Im using a network drive with time machine and im getting error 45. Time machine will not work now. Why?

I bought a seagate goflex home 2TB network drive. It worked with time machine for a couple of weeks than now it wont. It just says ERROR 45 now and will not back up. Why?

Welcome to Apple Support Communities.
According to several related Time Machine Error 45 threads in these forums, Time Machine is not well suited to backups on most non-Apple network drives.
https://discussions.apple.com/message/10744727#10744727
https://discussions.apple.com/message/15643759#15643759
https://discussions.apple.com/message/11929252#11929252
https://discussions.apple.com/message/13164522#13164522
One of the discussions provides an off-site link to these suggestions:
http://web.me.com/pondini/Time_Machine/Troubleshooting.html

Similar Messages

I have a 2nd generation iPod touch and it shows to be connected to WiFi but will not access the internet, please tell me what i can do, because i use this device for work and it make things difficult that it will not work now. Please help, thank you!

I really need help, my ipod shows to connect to the WiFi but then it will not let me use the interent it says no connection but according to my screen i have WiFi connection, i am very confused an i would really appriciate it if someone could help me sort out this problem so i can start using my iPod for work again.

Even though the iPod shows as been connected, it might not have actually received a valid IP address via DHCP from your Wi-Fi access point or router. Head to Settings -> Wi-Fi and tap the > next to the network you are connected. If 169.xxx.xxx.xxx is listed for an IP Address, then your iPod did not receive a valid IP address. To correct this you can reboot your router by unplugging it from power for about 30 seconds.
It wouldn't hurt to also reset your iPod. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting assistance.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partition?

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partitioned Time Capsule? I understand that the Time Machine (software) cannot backup a networked drive (the external) and that Time Capsule (the router/wireless hard drive) does not have its own backup software... so it won't backup the connected drive. What I would like is an alternate solution for having an automated backup of a networked drive. A 2TB Time Capsule has more than enough space for Time Machine backups of my family of Macbooks, so I had hoped to mirror a 500GB external drive (with shared media files) to a portion of the Time Capsule internal hard drive. I assume this would require a partition of the Time Capsule drive. If not, would the sparse file from the various computers being backed up need to be copied to the external drive as part of the RAID1 setup? This seems like overkill for the Time Machine backup, but it would cover the media files.

The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
It isn't possible to partition the TC although you can create a image area.
The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
Read carefully the speed of the USB drive plugged into the TC.

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! What is wrong?

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?

I hope that link points to mozilla.com or mozilla.org
You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner

I upgraded for Firefox 4 and now my simplePass identity protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE.

I upgraded for Firefox 4 and now my HP SimplePass Identity Protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE. It worked with the previous Firefox version but now when I use the internet, it doesn't even acknowledge I have the scanner. When I run my finger over it, it opens the settings panel but does not allow use of the already saved information or allow new information to be entered. I need this corrected. Any suggestions?

I asked this same question, and just received a response:
"Thank you for contacting DigitalPersona. There will be no update releases
for DigitalPersona Personal in the future. There will be no updates for
Firefox 4 nor Internet Explorer 9. IF they work they work, if they do
not work with DPPersonal, then you will have to decide to either keep
DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona
is leaving the consumer market and is focusing on business applications.
In fact, DigitalPersona Personal will not longer be supported after
Mid-April of this year.
We apologize for any inconvenience this might cause. Sincerely, Tech Team "
In other words, there will be NO update.

I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

Add-ons contain a range of compatible Firefox versions, and Firefox honors the listed range by disabling the add-on if you are trying to run it on an unlisted version.
I'm sure Yahoo! will update its toolbar eventually, but not every add-on maker supports beta versions of software.

I have been having nothing but trouble with OS 10.6.8. Many of my appliatins will not work.. HOw can I revert back to a previous version of OS x?

I have been having nothing but trouble with OS 10.6.8. Many of my applications will not work.. HOw can I revert back to a previous version of OS x?

Before you revert anything try this:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Next time don't post something like "nothing but trouble." Tell us exactly what the trouble is and provide any additional information such as error messages.

I am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad. an unknown error occurs (1631). what do I do??

am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad. an unknown error occurs (1631). what do I do??

The search bar can be very valuable...........
In using it, I found out other's have had this issue and it likely means you have a 3G iPad? If you do, go into settings and turn off cellular data, then try to update again and you should be OK........

I just purchased Adobe Photoshop Elements 13 but my computer is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption

I just purchased Adobe Photoshop Elements 13 but my PC is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption code and serial numbers. Can I download the program online somewhere? If I download a trial version for instance will it allow me to enter my serial number and use it for the full program?

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I fell in a lake with my I Phone in an Otter Box case, it work this morning but will not work now all I get is a white apple on the screen

I fell in a lke with my iphine in an Otter Box case yesterday it workied this morning but it will not work now all I get is a white apple on the screen when it is pluged in to computer

Yes, water and electronics do not mix. Water damage can get worse with time.
You should've left it to fully dry out in a bag of rice for a few days, and hope that the water hasn't corroded any of the electronics inside.

Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Help

am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

Hi,
Here is a similar thread for your reference:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
Hope this helps
Vincent Wang
TechNet Community Support

HT1414 Things that i downloading the first time it not working now why is that

Things that i downloading the first time it not working now why is that

Hi there,
I would restart your device and pc, it could also be a faulty USB connector.
Try reinstalling iTunes.
You could also try running iTunes as an administrator (Windows), you can do this by right clicking on the icon and clicking "Run as administrator".
If this still continues, then take your device to an Apple retail store.
Hope this helps!

My airport is turned itself off and lose contact with my wifi router, trying to turn it on again will not work, I have to restart my Mac for it to work again, but after 5 minutes, the problem is to go back again.

my airport is turned itself off and lose contact with my wifi router, trying to turn it on again will not work, I have to restart my Mac for it to work again, but after 5 minutes, the problem is to go back again.

Hi ..
Follow the instructions for resetting the SMC > Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Looking to buy a hard drive to use as network drive with EA4500, help with compatibility options

I need a new hard drive, I would like at least a 2TB, or more ideally a 3TB. The only drive I see on the list that would work is the STAY 3000100 Expansion 3TB External HD USB 2.0. There is another 3TB drive that shows as being compatible, but it's a Western Digital and I haven't had good luck with WD. I was wondering if anyone else has a 2TB or 3TB drive that they are using successfully, even though it's not on the tested compatible list. I have already tried using my OWC Mercury On-The-Go 1TB, and it won't even recognize a drive as being plugged in. Any recommendations would be greatly appreciated.

As far as I know, that is the only list of compatible drives with the router. So, yes, that is the list I am referring to when I said "compatible drive list". There are very few 2TB or 3TB drives on the list. I would really like to be able to use a 3TB drive with a couple partitions, and that seems almost impossible with very few options. I have been reading around the last couple days and I hear lots of reports of people successfully using drives that are not on the tested compatible list. I just wanted to know more options from people like that.

Using XP Professional SP 3 with latestest version of Firefox, the US Airways web site will not work properly. I can still make it work with MS IE

I am using XP Professional SP 3 with newest version of Firefox, the US Airways web site does not work. I can make the site work with MS Internet Exp. What do I need to change to make Firefox work?

Can you clarify in which way the site isn't working?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I am trying to install Lightroom 4 on a new Windows 64bit machine and keep getting "Error 1935.

I am trying to install Lightroom 4 on a Windows 64 bit machine and keep getting "rro 1935. An error occurred on installation of Assembly component 643587C0-E0C..."

http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html
Mylenium

Im using a network drive with time machine and im getting error 45. Time machine will not work now. Why?

Similar Messages

Maybe you are looking for