Im Server not connecting within Convergence interface with two JVMS

Hi All,
We are currently seeing issues with out current environment.
We have two instances of Convergence running on the same server behind a layer 7 F5 switch talking back to one IM server.
I have attempted to set up two httpbind and avatarbind JID's in the configuration.xml for each IWC instance as the documentation suggests to do when you have multiple instances of Convergence talking back to one IM server.
After setting this up, i was unable to connect through on either Instance.
When I go back to my original config with one httpbind and one avatar bind we are able to use only one instance with IM.
has anyone been able to configure two instances with an F5 as a SLBP
Any Suggestions would be much appreciated.
Thanks
Rob G

Gardor wrote:
We have two instances of Convergence running on the same server behind a layer 7 F5 switch talking back to one IM server.
I have attempted to set up two httpbind and avatarbind JID's in the configuration.xml for each IWC instance as the documentation suggests to do when you have multiple instances of Convergence talking back to one IM server.Refer here:
http://wikis.sun.com/display/CommSuite6U2/Convergence+1+Update+2+Initial+Configuration
"Configuring Multiple Instances of Convergence with One IM Server"
Regards,
Shane.

Similar Messages

I have a RCA media streamer that will not connect to my network with a new airport extreme.

I have a RCA media streamer (Model # DSB872WR) that will not connect to my network with a new airport extreme.I had to create a new network and my computers are connected but media streamer will not. Can anyone help? Thank you

Hi, papineaubill!
Welcome to The Canon Forums, and thank you for your inquiry!
We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market. If you live outside the United States, please click here and select your country or region for your support needs.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
Thanks for choosing Canon!

Dispatcher Running Server Not Connected

Hi,
I have the same problem on Windows 2003 Server EP6 WAS640 SR1 SP9
I have the WAS640 for ABAP with the Java Add In and the Enterprise Portal installed on top.
When I try to connect to the Portal through a browser I get the message:
Dispatcher Running Server Not Connected
In the JCMON I cannot start Server0 and I get the errors 1,2,3,4 and it tries to start and then goes to status STOPPED
Does anyone know the solution ?
My system was working, the last change I made was to authenticate users against an SAP system and then I did a reboot and now the J2EE won't start.
Any help is much appreciated.
Thanks,
Tomas.

some more info, this problem started after I configured the Portal to authenticate against the SAP system
In the portal system log for server.0.log there is the following info:
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: Anonymous principal not configured
     at com.sap.engine.services.security.login.SecurityContext.setAnonymousPrincipal(SecurityContext.java:504)
     at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:150)
     ... 5 more
Caused by: com.sap.security.core.server.userstore.UserstoreException: Could not get user J2EE_GUEST
     at com.sap.security.core.server.userstore.UserContextUME.engineGetUserInfo(UserContextUME.java:187)
     at com.sap.engine.services.security.userstore.context.UserContext.getUserInfo(UserContext.java:87)
     at com.sap.engine.services.security.login.SecurityContext.setAnonymousPrincipal(SecurityContext.java:498)
     ... 6 more
Caused by: com.sap.security.api.NoSuchUserAccountException: USER_AUTH_FAILED: User account for logonid "J2EE_GUEST" not found!
     at com.sap.security.core.imp.AbstractUserAccount.<init>(AbstractUserAccount.java:334)
     at com.sap.security.core.imp.DBTextFileUserAccount.<init>(DBTextFileUserAccount.java:56)
     at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:339)
     at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:277)
     at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:371)
     at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:366)
     at com.sap.security.core.server.userstore.UserContextUME.engineGetUserInfo(UserContextUME.java:183)
     ... 8 more
#1.5#00A0D1BC74B6001E0000000C0000118C0003F7536153ADF0#1116362417365#/System/Server##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_51##0#0#Error#1#/System/Server#Plain###Core service security failed. J2EE Engine cannot be started.#
#1.5#00A0D1BC74B6001E0000000E0000118C0003F7536153BD59#1116362417365#/System/Server##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_51##0#0#Fatal#1#com.sap.engine.core.Framework#Plain###Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.#
Is it possible to reset the configuration back to what it was, or back to a default configuration\like in EP5 ?
Thanks,
Tomas.

Dispatcher is running, but server not connected

Hello,
When I load the portal with the link http://sapbw:50000/irj/portal the page display this error
"Dispatcher is running, but server not connected"
In the log file defaultrace.trc is this details
#1.5#000F2097D58D004100000CC0000013C00003F973E869EFAE#1118701161401#com.sap.engine.services.servlets_jsp.Deploy#sap.com/webadmin#com.sap.engine.services.servlets_jsp.Deploy#J2EE_GUEST#18####23d60950dc5911d9bc08000f2097d58d#SAPEngine_Application_Thread[impl:3]_18##0#0#Error##Plain###Error occured in invoking event "valueUnbound()" on listener class com.sap.engine.webadmin.control.WebAdminClusterTreeGenerator. The http session is ApplicationSession[id=(sapbw_DBW_00)ID3830150DB20054430341437593419End]. The attribute is com.sap.engine.webadmin.TREE_GENERATOR. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: Method removeAttribute() is called in an invalid session.
     at com.sap.engine.services.servlets_jsp.server.runtime.client.ApplicationSession.removeAttribute(ApplicationSession.java:640)
     at com.sap.engine.webadmin.control.WebAdminClusterTreeGenerator.valueUnbound(WebAdminClusterTreeGenerator.java:331)
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebEvents.sessionValueUnbound(WebEvents.java:410)
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebEvents.sessionValueUnbound(WebEvents.java:404)
     at com.sap.engine.services.servlets_jsp.server.runtime.client.ApplicationSession.invalidateSession(ApplicationSession.java:287)
     at com.sap.engine.services.servlets_jsp.server.runtime.client.ApplicationSession.validate(ApplicationSession.java:138)
     at com.sap.engine.services.servlets_jsp.server.runtime.client.ApplicationSession.removeAttribute(ApplicationSession.java:637)
Thanks very much for you help
Dayana

Hi Dayana,
This message occurs while the server is starting i.e starting the core services and delpoying the applications. From the above error message it is hard to
say what the problem is. Can you explain more on what is happening? Also generally it takes about 15 -25 minutes depends on the environment.
Also do you see any errors in the following log files
\usr\sap\XXX\JC00\work\std_server0.out ?
Regards
-Venkat Malempati

Dispatcher Running; Server Not connected - J2ee Pos installation problems

Hi,
Got problem with starting J2EE Engine.
The message in the browser:
Dispatcher Running; Server Not connected - J2ee Pos installation problems
Chked up in the log files:
RFCEngine Server startup stopped.
com.sap.mw.jco.JCo$Exception(129)-JCO_Error_Server_startup
version of rfc driver is invalid.
Any help
Thnx
Meesum

Hi Rohin,
Is it true that jdk must be > 1.4.
Because I came across many places where it is explicitly stated that WAS 620 supports only jdk 1.3. pls let me know
Thnx anyway
meesum

Dispatcher running but message server not connected

Hi Guys,
I installed SAP netweaver 7.01 trial version and using MaxDB as database server.
When I start the NSB using SAPMMC, the message server is running but the disp+work.EXE is not working properly. It sometimes shows the status 'Running but message server not connected' and sometimes 'Running but que standstill'. It would be a great help if you could guide me to the solution of this problem.
DEV_MS file:-
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 2148] Sat May 14 18:02:00 2011
[Thr 2148] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   560 (PC with Windows NT)
relno      7010
patchlevel 0
patchno    0
intno      20020600
make:      multithreaded, ASCII, optimized
pid        1484
[Thr 2148] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 1484) [msxxserv.c   1853]
[Thr 2148] MsInitAclInfo: acl file F:\SAP\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 2148] MsGetOwnIpAddr: my host addresses are :
[Thr 2148]   1 : [10.10.0.10] DESKTOP5 (HOSTNAME)
[Thr 2148]   2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 2148]   3 : [192.168.1.8] desktop5 (NILIST)
[Thr 2148] Sat May 14 18:02:01 2011
[Thr 2148] MsHttpInit: full qualified hostname = desktop5
[Thr 2148] HTTP logging is switch off
[Thr 2148] set HTTP state to LISTEN
[Thr 2148] ms/icf_info_server : deleted
[Thr 2148] *** I listen to port sapmsNSP (3600) ***
[Thr 2148] *** I listen to internal port 3900 (3900) ***
[Thr 2148] *** HTTP port 8100 state LISTEN ***
[Thr 2148] CUSTOMER KEY: >S1138463071<
[Thr 2148] build version=701.2008.03.06
[Thr 2148] Sat May 14 18:03:20 2011
[Thr 2148] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from desktop5_NSP_00 [msxxserv.c   4711]

DEV_DISP file:-
trc file: "dev_disp", trc level: 1, release: "701"
sysno      00
sid        NSP
systemid   560 (PC with Windows NT)
relno      7010
patchlevel 0
patchno    7
intno      20020600
make:      multithreaded, ASCII, optimized
pid        2740
Sat May 14 18:02:02 2011
kernel runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2740) [dpxxdisp.c   1257]
     shared lib "dw_xml.dll" version 7 successfully loaded
     shared lib "dw_xtc.dll" version 7 successfully loaded
     shared lib "dw_stl.dll" version 7 successfully loaded
     shared lib "dw_gui.dll" version 7 successfully loaded
     shared lib "dw_mdm.dll" version 7 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sat May 14 18:02:11 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 9 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >desktop5_NSP_00                         <
DpShMCreate: sizeof(wp_adm)          8232     (1176)
DpShMCreate: sizeof(tm_adm)          3786880     (18840)
DpShMCreate: sizeof(wp_ca_adm)          1280     (60)
DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1296)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 057F0040, size: 4389744)
DpShMCreate: allocated sys_adm at 057F0040
DpShMCreate: allocated wp_adm at 057F1BF8
DpShMCreate: allocated tm_adm_list at 057F3C20
DpShMCreate: allocated tm_adm at 057F3C50
DpShMCreate: allocated wp_ca_adm at 05B904D0
DpShMCreate: allocated appc_ca_adm at 05B909D0
DpShMCreate: allocated comm_adm at 05B90E80
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05C11D30
DpShMCreate: allocated gw_adm at 05C11D70
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05C11DA0
DpShMCreate: allocated wall_adm at 05C11DA8
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
Sat May 14 18:02:12 2011
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Sat May 14 18:02:13 2011
***LOG Q0K=> DpMsAttach, mscon ( desktop5) [dpxxdisp.c   12204]
DpStartStopMsg: send start message (myname is >desktop5_NSP_00                         <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0   monitoring and alerting switched off.
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1048]
DpMsgAdmin: Set patchno for this platform to 7
Release check o.K.
Sat May 14 18:02:53 2011
my types changed after wp death/restart 0x9f --> 0x9e
my types changed after wp death/restart 0x9e --> 0x9c
my types changed after wp death/restart 0x9c --> 0x98
my types changed after wp death/restart 0x98 --> 0x90
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat May 14 18:03:03 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Sat May 14 12:33:03 2011
========================

Mac is not connecting to network systems with names it's only connecting with the IP address why?

Mac is not connecting to network systems with names.
It's only connecting with the IP address why?

It sounds like a problem with the domain name server. Be sure you are using the correct DNS in System Preferences > Network, and if you are make sure it is functioning correctly.
Best of luck.

My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem. Windstream tech service is useless. i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help! windstream said everything is working on their end, yea right. What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products.
these are brand new machines with lion.
This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great. Please help before my wife losses it
thanks

There is a 2701HG-B, and a 2701HG-D. If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
By the way tell your wife it isn't that bad. At least you have an ethernet DSL modem. There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access. At least now only the craziest DSL providers still use those modems.

Connect one Business system with two Integration Server

Hello,
Can we able to connect one Business System with two Integration Server?
I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
Is this possible ?Is there any work around solution there?
Thanks.

Hello ,
This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14 .
I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14 ?
Thanks.
Lakshmi
Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

I can't retrieve email, server not connected, at work, on my ipad mini

I can't retrieve email, server not connected, at work, on my ipad mini

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

HT4970 I bought a printer Polaroid POGO, MINI PRINTER. I can not connect it via Bluetooth with my iPhone 4. Is there an app to solve this problem, because I'm Judicial Medical Expert, and I need this tool for quick things. grateful

I bought a printer Polaroid POGO, MINI PRINTER. I can not connect it via Bluetooth with my iPhone 4. Is there an app to solve this problem, because I'm Judicial Medical Expert, and I need this tool for quick things. grateful
Max Cavichini
Medical Legal Expert
Problem ipad and i phone

This has never been a feature of iphone,ipod touch or ipad.

I can not connect my i phon with my pc it shows athorised computer when i am trying to do authorised process the process done but again i connect my phon again show this errore please help me to solve my prob....

i can not connect my i phon with my pc it shows athorised computer when i am trying to do authorised process the process done but again i connect my phon again show this errore please help me to solve my prob....

I have clicked on the connect button, but it brings up the same There is a problem connecting, and I have also tried SMB://
i tried pinging the ip address with in termial and it times out.
From my windows PC and I can access my MacBook Air just fine,

Regularly get "Server Not Found" then always works with a retry. Why

Regularly get Server Not Found" then always works with a "retry".
== This happened ==
Every time Firefox opened
== I started using Firefox

Issue
I have another kind of problem with Firefox
Description
Regularly get Server Not Found" then always works with a "retry".
This happened
Every time Firefox opened
I started using Firefox
Firefox version
3.6.3
Operating system
xp windoes
User Agent

How to create one soap interface with two soap action?

Hi,
I need to create one SOAP Interface with two or more webmethods (soap action), for example:
Interface: MI_Outb_User
Webmethods: createUser, searchUser, deleteUser.
Can anybody helpe me?

Hi Santos,
I assume you will use one action at a time and depending upon certain condition you want to invoke the webservice and the corresponding action. If this is yes, then please check michaels reply in this thread:
How can I handle serveral soap actions
or see stefans reply:
Re: Is SOAP Adapter Action field can contain 2 or more "SOAP Actions"
If this is not, then please ignore it.
Regards,
---Satish

Just resolved Back to my Mac issue called Apple Suppport in the UK and they were really helpful if the error DNS server not responding the problem is with Apple server not your server ( I had tried to reboot by router, restart my laptop etc.

I was having problem with my Back to my Mac as message was saying DNS Server not responding . I tried to turn my WIFI off, then my router to no avail. Decided to call Apple Support line in the UK . I got a call back immediatly and great support. The advisor took over my screen and we check that my laptop was synchronising with I phots and it was. The adviser also told that when the message DNS server is not responding next to Back to my Mac is has to do with Apple Server not mine , router etc... Hope this save others some time! Rather than spending time truining on and off changing IP address etc...

Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.

Im Server not connecting within Convergence interface with two JVMS

Similar Messages

Maybe you are looking for