Imac 11,2 double screen with a W2253V lg screen through mini dv to vga adapter. resolution issue

I am apparently not able to bring the screen resolution up to it's full 1920 by 1080 potential. It apparently maxes out at 1400 x 1050 in the display panel but in reality looks much worse. Blurry, pixelized. It also does not fill the horizontal lenght of the LG screen. LG currently does not make a driver for mac os.
Any ideas on how to crisp the secondary display ?

Did you click Detect Displays in the Displays preferences?
I downloaded the manual for that monitor and according to a page in that many of those resolutions aren't even supposed to exist!
There is something near the beginning of that manual about a Auto image adjustment.  Not sure if it has anything to do with this or not.

Similar Messages

  • No image on screen using Mini DisplayPort to VGA Adapter

    Received mini today.  After unboxing, read through the packet.  Then began to hook everything up as directed.  I used a Mini DisplayPort to VGA Adapter to connect the monitor from our now dead desktop to the mini.  After double checking all connections, I hit the power button.  I immediately heard the apple chime. Then the monitor showed the grey apple start up screen.  Suddenly the monitor went black and said it was going into sleep mode.  I can't get it out of sleep mode when connected to the mini.  It is NOT the monitor or the adapter.  I plugged the monitor straight into a netbook and it worked.  Then, I plugged the monitor using the adapter into my MacBook Pro and also got it to work that way.  So I tried replugging the adapter into the mini.  Still can't get an image on the screen.  I can't complete set up or use mini because I can't get an image.  Any suggestions or ideas?  I will call apple in the morning if I can't figure it out tonight.  But I'm hoping someone can give me suggestions.  Thanks for your help!

    I had the same issue when I bought my mac mini last week apart from I wasn't even getting the initial grey screen. I went back to the Apple shop and they gave me another mini and fired it up in the shop using the adaptor on an old VGA monitor. It worked perfectly.
    When I got home I set it all up again and still had the same issue. I nearly threw out a couple of monitors as I thought they were broken.
    However, had a look around the web and found this suggestion:
    Shut down the mac and disconnect the adaptor from it. Now fire the mac up and let it boot up FULLY. Once it has had a chance to boot up fully, only then plug the adaptor in.
    Worked for me and I haven't had the issue since (touch wood). Hope this helps.

  • Getting a Mini DisplayPort to VGA Adapter & Monitor to Work with an Xserve

    First let me say that I'm very new to Xserve's and OS X Server and any help is greatly appreciated.
    I have an Xserve with a connected Mini DisplayPort to VGA Adapter and a confirmed working VGA monitor. There is also a keyboard and mouse plugged into the front USB port of the Xserve. The internal SSD has been formatted clean.
    I've been trying to boot up from the optical drive on the Xserve using the 10.6 DVD. I use the front panel/system identifier button to boot up and I make sure enclosure lock is unlocked. Each time I try to boot up, the monitor stays off and the DVD is spit out.
    I eventually got the DVD to stay in, and the screen showed the grey screen with black apple and the spinning black circle on the bottom. However, after a few minutes the screen turned orange in color. Using Screen Sharing, it looked fine. I tried a second VGA monitor, but that still didn't do it.
    So with the DVD still in, I stay connected via Screen Sharing and begin the installation process remotely, thinking Snow Leopard will recognize the monitor eventually. Well, 10.6 is now fully installed, but still no working monitor.
    I then decided to try the Mini DisplayPort to VGA Firmware Update. I download and run the installer, but it tells me, "The Updater could not find a Mini DisplayPort to VGA Adapter to update."
    How can I possibly get this monitor working?
    Thanks in advance.
    Message was edited by: nappy

    Just ran in to this myself -- Nehalem Xserve running 10.6.2 Server with an MiniDisplayPort to VGA adapter connected to an Avocent Switchview 1000 KVM. Took the server offline to install RAM and after rebooting, no video. Oddly enough, the KVM's LEDs showed a display connected but Apple System Profiler showed no adapters connected to the video card. Nothing seemingly worked -- rebooting, shutdown/restart, and/or hot-plugging the adapter made no difference. I also tried a second MiniDisplayPort adapter to no avail.
    Note that the MiniDisplayPort to VGA Firmware update had already been applied to BOTH adapters prior to this issue appearing.
    What restored video output on our system: reboot from the Snow Leopard Server install media, video reappears over the adapter, and after that I can reboot from the SSD boot drive running 10.6.2 Server with video output working over the MiniDisplayPort to VGA adapter.

  • My MacBook screen is stuck in "presentation" mode after using my "Mini DisplayPort to VGA Adapter." How can I fix this?

    My MacBook screen is stuck in "presentation" mode (I don't know the correct term) after using my Apple Mini DisplayPort to VGA Adapter - meaning the screen fonts and windows are larger than usual. How can I fix this? I've changed the display settings to modify it a little, but it still doesn't look right. I reinserted the adapter numerous times and restarted my computer, it still hasn't worked. Help!

    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Mini DisplayPort to VGA Adapter NOT DISPLAYING ON EXTERNAL SCREEN

    Hello!
    Mid 2012 MacBook Pro
    Processor  2.9 GHz Intel Core i7
    Memory  8 GB 1600 MHz DDR3
    Graphics  Intel HD Graphics 4000
    Software  OS X 10.9.3 (13D65)
    I have a mid 2012 MacBook Pro, I have connected a Mini DisplayPort to VGA Adapter in order to watch movies on a HP w19e LCD display.
    Ive been using this adapter for a year now and I have never had any problems with it, until now...whenever I connect it to my mac's display turns black, and nothing happens, so I wait and the LCD display shows the unfurtunate NO SIGNAL message, so I wait a little longer and still nothing happens, I unplug the Mini DisplayPort and plug it back in, and nothing happens, and when I say nothing happens I mean nothing happens, my mac's display is black as if it was in sleep mode, I get no signal on the HP LCD and I can't get my computer's display to show image again, the only way to do it is to force restart it.
    I looked up the problem and I found a forum with a possible solution for it and did as it said.
    1) Restart the computer in Safe Mode with display attached (shut down and restart while holding down shift key).
         The display showed up without distortion.
    2) Change the display to my desired preferences (dimensions and refresh rate).
    3) Restart computer. ...and it works like a charm.
    I followed the directions and it worked... but after I restar to go back to um.. normal mode, the problem is back.
    Please I need my LCD screen how can I fix this.
    I hope I didn't confuse anyone, sorry for my english
    THANK YOU
    I leave the link for the Apple Forum
    https://discussions.apple.com/message/18816392#18816392

    I'm having the same problem. When I try to connect to the switch in our conference room (connecting both a flat panel display and/or a projector, both with much higher native resolutions), all I get is 640x480. This is a huge problem to using bootcamp, and I really need to get this to work. I was able to get a higher resolution 1280x800 on a separate, portable display, so I'm wondering if people have the problem with standalone projectors or only with projectors connected to some sort of switch, in my case an Extron MPX423A. I have also tried this in both Windows Vista (32-bit) and Windows 7 RC1 (32-bit), with the bootcamp drivers and the latest NVidia drivers, and the behavior is the same all around.

  • Will a Mini-Displayport to VGA adapter work with new macbook pro 2011

    I was thinking of getting a mini-displayport to vga adapter for my external monitor I wanted to hook up but I wasnt quite sure whether it would work as my macbook pro has the new thunderbolt port, I was confused if the new port would only work with the thunderbolt displays. Could anyone help me as I'm not too sure what will work.

    I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

  • Mini Display Port to VGA Adapter Having Issues with My Samsung 40" HDTV

    So I ordered the brand new 15" i7 Macbook Pro along with the Apple wireless magic mouse and wireless keyboard after having bought my HDTV (went on a bit of a spree) with the intention of using the TV as a monitor for couch surfing. But, upon hooking up the adapter to the TV, my macbook's screen flickered between that blue transitionary screen and it's desktop screen. It did this for a few minutes. I jiggled the cable thinking that there was a loose connection somewhere as that was the problem with my previous mini DVI to VGA adapter from Apple. I did a little research and it turns out that they released a firmware update in 2009 for such a problem. I downloaded the update and attempted to install it but it did not determine that there was even an adapter connected. So, I proceeded to call Apple, they man was very calming to talk to and make all of my problems seem to melt away, but there were no solutions reached. He thought that maybe my TV either had a problem or was incompatible with the adapter (incompatible with a VGA connection? can you get any more analoge that that?). So, here I am, the adapter seems not to have a problem with regular monitors but I am still experiencing intermittent disconnects from my TV. I still, superstitiously jiggle the connection whenever I have dropouts but that really doesn't seem to be the issue here (or at least I hope not because that could mean port issues with my new laptop). Any suggestions? I noticed, after changing some settings on my TV, in an attempt to remedy this, that the TV was displaying the picture funny, I turned the TV off and then on again and it fixed the problem. That being said, perhaps I just need to turn my TV completely off when I'm not using it, as I have been just letting it go into standby. Maybe it needs a restart every so often much like my computer. I don't currently have data to support that theory as I just recently tried turning it off, but, since then have not had dropouts.

    You may have the screen refresh rate set higher than the TV is generally able to track reliably. It may be able to get there most times, but occasionally loses sync because it is out of its nominal range.
    I suggest you sit down with the manual for the TV and find out what resolutions at what refresh rates it intends to support through VGA, and make sure your screen settings are near (or below) those limits.

  • I cracked my screen. I want to use other monitor which I had one. I bought Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

    I cracked my screen. I want to use other monitor which I had one. I bought an Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

    You have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the monitor. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the monitor and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the monitor your Menu Bar will automatically change back to the MacBook.

  • Cam I use Asus mini display to VGA adapter on mac with thunderbolt port

    I don't have a apple mini display to vga adapter, but my friend have a Asus branded with similar design like apple, I have a presentation two days more, so I need answer quick!!!
    My mac: 2012 mid 15 inch

    I mean the Mini Display to VGA as in this website:
    http://www.asus.com/support/FAQ/1002131/

  • I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

    I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

    Hall Palm Desert,
    if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro.

  • Can the Mini DisplayPort to VGA Adapter for a 2011 Mac Mini be used with Windows 7?

    This question concerns the Mini DisplayPort to VGA Adapter described at the below link:
    http://store.apple.com/us/product/MB572Z/A
    When running Windows 7 via Boot Camp on a 2011 Mac Mini, can the above adapter be used with a VGA monitor?

    Thank you for the confirmation, Mr. Peck.

  • Problem with Mini DisplyPort to VGA adapter

    I recently got a new Mac Pro quad core and hooked it up to my existing Cinema Display (primary) and Sony VGA monitor (secondary). The cinema display is connected to the DVI port and the Sony is connected to the mini displayport with a mini displayport to VGA adapter.
    It all works great until the computer goes to sleep. When I wake it from sleep the cinema display is fine, but the second monitor won't come back up unless I unplug it from the mini displayport and reconnect.
    Any ideas how I can fix this?

    You are using an ACTIVE (powered conversion from Mini DisplayPort, and are having trouble with it.
    Your card generates VGA directly, at the proper Voltage levels, and it may be more reliable that the method you are using now.
    The VGA signals are on the bar at the end and one pin from the top row of the grid. I suggest you buy a DVI-to-VGA adapter and use it instead of the converter you are using now.

  • Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

    Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

    It's a VGA adapter. Nothing special about that. If your Samsung monitor supports VGA then it will work.
    But why not go completely digital and use a Mini DisplayPort to HDMI adapter to skip the analog conversion? It also supports passing audio over HDMI.
    About Mini DisplayPort to HDMI adapters

  • HT3382 With a MacbookAir (mid-2012) using a mini DisplayPort to VGA adapter plugged into the Thunderbolt port, can you configure the external monitor to FULLY display in portrait mode yet keep the built-in display in landscape mode?

    With an 11"-inch Macbook Air (mid-2012) using a mini DisplayPort-to-VGA adapter plugged into the Thunderbolt port:
    Can you configure an extended desktop with an external monitor (20") displaying full portrait mode (1200 x 1600 resolution) and keep the built-in display in landscape?
    I'd like to see something like
    External monitor / Built-in display

    Yes, I can't see why not.
    Just give it a try and report back if you have a problem.

  • HT3492 What do I need to do to use the iMac as a monitor from my HP laptop? I have my HP connected to the Mini DisplayPort to VGA adapter which is plugged into a Thunderbolt port.

    What do I need to do to use the iMac as a monitor form my HP laptop?  I have my laptop connected to the Mini DisplayPort to VGA adapter which is plugged into a Thunderbolt port.

    vga may not be a compatible port
    https://discussions.apple.com/thread/2246912?start=0&tstart=0
    more hits
    https://www.google.dk/search?source=ig&hl=da&rlz=1G1TSEH_ENDK367&q=use+imac+as+m onitor+for+pc&oq=use+imac+as+mon&gs_l=igoogle.3.0.0l10.2417776.2420497.0.2421354 .15.11.0.2.2.0.316.1723.0j4j3j1.8.0...0.0...1ac.-OkFwmTKBg0

Maybe you are looking for

  • New Desktop, from A to Z

    I'm fairly familiar with Linux, but am more accustomed to distros that come with a fancy GUI that has front ends for everything. So what I want to know, is how to install a good smoothe, easy to control and fairly simple to config LIGHT WEIGHT GUI. I

  • How to Call Smartform from User defined Transaction

    Hi All, my requirement is users enters the  data in the module pool program and clicks on the save and generate smartform button and the data is updates the database tables and  updated data should be printed on smartform Can anyone Please tell me Ho

  • TS1717 Itunes has been "processing file" of my down load of Badlands for 8 hours

    Itunes has been "processing file" of my down load of Badlands for 8 hours. What is going on?

  • Error with downloading

    I attempted to download adobe flash player and i am getting an error during downlaod. I may have uninstalled aobe player from my computer so how can i get that back on my computer

  • Cs3 Illustrator filters and effects read ERROR

    Hi, I recently had my logic drive replaced on my MacBook Pro. Now my Adobe Photoshop and Illustrator for CS3 give me an error every time I try using certain filters or effects. The error reads "The end of data was reached while from reading from a co