Imac 21,5 2011 hdd for ssd replacement

Is it possible to replace hdd drive in mid 2011 Imac 21,5 for an ssd drive. i dont need dual kits etc, just need to take hdd and istall in the same place ssd for faster Mac.

As for the thermal sensor, just reattach it to the SSD so that your fans won't go into warp speed.
Impossible for 2011 iMacs:
note that the HD bay has a different power connection with seven total leads, two of which are used for thermal feedback. Normal SATA power connections, including those going to the SSD and optical bay in the 2011 iMacs, utilize five total leads
Further Explained: Apple’s iMac 2011 Model Hard Drive ‘Restrictions’

Similar Messages

Changing HDD for SSD QUESTION (U410)

Is any data held on the 500GB drive at time of reset?
Basically my question is, can I simply swap the 500gb HDD for a 250gb SSD without problems of so when I reset the Windows8 install etc will work as usual?
I will use the one click recovery button, and reset everything, except this time on the 250gb SSD.
HELP?

hi shoutingdog,
Welcome to Lenovo Community Forums!
First Before you change any setting or setup,
Create a backupdrive first of your WIndows 8 using this Method and let's Name that as your Repair Image.
Download and install belarc advisor to get the product key.
The HDD will have everything, your Windows 8 Os and even the Onekey Recovery Partition, so removing your HDD will render the One click recovery button Not working.
Two ways to install windows 8 back to the blank SSD.
1 You will need an external mount for your SSD or HDD where the scenario should be both SSD and HDD are connected to the computer so you can clone the HDD to your SSD.
(If the clone failed then you can use the Repair Image)
2 You can use a retail copy or any installer copy of Windows 8 and install that to your SSD, if asked for a product key, use the Key extracted using the Belarc advisor.
Any driver needs you can download from Support.lenovo.com
Again The Preloaded HDD Contains the Recovery partition, and the One click feature will look for the HDD where it is saved.
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

IMac 27 Mid 2011 - HDD problems

Hi! I have some problems with HDD (1 Tb Seagate) on my iMac 27.
- The temperature is so high. 58-60 C with fan 3500, but only Photoshop is running with 40Mb file, thats all.
- Noize and vibration on any surfaceces.
I checked "Mac 1TB Seagate Hard Drive Replacement Program" and my iMac eligabible for that program.
I live in Ukraine. We don't have Apple Store, just Apple Authorized Service Provider. If my HDD is defective can they replace itunder warranty?

Seagate states that operating temperature for that hard drive is up to 69 Celzius deegrees. See here http://www.seagate.com/staticfiles/support/disc/manuals/desktop/Barracuda%207200 .12/100529369b.pdf.
But I have doubts about HDD temperatures and longevity and would recommend investing in buying iStatsMenus and keeping an eye on HDD temp (put it in top bar).
Whenever I notice HDD going over 45 or 50 I turn on fans to higher speeds (iStatsMenus has built in rules but you can add your own too). After few minutes everything cools down.

Satellite S50T-B - Adding RAM and swapping HDD for SSD

HI there,
I have recently purchased the Satelitte S50t-B laptop and have a few question about upgrading:
1. What is the recommended RAM to add (8GB)
2. What is the recommended SSD to add?
3. Are there any instructions to add RAM and an SSD to my laptop?
4. Will I void my warranty by installing more RAM and swapping the current hard drive for an SSD?
Thank you for your help

This notebook is listed on Toshiba page:
http://www.mytoshiba.com.au/products/computers/satellite/s50/pspq8a-008008/specifications
- What is the recommended RAM to add (8GB)
The unit supports 16GB RAM, so you can add an second PC3-12800 8GB DDR3L (1600Mhz) SO-DIMM module (i.e PA5104U-1M8G)
- 2. What is the recommended SSD to add?
Its up to you there are different SSD drive on the market and most of the 2.5 SATA SSD drives should be compatible.
- 3. Are there any instructions to add RAM and an SSD to my laptop?
It looks like both parts (RAM as well as SSD/HDD) are not user upgradable since there is no separate access to the memory or HDD bay. This means that whole plastic cover at the bottom of the unit needs to be remove in order to get access to these part.
But as far as I know this would cancel the device warranty!!!
- 4. Will I void my warranty by installing more RAM and swapping the current hard drive for an SSD?
If you want to keep the warranty valid, such upgrade should be performed by authorized engineer.

Swapping HDD for SSD

I'm thinking about buying a 17" MacBook Pro and am having difficulty deciding between a 320GB 7,200 RPM drive or the 128 GB SSD. I don't really know if the 128 GB SSD will make huge amounts of difference for the cost, so I'm wondering if it's possible to buy the 320 GB for now and then upgrade later. Would this be easy to do or would there be different connectors involved?
Apologies if this has been asked before -- I couldn't find an answer.

Hi.
It appears that Apple authorizes memory and hard drive swap on unibody MacBook Pros and the procedure seems very easy (it was not so for previous MacBook Pro, or iBooks).
You can find it on the MacBook Pro support page.
Physically, SSDs are the same as standard hard disks. So as long as you choose a 2.5" SATA SSD (with the correct height, but I believe that they all are 9.5mm high, which is the standard for notebook HDDs), you will be OK.
So go ahead with the standard HDD and upgrade to a SSD when you want.
At this time, you will be able to copy the content of your old drive to the new one (as long as it fits ...) by placing it in a USB enclosure, using a free program called Carbon Copy Cloner. You will need another drive (or another Mac) as startup disk.
H
Hops this helps,
Jérôme.

Purchased Y510P - Need to swap HDD for SSD, Windows 8 Install

Hi everyone,
I've just ordered a Y510P which is on its way to me. I love the specs, except I want a decent sized SSD in it instead of the 1tb HDD.
I'd like to know how I can perform a clean install of Windows 8 on the SSD, and utilize the product key assigned to the system. The large majority of win8 laptops I've worked with do not include a product key sticker anymore, and I do not want to utilize whatever recovery tool lenovo has, as the recovery tools tend to include additional software I'm not interested in having on the laptop.
Can someone point me in the direction of the best way to accomplish a clean install on a replacement drive and still be able to utilize the windows 8 key assigned to the PC?
Thanks in advance.

xlim3y:
You could first extract your OEM product key (search Belarc Advisor) and then follow the instructions at the link below to download the .iso (Windows 8 or 8.1). Read the comments following the article as you may need to use a temporary placeholder key to commplete the install and would then activate Windows with your extracted product key. (http://www.neowin.net/news/here-is-how-to-get-the-windows-81-iso-and-create-a-usb-install-stick)
-PFM

Replaced HDD w/ SSD, replaced Sata Cable, can't install OSX

Hello All,
So I've got a Late 2009 13in MBP that I thought had a HDD go bad. Nothing unusual, so I replaced the HDD, had a second one "go bad." After a bit of trouble shooting, I ordered a new Sata cable and a a 512gb Crucial M4 SSD. Replaced both, and I've been having some trouble ever since.
I've tried to install 10.6, 10.7, and 10.8, and every single attempt has failed in it's own way. 10.8 refuses to create a recovery partition, 10.7 just hangs on first reboot after copying files and never reboots to finish the installation, 10.6 makes it half way and refuses to copy Essentials.pkg.
I did a test and used Carbon Copy Cloner to clone my other macbook pro (10.8) to the HDD with the 13in in Target Disk Mode, and it failed at first boot but after reparing disk permissions a few times I got it to boot just fine.
I'm left with two options. Either the new Sata cable is also fried, or the logic board is fried. The macbook has passed both Apple hardware test and TechTool Pro's hardware test. But no matter what, I can't get an OS installed on it the traditional way.
Just wondering if anyone here can shed some light on some possible solutions... this post is more of a last resort as I'm all out of ideas.
Thanks!

Could be the SSD.

What is the easiest way to tell if your time capsule has backed up your hard drive, as my mac has been recalled for a replacement hard drive

Your views would be appreciatted, my imac has recently been recalled for a replacement hard drive, would it be easier just to purchase a external hard drive to be on the safe side for backing up my photos etc?
I have a 1GB time capsule but to be honest not sure how it operates it states it oldest back up is the 11th October
201GB of 998 available or would it best to buy a external hard drive and back up using this.
thanks
Benjoe08

You are very wise.. !!
It can be awfully hard restoring the Mac from TM.. as many posters here have discovered.
IMHO.. for certainty.. get an external drive.. they are not expensive.. do a full backup to it.
I would even download superduper and make a clone of the existing drive and boot from it.. this means when the Mac is returned if all else fails.. you can use the external clone as a boot and have exact OS as you have right now.

Will the new 2012 iMac support 2 hard drives (HDD and SSD) like the 2011 iMac?

Will the new 2012 iMac support 2 hard drives (HDD and SSD) like the 2011 iMac?

Well, I'm not sure how anything can fit into a 5 mm depth, so I can see why they've removed the CD drive - there probably wouldn't be enough room for the laser, LOL. Can't imagine speakers, hard drive (of any flavor), logic board and so on and so forth. Fortunately, my iMac has Applecare through early 2015 so I'm set for a while; I may check out a Mini at that point - saw that it is configurable with a fusion drive, which would make it interesting for me.

IMac 2011 + Intel 510 SSD Performance

Yesterday I installed Intel`s SSD 510 (120GB) in my iMac 2011 27 inch (along with a 2TB WD Caviar black)
Today I did some testing and the results are somehow disappointing.
It would be great if other owners of Intel`s 510 can post some benchmark results! Here is mine:
Tested with AJA:
Write: 131,3
Read: 174,4
720x486 8-bit and 128mb file size
The 510 in system profiler:
Finally: xbench
The results should be WAY higher!?
Does anybody have a hint what I did wrong?

How did you manage to get the SSD and the 2TB drive in your new Imac? OWC said you couldn't update those internal parts. I am too looking to get an Imac 27" but I want to add my own SSD and 2TB drive similar to what you did. did you buy the imac with this set up already from apple? do you have to get the SSD/Harddrive combo from apple to have the parts needed for the replacement? thanks in advance.

Attempting to reinstall Adobe Photoshop Elements on iMac with OS 10.7.5 after replacement of the HDD

Attempting to reinstall Adobe Photoshop Elements on iMac with OS 10.7.5 after replacement of the HDD under iMac 1TB Seagate Hard Drive Replacement Program.
Would appreciate any help navigating the installation failure message. THANKS!

Thanks for your response! Here's the error message -
"The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."

What is the biggest bottleneck on this machine - CPU, GPU, RAM (now at 8GB), or the HD, and would I be better getting a current 27" iMac, a 2012 Mac Mini, or SSDs for my current Mini?

I currently have a 2011 Mac Mini Server. When using FCP X, what is the biggest bottleneck on this machine - CPU, GPU, RAM (now at 8GB), or the HD, and would I be better getting a current 27" iMac, a 2012 Mac Mini, or SSDs for my current Mini?
Thanks people,
TZ

Hi Tom,
I just wanted to ask you about what you said about the color correction. To be quite honest I'm not sure what the best workflow is, and I haven't gotten my feet wet in multi-cam editing. Basically my work-flow has been.
1) Import from the camera as optimized media - I found that adding color-correction at the import stage cause a severe hang with my tape-based Canon unit.
2) Color-correct the imported files before loading any files into a project
3) Drag files onto the timeline
4) Click on the color-correction box
5) Start editing - Usually I have one camera zoomed a little tighter on the singer, one on the whole band, and my iPad or iPhone camera at different angles so I start cutting things according to who is the focus of the moment, add a Ken Burns effect every here and there, Titles, an occassional transition effect.
6) Add music effects after the looks are taken care of
7) Export
Are you recommending clicking on the color-correction box after everything is done?
Thanks - TZ

HP ENVY 17T - J100 I NED TO REPLACE THE MAIN HDD TO SSD

I was just wanting to confirm that with the HP ENVY 17T J100 model can upgrade it's HDD to SSD? This model has the 1TB HDD. If I simply clone the HDD to an SSD of the same size. will it work? Or is there more complex setup to get the raid working between SSD/SSD rather than SSD/HDD?
also i try with 120 ssd and it didnt work. if i change the main 1 TB HDD to 1 tb SSd can i use the recovery disks to return all the windows as factory with the SSD or not and why if not
Thanks for your time!

Hi @sherifmadkour
I understand you are looking at replacing your HDDs in your notebook with SSDs. I can help you with your question.
Please see the following for your notebook family which shows the supported components.
HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP ENVY TouchSmart 17 Notebook PC Maintenan...
You can find the drive list in the product description section, and also under the Hard Drive list, in Component replacement procedures.
Anything outside of that list would not have been tested with the other hardware, and so is unexplored territory. It is one of those things where if a device has different current requirements, it can put strain on the other hardware or an issue of driver compatibility.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

[MBP - 2008, 4,1] Best way to replace HDD with SSD

Looking to upgrade my 2008 Macbook pro with a new SDD.
What is the best way to install a SDD while still saving the data from my HDD? I've heard it's possible to clone the hard drive, place the info on the SDD, and then boot with it. I've tried my best googling it, but I can't seem to figure out how I would connect my SSD to my computer while the HDD is still installed? I don't have an external drive with SATA connections.
If I do have to do a clean boot with the SDD (After saving important documents on an external drive), would I need my OSX disks? It's been a long 4 years with this computer and don't think there is any chance of recovering the OSX boot disks. Is there a way to download these necessary to do a clean boot?
Thanks for helping a misguided student trying to speed up his laptop!

You have two basic options. First is simply replace the HDD with the SSD. Second is to remove the optical drive, move the HDD to the space where the optical drive was (you need a mounting kit for this) and install the SSD where the HDD was installed.
Visit OWC to see the various options they have that includes the special mounting kit, SSD, and installation tutorials.
If you go with the first option then you will need an external notebook drive enclosure in which to put the HDD when you replace it with the SSD.
As for cloning that is done as follows:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Be sure you prep the SSD properly:
Drive Preparation
1. Boot from your old HDD. Open Disk Utility in your Utilities folder.
2. After DU loads select your SSD (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
I would also recommend upgrading your OS to Snow Leopard. You will need at least 1 GB of installed RAM for Snow Leopard.

Installing OS on a new HDD for imac with no installed HDD

Hi all
I am looking to buy an iMac 27", but it doesnt come with a HDD
So I wanted to know if I buy a new HDD for it, can I install Mavericks onto it and fit it to the iMac? How would I go about doing this?
I dont have access to another mac but I do have access to a windows machine. Can I do it from there?
Any help appreciated
Thanks

Where are you buying an iMac 27-inch, Late 2009 model that has no internal hard disk drive?
Having to assume it was removed by an original owner, does the computer work? Was it tested by use of an externally enclosed HDD with a correct bootable system installed?
There are various repair and upgrade guides online, several topics among them and several are free to view or use. There likely is an iFixit guide that may cover that vintage of iMac 27-inch build year model.
Not sure which iMac 27-inch model guide applies to your computer,
some appear here http://www.ifixit.com/Device/iMac_Intel
While considering the hard disk drive, be sure that if there are any sensors or special cables required to be in place and attached to a new replacement, they are in place and working; some users of later models found when a hard disk drive was replaced, their fans ran at high and uncontrolled speeds due to lack of sensor input. The default situation was for the computer act as though the unit was overheated. And third party fan control software to set a fan at low slower speeds does not take into account faster speeds are needed to cool iMacs. Yours may not exhibit this issue, but I am not certain either way.
When you get it set up, with HDD and original Snow Leopard installed & updated to 10.6.8, be sure to check to see if there are any hardware or firmware updates. I see there was one listed for your model and it may already be installed...
•27-inch iMac EFI FW Update 1.0:
http://support.apple.com/kb/DL1031
Hopefully this helps...
Good luck & happy computing!

Imac 21,5 2011 hdd for ssd replacement

Similar Messages

Maybe you are looking for