IMac 2007 Rebooting to Grey and Red Apple Logo
Hello
Can anyone help?
My iMac 2007 Intel Mac is rebooting over and over to a red and grey apple logo, I am running Lion the iMac has been fine recently, I came into the living room and it was rebooting with the following screens, bizarre as it is red and grey.
Does anyone have any ideas what could be causing it?
Many Thanks
Shaun
H
Your machine is getting Kernel Panics. KP's can be caused by either hardware or software, in your case my best guess is a failed HD. I would recommend closely studying the X Lab's Kernel Panics article to begin troubleshooting it. However you may save a lot of time if you simply took it into your local Apple Store or AASP to have it professionally diagnosed. If you do make sure you make an appointment at the Genius bar for the fastest service.
Similar Messages
-
I just opened my imac, i got the grey screen without apple logo, I just opened my imac, i got the grey screen without apple logo
I am curious as to why you repeated your question twice both in the subject box and in the discussion box?
In answer to your question, have you tried using
Disk Utility?
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Then, if you can, reboot to your internal drive and repair permissions. -
Need Help For iMac G5 Stuck On Grey Screen Or Apple Logo No Spinning Gear!
Hello everyone i'm new here and i'm new for using iMac for some reason i was trying to clean or to fresh installation the iMac that my brother gave it to me that he bought it into the flea market without the original disk on it! when i erase the Macintosh HD and some of the partition o iMac then reboot it now the iMac stuck on grey screen or apple logo no spinning wheel shown. and i also try to search and try all the tips of all mac user's like all the command key's and follow the instruction of them but still nothing happen..
Holding CMD & R just to go disk utilities nothing shown up only apple logo and the noisy fan.
Holding alt and it go to blue screen and show my mouse Pointer Refresh Logo, Hard drive Icon, Arrow Sign.
i can click Arrow Sign and it go Apple Logo and within 2-3 seconds and it change to Power Sign Logo,
i can click Refresh Logo but nothing happen .
i can't click the Hard Drive icon.
CMD, Option, P & R to Reset i also try and it's the same nothing change.
CMD, Option, ESC no action shown.
Is there anyway to fix this issue or problem please and thank you for help.
Hoping to get result for all of you guys P.S
iMac G5
v10.5.8
LeopardYou need to have the install DVD that was issued with the iMac
You can call Apple at 1-800-275-2273 -
IMac gets stuck at grey screen with Apple logo and spinning gear
I have tried everything listed at http://support.apple.com/kb/TS2570 with no avail. Also, I have tried fsck from SUM, nothing. It will not boot to the CD either, even with the Hard Drive pulled from the machiene. Any ideas?
MrTuRtLe03 wrote:
I have tried everything listed at http://support.apple.com/kb/TS2570 with no avail. Also, I have tried fsck from SUM, nothing. It will not boot to the CD either, even with the Hard Drive pulled from the machiene. Any ideas?
The last step is to take it in for service at your local Apple Store or AASP, are you saying you did that and nothign occured?????????????????
Additional Information
If the issue persists after you follow the above steps, you may wish to make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance. -
iMac froze while surfing web last night (color pinwheel), I forced quit and now when rebooting the fan and chime come on, the monitor stays on grey and the apple sign is replaced by a stop sign and I can't get past this, is there self fix? Never backed up.
The computer (top / back of monitor) gets really hot within minutes.How old is the iMac?
With no backup, you have probably lost all your data.
Sounds like serious hardware problem for which you are going to have to take it to Apple for an estimate of repairs.
Allan -
I have snow leopard installed as an OS. When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol. What can I do?
Maybe this might help.
http://support.apple.com/kb/TS2570 -
Hi my iMAc 27 inch starts up to the grey screen with apple logo and loading bar underneath it loads halfway then freezes up and shut down after a while please help
Try the tips listed here Mac OS X: Gray screen appears during startup - Apple Support
-
My iMac wont go past the grey screen with Apple Logo and question mark a caution mark
My iMac wont go past the grey screen with Apple Logo and question mark a caution mark
You may find this support article helpful:
http://support.apple.com/kb/TS2570
Ciao. -
My macbook pro 2011 shows grey screen with apple logo and want start
i was just using my macbook pro and it freezed for a while not responding and i turned it off by pressing the power button. afterwards, i turn it on and it shows a grey screen with apple logo but want start pls somebody help me because am having "my life" on the machine
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
Imac will not boot up, chimes with apple logo and beach ball spin??
imac will not boot up, chimes with apple logo and beach ball spin?? after installing adobe flash and up graded apple softeware
If your iMac came with or is running Lion, startup holding either the Command-R keys or the Option key and select the recovery partition and then use Disk Utility to repair the Macintosh HD.
see > OS X Lion: About Lion Recovery
If your running Snow Leopard or earlier OS X, pop in your Install DVD and startup holding either the Option or C key, then open and use Disk Utility to repair the Macintosh HD.
see > Mac OS X - Using Disk Utility to Repair a Disk -
My IMac is frozen with the screen white ,apple logo appears and a spinning wheel under it. A long empty rectangle empty appears under the wheel and is empty.
Your iMac is trying to go into safe. This usually happens when it has detected an issue with the OS or file system.
Follow the steps outlined in http://support.apple.com/kb/TS2570 -
When start IMac screen is white with no spiral and no apple logo
Why is my Snow Leopard OSX 10.6.8 IMac screen all white when I turn it on? There is no spiral and no Apple logo and the desktop does not appear. The screen is just white.
Prior to this, we had a wind storm in our area with some power glitches today. After one of them, the dock items disappeared and just the wallpaper was there. The colored spinner began going around when I clicked on the mouse but nothing was happening. I unplugged it to try to reset it, but now the screen comes up all white, there's no apple logo that appears at start up and that's it. Now what should I do?Hello kathy15945,
The article linked below details a number of troubleshooting steps that can help restore your Mac's ability to successfully boot.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/TS2570
Cheers,
Allen -
Hello all,
I have a iMac, iPhone 4s, iPhone 4 and an Apple TV v3...and I would like to be able to stream the same song to all of these devices all at the same time. Is this possible do you know?
any details greatly Rx'dWelcome to the Apple Community.
Thats not possible I'm afraid, only the Apple TV can receive an AirPlay stream, and even then only one at a time, unless you stream from a computer. -
I have an imac running OS10.6.8 and an Apple laserwriter 16/600PS. Is it possible to connect these directly without networking? Where can I find the printer driver?
It turned out that WD is the big bad guy in this game.
According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
On the other hand, with WD GP 1Tb there is no problems at all for ages.
thanks guys, thread is closed -
Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Maybe you are looking for
-
How do i connect my macbook pro mid 2009 running maverick to my apple tv?
someone please help me!
-
My Macbook is not acting right it has gotten very sluggish online and has made a really loud buzz or screaching sound twice in the last month. The first time I was just on the internet and it wouldn't quit making the loud noise until I turned it of
-
Acrobat Pro 10.1.1 network issue
Hi everyone, Im having an issue with Acrobat Pro X. About two weeks ago we did a server migration. Since then everyone (about 60 people) have been running into a performance issue with Acrobat X. Everyone uses Word 2007 and the office plugin to creat
-
Mandatory field for TIN No, or Contact Person
HI Expert, Can anyone please tell me code for Mandatory field for TIN number or Contact person at the time of adding Purchase Order.its possible by SP i tried for it but its variable so pls anyone have any idea. Sudhir
-
How do I delete old open windows. Before the upgrade, I held an icon til it wiggles, then touched the x to delete.