IM08 supports new YouTube Feature 'Watch in high quality'

maybe not all of you have noticed the new feature on YT, to playback uploaded videos in higher quality (.. IF the upload offered higher quality... )
the difference is amazing:
1) shows no detail.. +who's that mennekin?+
2) shows the new 'button'.. feature, click on it, than.. :
I added a zoom, to show 'detail' of face.. +ahhh, son #1..+
this 'HighRes' feature is NOT supported by all codecs.. I 'manually' encoded my test video to mpeg4/640x480 = no button, even adding manually that '&fmt= 18' snippet to the YT URL doesn't show 'more'..
a divx/640x480 in a mov DOES show the button..
the most convenient way is obviously an iM08 upload..
test yourself..
http://karsten.schluter.googlepages.com/watchyourytvideoinhires
this post was triggered by this article:
http://www.tech-recipes.com/rx/2825/howto_get_high_resolution_youtube_videos_withbookmarklets
.

master.p wrote:
so that's why one of my videos on youtube has this button and the other one doesn't. i got it!
what codec was in use with the one, which does not show a 'button' ...?

Similar Messages

  • Why the apple told about this system for the new iphone 6 but the mine no see the change...?1:28 p.m. Wi-Fi calling is a new feature for making high-quality calls when cell conditions are poor.

    Hi apple. in the Keynotes about the new iphone you say..
    1:28 p.m.
    Wi-Fi calling is a new feature for making high-quality calls when cell conditions are poor.
    The question is Work That? i no see the change for me POOR signal here on my office..
    my carrier att. have very Poor Signal here on Aguadilla PR.. i take this PHone for this keynotes about the wifi calling is a new feature...
    please i need a new respont.. and check the security about iphone Someone call reply the text messenger from the Block area.

    It sounds as if you only had one line with an upgrade available. So you can only upgrade one line. For you to upgrade as well, you will have to wait until your upgrade is available. You can check that at MyVerizon. That's just how it works. All carriers and phone brands are the same. I have to wait until February to upgrade. The only thing you can do to get the new iPhone, is add a new line. But then you're paying for a line you don't need.

  • Does Designer9i support new DB features from 9iR2

    Hi,
    I am using Designer6i and was wondering if Designer9i supports new Database features of Oracle 9iR2.
    So it is possible to define the following new DB features:
    - Table Compression
    - List Partitioning
    - Composit Range List Partitioning
    - Bitmap Join Indexes
    - External Tables
    Thanks for any feedback
    Maurice

    Maurice,
    Designer does not support these features of the 9i database. We have no plans to add this functionality to Designer.
    Please refer to the Tools Statement of Direction, the Designer maintenance release document and the related FAQ on OTN (http://otn.oracle.com/products/designer/index.html)
    Regards
    Sue Harper
    Designer Product Management

  • Can I set the YouTube app to default to High Quality?

    I've looked through the settings several times, no luck.  Every time I go to watch a YouTube video it defaults to Normal Quality, I want it to default to High Quality.  Can this be done?

    Try pressing the "HQ" button in the lower right hand corner of the video. You can also tap the menu button, hit more, and select "Watch in high quality."
    I have provided a link for additional information. Click here http://www.droidforums.net/forum/samsung-fascinate-faq/86152-how-change-video-quality-youtube.html

  • Exporting final project for youtube (with high quality)

    hey guys,
    i have been trying to export videos and upload them onto youtube giving them a high quality look for some time now.
    the website recommends for the best quality:
    -mpeg 4
    -320X240
    -MP3 audio
    -30 fps
    there is even a video on it here:
    http://www.google.com/support/youtube/bin/answer.py?answer=55745&topic=10526
    i tried two different ways of exporting my project. i use fc express hd on a macbook pro...the first export was an mpeg 4 divx export. i used the 4 recomendations but it still came out pixilated. i then tried the regular mpeg 4 option in the export menu. this one had a different audio option. there was no mp3 listen and ACL audio or something like that,
    either way they both came out pixilated! this was only a 5 minute long video. i have seen plenty of videos on youtube that were 8 minutes long and crystal clear.
    there must be SOMETHING i should change in my exporting options! please help! its been like a year and a half now that ive been searching for clear youtube videos!
    thanks for your time,
    Mike

    hmm i tried there suggestions and unfortunatly it came out pixilated!
    i was excited to see the results too because that page given seemed like it would work...
    i double checked all of the settings and they matched up with what they suggested...
    does any body have any suggestions? thankyou!

  • New Purchase feature will allow to watch, but not offline

    Buyer beware!
    New purchase feature of the AppleTV IOS system will allow you to purchase TV Shows and such, however you can NOT download purchased content.  I have an AppleTV and a Mini Server with a 4TB Disk attached, and when I made a Purchase on Apple TV, I get a counter for how long it will take to sync to iCloud for my personal viewing pleasure, but I can not download to my Mini Server's iTunes library.  I had to purchase a 2nd copy to store locally and use to sync to my devices for watching offline. 
    L A M E!  If I purchased it, I like that iCloud will allow me to stream it and watch it via Live TV, but why can't I download it to watch offline.  Do you honestly think I'm going to travel with my AppleTV and stream video's over an Airplane's wireless 36000 feet in the air on my way to Germany?  C'MON!
    Also, why am I waiting 39 minutes for the episode to be made available, if I rent it I can stream it instantly, if I pay you MORE for it, I'm penalized by having to wait over 1/2 an hour to begin my stream session.
    Call me confused!
    - Disgruntled iTunes High Spender

    All you have to do is open iTunes  select iTunes Store and on your home page right hand side under Quick links
    there is a purchased link.
    In here you will find your Music, T.V. Shows, Apps and Books that you have purchased.
    Find the episode you purchased on your AppleTV in the list on the Left.  Select it then click on the Cover art.
    You will get a Pop up window and be able to download from there.

  • Why is the new OS 6 does not have youtube feature on it?

    I recently updated my ipad with the new OS. Why does Apple take away the youtube feature. It is such a disappointment. My son plays the ipad for 2 years and he is upset when this feature is no longer available on his ipad.

    Try one of the YouTube apps from the store (there is an iPhone optimised app from google), or try accessing it via Safari : http://m.youtube.com

  • My mac OS X 10.4 doesn't support new I tunes 10 it needs a SO X 10.5 or higher. My new I phone G4 requires a higher version. I can't download my existing library to my new phone.  What can I do?

    My mac OS X 10.4 doesn't support new I tunes 10 it needs a SO X 10.5 or higher. My new I phone G4 requires a higher version. I can't download my existing library to my new phone.  What can I do?

    upgrade to at least OS X 10.5.x or, if your machine supports it, OS X 10.6.
    you should still be able to get 10.5. from Apple but it'll run you about $ 130. OS X 10.6. costs $ 30.

  • I upgraded to 6.02 and still get this message from Gmail: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version."

    When I opened Gmail in my Firefox browser, I got a message I've never seen, before: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version." I clicked on upgrade to a new version and was taken to the Mozilla site, where I downloaded the latest version of Firefox... then, when I restarted my computer, Gmail still gives me the same message!! What's going on?

    Firefox 4 and later require at least OS X 10.5 and a Mac with an Intel processor.
    *http://www.mozilla.org/firefox/12.0/system-requirements/
    For an unofficial Firefox ESR 10.0.4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    *http://www.floodgap.com/software/tenfourfox/
    *http://www.macupdate.com/app/mac/37761/tenfourfox
    Be aware that TenFourFox doesn't support plugins.
    *http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1004
    *http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    *http://code.google.com/p/tenfourfox/wiki/AAATheFAQ

  • Lock screen does not support the new panoramic feature in iOS7

    Lock screen does not support the new panoramic feature in iOS7.
    You are supposed to be able to take panoramic photos and then set them as your lock screen background.
    Then you can move your phone around to see the full photo.
    My i5 doesn't !!!!!!!!!!!!!!!!

    I believe this was removed in the later betas of IOS 7. It may make a reappearance in a future update.
    It was mentioned at WWDC when iOS 7 was announced, but there is no mention of it on the Apple website.

  • X Series is here – New Counter Features!

    Hey All,
    The new X Series Multifunction DAQ devices have been announced – check them out here.
    I’m posting here because I think X Series has several new counter features that many on this forum have been looking for. The user manual
    will have all of these details and more with timing diagrams but I
    thought I’d summarize a few of the sexier features and open it up for
    comments/feedback.
    First off – what stayed the same between
    M Series/TIO counters and X series counters? The pinouts between M and
    X series are the same so the PFI lines and default counter pinouts are
    the same. The DAQmx programming is the same (you’ll need DAQmx 9.0, it
    should be up this afternoon) and all the functionality that was
    supported by M Series is supported by X Series, though a few behaviors
    may have changed. Counters are still 32 bit.
    Now on to
    the fun stuff – the big one that I tend to overlook: X Series has 4
    counters per board! They all have the same features and Freq Out is
    still there too (with an additional 20MHz timebase).
    Timebases:
    X Series devices have 100MHz, 20MHz and 100kHz timebases. Note the
    difference between 80MHz on M series and 100MHz on X series. DAQmx will
    take care of the difference for you, unless you were programming in
    terms of ticks and hardcoded in numbers based off of a 80MHz clock. 
    Counter
    FIFOs: X Series has a 127 sample FIFO per counter. When combined with
    PCIe/PXIe, our benchmarked buffered counter rates went from ~350k on M series
    (with a 2 sample FIFO) with a single counter to 10MHz on all four
    counters (160MB/s streaming rate). The FIFO also allows us to implement…
    Buffered Counter Output: Probably my favorite new feature. You can
    now use a multi point write on counters and write out a buffer of pulse
    values. There are two timing modes for this: implicit and sample
    clocked. With implicit timing, every idle/active pair you write is
    generated as a pulse. You can vary the idle/active time for every pulse
    in your pulse train. Check out the "Gen Dig Pulse
    Train-Buff-Implicit-Cont.vi" shipping example. With sample clock
    timing, the idle/active time are updated every time a sample clock is
    received. Check out the "Gen Dig Pulse Train-Buff-Ext Clk-Cont.vi"
    shipping example. These modes give you much more control over your
    waveform – now everything about it can be hardware timed. Also, I’ve
    benchmarked the output rates at 10MHz on all four counters at the same
    time.
    Finite pulse train with one counter: Each X Series
    counter has an Embedded counter paired with it. The embedded counter
    isn’t directly programmable, but it does allow you to do counter
    operations on one counter that used to take two.  A finite pulse train
    used to take two counters – one to generate the pulse train and one to
    gate it. Now a counter generates the pulse train, and its embedded
    counter counts the TCs and disables the counter when it reaches the
    number of pulses to generate.
    More sample clocked
    measurement modes: Edge counting and encoder measurements always
    supported sample clocks, all other counter measurements were implicitly
    (timed by the measurement waveform) timed. With the addition of the
    sample clock terminal to the counters now all counter measurements
    (except for semi-period) support sample clock timing. You can now get
    the pulse width of the pulse just before the sample clock rather than
    getting all the pulse widths and figuring out where they happened in
    time. Why not semi period? We added a new “pulse” measurement instead
    that returns a sample that contains the high and low time (or high and
    low ticks, or frequency and duty cycle) so for each sample clock edge
    you get a full pulse spec. Semi period still supports the same
    measurements it used to, just not sample clocked. Speaking of sample
    clocked…
    Sample clocked frequency/period measurement
    with averaging: X Series still supports the three frequency modes: Low
    frequency 1 counter, 2 counter High Frequency and 2 counter Large
    Range. In addition it supports sample clocked averaging. This is
    essentially a method that is high accuracy method based on the sample
    clock rate. With the same measurement time it has the same accuracy as
    the Large range mode but it doesn’t take two counters.  Note, counters
    do not have their own internal sample clock so you have to provide them
    with an external signal.
    Hope this helps,
    Andrew S
    National Instruments
    Multifunction DAQ Product Support Engineer
    Getting Started with NI-DAQmx
    Measurement Fundamentals

    Hi guys,
    I drew up a schematic of one of the applications I need to get running in our lab. To recap:
    1)      We have several piezo controllers for nanopositioning of samples under a microscope, some of them driven by a digital circuit that handles coordinate programming and trigger line programming (for syncing detectors to the piezo motion), other controllers are analog and need to be driven by voltages.
    2)      We would like to emulate the behavior of the digital controller using the analog HW (we have much more analog controllers than digital ones).
    3)      The basic implementation is like this (see also slide one in the attached pdf file) and runs perfectly:
    a.       A global pulsetrain ticks with a certain frequency
    b.      At each tick a voltage is written on an AO line and this tick is also sent to an RTSI line to sync multiple detectors
    4)      To fully emulate the digital controller we also need to implement 4 trigger lines that exist on the digital controller. These trigger lines allow for fully programmable pulsetrain output that is in sync with the movement of the piezo. Slide two in the attached pdf illustrates what is needed. These trigger lines allow for much more intricate syncing of our detectors (only measure during certain parts of the motion instead of all the time).
    After a lot of thinking and experimenting with the existing M series boards back here I came to the conclusion that the desired behavior is not possible with an M series board since they only allow for the output of “simple” pulsetrains with a given frequency.
    Looking at this webpage (http://zone.ni.com/devzone/cda/tut/p/id/9384#toc3) however, I think that the X series board would offer exactly what we need since it allows for buffered counter output that enables definition of very complex pulstrain “shapes”.
    Looking at the schemes I provided, could someone confirm that the X-series covers our needs? If this is the case, we would be interested in purchasing these kinds of boards.
    Cheers,
    Kris Janssen
    Attachments:
    Raman Imaging Timing Implementation.pdf ‏76 KB

  • Why does YouTube on Firefox offer so few quality options even if the video can be viewed in higher quality on Chrome or when it is embeded?

    I've noticed that YouTube only offers three quality options for some videos when viewed on the video's page (240p, 360p, and 720p) even while the offered video elsewhere is significantly higher. One example of this is the following video: https://www.youtube.com/watch?v=DvY5irWC7kA (/u/aygoman of /r/Oman); when viewed in Chrome or when embedded in a page (such as through the RES addon), the video options are more verbose: 240p, 360p, 480p, 720p, 1080p, 2160p.
    While I do not typically view above 720p, sometimes I would like the option to view a video in either 1080p or 480p and cannot for some unknown reason.

    Are you using the YouTube HTML5 media player or the Flash player?
    See also:
    *http://googlesystem.blogspot.com/2013/10/youtube-drops-support-for-1080p-streams.html
    *http://googlesystem.blogspot.com/2013/10/youtube-shows-if-your-browser-supports.html

  • Flash player wont work on Hulu or newer youtube videos

    i recently downloaded flash player 16.0.0 and now my hulu account and newer youtube videos dont work im sure that there are other features not working as well i have just not played around with it enough to find them, i was wondering if anyone knew how to fix this and what the problem is

    The details on why Adobe dropped support for Android are here, but yeah, we haven't released an Android Flash Player since late 2012.
    Adobe roadmap for the Flash runtimes | Adobe Developer Connection
    There are a few alternatives that you can use to get Flash on your phone.  They're mostly cloud-based web browsers, where they run Flash in the cloud and stream the content down to your phone.  It works surprisingly well.
    A cursory Google search for "Android Browser Flash Player" turns up these options:
    http://lifehacker.com/now-browser-is-a-lightweight-browser-for-android-with-f-1548329538
    Puffin Web Browser - The fastest mobile browser with Flash support over cloud on iPad, iPhone and Android.
    https://play.google.com/store/apps/details?id=com.appsverse.photon&hl=en

  • IM08 supports alpha channels/'transparency'

    in case, this is new to you (it was for me...):
    iM08 supports pictures, which contain alpha-channels..
    so, it is now quite easy for the ambitious iMovie-maker, to add 'bugs', 'mattes', even soft-bordered 'masks' to your project.
    as an example, I'm adding here a 'bug' (=stationairy logo') to one of my projects....
    I create a picture in Photoshop Elements, containing transparency as 'background', and my lil' logo drops a shadow (not seen in this size). I then import to iPhoto, as .tiff, which transport transparency-info ... the Photo-bin shows it (1)
    than, the usual routine: drag it over your video (2) ... the blue blar indicates the position in time, you can elongate it, etc.
    as you see in the preview (3), my logo is added, ... in the final movie, it drops a nice semi-transparent shadow onto my video..
    for sure, you can create in a pic processor other things to 'add', e.g. 'dream masks/mattes', which add the movie a fade-to-white borders (flowers?), ... or, simple arrows, circles, boxes for instructional videos.. keep imagine!
    a more elaborated and illustrated How-To as usual on my site:
    http://karsten.schluter.googlepages.com/im08tricks
    (.. lists gets longer, should think about restructruring that...)
    just to mention that: that was NOT possible with iMHD≤6 ...
    Have Fun with iMovie!

    In addition to what David says:
    if you rendered your timeline already, then exports will have black background.
    If it's unrendered and then export, then the alphachannel will be included (with a codec that supports alphachannels of course)
    to check what you are exporting: in the top of the canvas click the most right (of three) button and choose Checkerboard as the background.
    If you now see the checkerboard, then you'll export with alphachannel. If you see black background then you've already rendered, and black will be exported. You can trash your renders using Tools > render manager. Or simply drag a clip over (1 videolayer higher) your title clip. And then delete this clip. It flushes your render.
    Hope this helps
    Rienk

  • I am using Firefox 3.6 on my PC , and now, when I select File New Tab (Ctrl+T), no new Tab shows up. Nor does it show up when I click the new Tab symbol next to my other tabs. How can I get the New Tab feature to work again?

    In the past 48 hrs, all of a sudden, the New Tab feature on my PC< using Firefox 3.56, simply stopped working. I did not change settings, or download a new version of Firefox. it just stopped working. There are other scenarios where it does still work (for example, if I want to open a link on a web page, I can right click and open the link in a new tab), but if I simply want to have multiple websites open at once on my PC, I am forced to have multiple versions of Firefox open, as my New Tab option seems to be disabled or something. Can you help?

    Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
    For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for