which appears to indicate that I am connecting via a router (which I am).
    Now, I do run an Xbox 360 but it's not powered on when I play the PS4, besides which the PS4 is in a DMZ so nothing the 360 does should cause a problem, unless it's down to UPnP switching port traffic to the 360 (though I have run with ports forwarded to the PS4 AND it in a DMZ to check).  The 360 is also permanently on Open NAT when I play Call of Duty.
    This all leaves me tearing my hair out (if I'd never ever managed to open the NAT I'd probably be less frustrated).  If anyone has any other suggestions on how to solve it I'd be extremely greatful, as (for the moment) it's turned my PS4 into a very nice looking desk ornament.

    Add the port '3074'
    i had same issue with ghosts on my ps4 used the suggested ports supplied by portforward.com no change still moderate but after reading through many various ideas and trying different versions i ended up just adding port 3074 to what portforward.com had already given and it worked.

  • Can I play Call of Duty Ghosts on my iMac (21,5" late 2013) with Windows 7 and Parallels

    Hey there,
    I Have an iMac 21,5" 8GB RAM 1024MB 2,9Ghz. I buyed it in Feburary. I want to play Call of Duty Ghosts on my iMac i use Win7 with Parallels. I don't know if it works? I already have Skyrim and Fifa 14 and they work very well. So I want to ask you if i could play CoD Ghosts without any problems.
    p.s. I dont really want to use Bootcamp only when ther is no other option.
    Thank you

    The simple answer is yes. As long as the computer meets the minimum system requirements.
    The long answer is....maybe.
    Parallels is a Virtual Machine for Windows, meaning that it runs on the Mac OS X Software. Bootcamp repartitions your HD and utilizes just the Mac's Hardware to run Windows using its own OS system files.
    If you have 2 games already that run in Parallels right now with no issues, then I don't see why this new game would not work. However if it does not, you may want to consider a Bootcamp parition in order to keep your Windows and Mac OS X partitions separate in the event of any OS problems.
    Good luck!
    -Captain

  • Satellite A210-1AP - video card stopped working playing Call Of Duty 4

    Hello,
    I am having problems with my video card.
    When I was playing call of duty 4 in 5 minutes my video card stops working and screen restart.
    Then it says Your video card stopped working, and problem solved.
    My video card is ATI Mobility Radeon HD 2600.

    > Then it says Your video card stopped working, and problem solved.
    And? Is it working now?
    Possibly the graphic driver hung and therefore you received this message.
    Its also possible that the GPU temperature was too high and therefore the message appeared.
    The COC 4 needs a lot of hardware resources and everything must run with full performance! Therefore there is higher heat dissipation and this can lead to graphic card issues.

  • I was led to believe a Xbox game pad can be used on an iMac to play call of duty, yet my mac doesn't recognise it

    I was led to believe that an Xbox game pad can be used to play call of duty black ops on the iMac. I cannot seem to get mine to work. Is there an app or something needed for the computer to recognise it ?

    I think Call of Duty doesn't support controllers due to the balance implications in multiplayer.

  • Connected to network, but cant make calls.

    So my phone is connected to the network, but cant make or recieve calls or texts, as well as use the browser.
    I recently dissasembled it, exactly how the videos said to on youtube, so im confident i didnt break anything when doing it, but maybe a connection inside or something is loose? Any suggestions? 

    Hi,
    Go to connections, and select Mobile data options. Run the diagnostic test.
    If you can pass the tests Run the following:
    Hi and welcome to the forums!
    Go to options advanced options, Host Routing Tables, click to enter. DO NOT click on any listing.
    Press menu key, and select register now.
    You will get a verification email. Then go to email settings and send service books.
    Some models like the Curve 8330 and Pearl require logging into the carriers BIS site
    via PC.
    You will get an email per account. Perform the battery pull and see if the problem is
    resolved
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Cant play "Cal of Duty 4" on my Portege M400

    Hi - my M400 doesnt let me launch COD4 despite loading it and running a test for DirectX9.0C - it appeared to pass this test.
    I think the specs in the PC are up to the min standard required but when I launch it, it crashes. Is there anything I can do or is this asking too much of my tablet? (Played it on my brothers Mac and its awesome"!)
    Specs required for the game are:
    Minimum:
    Intel(R) Pentium(R) 4 2.4 GHz or AMD(R) Athlon(TM) 64 2800+ processor or any 1.8Ghz Dual Core Processor or better supported
    512MB RAM (768MB for Vista)
    NVIDIA(R) Geforce(TM) 6600 or better or ATI(R) Radeon(R) 9800 Pro or better
    Recommended:
    2.4 GHz dual core or better is recommended
    1024MB RAM (2048MB for Vista)
    3.0 Shader Support recommended. Nvidia Geforce 7800 or better or ATI Radeon X1800 or better [

    The M400 has a weak graphics card in it that barely supports Vista's Aero Desktop system. The Intel 945 Graphics Chipset is not fully compatible with DirectX9 dispite what the checks say, some of the DirectX9 work is done via emulation on the CPU.
    As for Call of Duty 4, I doubt there is any chance of getting it working let alone a decent frame rate.
    I own an M400 and it was one of the things I knew would be a problem when I purchased it.
    Sorry :(

  • Procedure runs in SQL Plus, but not when called from my Oracle Form

    Hi. I have this code to send an email alert as the user updates a record on my base table from my Oracle Form. I use dbms_scheduler so that it's submitted as a background job and so the email processing does not delay my Oracle Form from saving quickly. If I submit this code in SQL Plus it executes and I receive the email as expected.
    begin
    dbms_scheduler.create_job ( 
         job_name            => 'IMMEDIATE_JOB', 
         job_type            => 'PLSQL_BLOCK', 
         job_action          => 'begin TTMS.dropperVacationConflict_Notify (62547, ''01-SEP-11'', ''02-SEP-11''); end;', 
         number_of_arguments => 0, 
         start_date          => sysdate +1/24/59, -- sysdate + 1 minute 
         enabled             => TRUE, 
         auto_drop           => TRUE, 
         comments            => 'Immediate, one-time run');
    end;However if I submit this code from a Post-Update trigger in my form the code runs without error, but my email is never received (the same parameter values would be passed to this trigger):
    begin
    -- Submit the email notification in the background so as to not slow down the screen while saving.   
    dbms_scheduler.create_job ( 
         job_name            => 'IMMEDIATE_JOB', 
         job_type            => 'PLSQL_BLOCK', 
         job_action          => 'begin TTMS.dropperVacationConflict_Notify (:dropper_vacations.dropper_id, :dropper_vacations.begin_dt, :dropper_vacations.end_dt); end;', 
         number_of_arguments => 0, 
         start_date          => sysdate +1/24/59, -- sysdate + 1 minute 
         enabled             => TRUE, 
         auto_drop           => TRUE, 
         comments            => 'Immediate, one-time run');
    end;     Any ideas why this might be happening?

    Wow, so I changed the two procedures so that I'm only passing in one number parameter and one char parameter...
    CREATE OR REPLACE procedure TTMS.job_vacationconflict_notify (p_dropper_id number, p_other char) IS
    CREATE OR REPLACE PROCEDURE TTMS.dropperVacationEmailURL_new (in_dropper_id number, in_other char) ISIf I execute it like this it works and I get the email:
    TTMS.job_vacationconflict_notify(62547, 99999);or like this it works and I get the email:
    TTMS.job_vacationconflict_notify(62547, '99999');But if I execute it like this (I get no errors) the email is not sent:
    TTMS.job_vacationconflict_notify(62547, 'ababa');So this problem really has nothing to do with date formats. It seems to have to do with whether parameter two has characters in it!!! What the heck.
    Any ideas on this?
    Here is the procedure I'm calling:
    CREATE OR REPLACE procedure TTMS.job_vacationconflict_notify (p_dropper_id number, p_other char) IS
    begin
      dbms_scheduler.create_job ( 
         job_name            => 'IMMEDIATE_JOB', 
         job_type            => 'PLSQL_BLOCK', 
         job_action          => 'begin TTMS.dropperVacationemailurl_new ('||p_dropper_id||','||p_other||'); end;', 
         number_of_arguments => 0, 
         start_date          => sysdate +1/24/59, -- sysdate + 1 minute 
         enabled             => TRUE, 
         auto_drop           => TRUE, 
         comments            => 'Immediate, one-time run');
    end;
    /And the above procedure is calling this procedure which should be sending the email alert:
    CREATE OR REPLACE PROCEDURE TTMS.dropperVacationEmailURL_new (in_dropper_id number, in_other char) IS
          myguid varchar2(15):=null;
          pcm_contact varchar2(3):=null;
          guid_contact varchar2(15):=null;
          conflict_cnt number(8):=0;
          -- Various declarations
          PSENDER VARCHAR2(200);            --  From
          PRECIPIENT VARCHAR2(200);         --  To
          P_CC_RECIPIENT VARCHAR2(200);     --  CC
          P_BCC_RECIPIENT VARCHAR2(200);    --  BCC
          PSUBJECT VARCHAR2(200);           --  Subject
          PMESSAGE VARCHAR2(6000);          --  Message Body
          PPARAMETER NUMBER;                --  Parameter Value
          guid_valid varchar2(15);          --  Used to grab the validation value of
          -- Grab name details of e-mail targets
          cursor targets is
          select guid, initcap(first_name) first_name, initcap(first_name)||' '||initcap(last_name) fullname
          from pwc_employee
          where upper(guid) = upper(guid_contact);
    BEGIN
            select count(*)
            into conflict_cnt
            from dropper_bundle_assign
            where
                dropper_sched = in_dropper_id and
                trunc(sched) <> '31-DEC-29' AND        
                trunc(sched) between '01-SEP-11' and '02-SEP-11' and
                trunc(sched) > trunc(sysdate);
            select distinct pcm
            into pcm_contact
            from dropper_bundle_assign
            where
                  dropper_sched = in_dropper_id and
                  trunc(sched) <> '31-DEC-29' AND        
                  trunc(sched) between '01-SEP-11' and '02-SEP-11' and
                  trunc(sched) > trunc(sysdate);
            select guid
            into guid_contact
            from pwc_employee
            where initials = pcm_contact;
        -- Ensure required parameters have been passed
        if guid_contact is not null
           and in_dropper_id is not null then
               Begin
                    select guid
                    into guid_valid
                    from pwc_employee
                    where upper(guid) = upper(guid_contact);
               Exception
                    when no_data_found then
                    raise_application_error(-20000,'Invalid Recipient.  Please check the employee table.  Please try again.');
               End;
               -- In the event there are multiple targets then we will loop thru and send individual emails
               for thisone in targets loop
                    PSENDER := lower(user)||'@us.ibm.com';
                    PRECIPIENT := lower(thisone.guid)||'@us.ibm.com';
                    P_CC_RECIPIENT := lower(thisone.guid)||'@us.ibm.com';
                    P_BCC_RECIPIENT := 'ssbuechl'||'@us.ibm.com';
                    PPARAMETER := TO_NUMBER(lower(in_dropper_id));
                    PSUBJECT := 'TEST: Dropper Vacation '||in_other||' Conflict Notification for dropper '||in_dropper_id||' - Action Required';
                    PMESSAGE := thisone.first_name||'-<br><br>There is an induction conflict due to a new or updated dropper vacation.<br><br>Click here to the dropper''s vacation conflicts: <u><a href="http://9.35.32.205:7777/forms/frmservlet?config=TTMSMENU&form=dropper_vacations&otherparams=p_dropper='||PPARAMETER||'">Dropper Id: '||PPARAMETER||'</a></u> (note: use your Oracle credentials when prompted for log-on information).<br><br>Thanks.';
                    SEND_MAIL ( PSENDER, PRECIPIENT, P_CC_RECIPIENT, P_BCC_RECIPIENT, PSUBJECT, PMESSAGE );  -- Procedure to physically send the e-mail notification
               end loop;
        else
              raise_application_error(-20001,'Recipient and Parameter Value are required. Please try again.');
        end if;
    exception
        when no_data_found then
             raise_application_error(-20002,'Note: Email will not be sent because no PCM was identified as the manager or the PCM does not have a record in the Employee table.  See ITS for assistance.');
         when too_many_rows then
             raise_application_error(-20003,'Note: Email will not be sent because multiple PCMs manage this dropper. Please notify each PCM manually.');
    END dropperVacationEmailURL_new;
    /Edited by: sharpe on Aug 17, 2011 4:38 PM
    Edited by: sharpe on Aug 17, 2011 5:03 PM

  • CISCO SPA122 with Skype, makes calls but cant receive calls!

    Configured SIP, Channel, and assigned Skype phone number to SIP, changed password and configured; seems pretty simple!
    Out going calls work well but can't call in. Skype logs show calls going to the number and being forwarded to the SIP.
    Nov 20, 2014,
    14:07
    From: +16509954758+16509954758
    To: +15594626288+15594626288 (forwarded: +99051000254482)
    Forwarded Inbound call
    $0.000 /min.
    0:00
    $0.000
    On the Calling phone, I can hear it ring twice then goes busy.
    I've tried picking up the SPA122 connected phone when calling but only get a dial tone.
    Any Suggestions besides contacting Skype?  Tried 4 times and they are clueless!

    I'm not author of the hint in question.
    Murphy's laws, Allen's Axiom (it's name is just unintentional coincidence with your name):
    When all else fails, read the instructions.

  • Playing Call of Duty II on my new MacBook Pro... Not Good!

    Hey
    Just bought a brand new MacBook Pro with ALL the trimmings - and Call of Duty II makes my mac run like I was playing on a Commodor 64.
    Does anybody had the same experience - and have you found patches or updates that fixes this problem?
    Thanks!
    Mikkel

    Well, I can offer some things that helped me out *a lot*.
    First, I also suffered interminably from my MacBook Pro's malaise while doing 3D gaming-- wondering why I was running games so poorly on a piece of iron that was relatively recent. So, here are the solutions I tried in order.
    1) Increased my 2GB of RAM to 3GB of RAM via a Crucial.com RAM purchase. Cost me $100 bucks. I think it was worth it for my gaming and other needs. I have to say that this change alone I did before I ran the Call of Duty 2 demo. I own Crysis and found that the expanded RAM only improved my gaming slightly (~30%). With Crysis and 3GB of RAM, I still had chunky gameplay and I found that 1024x768 was largely unplayable when there was a lot of action on the screen.
    2) I made sure that both Bootcamp and Windows XP had all of the latest software updates. Run "Automatic Update" from XP (I'm assuming you're running XP) and then use Apple's "Software Update" mechanism (search for it, if you can't find it) that Apple has built into Windows in order to update Apple's software on the Bootcamp side of the house, too.
    3) I downloaded the "Mobility Modder" application (you can get it at driverheaven.net for free) that runs under XP and Vista. Someone else on the forums suggested it, and I also recommend it. It let me tweak the settings of my ATI Radeon card (check to see if your brand and model of card is supported) and then download the latest drivers for my MacBook Pro. (Personally, I have an ATI Radeon X1600 card in my MBP.) The app is free. Also, when you download the new ATI drivers you get this "free" application called EarthSim. It's very cool and when I plugged my MacBook into my HDTV using a DVI-->HDMI cable, it was beautiful seeing the earth on the screen. Absolutely gorgeous!
    4) Finally, ensure you download an app like WinClone and backup your Windows partition before you start tweaking stuff (or after, if you're feeling adventurous). I find that it took me eons to get all my software working correctly in XP and it prevents a major re-installation of stuff should you change a setting on something that suddenly hoses something.
    5) Lastly, there are those pesky graphics settings in Call of Duty 2. Do not let the app make the "recommended graphics suggestions" for you! It'll give you horrible eye-candy. I haven't copied down my settings (to share with you), but I can tell you that I changed it to 1024x768. Turned on 2x anti-aliasing. SyncEveryFrame was set to OFF. I also turned OFF the other setting underneath SyncEveryFrame. Most other stuff I turned on or set to at least NORMAL. Naturally, YMMV.
    I manually changed almost all of the settings to try to take advantage of the "new" horsepower my MacBook Pro was packing with the Mobility Modder app having put me in fighting shape.
    Good luck!
    Brian
    <edited by host>

  • Why can't I play call of duty 4 on my matchbook pro early 2011?

    I have recently purchase the call of duty 4 from the mac app store it took my mac from 10 pm till 5am the next day to download the game on a fast wify home connection ,when it finaly dowload I start playing the game first thing I nottice was the sreen was frezzing up, well I continue to play with the screen doing that play the game first mission like that ,but wen I got to the second mission my mac just froze up ???????
    then I when and unninstall the app ,reinstall it ,play it againg nothing change still doing the same thing it was doing before ,so I whent to the game  support website , I found a patch to dowload for my mac ,download it try to istall it ,massege came up telling me that the call of duty 4 ap was not install corectly ,so I when back unninstall the app for the second time reinstall it one more time nothing change the game still doing the same thing is frezzing up is really frustrating this hole thing it just suck ............can anybody help me understand this please ,and yes my macbook pro is an early 2011 2 ghz intel core i7 ,500gb ,4GB 1333 MHz DDR3  ................

    What model is your Mac? It's under the About this Mac > More info (Apple menu)
    Go to energy saver and disable graphics swtiching, if you don't see it, then you don't have a "3D gamers" laptop or a video card strong enough to run the game.
    Only a 15" MacBook Pro 2.2 Ghz or better can run the game as it has a stong video card.
    Intel HD 3000 graphics only Mac's need not apply.

  • Bootcamp with windows 7 pro 32bit playing call of duty 4 modern warfare

    i hope that this topic is correct in this forum..recently boot camp with windows 7 professional 32bit and install call of duty modern warfare and run the game..when i play the game..everything run smoothly..however when i press escape and goes into the pause menu..my screen hangs there..i can't move my mouse..y is it so?anyway to fix this?however when i press escape back..it goes back into the game after some time..hope i can get some help here..thanks..: )

    I have exact the same problem with COD4 and my iMac and thought I'm the only one so far. So I'm sure, it is not an hardware issue, but a driver issue (esp. since the bootcamp 3.1 drivers are really outdated). Installing the latest ATI mobility catalyst drivers (i.e., 10.6) helped me at least a little by making this screen blanking somewhat more rarely but didn't solve it completely. However, I guess we have to wait until Apple fixes the iPhone issues first until they can gather some resources to update the bootcamp ATI drivers from *NOVEMBER 2009*!

  • Qosmio X300 - Crashes while playing Call of Duty

    Hey,
    I bought Call of Duty: Modern Warfare 2 couple days ago and when I play the game for like 30-60 min, my screen turns black, and my sound freezes; starting to sound like a chainsaw.
    I've downloaded the latest graphic driver, but it didnt help. Anyone have a clue of what I can do?
    I run a Qosmio X300 32bit Vista Intel Core 2 Duo Cpu T9600 @ 2,80 GHZ, 4GB RAM the game runs fine, but its starting to get annoying to turn off and on my computer every half an our to play the game.
    Any help would be appreticated.
    Regards Blood$urge ;)

    Could you please update me on this issue (X300-15G)? I have same issue here.
    Nvidia crashed Nwn2 with the supported out of date driver, so updated to a newer version 195.62, but the gpu went above 100C and laptop auto switched off to prevent damage.
    So then I used a large fan in my room directed on the laptop, I had to wear sweater as to not to catch flu, not joking, but this way the game never crashed (tested through about 24 hours including 8-hour non-stop) and laptop never switched off. I dont want to do this though. and I know that unsuported drivers are to be used on one's own risk, but I thought I bought a gaming computer, so you see I need to do something to play...
    Older driver crashed nwn2, crashed civ4 if I set antialias, showed texture artifacts in homm4 etc, so you see supported driver is useless for playing - at least older - games on win7 x64. It is extremely out of date.
    I will try a full recovery from scratch someday (actually I donot think it will fix anything regarding mentioned games), but until then please inform me if there is a better fix.
    Btw, In my oppininon it is not fair from toshiba that it does not release up-to-date nvidia drivers for X300 series, since supposedly this is a gaming laptop.

  • Performance issues while playing Call Of Duty Modern Warfare 2.

    Hey.
    I've noticed something really annoying when playing the game Call of Duty Modern Warfare 2 through Boot Camp (booting native of course) on my iMac.
    It all runs smooth the first and maybe the second session, but when I continue to play for 3+ sessions it takes a LONG time for the game to load at the beginning of each map. Sometimes it's not even possible to do anything for almost 3 minutes straight.
    It's extreme delay (like I had 0.1 FPS) and it continues to be like this for 3 minutes (or more), but it stops when I've played a while on the map. But then again, next map, it's the same story. I don't have any problems with any other game.
    However, when I quit the game and start it up right after, it stops but starts over again. I can play smooth the first few rounds, then delay.
    Anyone else have this problem?

    Hey XS...Sounds like memory or cache problems to me. How much memory do you have? Are you playing on XP, Vista or Win 7? Make sure you have all the updates that are available installed, such as, Apple Software Update (from within Windows ???), Windows ??? Updates themselves, and the latest COD/MW 2 updates.
    I've just finished playing COD Modern Warfare 2 on my Mac and it was awesome. The graphics and scenery are unbelievable. Gameplay was smooth and very responsive. I detected no lag. Not sure how to check the fps though.
    I have noticed that after the Windows Vista Desktop appears I have to wait about 2 minutes for Win to complete booting up. Probably something in the background. If I try to launch COD too quick then I sometimes get this "Steam" file compatibility alert. The same is true for quitting COD. I have to wait the same 2 minutes before I can reboot back into Mac OS. Too quick here causes a lot of delays and once a lockup that required a hard startup. Other than that no problems. There could also be some online communications in the background slowing things up. I believe a couple of inadvertent key presses could connect you to the Steam Online Community during gameplay but I'm not sure. I'm not very Windows savvy.
    Game Problems: I had a couple of glitches at first that required a reboot but that seems to have been resolved with the latest in-game app update.
    Also, my Boot Camp experiences have been flawless to perfect so far. Knock on wood.
    My setup-
    OS: OSX 10.6.2
    Processor: Mac Pro 2 x 2.66GHz
    Memory: 6 GB RAM
    Video Card: 512 MB nVidia 8800GT, Apple 23" Cinema HD Display
    Windows OS: Boot Camp 3.0.1 installed XP/Vista on separate, partitioned 250 GB internal HD (35GB / 215GB)
    COD/MW 2 Installed: Standard install on Win Vista Ultimate partition
    Suggested-
    OS: Windows Vista / XP / 7
    Processor: AMD 64 3200+ or Intel Pentium 4 3.2GHz or better
    Memory: 12 GB free HD space /1 Gb RAM
    Video Card: Shader 3.0 or better, 256 MB nVidia GeForce 6600GT / ATI Radeon 1600XT or better

Maybe you are looking for

  • IMessage on Mac and iPhone ?

    I have two questions: 1 - I left my mac at my home country and am in different country. I am currently using my iPhone with a new number and receiving imessages from my friends. Will these messages be automatically sync/pop up in my Mac. Does it mean

  • Pdf's won't display - get 403 access denied message

    And I apologize if this is answered previously. I'm new to Mac (from Windows for years) . I have read some old threads on this from 2005 or early 2006 and top of thread screen indicated topic closed (or something like that.) Problem: trying to access

  • Extensions for DW8

    I download an extension (Behaviors), installed it but cannot use it. When I go to TAG Behaviors, the new extension option is greyed out. Is there a 3rd party software to install plug ins to DW8 or do I need to upgrade to a new version of DW? Thanks

  • Help Ipod 5th Gen not charging! :(

    i have an ipod 5th generation and my charger is playing up (what a suprise) when i plug my charger into the plug socket and to my ipod my ipod turns on, but it does not say that it is charging and then goes off within 10 minutes this does this over a

  • Access level to users at specific fields

    Dear Techies, I am new guy In BO and also to this forum icon_smile.gif I am designing my universe and now i little concern I want to design one universe for 5 departments in company and then i want to give specific rights for users for specific field