Im trying to upgrade the ram on the hp mini 200-4200sa. however i can't open the case?
im trying to upgrade the ram on the hp mini 200-4200sa. however i can't open the case?
This question was solved.
View Solution.
09aparker,
The removal and replacement procedures are here: http://h10032.www1.hp.com/ctg/Manual/c03163704.pdf
-wes
I am an HP employee.
Similar Messages
-
trying to load efax from new hp emachine. you get this
;You can’t open the application “eFax Messenger” because PowerPC applications are no longer supported.
when is hp, efax, or apple getting their act together to fix the issue?Hi,
The eFax service provided with the HP device is a remote cloud feature and have nothing to do with installing any software on your computer.
Any software named eFax you may trying to install is not affilated with HP in any way, as well I doubt if it is affilated with the eFax service in any manner.
In order to enable and use the eFax feature please follow the steps below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02970945&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=5070121
Regards,
Shlomi -
the whatspp massenger icon has disappeard from my screen i can only open the whatspp from search or find,How can i fix it?.
The app is not gone, it is impossible to remove it from the device.
Check all home screens and folders.
If you are unable to find it, Settings > General > Reset > Reset Home Screen Layout.
As a last resort, restore from backup. -
I got the receipt no. 173039070909,however, I can't open the magezine which I have bought. What's the problem?
Problem you have to fix with the publisher/developer.
Or, get iTS to refund due to content problem.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
Hi,
I just finish installing the OS X v10.7 Lion on my IMac, but i can´t open the finder option or any folder (documents, download, movies, etc). I´m going crazy because i need to open my files, plis some help here.go to disk utility and verify and repair your disks then run software update to get up to date with 10.7.2 then see if your issue is fixed.
-
Since upgrading to Yosemite on my iMac I am frequently getting "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again". This is with both a WiFi and Ethernet connection. The server is working fine from other devices using WiFi onto it such as iPhones, iPads, MacBook (which is also on Yosemite) so don't believe its an issue with the server.
I am also noticing page load very slowly when this problem is not occurring.Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
Can I open the Mail app without configuration an email address?
I'm trying to open a .eml file, which seems possible in the Mail app. However, I can't open the Mail app without configuration an email account. I don't have an email account to configure; just want to open the file. Or, let's suppose, I just wanted to browse the interface? How to avoid the account setup part?
Just enter anything short & plausible in as few fields as you can get away with : '[email protected]' works here, you'll get a brief 'not responding' or such at each stage, but it does allow you to use Mail.
-
Touchscreen defect? Can't open the iPad mini
My daily appointments show but I cannot open the calender itself, the photo-function is working - but nothing else.
I can't open the device, as the touchscreen does not respond. Tried to turn it on and off - no help.
Does any one know, what I can do without doing a reset and risk loosing my calender, my notes, my photos ...?Hey there LouTH,
It sounds like you are unable to swipe your screen to open it because that part of the touch screen is not responding. I would use the troubleshooting from the following article to help resolve the issue:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/TS1827
Clean the screen with a soft, slightly damp, lint-free cloth.
Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see theService FAQ for your product.
Additional Information
Tip: To isolate an issue related to a portion of the Multi-Touch display, follow these steps:
Open the Maps application and double-tap each corner, then the center, to verify that it zooms in to each section.
If a specific area is affected in another application, note the location and try to verify touch functionality for that location in the Maps application.
On iPhone and iPod touch, you can also use Calculator:
Open the calculator app to test all but the top row of the screen. Press each button on the calculator and verify activity.
To test the area at the top of the screen, rotate the device to change to the scientific calculator and press the buttons in the left or right two rows.
When speaking with a Mac Genius or Service Provider, you can use this information to assist with evaluation of your issue.
Thank you for using Apple Support Communities.
All the best,
Sterling -
Hello, we have a Mac and an ipad, the Mac is working and wifi is on and the ipad's wifi is on too, but Ipad Safari can not open the page because it could not connect to the server, does any one know that?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I can't open the latest version of iphoto.
When opening the latest version of Iphoto an error message appears that says; You can't open your current iphoto library using this version of Iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto. What? If I can't open the current library using the latest version of iphoto, and I am asked to make changes the the newest version!!! I'm asked to run in circles chasing my tail... Help please?
Welcome to the Apple Discussions. That sometimes is an indication of a damaged library. Backup and launch iPhoto with the Command+Option keys depressed to rebuild the library. Select options #3 and #5.
Click to view full size
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.x.x), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete. -
Hello, i can't open the links as youtube,Apple ETC in the Bookmark toolbar.
Hello, i can't open the links as youtube,Apple ETC in the Bookmark toolbar of Safari.
If i go to the toolbar area with my mouse cursor the buttons light up, but when u click on them, nothings happens.
I use Safari 6.0 and OSX 10.7.4. The browser and browser arrows works good.
I also can't open the bookmarks and the reader.
Any solutions?
Thanxs in advanceHello,
I found the solution, it was the downloaded ...... NCH toolbar. I have uninstall it and everything works fine -
I'm trying to upgrade to iTunes v 10.6 on a windows vista pc and keep getting the error, "Invalid Drive/E". What do I do to get past this?
Open a Windows Command prompt, e.g. Hit Start > Run, type in CMD and press OK.
Type in SUBST E: C:\<enter>
This will map E: to C: until the machine is restarted or you enter SUBST E: /D at the command prompt. Now you can try uninstalling or upgrading the software again.
(If upgrading software which lets you choose a location, install the software in the default location, not on the E:\ drive.)
See here for more info.
tt2 -
When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle.
After it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"Hi bahaluly,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
Get help with iOS update and restore errors - Apple Support
Solve network errors
Related errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or "The device isn't eligible for the requested build." These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device.
Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
Cheers,
Mario -
can i upgrade the ram to 4MB on my first generation mac air, can i upgrade the ram to 4MB on my first generation mac air
No. Max supported is 2 GBs.
-
after upgrading to ios 5.1 on my iphone 3gs, the battery percentage dosent work well, it dosent move. how can i fix the problem?
Have you tried doing turning the battery level display off and then General -> "Reset all settings"? You won't loose any data and that should do the trick.
Maybe you are looking for
-
How do I TRANSFER a blank line to a dataset?
Hey everyone, Learning all about datasets today, and it seems clear enough. What I'm doing is outputting a "report" of sorts to a dataset during a batch process. I'm reporting on whether or not each transaction processes successfully, as well as pr
-
Stucked between SQL Tuning Advisor and and SQL statement
Hi, There is an important query running on my system which consists MEMBER OF function. At first place let me explain why i used MEMBER OF, I am sending a string( eg : #123#124#125) to query and a function converts this string into a number array. Af
-
Trying to install Bootcamp 4 with non Apple video Card
Hi folks So I had to buy a new video card (ATI HD 5850 1 GB DDR5) but of course, I lost acces to the boot screen, so I'm wondering how to install Bootcamp, since I don't have acces to the boot screen. In some point of the Bootcamp installation, the M
-
Has anyone tried to remove the stickers from the wrist rest of their new Yoga?
I'm afraid to leave any residue, so I was wondering if anyone else has tried? Thanks
-
Cost Centre Reports Documentation
Hi All, I am new to SAP and curently building some training docs for Cost Centre Reporting. Can anyone help me by sending some documentation on Cost Centre reports(types & functions).. Anyone who has already done this kind of work before..pls help.!!