Im trying to install itunes 7.1 and keep getting the error "2330"

yeah i keep getting this error called 2330 and then it wont install all the way. Id appreciate any help!
thanks

yeah i keep getting this error called 2330 and then it wont install all the way.
what's the name of the file that your 2330 message is citing, inukage? (that can make a difference with troubleshooting a 2330.)

Similar Messages

  • I am trying to download itunes 10.6 and keep getting this error message, "The feature you are trying to use is on a network resource that is unavailable to a folder containing installation package itunes64.msi".  What do I need to do?

    I am trying to download itunes 10.6 and keep getting the error message "The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes67.msi".  Where do I find this or how do I get it?

    "The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.

  • I'm trying to install on windows 7 and am getting the error message 'mobile device failed to start

    I'm trying to install iTunes on my computer and I'm getting an error message 'apple mobile device'  failed to start. Verify that you have sufficient privileges to start system service

    Hey Syracuse8769!
    Here is an article that can help you troubleshoot this issue and will instruct you about restarting the Apple Mobile Device Service:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • I'm trying to install iTunes 10.5 and I get an error message.

    The error says, "There is a problem with this Windows Installer package. A program required for this install to comeplete could not be run. Contact your support personnel or package vendor."

    I had the same problem too, had to completely remove anything apple related. You can find the instructions here: http://support.apple.com/kb/HT1923
    Uninstalling all the components didn't work first time for me, so if you have the same problem, move onto another and go back to it in a few minutes. I also had to go into programme files and delete the apple related files after install.
    Mines okay now, hopefully this works for you too! My iTunes library returned to how it was before the install also, very handy!

  • I'm trying to install Acrobat XI Standard and keep getting  "data error: cyclic redundancy check".

    I've already tried restarting computer and there are no other programs open while I am trying to install. I'm using Windows Vista Home Basic.

    if you're using a dvd to install, copy its contents to a desktop directory.
    otherwise, redownload the installation files.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • I am trying to install itunes 10.5 but I get an error message that says click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi...I try to point iTunes to the .msi file but that is not working.

    i am trying to install itunes 10.5 but I get an error message that says "click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi..." I try to point iTunes to the .msi file on my c drive but then it gives me  a message says "the file location is not a valid installation packaage for the product iTuness.  Try to find the installation package 'itunes.msi' in a folder from which you can install iTunes".  Any help, insight, guidance would be greatly appreciated!!

    "The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I am trying to reinstall itunes 10.5 and am getting the following error message. An error occurred during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50727.6195".publicKey Token="1fc8b3b9a1e18e3b"Anyone know how to fix this?

    i am trying to reinstall itunes 10.5 and am getting the following error message.
    An error occurred during the installation of assembly “Microsoft.VC80.CRT.type=”win32”.version=”8.0.50727.6195”.publicKeyToken=”1fc8b 3b9a1e18e3b”.processorArchitecture=”x86””. Please refer to Help and Support for more information. HRESULT:0X800736B3.
    Anyone know how to fix this?

    same problem. tried the ff fixes from microsoft but no joy
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
    http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
    http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
    other ideas would be appreciated.
    cheers

  • Im trying to upgrade iTunes to v 10.6 on a windows vista pc and keep getting the error, "Invalid Drive /E".  What do I do to get past this?

    I'm trying to upgrade to iTunes v 10.6 on a windows vista pc and keep getting the error, "Invalid Drive/E".  What do I do to get past this?

    Open a Windows Command prompt, e.g. Hit Start > Run, type in CMD and press OK.
    Type in SUBST E: C:\<enter>
    This will map E: to C: until the machine is restarted or you enter SUBST E: /D at the command prompt. Now you can try uninstalling or upgrading the software again.
    (If upgrading software which lets you choose a location, install the software in the default location, not on the E:\ drive.)
    See here for more info.
    tt2

  • I am trying to download itunes 10.7 and keep getting "error writing to file C\config.msi\6f8a6.rbf.  Can anyone help?

    I am trying to download itunes 10.7 and keep getting "error writing to file C\config.msi\6f8a6.rbf"  Can anyone help?

    Are you running Kaspersky security software on that PC? (There's been a few reports in recent times of Kaspersky interfering with iTunes installs, with that message being produced.)
    If there is Kaspersky on board, we should try some general-principles getting-past-security-software-interference troubleshooting.
    Download and save a fresh copy of the iTunesSetup.exe (32-bit installer file) or iTunes64Setup.exe to your Hard drive. (Don't run the install on line, and don't start the install just yet.)
    http://www.apple.com/itunes/download/
    Restart the PC. After the PC restarts do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
    Now start the install by doubleclicking the iTunesSetup.exe (or iTunes64Setup.exe) file you downloaded earlier.
    Reenable all security software prior to reconnecting to your network and/or the internet.
    Any better luck with the security software shut down?

  • I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    BUMP
    Yes, I just get that message. I don't see how I could investigate this problem.
    I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
    In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
    Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
    Can anybody help me?

  • I have uninstalled and reinstalled itunes numerous times and keep getting the message it reinstalled incorrectly stating windows Error 127.

    I have uninstalled and reinstalled itunes numerous times and keep getting the message it reinstalled incorrectly stating windows Error 127.  I am using windows 7

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    You may have more success if you use the advice in the Install missing components section to break down the installer into its component .msi files and install these in alphabetical order.
    tt2

  • I installed Adobe 8.0 and keep getting the following message when I try to open it: Warning: you entered an invalid serial number in adobe 8.0. Please re install adobe under a valid serial number.

    I installed Adobe 8.0 and keep getting the following message when I try to open it: Warning: you entered an invalid serial number in adobe 8.0. Please re install adobe under a valid serial number.

    Adobe Acrobat 8.0
    standalone version
    Worked for years.......pc crashed.......fresh install of everything, but Acrobat will install, but I get error message when I try to use.

  • When trying to install itunes on my PC, I get the message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update). Please advise how to proceed.

    Please help with this problem. When trying to install itunes on my HP520 PC, I get the error message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update).

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • When trying to launch iTunes it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." I am unable to enter a uname or password. Please help!!

    When trying to launch iTunes on my PC running Windows 7 it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." Because iTunes is frizen at this point I am unable to enter a username or password, or in fact do anything. Please help!! I have uninstalled and reinstalled iTunes numerous times as well as attempting all of the fixes that I could find on-line and still no joy.

    That sounds extremely phishy to me... iTunes does not require authentication simply to launch it. I suspect you've got something nasty intercepting network traffic. That server may be set up to log the Apple ID that you enter so it can be used fraudulently. Try ComboFix from Bleeping Computer.
    FWIW the domain mellor.co is registered to an accountants in Knutsford, Cheshire, UK, and produces the same authentication request if visited with a browser. There is no sign of a "real" publicly visible website at that domain which is a somewhat odd.
    tt2

Maybe you are looking for

  • Bunch of errors in Windows Server 2008 R2

    Hi everyone, I've searched Technet and all the Internet for a clear solution or any clue that could help me solve this issue, but didn't manage. Recently Windows Server 2008 R2 SP1 started to frequently and spit out bunch of errors that are connected

  • Why does deleted email reload on ipad

    Frequently and irritatingly, my optimum online email reloads itself onto my mobile devices (ipad, iphone) even when i have deleted them and emptied the trasth. Any solutions?

  • Unable to update ios 4.3 software, trying since last 02 days...!!!

    Hi, I have iphone 4, since last couple of days I am trying my best to upgrade software but failed, first i thought that my broadband speed is slow, i checked it, it was around 15 mbps, i phoned to broadband service provider who checked everything and

  • Animation Beginner, is Ae for me?

    Looking for advice, I am a Graphic Designer with no formal training in animation.  I recieved a job I just can't pass up. It is a great opportunity for me to learn animation.  I need to create a cartoon mascot that will be in an environment, that wil

  • How to load a flat file

    Hi, I have created an empty BPEL process which should take a flat file from my input directory and write it on to the database.But how is this process initiated?would the process be initiated by the presence of a flat file.... which is not happening