Im Trying to install my wireless keyboard to my Mac n I can't?
I have a Mac n im Trying to install a wierless keyboard but i cant?
Perhaps this article can be of assistance.
iTunes Store: My credit card's security code or zip code does not match my bank's records
B-rock
Similar Messages
-
After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work
While trying to install my (less than 2 year old) HP6500 Wireless all-in-one software on my 3rd networked computer, the software installation went into a loop and would not complete the installation. After about an hour or so of waiting, I physically had to unplug the printer & eject the CD. Upon doing so, the printer became next to useless. The printer key pad no longer functions except when I first plug it in, and I can no longer access it from the other 2 original computers, even with USB. The HP solution center says it’s on line, until I go to print via USB, then it says it’s offline. I can hook the USB up on the Widows 7 unit and force it to print Word Office documents, but when I try to print documents on it from either Internet Explorer or Fire Fox it wants to send a Fax??? I've uninstalled and reinstalled the software 3 times on my Windows 7 unit now to no avail. Is it my printer, the printer Firmware or what? I have downloaded and run all the HP & Microsoft troubleshooting tools on the Windows 7 unit to no avail. However; HP downloads will not successfully complete on my XP unit. What should I do? Should I start over with a new wireless printer?
Totally ConfuzedRe: After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work
Ref: 02-23-2012 08:53 AM
12:38 AM 2/24/2012 UPDATE ON WHAT I HAVE TRIED AGAIN:
1. Power Reset on the Printer: Power off the printer. Unplug the power cable from the back of the unit. Wait 60 seconds. Replug the power cable to the printer and power it on. DONE
2. Print a test page: Follow this document to print the test page. PRINTER SCREEN SAYS IT'S PRINTING AND THE POWER LIGHT IS FLASHING LIKE IT'S BUSY, BUT NOTHING IS HAPPENING. ONLY WAY TO USE IT NOW IS TO UNPLUG IT AND START OVER. THIS HAPPENS ALL THE TIME NOW. IT WILL NOT PRINT TEST REPORTS.
3. Create a copy of the printed test page. CANNOT DO NOW - (PRINTER FREEZES UP WITH A BLINKING POWER LIGHT)
4. Print the Wireless Network Test Report (To check if there are any errors) CANNOT DO
Press the Setup button ( ). DOESN'T WORK EXCEPT MOMENTARILY...NOT LONG ENOUGH TO MAKE A SELECTION BEFORE IT HANGS AND FREEZES UP...
Press the Right Arrow button ( ) to select Network Setup, and then press the OK button. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
Press the Right Arrow button ( ) to select Wireless Network Test , and then press the OK button. The Wireless Network Test Report prints. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
If you did not encounter any errors while performing the steps above then I think the hardware is OK. Test the software next. Let's use Windows 7 as the test platform. I DON'T THINK THE HARDWARE IS OK.
1. Download the driver from HP.com. Once it gives you the option to either Run or Save make sure to select Save and then select Desktop as the target location where it will save the file. This is just to make it easier to find it. Once it finishes downloading the file, double click it to initiate the installation process. Follow the on screen instructions until you reach the "select how you want to connect the printer" window comes up. I ALREADY HAVE 3 COPIES ON MY DESKTOP & NONE OF THEM REACT ANY DIFFERENTLY.
2. At the "select how you want to connect the printer" window select USB and then click Next (I think there is a next button). It should asks you to connect your printer but we are NOT going to do that. Place a checkmark on the option on the bottom of the window that gives you the option to bypass the connection phase of the installation. Click Next to proceed. Once the the installation process completes, restart your computer. I HAVE DONE IT BOTH WAYS BEFORE AND CANNOT GET THE INSTALLATION TO COMPLETE ON ANY OF THE 3 COMPUTERS NOW.
If you did not encounter any errors at this point then it looks like the software installation process is good. Proceed to the next test. END OF TEST FOR TONIGHT. THANKS
1. After the computer completely boots up, connect the USB cable to the printer and to the computer. The computer should detect the printer and initiate the HP installation process for it. Follow the onscreen instructions to complete the install.
2. Try printing to test functionality. -
am trying to connect my wireless keyboard to my apple tv and it stays in a searching mode and does not pick it up. help
Welcome to the Apple community.
There probably isn't a lot you can do, since the router settings will be beyond your control. Many such services in hotels and the like, use a system whereby you need to login through a webpage, since the Apple TV cannot display webpages, there is no way around this. You would probably be best asking at reception if this is the case. -
When trying to install a wireless printer, the WEP password says its incorrect. Is this a problem with the airport, my Internet provider or HP? I know the password is correct.
Your AirPort Extreme supports WPA.
WEP is outdated and considered fairly useless, so use WPA.
Be sure you are using AirPort Utility 5.6. If you are not running Lion then use AirPort Utility 5.5.3.
AirPort Utility 6.0 cannot administer 802.11b/g base stations. -
I installed windows 8 Pro to my Mac 27', however am having a hard time to pair apple wireless keyboard with windows 8 pro. Can anyone help?
one have to go to osx and to it's bootcamp app
and make an usb stick with the apple drivers for windows
then one have to install them in windows to get the hardware working ok -
I am trying to connect a wireless keyboard with a numeric pad to my (recent) iMac running Mountain Lion. I followed all recommendations in article http://support.apple.com/kb/TS3048#1. My computer recognises the alpha part, but it does not see the numeric pad. Any advice?
Hello:
I would try resetting the PRAM and SMC.
Barry -
How can i install a wireless keyboard to my apple tv
someone please help me, i really don´t have idea how to make my wireless keyboard work with the apple Tv
You can't.
-
I'm working on trying to pair my bluetooth keyboard with the Mac. They seem to pair just fine, I can enter the code but when it's time to "enter" it won't take it. Any suggestions on what I'm doing wrong??
Thank you!!Hi, Chris.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing this issue.
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
Cheers,
Jason H. -
I m trying to install microsoft xp on my new Mac
I m trying to install microsoft xp on my new Mac, however after completing the xp installation it now say i need to have windows 7 instead of xp and hence i m not able to use my Mac OS now . Please let me know if I can use xp or in worst case scenario if I need to reinstall window please let me know how to do that now ?
boot from mac os dvd, go until top meny appears, select disk utility from there, repair HD in whole, quit disk utilities, run startup disk, select OS X to boot from, quit, quit installer
it will reboot in mac os x, go utilities - bootcamp assistant, remove bootcamp partition, reboot
select one of VM solutions:
VMWare or Parallels - commercial
VirtualBox - free
Use it.
I personally don't like other variants like Wine etc -
I tried to install OS X Mavericks but my Mac Book Pro (of mid-2009 with OS X 10.7.5) crashed
I tried to install OS X Mavericks but my Mac Book Pro (of mid-2009 with OS X 10.7.5) crashed. I had to change the Hard Disk. How can I install OS X Mavericks on my Mac laptop safely without going to another crash? I checked and found that my lap top is eligible for the upgrade to Mavericks. Can't understand what happened. Please help and advise how to do the upgrading. Thanks.
I could not report the crash as my lap top was out of order. So now it's working. Should I report the crash and to whom? Do you have any link for that?
-
I am trying to install os x mavricks on my mac air and it is asking me for an admins. passcode
Then, use one. It's the one you set up when first using the machine.
-
I am trying to install OS X liam on my Mac. Directions say launch Mac App store, click "redeem; found under quick links. Where is quick links on the Mac App store???
If you're running Mac OS X 10.6.6 or newer, click on the App Store icon in the Dock, go to its homepage if needed, and look at the sidebar on the right.
If you're running an older Mac OS X version, it needs to be updated or upgraded first.
(124500) -
tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody. -
Trying to install photoshop elements but have os 10.7.5 ,can I upgrade this?
trying to install photoshop elements but have os 10.7.5 ,can I upgrade this?
Elements 13. Can I update my OS?
Sent from my iPhone -
I have a DVD Acrobat Pro 9. I upgraded laptops and trying to install but the DVD is not readable. How can I get a new DVD or Download Acrobat Pro 1. The product is registered and I have the serial number. PS: Contacting Adobe on this issue is impossible... direct support stinks.
Download AA 9 Pro from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. Make a new backup for your archive. You might also take the DVD to your library to see if it is a drive problem. You might also carefully clean the DVD with water and soap (do not use anything that would scratch the surface or you have destroyed it for sure) and see if that solves the problem. This is particularly an issue if you have finger prints or other crud on the DVD. However, it could also be a bad drive as I mentioned. Hopefully the download solves your problem in any case (I would backup the download to CD and/or backup HD).
Maybe you are looking for
-
Plz help: Can i type Chinese using an Apple English wireless keyboard?
Kind of struggling between whether should i buy a wireless keyboard for my ipad air 2 as i may have lotta word job related to Chinese and French, and i know that French is okay with the English keyboard, at least much eaiser than typing Chinese chara
-
When are the faster i7 quad core (2.7ghz) chips going to ship in the MacBook Pros, Intel announced them over a month ago. Trying to make a buying decision.
-
Power failed during update now won't restart
Had a power failure while the iMac was doing updates. Now I have a white apple screen and the grey spinning wheel on start and that's all I get. What do I do now?
-
Is there an electronic copy available of my already purchased CD? My wife's CD-ROM drive crashed before we could install the program on her computer. But we had already installed it on mine. Any help / ideas?
-
Monitors Showing 2 and 3 times in Asset Manager
All IBM's we have show 2 and 3 monitors in device manager. I believe it is caused by the display adapter. There is no way to permanently delete the monitors. The problem is that because of this all 3 monitors also show in asset manager. Is there anyw