Im so confused! i need help! my computer crashed, now my cards arent good...:(
ok so heres the problem... i was downloading itunes latest version, and i was also on the itunes store. i redeemed a $15 dollar card and a $25 dollar card, then my computer crashed and my account ran dry to the amount beofre at .92 cents. now when i go to re-enter the code it says the cards already been used when i only bought one song.
try signing out of iTunes and sign back in
you can do this by:
-going to store menu at the very top of your page (usually located up there with file,edit,view,and controls)
-from the store menu, choose the "sign out" option
-sign back in using the same move
-credit balance should update to the correct balance
hope this helps:)
Similar Messages
-
ok this might be a really dumb question... but ill ask it anyways. my computer just crashed and all the programs got erased. i didnt get a chance to back up the music that is currently in my iPod nano (1st generation). if i download iTunes again and install the nano software will i lose all the music in my nano right now? or can i put the music from my nano into the new iTunes library after downloading it. im not very computer literate (i got the nano to run with) so a simple explanation would be fabulous!
thanks
dell Windows XP"if i download iTunes again and install the nano software will i lose all the music in my nano right now
If your iPod is set to update automatically you just need to take care when connecting back to your computer and an empty iTunes. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No* (or "Cancel" if you are using iTunes 7). Pressing "Yes" (or Erase and Sync in iTunes 7) will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. In iTunes 7 check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing content manually on iPod
"can i put the music from my nano into the new iTunes library after downloading it"
You can't sync or drag your non iTMS music back directly from an iPod to iTunes. The transfer of non iTMS content is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. You can read reviews of some of these here: Wired News - Rescue Your Stranded Tunes
YamiPod Mac and Windows Versions
iGadget Windows Only
iPodCopy Mac and Windows Versions
iPod Access Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only
CopyPod Windows Only
The transfer of purchased content has recently been introduced with iTunes 7, look under under File>"Transfer Purchases from iPod". A paragraph on it has been added to this article: How to use your iPod to move your music to a new computer
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again. I would also advise that you get yourself an external hard drive and back your stuff up in case you have problems again. External drives are comparatively inexpensive these days and you can get loads of storage for a reasonable outlay. -
Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks
You could try a SMC reset:
http://support.apple.com/kb/HT3964
If no change, do what Allan advises.
Caio. -
I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!
There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore -
I need help fixing itunes crashes on my old mac
i need help fixing itunes crashes on my old mac
Thanks for your reply,
I have both the silver discs specific to my iMac and Mac Pro models that you receive with your Mac, and a general copy of Snow Leopard that you buy from the store.
I used the silver disc that is specific for my iMac to install the drivers, and Boot Camp 3.0 on my iMac. But with the Mac Pro, the software is older and only has Boot Camp 2.0, thus I'm wondering if I can simply use the software on the general copy of Snow Leopard I own, or does the silver disc contain specific drivers for my Mac Pro that I need?
I'm under perhaps the wrong impression that the silver discs that you get with your Mac purchase contain drivers for your specific Mac model which you can't get from the general Snow Leopard disc.
Thanks. -
I need help with my i tunes gift card(exchangable) that is damaged.Help please!!
iTunes Store: Invalid, inactive, or illegible codes
-
Please help me. This is a terrible situation. Last night, I was making a movie with iMovie and trying to find a way to export it that would be compatible with the item on which I am going to be displaying it (an Epson MovieMate via a USB Thumb Drive). I was SO frustrated that none of the formats iMovie could export in were compatible with the MovieMate, and also frustrated that the software I found to convert it from one of the iMovie formats to a format usable on MovieMate wouldn't convert the entire movie for free in its trial version, only half the movie.
Desperate for a solution, I was going through all the different ways iMovie could export, and I found it odd, but I found this jpeg one. Knowing that jpeg is a format for still photo files, it did strike me as odd, but I thought I would give it a try and see what would happen. After all, my "movie" is just one still photo with music playing for a half-hour. It said it would take over 40 minutes to create the "movie," so I went to bed.
To my shock, when I got up this morning, my computer was freaking out. It said that it had no more memory left or something like that, and prompted me to quit a bunch of open programs that weren't responding. I tried to do this, but it just wasn't handling things. Eventually the clock stopped progressing but I could still hear the processor working, so I just hoped it would work through the issue then snap out of it sort of, but instead, I eventually stopped hearing the processor sounds, and the cursor was also frozen. At this point I could see the whole computer was frozen, so I held down the power button for a few seconds to force the computer to turn off.
When I restarted it, it was trying to re-start all the applications I'd had open previously. After several minutes of trying to get it to quit all these things, it finally did, but nothing was displaying on my desktop yet. Normally there would be a HD disk image and a few folders. I had seen in a Finder window that there were tons of jpeg files supposedly on the desktop (where I had designated the file to save to), but I couldn't see how many. It never occurred to me that this is how iMovie would render things when I told it to save the project in jpeg format. I expected one jpeg file, not some tremendous and unknown amount.There may be hundreds or thousands if it created a jpeg for each "frame." Even if it created one jpeg file per second, that would be 1,800, and I suspect there's more than that. There could be several per second. Five per second would be 9,000 jpeg files. I hate to think but there may be a whole lot more than that even.
Finder continued to "think." I was never able to access it to do anything with it. There was a "stuck" Finder window which was displaying the Desktop folder, which is how I saw that there are multiple jpegs there. After a few minutes, I re-launched the Finder and was able to command it to not try to open a Finder window upon re-launch. After it re-launched, I could hear the processor working for a few more minutes. I think it obviously was working to display all the files on the desktop. The clock froze again, and the cursor movement was jumpy. Shortly, the cursor would not move anymore, and I could not hear the processor sounds anymore. The computer was frozen again. I held down the power button again to force it to shut down. When I re-started it, I logged into the Admin account (which I am using right now), which is the only way I think I can use my computer right now. I was also hoping I could access the files from the Admin account and just get them to display in a window so that I could delete them. I just want to delete them at this point. I wish I had never done this! I wish iMovie didn't even have that option or that iMovie would have explained to me what was going to happen if I were to proceed! I don't use my Admin account very often and wasn't really sure what it would be capable of doing. I can open a Finder window and access my Time Capsule, which contains something that looks like my hard drive image but when I double click on it, I get an error that says The following disk images could not be opened Macintosh.sparsebundle: Resource temporarily unavailable.
Anyway, please help! What do I do to get my computer back to normal??? I just want all those jpegs deleted and want to be able to log in and boot up like normal! This is a terrible situation as I use my computer for work and everything. I was needing to print some things for a presentation tonight. Please help me! Thank you!
Melanie
P.S. I just now got a Time Capsule backup message that came up and said Time Capsule could not complete its backup because Time Machine is unavailable! I am concerned this jpeg situation has gotten completely out of control and has gone beyond affecting my computer to also affecting my Time Machine!
(Also, additionally, assuming I can get my regular user account to boot up again at some point, if anybody happens to know how to get an iMovie file to save as .mpe, .mpg, .mpeg, .dat, or .vob, that information would be greatly appreciated.)It worked! Thank you! I finally just finished about 20 minutes ago! It took over 26 hours to complete the process you described, but I stuck with it and it worked. I am glad I didn't give up or "forget it" as some might have suggested. That would have set me back until tomorrow!
Ultimately, it turned out there were 45,910 jpgs created. No wonder it took so many hours to render/display them all. It ended up being about 10 hours before it seemed they were all rendered but the process between them displaying and being able to start really deleting them took a few hours because partly I was asleep and also partly it took forever to do anything. Any action as simple as selecting and right-clicking to Get Info, or emptying the trash, would take 20-30 minutes, a couple times longer. The clock stopped many times for 20-30 minutes at a time, a few times over 30 minutes, before catching back up. My cursor never froze which is what really kept me going, although it was a spinning beach ball for most of the time. I was never so relieved to see my regular cursor as opposed to seeing a spinning beach ball as I was early this morning after about 10 hours!
Once I was able to open a Finder window and select all 45,900 files (I had already deleted 10 in the previous couple hours during experimenting of trying to figure out what would work best), then right-click and select to move all the files to the trash, the process of moving them to the trash took 4.5 hours. Then deleting them from the trash took a couple minutes. There were 21.4 GB!!! No wonder the whole process took 26 hours!
mende1, thank you so much! -
Need help willing to pay NOW deadline!!!
Please email me here:
[email protected]
I need help NOW... We have a very serious deadline. I need a 20 min phone consultation from anyone out there that really knows. Final cut. Our aspect ratio is all messed up and we can not fix it. Please email breif credentials and we wil reply with phone number and cash thru PayPal.
Thx, AlexWell no one wants to call me so here goes: We have two sequences, a demo reel of our special effects (from multi artist) and our doc demo reel. The SE demo reel was squished tall every time we exported to QT. So we had one of our employees fix it by making it extra wide to compensate. Now when we export the SE demo reel is fine but the doc demo reel is exporting too wide now. It is as if the setting for the SE demo reel aspect ratio settings have changed everything including the doc demo reel. These export options are driving us crazy, we can't seem to get this thing back the way it was. I suppose we could change every clip's aspect ratio by hand to compensate for the stretching wide, in other words squish it tall again to make it come out right. The who originally changed the aspect ratio to fix the first problem with the SE Demo changed everything to 33.33 but we can not figure out what it original was before they went in and changed each clip of the SE Demo. Confusing I know... Please help we have to have these overnighted by 5PM today!!! Can any one save us? Thanks, Alex
-
Need acrobat download-computer crashed
I purchased different Adobe products around 2002. That included:
Adobe Web Premium C53
Adobe Acrobat 5.0.5 10/26/2001
The computer they were all on crashed. I do not have the disks, as they were stolen, along with all my programs and backups, during a burglary.
I needed to get the downloads, and when I spoke with support (took 30 minutes on hold), I was told they don't support CS53 anymore and I need to go to a "Forum", whatever this is.
My email is: [private information removed by moderator]
Can someone help me/
Hale BentonHi Hale,
I'm so sorry to hear that your computer crashed. That is never any fun.
Unfortunately, we no longer offer downloads of Acrobat 5.0 (the latest version we have available for download is Acrobat 8). But, if you're using a modern operating system, then Acrobat 5.0 wouldn't be supported anyway. You may want to consider an upgrade at this point.
I'm sorry I don't have better news for you.
Best,
Sara -
Need help on Solaris 10 with Infiniband card
I have Solaris 10 Update 10 running. I have Mellanox Infiniband card. All I can see that its detecting it as:
Code:
#/usr/X11/bin/scanpci | grep Mellanox
Mellanox Technologies MT26428 VPI PCIe 2.0 5GT/s – IT QDR / 10GigE]
#ls –R /devices | grep 15b3
Pci15b3, 22@0
Pci15b3,22@0:devctl
/devices/pci@0,0/pci8086,3410@9/pci15b3,22@0:
#pkginfo | grep –I infini
System SUNWeoib Solaris Ethernet over InfiBand
System SUNWib Sun InfiniBand Framework
System SUNWibsdp Sun InfiniBand layered Sockets Direct Protocol
System SUnWibsdpib
System SUnWibsdpu
System SUNWiopoib
System WUNWrpcib
#modinfo | grep infi
92 ffffffffefb0a000 b4d0 - 1 ibdm ( InfiniBand Device Manager)
250 fffffffffff08e2000 e9c8 170 I ibd (InfiniBand GLDv3 Driver 1.38)
Please help me if anything else need to be configure for making this card run.
I was following this doc http://docs.oracle.com/cd/E19241-01/821-2144-10/p21.html#scrolltoc but I wonder if it really needs Sun Firmware Tool since it does verify the Mellanox driver successfully.
Please guide on how to configure ib interface.
Edited by: 912582 on 06-Feb-2012 07:25
Edited by: 912582 on 06-Feb-2012 07:26Hi,
Below notes will help you
TECH: Calculating Oracle's SEMAPHORE Requirements (Doc ID 15654.1)
Semaphores and Shared Memory - An Overview (Doc ID 153961.1) - It has detailed explanations on parameters and calculation methods.
For more information, following are the kernel parameters and its possible values
Name Default Min Max Reference
shmsys:shminfo_shmmax 1048576 1048576 4294967295 Maximum shm segment size in bytes
shmsys:shminfo_shmmin 1 1 - Minimum shm segment size in bytes
shmsys:shminfo_shmmni 100 100 - Number of shm identifiers to pre-allocate
shmsys:shminfo_shmseg 6 6 - Maximum number of shm segments per process
semsys:seminfo_semmap 10 10 - Number of entries in semaphore map
semsys:seminfo_semmni 10 10 65535 Number of semaphore identifiers
semsys:seminfo_semmns 60 - - Number of semaphores in system
semsys:seminfo_semmnu 30 - - Number of undo structures in system
semsys:seminfo_semmsl 25 - - Maximum number of semaphores per ID
semsys:seminfo_semopm 10 - - Maximum number of operations per semop call
semsys:seminfo_semume 10 - - Maximum number of undo entries per process
semsys:seminfo_semusz 96 - - Size in bytes of undo structure, derived from semume
semsys:seminfo_semvmx 32767 - - Semaphore maximum value
semsys:seminfo_semaem 16384 - - Adjust on exit maximum value
msgsys:msgmap 100 100 - # of entries in msg map
msgsys:msgmax 2048 2048 - max message size
msgsys:msgmnb 4096 4096 - max # bytes on queue
msgsys:msgmni 50 50 - # of message queue identifiers
msgsys:msgssz 8 8 - msg segment size (should be word size multiple)
msgsys:msgtql 40 40 - # of system message header
msgsys:msgseg 1024 1024 32767 # of msg segments
thanks,
Krishna -
I need help with my $100 iTunes gift card I got they did not activate it right
Hay I need help I got iTunes card not activated right 100$
Note: iTunes Gift Cards are only Valid in Country of Issue.
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I need help with my videos now that I downloaded the ios6. It won't play.
I need help with my videos. I downloaded the ios6 and now they won't play. Does anyone know how to fix?
Wanted to let everyone know that after looking at other discussions I did a hard reboot and it is now working. Love this site!
-
Ok so I have built a function that will increase in increments that is specify and I am outputting it to a device to control it. Now this is the part i need help with I want to to hold at the setpoint that I can specify for a period of time then slowly decrease can anyone help im usisng labview 7.1
Attachments:
Niks Test.vi 167 KBIn that case, it can be greatly simplified.
The "Add 0" function obviously isn't doing you any good.
If you don't need it for timing, you can remove the Wait function.
The "Add 1" function and feedback node can be replaced with the "i" (iteration terminal).
A good rule of thumb for loops is: "If you know how many times it will run before it starts, use a For Loop. If the number of times it runs is uncertain, use a While Loop."
It looks to me like you want to generate an array that goes from Init+0.001 to SetPoint by steps of 0.001. The attached VI will do this.
I realize this doesn't solve your problem yet, but I think it puts us a step towards figuring out what to do next.
Can you check this out and tell us what else is needed?
Attachments:
Niks%20Test[1].vi 8 KB -
Okay my computer crashed... now i got it fixed and i have the few hundred songs on my ipod... no longer on computer
now every time i open itunes a note saying something to the extent of the ipod is registerd on another computer do i want to erase all files on ipod.. i hit no as i dont have the songs on the computer anymore... after hitting no the computer wont allow me to access the songs at all or update the ipod!
what do i do?Hi jagsgurl15,
Welcome to Apple Discussions
Copying songs from your iPod to your computer
"The iTunes library on your computer holds all the songs you've encoded from your CD collection or purchased from the iTunes Music Store. With default settings, iTunes automatically copies the songs in your library to your iPod. When you use your iPod as a hard disk, you can't see the songs iTunes copies to your iPod in the Finder or My Computer. This is normal. Using the Finder or My Computer, you can't copy these song files from your iPod back to iTunes or to any other computer. The synchronization between your iPod and your computer is always one way: from iTunes to iPod.
If you've erased the music library on your computer, there's no way to use the Finder or My Computer to copy the songs from your iPod to reconstitute the library on your computer. One solution is to encode the songs from your CD collection again, then sync your new library with iPod. If you purchased songs from the iTunes Music Store and didn't back them up, there's no way to download them again. You'll have to buy new copies of the songs."
Taken from Using your iPod as a hard disk
Can you get them from a backup off your old computer? Or didn't you do a backup?
Regards
Colin R. -
HELP, MY COMPUTER CRASHED AND I LOST MY LIBRARY!!!!!
My computer crashed and I lost my library. I have the songs on my ipod, can I put them back into itunes?
Yes, check this out
http://discussions.apple.com/message.jspa?messageID=797432#797432
Maybe you are looking for
-
whenever I try to sync my phone with itunes, it prompt with a window saying that this computer is not authorised. Although I again authorise my computer through store option but again while sync it shows the same window. I have reinstaled itunes also
-
Transformation in a Process Flow
Hi there, I am trying to use a transformation in a process flow and I am getting the following error - RPE-02040: Internal error: SOMEFUNC cannot be converted to a constant value. Please correct the value. I have a PL/SQL function SOMEFUNC(x, y) that
-
I walked up to my computer and i shocked it accidently and it all the sudden shut down. The battery is fully charged and everything and it wont turn on.
-
Working with Folders and Sub-Folders
I'm updating this big site, and its pages are organized into folders. I've only ever organized my images and .pdf files with folders not my html files but all my prior sites have never had so many files as this one. It's starting to drive me crazy th
-
How to tell what week the ipod is
How can i tell which week i got and if its a good one? Thanks!