Im the photographer... the display color change when i upgrade to SL..

I m a photographer, after i upgraded to SL, all my black and white photo are yellowish. The black are not total black and the white are not total white like in os x 10.5.x. Are any others photographer upgrade their os and face this problem too?

Check that the correct profile is selected for your display (in Sys. Prefs. -> Display -> Color)
After installing SL mine was not set to the correct profile. I fixed it, and it has remained set to the correct one since.
Steve

Similar Messages

  • Display color changes when I start some applications.

    Hello.
    Today I reinstalled OSX 10.8.1.
    All applications are up2date.
    But some applications like iPhoto have a strange behavior. When I start them, the display color changes. It looks like it has a blue fog.
    As soon as I close the application it's back to normal. Only happens for a few applications.
    In the console I see the following entires when I start the application and the display changes:
    11.09.12 23:06:22,777 WindowServer[86]: Received display connect changed for display 0x42728c0
    11.09.12 23:06:22,806 WindowServer[86]: Received display connect changed for display 0x3f003d
    11.09.12 23:06:22,806 WindowServer[86]: Received display connect changed for display 0x3f003e
    11.09.12 23:06:22,808 WindowServer[86]: CGXMuxAcknowledge: Posting glitchless acknowledge
    11.09.12 23:06:22,809 SystemUIServer[7841]: DisplayReconfigurationCallback
    11.09.12 23:06:22,809 SystemUIServer[7841]: DisplayReconfigurationCallback
    11.09.12 23:06:22,809 SystemUIServer[7841]: DisplayReconfigurationCallback
    11.09.12 23:06:22,810 SystemUIServer[7841]: DisplayReconfigurationCallback
    11.09.12 23:06:22,813 WindowServer[86]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042728c0 device: 0x10eb0f320  isBackBuffered: 1 numComp: 3 numDisp: 3
    11.09.12 23:06:22,847 WindowServer[86]: Received display connect changed for display 0x42728c0
    When I close the app I see:
    11.09.12 23:06:48,405 WindowServer[86]: CGXSetWindowListAlpha: Invalid window 0
    11.09.12 23:06:49,406 Dock[4503]: CGSReleaseWindowList: called with 7 invalid window(s)
    11.09.12 23:06:49,885 com.apple.ShareKitHelper[569]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
    11.09.12 23:06:49,885 com.apple.ShareKitHelper[569]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
    11.09.12 23:06:49,885 com.apple.ShareKitHelper[569]: --warning: [ShareKit] Cancel UI for running services with Client PID: 8433
    11.09.12 23:06:49,915 WindowServer[86]: Received display connect changed for display 0x42728c0
    11.09.12 23:06:49,960 WindowServer[86]: CGXMuxAcknowledge: Posting glitchless acknowledge
    11.09.12 23:06:49,961 SystemUIServer[7841]: DisplayReconfigurationCallback
    11.09.12 23:06:49,962 SystemUIServer[7841]: DisplayReconfigurationCallback
    11.09.12 23:06:49,962 SystemUIServer[7841]: DisplayReconfigurationCallback
    11.09.12 23:06:49,962 SystemUIServer[7841]: DisplayReconfigurationCallback
    11.09.12 23:06:49,973 WindowServer[86]: Received display connect changed for display 0x42728c0
    11.09.12 23:06:49,974 WindowServer[86]: Received display connect changed for display 0x3f003d
    11.09.12 23:06:49,974 WindowServer[86]: Received display connect changed for display 0x3f003e
    Any idea what the problem might be?
    Thanks
    Dan

    I had the same problem early on in Mountain Lion - whenever an application kicked in that used the discrete GPU, the screen would get a bluish tint. I 'resolved' the situation by using Cody Krieger's gfxCardStatus and kept the mode on Integrated Only. This, of course, slowed down some applications but, by and large, I was able to live with it. Then one day - just out of the 'blue' - I decided to switch back to Dynamic Switching: and, lo and behold, by blue tint was gone when the discrete GPU kicked in.
    I only know how to temporarily fix the problem - you're one of about a dozen people that have reported it both here and in the Adobe Photoshop users forum. Try the gfxCardStatus 'fix' and then see if the problem doesn't rectify itself after a bit. It wasn't the 10.8.1 update that fixed my problem - it was just a week or so of running on integrated only.
    Let me know if this doesn't work for you...
    Clinton

  • Display color changes when Photoshop opens

    Hi there,
    Since recently, whenever I open Photoshop CS6 (13.0.1) or Illustrator CS6 (16.1.0), the display color changes, i.e. as if the display color profile termporarily changes to a different one. Even if I switch to another app, the color change will remain until I quite Photoshop or Illustrator. Using Mac OS 10.8.2.
    Does anyone anyone have an idea how to prevent this from happening?
    Thanks!

    The color shift happens when the computer changes the graphics card (from Intel HD to Nvidia or AMD). It's a problem of Mac OS X 10.8.x. I found a simple solution that worked (at least for me):
    Turn off automatic graphics switching in System Preferences > Energy Saver
    Reboot your computer
    Turn automatic graphics switching on again (or leave it off, as you like ...)
    It seems that the mac has to start up with the discreet graphics card turned on (Nvidia or AMD).

  • Rules applied to multiple cells trigger color changes when any of the cells

    "Rules applied to multiple cells trigger color changes when any of the cells meet the rule’s condition." That's what Help says, but when I follow the directions, it doesn't work. This is in Numbers 08.
    I have a table where the contents of one column are either "YES" or "NO", depending on formulas using variables from other cells. If YES, I want the fill of that cell and that of two adjacent cells to change from white to green. I select all three cells and use conditional format rules for "text contains:" YES, then choose my fill color. When I return to the table and introduce values for the variables that trigger the rule, only the cell in the YES/NO column changes to green; the other two remain white.
    While I am spreadsheet challenged, I usually can follow directions as plain as those in Help, but it's not working. I couldn't find anything in the discussions after an hour of searching. Is this a known problem or am I just stupid?

    For what it's worth, that's the way I read that line in the User Guide as well. What it actually appears to mean, though is 'Rules applied to multiple cells apply independently to each of the cells."
    Here's a workaround for your three adjacent columns. Long, but fairly simple steps.
    Add a second table to the sheet (Table 2).
    Resize the second table to one column wide and as many rows as you want to apply the conditional format to.
    Set the width of the column to the same width as the three columns you want to highlight, and the row height(s) to match the rows.
    Format to table to have NO Header or Footer row or column.
    Use the Wrap Inspector to uncheck "Object causes wrap"
    In the first top cell of Table 2, enter an = sign, then Click on Table 1 in the sidebar, Click on the first cell that will hold YES or NO.
    Fill the formula down the rest of Table 2.
    With all cells in Table 2 selected, use the Cell Format inspector to set the 'text contains yes' rule and the conditional fill colour for these cells.
    Test the conditional formating by introducing values into Table 1.
    Click on Table 1 in the sidebar, then use the Table inspector to set Cell Fill to 'none'.
    Click on Table 2 in the sidebar, then drag that table onto table 1 aligning it to cover the cells in which the conditional formating is to appear.
    When positioned (and still selected), go to the Arrange menu and Send Backward to move Table 2 behind the (transparent) cells in Table 1.
    With Table 2 still selected, click on the Cell Borders color well and set the Opacity of the borders to 0%.
    Click the Text inspector and set the Text colour Opacity for Table 2 to 0%.
    Regards,
    Barry

  • Why do the colors change when I reopen a document?

    Why do the colors change when I reopen a document?

    Are you opening the same Pages document or do you open another document like Word? I has recently been a similar discussion in this forum.

  • I upgraded to Mavericks and now I get a LOT of the spinning colored disk when loading a program or almost anything.

    I upgraded to Mavericks and now I get a LOT of the spinning colored disk when loading a program or almost anything?

    For memory check out OWC http://eshop.macsales.com/, Crucial: http://www.crucial.com/ and Kingston http://www.kingston.com/us/.  You will need to know your Mac the year and season your Mac was first sold and model number which can be found here:
     > About This Mac > More Info… > System Report > Model Identifier:

  • I want the title on the browser to change when one of the frames changes in the Frameset.

    I am using frames (please don't tell me off!) and PHP.
    I want the title on the browser to change when one of the
    frames changes in the Frameset.
    Normally the title of the browser comes from the Frameset,
    But I am sure I have seen websites where the title changes
    depending on one of the frames... how is this done?
    C

    Then don't use frames.
    > Normally the title of the browser comes from the
    Frameset, But I am sure I
    > have seen websites where the title changes depending on
    one of the
    > frames...
    > how is this done?
    Show us one and we'll tell you.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "colinwalton" <[email protected]> wrote in
    message
    news:epuu1t$kgv$[email protected]..
    >I am using frames (please don't tell me off!) and PHP.
    >
    > I want the title on the browser to change when one of
    the frames changes
    > in
    > the Frameset.
    >
    > Normally the title of the browser comes from the
    Frameset, But I am sure I
    > have seen websites where the title changes depending on
    one of the
    > frames...
    > how is this done?
    >
    > C
    >

  • Can the resolution be changed when taking a photo.  When I take a photo it is always 1MEG or more.  Like to reduce this so that the photos are easily e-mailed.  Any help?

    Can the resolution be changed when taking a photo.  When I take a photo it is always 1MEG or more.  Like to reduce this so that the photos are easily e-mailed.  Any help?

    When you email a picture from Photos, you can choose the size.
    http://i1224.photobucket.com/albums/ee374/Diavonex/3bec08e4423ac97de93d4560186b6 daf.jpg

  • Losing Displays Color setting when waking from sleep

    Hey y'all!
    I haven't seen this specific problem addressed anywhere in the forums - I have a Pismo 500 running 10.3.9. The problem is that when I wake the Pismo from sleep, nine times out of ten, it defaults to the uncalibrated display space. If I open the Prefs pane, the Displays>Color tab shows the correct calibrated profile selected, but the colors and such are way off. If I just click on the selected profile, it goes back to that profile correctly - but that's too many mouse clicks just to see correctly after waking!
    The confusing thing is that this problem never shows up during starts/restarts - during the boot process, the Pismo correctly applies the selected profile and the change is noticable (my display is natively WAAAAY too blue/cyan for my tastes and line of work). So it works from a standing start, and from a warm reboot, just not waking from sleep.
    The problem didn't manifest until after I moved from 10.2.x to 10.3, but that move solved so many other problems, I'm still happy I did it.
    Any thoughts?

    Hi,
    I do have a work around this problem.
    Go to mac hd, to users, to what looks like a house, to library, to colorsync, to profiles. Open profiles and take that profile and put it on the desktop.
    Next go to mac hd, to library, to colorsync, to profiles, to displays.
    Open displays and place the profile on the desktop in the there.
    That solved my problem.
    emac   Mac OS X (10.3.9)   Combodrive, SN G84162YCQJB

  • Display resolution changes when I close Notebook

    Hello,
    I have a very annoying problem since I reinstalled the complete system of my Z60m (including all updates within the thinkpad system update utility).
    I configured 'Close Notebook Behaviour' in the energy manager to do NOTHING (neither hibernate nor standby) if I close my notebook cover. When I close it the display driver seems to interprete the closing as a removal of the display device and when I re-open the cover the ati display card starts with a resolution of 600x400, detects the native resolution of the panel (1600x1024) and changes it immediately.The problem is, that all open programs including the desktop are going through this resolution change too and everything gets completely cluttered.
    I already tried to remove all drivers and reinstall without Catalyst center (I installed only the drivers), but it didn't help to fix the problem. I also tried to inactivate PowerPlay and automatic device detection. This didn't help neither.
    The point is, that before I re-installed my system everything was fine when I re-opened the cover of my notebook, with the same configuration within the energy manager.
    My system details:
    Thinkpad Z60m (2531-E9G)
    Windows XP (SP3)
    ATI Radeon X600
    ATI Driver incl. Catalyst Control Center (Driver-package version: 8.383.1.1.3-070621a2-051036C)
    Any hint or advice regarding this issue is appreciated!
    Thanks in advance.
    Kind regards
    Henry Farkas

    Hi R - J - C
    Are you using external monitor or have an apple video adapter plugged in into your mini dvi port, if that so, try to unplug that first.
    Also once you set it back to its native resolution, try not to go back there by check the "Show displays in menu bar" and you can change the resolution from there.
    May I ask why you need to go to system preference > display that often?
    Try to repair permission and reset PRAM to refresh it.
    Good Luck.

  • Why are my colors changing when copy and paste a graphic from docA to docB both in illustrator?

    Both documents in Illustrator CC are RGB and I'm trying to copy a logo onto a template, but the color of the logo completely changes when I copy and paste it into the template. The logo has three different pinks and they turn red when pasted. There is no graphic styling and the logo is all gradient.

    What is weird is that we get a lot of logos from the same company and we put it on shirt templates so they can see size wise on how it would look on shirts. It's happened with other logos, but very slightly. I asked my co-worker who sends me the logos what version she uses and she also uses CC but does not know what version the other company uses. To them, it doesn't matter if the logo colors get altered, they have the PMS colors to work off of for screen printing. I just want to make sure that if another company sends us logos with PMS colors, we will know how to fix it.

  • Cell/Background color changes when copying to other Excel 2010 document

    When you copy and paste report cells (e.g. CO report outputted in Office integration, MS Excel) to a new Excel file, the background color changed dramatically (to bright red).
    SAP Theme:  SAP Signature Theme
    Excel 2010
    We tried paste option > match destination formatting but does not help.
    Anyone has similiar problems?  Appreciate any help.

    dear friend,
    you would do:
    1. search SAP Notes;
    2. check out the updates/patches for your MS Office;
    3. replicate it on another computer/another sap user (make sure it is a local issue)
    good luck!

  • 10.9.3 update display color change

    Hello all,
    Is it only me or have more people noticed a change in the display color (or color profile) since the latest 10.9.3 update?
    I updated a moment ago while working on some graphic designs. After restart I could clearly see the change as I used a very light (237 235 221) background color and it looks certainly different now. I checked the color profiles and I still use the Adobe RGB (1998) as I did before the update.
    Light conditions in the room are the same, my eyes are stil the same, no huge amounts of coffee since the upgrade either.
    I can live with this but would like to know if something begins to happen with my computer or wether it is a more common problem, then I can rest asure a fix will arrive soon ;-)
    All the best!
    Jeroen

    Try resetting PRAM.
    Reset PRAM.  http://support.apple.com/kb/PH4405

  • Color change when opening in Reader

    Hi, I created a PDF in Photoshop. I then added an editable field in Acrobat, using the same RGBs. When I open the file in Reader, the color of the editable field does not match. Any suggestions on what I can do to resolve this?  I have the most recent version of Acrobat and Reader.
    Thanks,
    Jackie

    Here is a screen shot of the reader PDF, followed by the original file in Acrobat. You can see that the entire document color changed when I opened it in Reader.
    THanks,
    Jackie

  • Display colors change after start up

    Hi, I recently tried to open a Power Point file which was too heavy and I got so desperate that I hit the keyboards as if they were a piano... Final result is that now everytime I start up the computer the display colors are all a mess, like if the "negative" part of the picture shows up instead of the true colors. I know the display is ok, for when the computer is started, the initial screen colors show up well.
    I would not like having to reload the operating system to fix the problem.
    Any suggestions?

    Open the Universal Access pane of System Preferences, click on the Seeing tab, turn off the White on Black option, move the Contrast slider all the way to the left, and deactivate the remaining options except for the one which controls access to assistive devices.
    (23938)

Maybe you are looking for