Im so excited but i need opinions ?
im excited because i want to get the iphone 5s but i want to know from the people who have it if they had had any complaints or problems that u had to return it or need a replacement wich i doubt since the iphone 5s is new ! and i know this is a twchnical forum but i needed to ask (:
Answered in your first post already http://discussions.apple.com/message/23564224?ac_cid=sa123456#23564224
Similar Messages
-
Need opinions for laptop temperature!
Good day guys! I am really concern about my laptop temperature. Normal temperature is around 50-60 degrees Celsius, while in gaming around 80-85 but it reached 93 degrees already. I am using a cooling pad and my electric fan is directed towards my laptop especially while gaming. Are these temperatures still healthy? I am using real temp, core temp and Toshiba PC Health Monitor to monitor my processor and GPU temperature.
My laptop is Toshiba Satellite L745, Intel Core i5-2430, 1Gb nVidia GT GeForece 525M, 8gb ram, 32-bit Windows 7. I just bought this laptop last December 2011. I need opinions guys! Thanks in advance!This is the second post in 2 days dealing with overheating Toshiba Laptops while playing a game. It doesn't look like the Fans are moving enough air to keep the CPU and GPU cool enough during extensive video operations.
90 degrees Celcius is way too hot for processors...It doesn't take long to figure out that the Toshiba design is flawed and is very suspect to overheating. Heat will slowly kill the MotherBoard components.
You probably are NOT suffering from symptom/cause number 1. but double check anyway...the cooling pad may be sucking in MORE dirt/dust than the normal laptop cooling fan and then the dust will collect FASTER at the heatsink cooling fins. You may also be able to increase airflow with solution 2. to solve the overheating problem...
1. I recommend turning the Laptop Off and unplugging all accessories. Get a good Flash light and look down into the CPU HeatSink Cooling Fins (where the HOT air comes out) You should be able to see inside the area unrestricted. If you see a bunch of Grey Matter, it's more than likely clogged with dust bunny's restricting the airflow.
Get a can of compressed AIR. Get a vacuum cleaner and hose...no attachments. Turn the laptop upside down on a flat surface so that you have access to both the intake fan vents and the exhaust vents. (facing towards you)
I have a technique where I hold the vacuum nozzel direcly flat against the FAN IN-Take vent--with the vacuum on--I use the compressed air in 2 second bursts to clean out each of the narrow heat-sink vanes. (Not the open spaces in the plastic case, but each of the metal cooling fins)
Try to not use too much compressed air as it does have a tiny amount of liquid in it. You could also wait 30 or so minutes to let it dry.
It's a quick fix, but the alternative is to completely taking apart (on most Toshiba's) to get access to the heat sink and CPU.
2. If you don't see any dust or any more dust after blowing it out and it is still overheating...you could try what I did below...
I saw a youtube video where a guy rigged up an external 80mm fan with a shroud and duct tape. He powered the 12VDC fan with a battery, but I used one of those Variable Voltage Adapters...set it 12VDC and connected it with Aligator Clips. It didn't look pretty, but the external fan kept the laptop ICE cold.
"My comments are my own reality" Consider these in addition to other sources. I only know what I know.
Dan -
HT201318 i've paid for my icloud storage but now need a vat receipt, where can i get one?
i've paid for my icloud storage but now need a vat receipt, where can i get one?
Usually Apple sends an invoice to your mail 1-2 days after your purchase.
You may even search the invoice yourself, but I'm not sure if you will find it before 1-2 days.
More info here https://discussions.apple.com/message/12360444#12360444 -
I have a new mac book pro which i use in england but I need to use German charachters frequently, is there a way of having both visable on the keyboard?
For example so that I can just press shift or another key to get the German character.Some may already exist, but you will have to learn them. On my old system these can be found through keyviewer.app For example, if I press option+s I get ß Umlaut is a bit cumbersome as option+u then the actual letter. It may be possible to bind a key to do this function, possibly through System Preferences > Keyboard > Shortcuts
I have old, old references for utilities that let you rebind keys to other functions, and you would have to see if they have modern equivalents.
Ukelele Mac OS X Keyboard Layout Editor - http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele - mostly useful for character, not function mapping.
Check Butler, ikeys, quickeys or Spark -
I had to remove Mavericks and do a reinstall on 10.8.5 but still need help...
I have been trying to undo my Mavericks upgrade in October and after considerable effort I am mostly got back to 10.8.5 OS but still need a bit of help. I just want the previous OS back in place then I'll try Mavericks soon....
1) I never seem to pay attention so is 10.8.5 the last OSX prior? As long as it isn't Mavericks, I want to get it installed.
2) I had to reformat my iMac so I have a residual elements from 10.9 and one issue that I had before was permissions. Every number of files either on other hard drives or sometimes in my same user folder was asking for permission and authentication to simply move a file.. A popular one you'll see at the bottom the person/whatever/ problem known as fetching. Could someone just give me the general reason of this fetching and permissions problem that I ran into? Better yet since I just want to avoid it altogether into the future tell me what's the best way to assure it disappears forever.
3) Another, which is kind of a big ticket item for me is the backup/restore/cover your (!!!) system. I was a good little iMac User and had Time Machine backed up for a period prior to the Mavericks install. I'm a little bit upset that TM isn't 100%....but what is...? I need another backup/restore system in place and that's what I am looking for recommendations on. An item that saved me a bit was that I had OS 10.8.3 on an external hard drive. The problem with that one was it was on a partition, on one of the drives requiring to be reformatted. It worked as a bridge consolidating files and all but was a big headache as a partition on the external. Recovery Disk did it's part but wasn't enough as well. Is there a simple/easy idea...clone, disk images, boot from an external drive… ?
4) iPhoto (9.4.3) currently will not open the libraries which iPhoto (9.5) converted. Is there way to go back? Seems the App Store and Software update don't like something. I'm getting into a loop with App Store, iPhoto and the OS. Either the software needs operating system ... then the App Store says it's incompatible or some other complaint. Right now I have 9.4.3 iPhoto installed for OSX 10.8.5 and was only able to create a new library and the converted ones currently do not open.
Thanks to your help10.8.5 is the lates ML edition. I use TM and also carbon copy cloner as my second backup. If I were you and you have a TM backup prior to Mavericks I would try another restore at bootup. You should erase your drive first in that process using disk utitlites and then use TM to put back you apps and files. The other choice is to do an internet recovery and then use TM to restore your apps and files. That should fix the permissions issue. I did the same thing and all was OK including getting my original iPhoto progam (9.4.3), iphoto11 and photos back.
-
and need the new iTunes 11.1 to be able to use my iPhone on iTunes but I need the new mac software update OXS 10.6.8, but my mac doesn't need or have an update what should I do! I'm upset :'(
The requirements for iTunes:
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Your Mac must be able to run OSX 10.6.8. If you can run that OSX then you can run iTunes 11.1.
Which Mac do you have?
MJ -
If i reset my ipad can i install paye games for free if i sign back into my apple ID. Please i need help because i need to update my games but i need to put in this billing thing and i want to get rid of it so then i cant buy games with my credit card
Hello,
As frustrating as it seems, your best to post any frustrations about the iPhone in the iPhone discussion here:
https://discussions.apple.com/community/iphone/using_iphone
As this discussion is for iBook laptops.
Best of Luck. -
My old computer crashed and I got a new laptop but none of my music that is still on my Ipod will show up in Itunes. I don't know how to get it to import. Whenever I select the Ipod folder through my computer to Import my data nothing shows up.
All my music is still on my Ipod but I need it to show up in Itunes and I only have 3 computers that are authorized so its not like I can deauthorize all the computers and start over.
I now have Windows 8 and I'm completely confused over this new version of Itunes. I was having the same problem trying to figure out to import my music on Itunes from the old version with Windows 8 as well.
HELP PLEASE!!!!!The following user tip is worth checking through:
Recovering your iTunes library from your iPod or iOS device -
Problem with date format dd/mm/yyyy. But I need to convert yyyy-mm-dd.
Dear friends,
I have the problem with date format. I receiving the date with the format dd/mm/yyyy. But I can upload to MySQL only in the format of yyyy-mm-dd.
how should I handle this situation, for this I've created these code lines.But I have some problem with these line. please help me to solve this problem.
String pattern = "yyyy-mm-dd";
SimpleDateFormat format = new SimpleDateFormat(pattern);
try {
Date date = format.parse("2006-02-12");
System.out.println(date);
} catch (ParseException e) {
e.printStackTrace();
System.out.println(format.format(new Date()));
this out put gives me Tue Apr 03 00:00:00 IST 2007
But I need the date format in yyyy-mm-dd.
regards,
maza
thanks in advance.Thanks Dear BalusC,
I tried with this,
rs.getString("DATA_SCAD1")// where the source from .xls files
String pattern = "yyyy-MM-dd";
SimpleDateFormat format = new SimpleDateFormat(pattern);
try {
Date date = format.parse("DATA_SCAD1");
System.out.println(date);
} catch (ParseException e) {
e.printStackTrace();
System.out.println(format.format(new Date()));
this out put gives me Tue Apr 03 00:00:00 IST 2007
But I want to display the date format in yyyy-mm-dd.
regards,
maza -
Warning this is very long code but i need help to see if I am on right trac
I have done all the following code myself and it is the buisiness layer for my application. I have tried to follow recommendations on previous posts and I would like to be told where I can clean up my code and how? This is not complete and it looks very long to me but I need help in order to be better. There are 4 button vlivks and I have not completed them all. The criteria for application is that phonebook will accept new entries if they have names surnames and phone numbers that are not longer than 10 characters for display purposes but can change this. No duplicates are allowed. No editing of a existing entry must lead to a duplicate entry either. No new entry or edit may result in a new contact having no phone numbers.
Many thanks for your time in advance,.....
import javax.swing.JOptionPane;
import java.util.ArrayList;
public class Contact
{// Start of the Contact class
ArrayList<ContactDetails> phoneList = new ArrayList<ContactDetails>(); // To hold all the contacts
ArrayList<ContactDetails> searchList = new ArrayList<ContactDetails>(); // To hold all contacts that return true on search
ArrayList<ContactDetails> list = new ArrayList<ContactDetails>();
String newName; // To hold the new name
String newSurname; // to hold the new surname
String newHome; // To hold the new home number if any
String newWork; // To hold the new work number
String newCell; // To hold the new cell number
final int MAX_LENGTH = 10;
public boolean addToPhoneList; // Sets to false if there is an invalid entry
public boolean addToSearchList; // Sets to false if there is an invlid search
public boolean modifyContact; // Sets to false if there is an invalid modification
// Method to create a new contact
public void createNew()
{// Start of create new()
addToPhoneList = true; // Set boolean to true each time the method is executed
getNewContactsName(); // Get new name
if(addToPhoneList == false)
createNew();
return;
getNewContactsSurname(); //Get new surname
if(addToPhoneList == false)
createNew();
return;
String checkName = newName; //Creates copies to be used in the checkIfDuplicate method
String checkSurname = newSurname;
addToPhoneList = checkIfDuplicate(checkName, checkSurname); //Check if the entries are duplicate
if(addToPhoneList == false)
createNew();
return;
getNewContactsHomeNum(); // Get new home number
if(addToPhoneList == false)
createNew();
return;
getNewContactsWorkNum(); // Get new work number
if(addToPhoneList == false)
createNew();
return;
getNewContactsCellNum(); // Get new cell number
if(addToPhoneList == false)
createNew();
return;
checkAtLeastOneNumEntered(); // Check that at least one phone number was entered
if(addToPhoneList == true)
updateListWithNew();
}// End of createNew()
// Method to search for an existing contact
public void searchExisting()
{// Start of searchExisting()
addToSearchList = true; // Set the boolean true
searchList.clear(); // Clear list from any previous searches
if(phoneList.size() > 0) // Check if any contacts are in the list
getExistingDetailsAndSearch(); // If there are entries then continue to search
else
JOptionPane.showMessageDialog(null,"There are no contacts to search for. Please use this option when you have added a contact to the list.","Error",JOptionPane.ERROR_MESSAGE);
}// End of searchExisting()
// Method to modify an existing contact
public void modifyExisting()
{// Start of modifyExisting()
modifyContact = true; // Set the boolean to true
if(phoneList.size() <= 0) // Check if the phonelist is not empty
JOptionPane.showMessageDialog(null,"There are no contacts to modify. Please use this option when there have been contacts added to the list.","Error",JOptionPane.ERROR_MESSAGE);
else
getExistingDetailsAndModify(); // If phonelist not emty continue to modify method
}// End of modifyExisting()
//Method to delete a contact from the list
public void deleteExisting()
//Method to get new contacts name
public void getNewContactsName()
newName = JOptionPane.showInputDialog("Please enter the new contacts name or press cancel to exit without saving.");
if(newName == null)
finish();
if(newName.trim().length()<=0)
JOptionPane.showMessageDialog(null,"You have not entered a name. Please try again.","Error",JOptionPane.ERROR_MESSAGE);
addToPhoneList = false;
return;
addToPhoneList = checkLengthValid(newName, "name");
//Method to get a new contacts surname
public void getNewContactsSurname()
newSurname = JOptionPane.showInputDialog("Please enter the new contacts surnname or press cancel to exit without saving.");
if(newSurname == null)
finish();
addToPhoneList = checkLengthValid(newSurname, "surname");
//Method to get a new contacts home number
public void getNewContactsHomeNum()
newHome = JOptionPane.showInputDialog("Please enter the new contacts home number or press cancel to exit without saving.");
if(newHome == null)
finish();
if(newHome.trim().length() > 0)
try
Long homeNum = Long.parseLong(newHome);
catch(Exception e)
JOptionPane.showMessageDialog(null,"You may only use numbers for a valid phone number. Please try again.","Error",JOptionPane.ERROR_MESSAGE);
addToPhoneList = false;
return;
addToPhoneList = checkLengthValid(newHome, "home number");
//Method to get a new contacst work number
public void getNewContactsWorkNum()
newWork = JOptionPane.showInputDialog("Please enter the new contacts work number or press cancel to exit without saving");
if(newWork == null)
finish();
if(newWork.trim().length()> 0)
try
Long workNum = Long.parseLong(newWork);
catch(Exception e)
JOptionPane.showMessageDialog(null,"You may only use numbers for a valid number. Please try again.","Error",JOptionPane.ERROR_MESSAGE);
addToPhoneList = false;
return;
addToPhoneList = checkLengthValid(newWork, "work number");
//Method to get a new contacts cell number
public void getNewContactsCellNum()
newCell = JOptionPane.showInputDialog("Please enter the new contacts cell number or press cancel to exit without saving");
if(newCell == null)
finish();
if(newCell.trim().length() > 0)
try
Long cellNum = Long.parseLong(newCell);
catch(Exception e)
JOptionPane.showMessageDialog(null,"You may only use numbers for a valid number. Please try again.","Error",JOptionPane.ERROR_MESSAGE);
addToPhoneList = false;
return;
addToPhoneList = checkLengthValid(newCell, "cell number");
//Method to get the details for an existing contact
public void getExistingDetailsAndSearch()
String existingName = getExistingName("search for");
if(existingName == null)
addToSearchList = false;
return;
if(existingName.length()<=0)
JOptionPane.showMessageDialog(null,"You have not entered a name please try again","Error",JOptionPane.ERROR_MESSAGE);
addToSearchList = false;
searchExisting();
String existingSurname = getExistingSurname();
if(existingSurname == null)
return;
if(addToSearchList == true)
searchAndAddIfFound(existingName, existingSurname);
//Method to get existing details and modify contact
public void getExistingDetailsAndModify()
String existingName = getExistingName("modify");
if(existingName == null)
modifyContact = false;
return;
if(existingName.length()<=0)
JOptionPane.showMessageDialog(null,"You have not entered a name please try again","Error",JOptionPane.ERROR_MESSAGE);
modifyContact = false;
modifyExisting();
String existingSurname = getExistingSurname();
if(existingSurname == null)
return;
if(modifyContact == true)
getContactBySearch(existingName.trim().toUpperCase(), existingSurname.trim().toUpperCase());
//Method to get the contact from list and modify details
public void getContactBySearch(String currentName, String currentSurname)
int count = 0;
int numFound = 0;
for(ContactDetails cd: phoneList)
cd = phoneList.get(count);
if((cd.name.equals(currentName))&&(cd.surname.equals(currentSurname)))
numFound ++;
changeDetails(cd);
count ++;
if(numFound <= 0)
JOptionPane.showMessageDialog(null,"No contacts matching the name and surname you entered found. Press the modify button to try again.","Information",JOptionPane.INFORMATION_MESSAGE);
//Method to get existing contacts name
public String getExistingName(String whatWasClicked)
String name = JOptionPane.showInputDialog("Please enter the contacts name that you wish to "+whatWasClicked);
return name;
//Method to get an existing contacts surname
public String getExistingSurname()
String surname = JOptionPane.showInputDialog("Please enter the contacts surname.");
return surname;
//Method to change the details of contact
public void changeDetails(ContactDetails conToChange)
String currentName = conToChange.name;
String currentSurname = conToChange.surname;
String currentHome = conToChange.home;
String currentWork = conToChange.work;
String currentCell = conToChange.cell;
String newNameForContact = getNewModName(currentName);
if(modifyContact == false)
modifyExisting();
return;
String newSurnameForContact = getNewModSurname(currentSurname);
if(modifyContact == false)
modifyExisting();
return;
String newHomeForContact = getNewModHome(currentHome);
if(modifyContact == false)
modifyExisting();
return;
String newWorkForContact = getNewModWork(currentWork);
if(modifyContact == false)
modifyExisting();
return;
String newCellForContact = getNewModCell(currentCell);
if(modifyContact == false)
modifyExisting();
return;
if(modifyContact == true)
conToChange.name = newNameForContact;
//Method to get the modified name
public String getNewModName(String currentName)
String newModifiedName = JOptionPane.showInputDialog("Please enter the new name for contact or press cancel to keep it as is.");
if(newModifiedName == null)
return currentName;
if(newModifiedName.trim().length() <= 0)
JOptionPane.showMessageDialog(null,"You may not replace the existing name with a blank name. Please try again.","Error",JOptionPane.ERROR_MESSAGE);
modifyContact = false;
return currentName;
modifyContact = checkLengthValid(newModifiedName, "modified name");
return newModifiedName;
//Method to get the modified surname
public String getNewModSurname(String currentSurname)
String newModifiedSurname = JOptionPane.showInputDialog("Please enter the new surname for the contact or press cancel to keep it as is.");
if(newModifiedSurname == null)
return currentSurname;
modifyContact = checkLengthValid(newModifiedSurname, "modified surname");
if(modifyContact == false)
JOptionPane.showMessageDialog(null,"Surname not changed.","Information",JOptionPane.INFORMATION_MESSAGE);
return currentSurname;
modifyContact = checkLengthValid(newModifiedSurname, "modified surname");
return newModifiedSurname;
//Method to search and update the list with a succesfull search
private void searchAndAddIfFound(String name, String surname)
int count = 0;
int numFound = 0;
for(ContactDetails cd: phoneList)
cd = phoneList.get(count);
if(cd.name.equals(name.trim().toUpperCase()))
numFound ++;
searchList.add(cd);
count ++;
if(numFound <= 0)
JOptionPane.showMessageDialog(null,"No contacts were found matching the dat you entered.","Information",JOptionPane.INFORMATION_MESSAGE);
else
list.clear();
list.addAll(searchList);
//Method that check all entries are a valid logical length
//Method is based on assumption that a normal name, surname, and phone numbers are not longer than 10 characters long.
//IF This method is changed please change the layout in the GUI as this is also set to fit with the layout that gives a neat //apperance
private boolean checkLengthValid(String detailEntered, String whatWasEntered)
boolean validLength = true;
if(detailEntered.trim().length() >= MAX_LENGTH)
JOptionPane.showMessageDialog(null,"The " +whatWasEntered+" you entered is too long. Please try again and use a "+whatWasEntered+" that is less than "+MAX_LENGTH+" characters long.","Error",JOptionPane.ERROR_MESSAGE);
validLength = false;
return validLength;
private void finish()
System.exit(0);
//Method to update the list with a new entry
private void updateListWithNew()
try
ContactDetails cd = new ContactDetails();
cd.name = newName.trim().toUpperCase();
cd.surname = newSurname.trim().toUpperCase();
cd.home = newHome.trim();
cd.work = newWork.trim();
cd.cell = newCell.trim();
phoneList.add(cd);
JOptionPane.showMessageDialog(null,"Contact succesfully entered. To save this change press exit to save or use the save option in the toolbar menu.","Information",JOptionPane.INFORMATION_MESSAGE);
catch(Exception e)
JOptionPane.showMessageDialog(null,"Failed to add contact to list. If problem persists please contact the software developer.","Error",JOptionPane.ERROR_MESSAGE);
list.clear();
list.addAll(phoneList);
//Method to check for duplicate
public boolean checkIfDuplicate(String nameToCheck, String surnameToCheck)
int count = 0;
boolean valid = true;
for(ContactDetails cd : phoneList)
cd = phoneList.get(count);
if(((nameToCheck.trim().toUpperCase()).equals(cd.name))&&((surnameToCheck.trim().toUpperCase()).equals(cd.surname)))
JOptionPane.showMessageDialog(null,"You may not enter a duplicate contact. Please try again and change the name and surname.","Error",JOptionPane.ERROR_MESSAGE);
valid = false;
break;
count ++;
return valid;
//Method to check that at least one phone number exists for contact
public void checkAtLeastOneNumEntered()
if((newHome.trim().length()<=0)&&(newWork.trim().length()<=0)&&(newCell.trim().length()<=0))
JOptionPane.showMessageDialog(null,"You have not entered any phone number at all. You must enter at least one phone number for a new contact.","Error",JOptionPane.ERROR_MESSAGE);
addToPhoneList = false;
//Method that returns the list to the GUI
public ArrayList<ContactDetails> getList()
return list;
}Should I start over from scratch? Can I get help with links to tutorials on following? How to create a java CRUD application (google not useful) and how to layer in java(google not useful)
This is my pres layer as is is this wrong too?
Filename: ContactsListInterface.java
Date: 16 March 2008
Programmer: Yucca Nel
Purpose: Provides a GUI for entering names and contact numbers into a telephone directory.
Also allows options for searching for a specific name and deleting of data from the record
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.text.*;
import java.io.*;
import java.util.*;
import java.text.*;
public class Phonebook1 extends JFrame implements ActionListener
{ //start of class
// construct fields, buttons, labels,text boxes, ArrayLists etc
JTextPane displayPane = new JTextPane();
JLabel listOfContacts = new JLabel("List Of Contacts"); // creates a label for the scrollpane
JButton createButton = new JButton("Create");
JButton searchButton = new JButton("Search");
JButton modifyButton = new JButton("Modify");
JButton deleteButton = new JButton("Delete");
Contact c = new Contact();
ArrayList<ContactDetails> contactList = c.getList();
// create an instance of the ContactsListInterface
public Phonebook1()
{ // start of cli()
super("Phonebook Interface");
} // end of cli()
public JMenuBar createMenuBar()
{ // start of the createMenuBar()
// construct and populate a menu bar
JMenuBar mnuBar = new JMenuBar(); // creates a menu bar
setJMenuBar(mnuBar);
JMenu mnuFile = new JMenu("File",true); // creates a file menu in the menu bar which is visible
mnuFile.setMnemonic(KeyEvent.VK_F);
mnuFile.setDisplayedMnemonicIndex(0);
mnuFile.setToolTipText("File Options");
mnuBar.add(mnuFile);
JMenuItem mnuFileExit = new JMenuItem("Save And Exit"); // creates an exit option in the file menu
mnuFileExit.setMnemonic(KeyEvent.VK_X);
mnuFileExit.setDisplayedMnemonicIndex(1);
mnuFileExit.setToolTipText("Close Application");
mnuFile.add(mnuFileExit);
mnuFileExit.setActionCommand("Exit");
mnuFileExit.addActionListener(this);
JMenu mnuEdit = new JMenu("Edit",true); // creates a menu for editing options
mnuEdit.setMnemonic(KeyEvent.VK_E);
mnuEdit.setDisplayedMnemonicIndex(0);
mnuEdit.setToolTipText("Edit Options");
mnuBar.add(mnuEdit);
JMenu mnuEditSort = new JMenu("Sort",true); // creates an option for sorting entries
mnuEditSort.setMnemonic(KeyEvent.VK_S);
mnuEditSort.setDisplayedMnemonicIndex(0);
mnuEdit.add(mnuEditSort);
JMenuItem mnuEditSortByName = new JMenuItem("Sort By Name"); // to sort entries by name
mnuEditSortByName.setMnemonic(KeyEvent.VK_N);
mnuEditSortByName.setDisplayedMnemonicIndex(8);
mnuEditSortByName.setToolTipText("Sort entries by first name");
mnuEditSortByName.setActionCommand("Name");
mnuEditSortByName.addActionListener(this);
mnuEditSort.add(mnuEditSortByName);
JMenuItem mnuEditSortBySurname = new JMenuItem("Sort By Surname"); // to sort entries by surname
mnuEditSortBySurname.setMnemonic(KeyEvent.VK_R);
mnuEditSortBySurname.setDisplayedMnemonicIndex(10);
mnuEditSortBySurname.setToolTipText("Sort entries by surname");
mnuEditSortBySurname.setActionCommand("Surname");
mnuEditSortBySurname.addActionListener(this);
mnuEditSort.add(mnuEditSortBySurname);
JMenu mnuHelp = new JMenu("Help",true); // creates a menu for help options
mnuHelp.setMnemonic(KeyEvent.VK_H);
mnuHelp.setDisplayedMnemonicIndex(0);
mnuHelp.setToolTipText("Help options");
mnuBar.add(mnuHelp);
JMenuItem mnuHelpHelp = new JMenuItem("Help"); // creates a help option for help topic
mnuHelpHelp.setMnemonic(KeyEvent.VK_P);
mnuHelpHelp.setDisplayedMnemonicIndex(3);
mnuHelpHelp.setToolTipText("Help Topic");
mnuHelpHelp.setActionCommand("Help");
mnuHelpHelp.addActionListener(this);
mnuHelp.add(mnuHelpHelp);
JMenuItem mnuHelpAbout = new JMenuItem("About"); // creates a about option for info about api
mnuHelpAbout.setMnemonic(KeyEvent.VK_T);
mnuHelpAbout.setDisplayedMnemonicIndex(4);
mnuHelpAbout.setToolTipText("About this program");
mnuHelpAbout.setActionCommand("About");
mnuHelpAbout.addActionListener(this);
mnuHelp.add(mnuHelpAbout);
return mnuBar;
} // end of the createMenuBar()
// create the content pane
public Container createContentPane()
{ // start of createContentPane()
//construct and populate panels and content pane
JPanel labelPanel = new JPanel(); // panel is only used to put the label for the textpane in
labelPanel.setLayout(new FlowLayout());
labelPanel.add(listOfContacts);
JPanel displayPanel = new JPanel();// panel is used to display all the contacts and thier numbers
setTabsAndStyles(displayPane);
displayPane = addTextToTextPane();
displayPane.setEditable(false);
JScrollPane scrollPane = new JScrollPane(displayPane);
scrollPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS); // pane is scrollable vertically
scrollPane.setWheelScrollingEnabled(true);// pane is scrollable by use of the mouse wheel
scrollPane.setPreferredSize(new Dimension(400,320));
displayPanel.add(scrollPane);
JPanel workPanel = new JPanel();// panel is used to enter, edit and delete data
workPanel.setLayout(new FlowLayout());
workPanel.add(createButton);
createButton.setToolTipText("Create a new entry");
createButton.addActionListener(this);
workPanel.add(searchButton);
searchButton.setToolTipText("Search for an entry by name number or surname");
searchButton.addActionListener(this);
workPanel.add(modifyButton);
modifyButton.setToolTipText("Modify an existing entry");
modifyButton.addActionListener(this);
workPanel.add(deleteButton);
deleteButton.setToolTipText("Delete an existing entry");
deleteButton.addActionListener(this);
labelPanel.setBackground(Color.red);
displayPanel.setBackground(Color.red);
workPanel.setBackground(Color.red);
// create container and set attributes
Container c = getContentPane();
c.setLayout(new BorderLayout(30,30));
c.add(labelPanel,BorderLayout.NORTH);
c.add(displayPanel,BorderLayout.CENTER);
c.add(workPanel,BorderLayout.SOUTH);
c.setBackground(Color.red);
// add a listener for the window closing and save
addWindowListener(
new WindowAdapter()
public void windowClosing(WindowEvent e)
int answer = JOptionPane.showConfirmDialog(null,"Are you sure you would like to save all changes and exit?","File submission",JOptionPane.YES_NO_OPTION);
if(answer == JOptionPane.YES_OPTION)
System.exit(0);
return c;
} // end of createContentPane()
protected void setTabsAndStyles(JTextPane displayPane)
{ // Start of setTabsAndStyles()
// set Font style
Style fontStyle = StyleContext.getDefaultStyleContext().getStyle(StyleContext.DEFAULT_STYLE);
Style regular = displayPane.addStyle("regular", fontStyle);
StyleConstants.setFontFamily(fontStyle, "SansSerif");
Style s = displayPane.addStyle("bold", regular);
StyleConstants.setBold(s,true);
} // End of setTabsAndStyles()
public JTextPane addTextToTextPane()
{ // start of addTextToTextPane()
int numberOfEntries = contactList.size();
int count = 0;
Document doc = displayPane.getDocument();
try
{ // start of tryblock
// clear previous text
doc.remove(0,doc.getLength());
// insert titles of columns
doc.insertString(0,"NAME\tSURNAME\tHOME NO\tWORK NO\tCELL NO\n",displayPane.getStyle("bold"));
for(ContactDetails cd : contactList)
cd = contactList.get(count);
doc.insertString(doc.getLength(),cd.name+"\t"+cd.surname+"\t"+cd.home+"\t"+cd.work+"\t"+cd.cell+"\n",displayPane.getStyle("regular"));
count ++;
} // end of try block
catch(BadLocationException ble)
{ // start of ble exception handler
System.err.println("Could not insert text.");
} // end of ble exception handler
return displayPane;
} // end of addTextToTextPane()
// code to process user clicks
public void actionPerformed(ActionEvent e)
{ // start of actionPerformed()
String arg = e.getActionCommand();
// user clicks create button
if(arg.equals("Create"))
c.createNew(); // method to create a new Contact
addTextToTextPane();
if(arg.equals("Search"))
c.searchExisting(); // method to search for an existing entry
addTextToTextPane();
if(arg.equals("Modify"))
c.modifyExisting(); // method to modify contact
addTextToTextPane();
if(arg.equals("Delete"))
c.deleteExisting();
addTextToTextPane();
if(arg.equals("Exit"))
} // end of actionPerformed()
// method to create a new contact
public static void main(String[] args)
{ // start of main()
// Set look and feel of interface
try
{ // start of try block
UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
} // end of try block
catch(Exception e)
{ // start of catch block
JOptionPane.showMessageDialog(null,"There was an error in setting the look and feel of this application","Error",JOptionPane.INFORMATION_MESSAGE);
} // end of catch block
Phonebook1 pb = new Phonebook1();
pb.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
pb.setJMenuBar(pb.createMenuBar());
pb.setContentPane(pb.createContentPane());
pb.setSize(520,500);
pb.setVisible(true);
pb.setResizable(false);
} // end of main()
} //end of class -
NEED HELP UPDATING
MY PHONE WONT TURN ON ONLY WHILE IT ON CHARGE
BUT I NEED IOS 6 UPDATEHello, chloea_2012.
Thank you for using Apple Support Communities.
Here are a couple articles that will help troubleshoot this issue.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If you receive any error messages while updating your iOS device, this article provides some helpful troubleshooting steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Regards,
Jason H. -
My Snow Leopard 10.6.3 has Safari 4.0.4 but this cannot be used for the new features of iTunes. I tried upgrading to Safari 5.1.7 but it needs Snow Leopard 10.6.8. Where can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?
Hi..
here can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?
Not possible. You need to update to v10.6.8
Click your Apple menu > Software Update
Or update using the this download > Mac OS X 10.6.8 Update Combo
Then restart your Mac. -
I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV in my IPad wherever by using wireless and App Remote??
If you have an iPad 2 you can wirelessly mirror it to your TV via the ATV device. If you have an iPad 1 then you can use airplay but not all apps are enabled to push video, as the developer needs to do this.
You can also view all local content from iTunes or your iPad, pushed via airplay/home-sharing.
The other services available are iTunes movie rentals, TV shows (past purchases viewable from the cloud), Photo Stream, Netflix, Vimeo, Podcasts, Youtube, Sports etc.
More info
http://www.apple.com/appletv/ -
I have one modem in the house but I need 2 different networks.
I have one modem in the house but I need 2 different networks that will not communicate or even see each other. The first network is the one that needs to be the most secure. The computers are used for personal information, documents, pictures, Apple TV and iTunes home sharing.(3 Apples, 3 iPads, 3 iPhones and 4 Apple TVs) The second network needs to be for the 3 computers and gaming systems used for social games on Facebook, PSP, XBox, and a gaming system used for World of Warcraft. The social interactions seem to be the ones that have picked up most of our computer network issues and I would like to be able to isolate them from any communication with our home network (2 PCs and 1 Mac). Is there a way that I can use 2 different routers along with blocking any bluetooth and/or bonjour connections? I am not worried about a networked printer for the second network, it is more to try and contain any issues that may slip though virus protection and create a mess with our home systems. It would be nice to still be able to set up a Guest Network for the herds of kids and adults to use when visiting as well. PLEASE tell me this can be done.
Thank You
ChristineChristine,
Apple may be able to do some, but not all of what you want to do.
The dual band AirPort Extreme can create a main, or "private" network and a separate "guest" network. The private network can be configured to handle both wired and wireless clients. The "guest" network works only for wireless clients.
Computers, devices, etc on the "guest" network cannot "see" or communicate with any of the devices on the main or "private" network. But, it is possible to allow clients on the "guest" network to see other devices on the "guest" network, so a wireless printer on this network would allow anyone on the "guest" network to be able to use the printer if you need that functionality.
You can "extend" the "main" network using more wireless devices if you need more wireless coverage. The "guest" network cannot be extended.
Depending on the level of service you have with your ISP, you may have bandwidth issues with two networks and multiple devices all trying to use the Internet connection. I would think that a 25-30 Mbps connection would be the bare minimum to handle what you want to do and 50 Mbps would be advised.
If you want to use two separate routers, you are really looking at a commercial type installation best handled by commercial products like Cisco, so that might be the place to look. -
I have a new ipad mini that I need to activate but I need to get the data from my old ipad 1 and install on the new mini. I have a itunes acct and also icloud acct. How do I back up the ipad 1 data and then activate the mini. I assume I will need to transfer the sim from the ipad 1 to the mini.
Thanks for any info
wino454How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
Cheers, Tom
Maybe you are looking for
-
N8 music player update 17.0.17
All music files are now corrupt after this update!!! Any ideas other than reseting the whole phone?
-
Count Index Internal Table or Select Statement
Hi All, I wish to index and display my internal table. How do i do this? for example in my Internal Table I have the following data:- Material-----Plant--Index ABCD1-- 1000-- 1 ABCD1-- 1000-- 2 ABCD1-- 1000-- 3 ABCD2-- 1000-- 1 ABCD2-- 1000-- 2
-
Left channel audio malfunction
My left audio channel in my headphone jack cut out yesterday, I'm plugged into speakers and I get nothing but a high pitched whine out of the left channel. It seems to make different noises based on what the computer's doing internally too (drive spi
-
Terminal Server performance issue
Hi, We have Acrobat Pro 11.0.07 on a Terminal Serveur ( windows server 2008 R2 standard) and got performance issue when we use acrobat. Acrobat use a complete core and this is slowing our server. Is there an other version of Acrobat to use or patch t
-
Suddenly NoSuchMethodError on calling DOCUMENT_CREATE2 with JCo
Hi. I'm working with JCo to create ("BAPI_DOCUMENT_CREATE2") and modify ("BAPI_DOCUMENT_CHANGE2", "BAPI_DOCUMENT_DELETE") documents in SAP R/3. Until yesterday all worked fine. Suddenly I get a "NoSuchMethodError" if I call this methods. Is it possib