IMac 21.5, which one ?

Hi guys, I'm going to buy my first iMac after several years as a Windows user. I was thinking to get the 21.5 model (the 27 is too big for me) but I was a little bit confused about the integrated video adapter (Nvidia 9400M) which seems to be an entry level device.
In these years I've been using my PC mainly for photoshop retouching, video editing and little gaming.
Which 21.5 model do I need for my purposes ?
The base one or the ATI one ?
Many thanks !!

Welcome to Apple Discussions,
If you are doing 3D gaming get the best graphics card you can. Any type of 3D graphics and video editing is taxing on a video card. I would recommend getting the model with the ATI Radeon HD 4670 graphics with 256MB.
Regards,
Roger

Similar Messages

  • Upgrading from macbook white to imac...which one?

    Im looking to upgrade from my macbook white (nearly 2 and a half years old now) to a new imac.
    Spec: 2.1 ghz intel core duo, 4gb ram, 120 gb hard drive, 500gb external seagate HD, 160gb external seagate HD
    I am running logic 8 and use AU's such as all the native instruments ones, Rob Papen synths and Spectrasonics instruments a lot (normally running at least 10 instances of each in a project). Everything i do is software based and i am not currently running an external audio interface but i will probably get one to connect my mackies and my decks.
    My macbook is now struggling to keep up with it all and regularly cuts out while playing which gets very frustrating, therefore i feel it is time to upgrade.
    I dont have much money and am looking at buying the basic imac available on the apple site. Would the step up from 2.1ghz dual core to 3.06 ghz i3 processor be significant and very noticable i.e. would it stop logic cutting out while playing? or is it actually worth going for a quad core even though the i3 processor can run 4 threads at once?
    Also, is it worth going all out on 8gb of ram or would it not be worth it if i wasnt running a much more powerful processor?
    Any issues with the hard drive, graphics cards etc?
    Obviously a new imac will have a significantly improved performance to a 2 and half year old basic macbook white but i just need to know if it is worth spending a lot more money on a more top spec imac since i cannot afford to be upgrading very often.
    Matt

    Even the lowest end base model iMac would be a pretty significant jump from what you have now. The amount of RAM would be the same, but the RAM in your laptop is almost certainly DDR2, while the new system would be DDR3-1333, and the Core i3 has an integrated memory controller which further reduces memory latency. Add to that hyperthreading, and I believe even Turbo Boost, it will make for a very nice step up.
    What I would suggest doing, is trying things out with 4GB of RAM and see how it goes for say a month. If after some sufficient period of time, like a month or at least a couple weeks, you need more RAM, it's a lot cheaper to add it aftermarket. Any DDR3-1333 (Non-ECC) SO-DIMM should work. All you need is a Philips #2 screwdriver to remove a couple (captive) screws on the panel on the bottom edge of the system. There are 4 memory banks there you can fill. I want to think the current iMacs can take up to 32GB of RAM in a 4x8GB config.
    You might want to consider scraping together just a little extra money for the i5 model however. Long term, it's going to provide better performance. Four physical cores will trump two hyperthreaded cores pretty much any day of the week. There's nothing wrong with the i3, it'll be a big improvement over what you have. However, given what you say you do with your system, the i5 is going to be a significantly better choice if you can find the money.

  • Need early 2006 iMac installation disks, which ones?

    I need to know which SPECIFIC installation disks came with or are usable on a 2006 iMac. I wiped the computer before knowing my MacBook OS X Tiger disks wouldn't work on the iMac. So I either need to purchase new disks as the computer I inherited did not come with the disks or can anyone help me figure out how to get the OS back on the computer?

    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource:  International Support Phone #s.

  • I want to purchase a two terabyte external hard drive to utilise Time Machine on my new iMac....but which one? Western Digital, Time Capsule, Seagate? Any advice would be most welcome please.

    I want to purchase a two terabyte external hard drive to utilise Time Machine on my new iMac....but which one? Western Digital, Time Capsule, Seagate? Any advice would be most welcome please. Thanks Phil

    If you are looking for high quality drives and enclosures I'd recommend these 3:
    http://g-technology.com/products/g-drive.cfm
    http://www.lacie.com/us/products/product.htm?id=10330
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    I use the LaCie's, I've got three connected to my system and a 4th acting as my TM drive on my MacBook Air. Any of the above would be welcome on my desk though.

  • Am new to imac; need flashplayer to view some websites.  Which one is safe to download?

    am new to imac - need a flashplayer to view some websites.  which one should I use and is it safe to download?
    does apple have similar program to use and would sites accept it?

    Hi,
    Here's a Link for Flash Player...
    http://www.adobe.com/software/flash/about/
    Cheers,  

  • Updates for Final Cut Studio, Quicktime, and OS X on new iMac?  Which ones?

    Hello All,
    Okay, so I have been searching through the forums about updates for all the software updates, and which ones work and which ones don't. The Tiger vs. Leopard battle. The ones that have had no problems doing all the updates and the ones who are suffering terribly. But it is really hard to pinpoint everything since it is all spread out over so many different pages. So I am hoping that this question will be of benefit to others in my situation.
    So I have a new iMac Alu 24" 2.4 ghz, and 4 gig of RAM. I did software update for everything except the OS and not for Quicktime. So I am running OS X 10.4.10 and Quicktime 7.2
    I installed FCP Studio 2 without a hangup. I did not even bother to install Color because I knew that it would be more then this GPU could handle. I didn't bother with Live Type either. Don't use it at work and don't think it will be any different at home. So I intalled FCP 6, Compressor 3, Motion 3, Soundtrack 2, and DVD Studio 4. I have done no updates to any of the Studio programs. So I am looking for some opinions (more then one would be appreciated). What updates should I do and which ones should I avoid for my particular setup? I want to do this as right as I can the first time around.
    Again sorry, if this seems redundant, but I want to get everything together in one place to make sure that I don't miss something from split up forums. And hopefully this will help others. Sorry about the length.
    My Current Situation:
    Alu iMac 24" 2.4ghz, 4 gig of RAM
    OS X 10.4.10
    Quicktime 7.2
    Final Cut Pro 6.0
    Motion 3.0
    Compressor 3.0
    DVD Studio Pro 4.0
    Soundtrack Pro 2.0
    Which updates? If the almighty Shane Ross would like to step in, please feel free to. Thanks folks for any and all help.

    UPDATE: Okay, so I gave my Final Cut a really simple run through last night. Just shot some footage on the HV20 and imported it and did the Apple recommend workflow for the reverse telecine. (I know, I know, doing the full out reverse telecine to get it to 24p is unnecessary if I am just going back to video, but I just wanted to give it whirl) Anyways it worked, and it came out great. So I dropped into a 24p timeline and through it together, and no software malfunctions. No complaints. During log and capture, there was a lag between my player and the computer, but the footage after capture was right on targert (I am referring to audio sync).
    So as long as it works, I am happy. Besides, I don't plan on using on board audio too much since there are no XLR inputs unless I get a Beachtek. Different story, sorry.
    So currently, with absolutely no Studio updates, OS X 10.4.10, and QT 7.2, on a brand new iMac, 2.4ghz, 24", everything is as it should be. I'll keep checking back in to see if anyone recommends an update for me or if I encounter problems and what caused them.
    -Albert
    Message was edited by: JayEnder

  • Is Which one is safer MacX DVD Ripper Pro or Handbrake to rip personal DVD movie and other movies on iMac Yosemite?

    Is Which one is safer MacX DVD Ripper Pro or Handbrake to rip personal DVD movie and other movies on iMac Yosemite?

    You've already asked this question. Please confine your responses to the original topic so answers aren't getting spread out.

  • Watch HULU on HDTV - iMac or MacBook Pro? Which one should I use?

    I have this dilemma which computer would perform better on streaming video from the net. I wanna drop the cable company so I have been looking to buy a converter to HDMI with AUDIO included like this: http://www.brilliantstore.com/hdmicables_dekcell_cpa1454.html
    or like this:
    http://www.kanexlive.com/products/item.aspx?id=3495
    but can't make up my mind if I should use the iMac or BMP and they have different video output (Mini-DVI/Mini Display Port). So I could use some feedback on which one you think would handle the project better (speed, resolution... etc.) or if it's make any difference at all, for specs please look below.
    Thank you!

    The Imac and you don't need any converter.

  • Just bought an iMac. I want to be able to "remote in" to work. I've been told to download software from Microsoft site but can see there are several versions available. Can anybody advise which one I need. Thanks

    Just bought an iMac. I want to be able to "remote in" to work. I've been told to download software from Microsoft site but can see there are several versions available. Can anybody advise which one I need. Thanks

    You mean Microsoft Remote Desktop Connection Client for Mac

  • I am a photographer looking to purchase a new iMac.  Which one should I buy and what should I include in the package?, I am a photographer looking to purchase a new iMac.  Which one should I buy and what should I include in the package?

    I am a photographer looking to purchase a new iMac.  Which one should I buy and what should I include in the package?, I am a photographer looking to purchase a new iMac.  Which one should I buy and what should I include in the package?

    In general most macs you buy are the same. If you will be doing quite a lot of editing of photos and videos, then the big things to look for are:
    Processor - 2.8ish GHz Intel i7 4-core - is about the best I have head of thus far.
    RAM - fairly easy to upgrade yourself, but 16GB is typically more than you will need for the next 5 years at least.
    iLife is reasonably good software for editing media, but as a photographer, you may have your own prefered software
    The good thing about Apple is that they don't sell ****** computers in general. They offer little in the way of customization of hardware which is both their strength and weakness.

  • I have a Bootcamp partition on  my Imac with Mavericks which I can't delete because the Partition Layout is greyed out and is stuck on 'Current'. What can I do?

    I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout in Disk Utility is greyed out and is stuck on 'Current'. What can I do? I was trying to install Windows 8.1 but apparently, this is not yet possible.
    I was originally able to restore to my original Mac OSX partition using Boot Camp Assistant but then after entering Disk Utility and re-RAIDing the default RAID 1 to RAID 0 in the BootCamp partition (I suspect this is the cause of the problem but why was it defaulted to RAID 1 in the first place?!!!!), forever afterwards, I couldn't restore the single OSX partition.
    Whenever I used BootCamp Assistant my choice to 'Install or remove Windows 7 or later version' was greyed out. Finally I went to Disk Utility to repartition but the Macintosh HD and BootCamp disk partition functions were also greyed out (even if I started up from Recovery mode holding down option, command and 'R' and choosing Disk Utility). BootCamp Assistant gives the error message 'The startup disk cannot be partitioned or restored to a single partition' with additional small script 'The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows', and DU gives the error message 'The full size of the Fusion drive is not available for repartitioning'.
    What can I do to fix this problem? How can I make the Partition Layout button active in DU so I can change the partition to all OSX? I'm prepared to wipe off all my data etc to repartition and have backed up all to disk using Time Machine.

    My problem is fixed now, thank you. It was caused by my changing the Boot Camp partition's 'RAID1' to 'RAID0'. If I hadn't done that, Boot Camp would still have been able to 'restore' back to the one partition. It was fixed with the help of Applecare by using a terminal and typing a command to erase the IP of the Macintosh disk (not the volume) as well as the IP of the Bootcamp partition (if I remember correctly), but then I had to restore the OS and all my applications and data etc which I had previously backed up using Time Machine. I haven't taken note of the exact command terminology used. It would be wise to speak to Applecare about this if possible.
    Two words of warning, 1. According to the cause of this problem, it might be wise, after reinstalling the ops system to reinstall all extra applications one by one, manually, in case a similar problem arises again. Then manually copy back all data. Or the Mac user could use the Time Machine backup and then uninstall all the added apps then re-install them one by one manually. 2. Beware as after all this the user might not have the 'Recovery partition'. There is a small recovery partition (a few 100 Mb is size) which comes with all later Macs. After all this is done this tiny partition might not be there anymore and the user might have to re-install Mavericks again to get it back, or just install the upcoming update of Mavericks due in a month or so.

  • Looking for an app for a blue tooth, type I want to use on my Iphone is a "jawbone" Question is out of the many available in the store which one would be the best and most reliable?

    Looking for an app for blue tooth on my Iphone.  Out of the many in the app store which one(s) would be the best & most reliable?  Currently trying to set up for an older Jaw Bone?

    You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
    You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
    As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
    An Extreme's Guest network is separate from its Main network; that is the reason for having it.

  • Have a G400, OS10.4.11. Need 10.5 or later to install a new printer. Which one will run best? How do I upgrade?

    Have a G400, OS10.4.11. Need 10.5 or later to install a new printer.
    1) Which one will run best?
    2) How do I upgrade?

    It's probably cheaper to buy a new printer & sell the existing on on ebay.
    I have the Cannon pixma mg3120  works fine for me with mac os x 10.4.11.  I am able to refill the color ink jet cartridge.  Press reset + color copy button for 10 seconds.
    http://www.amazon.com/Canon-MG3120-Wireless-All-In-One-5289B019/dp/B005TI2Q8M
    Mac OS® X v10.4.11 to v10.6.x
    http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all _in_one_inkjet_printers/pixma_mg3120
    What is a G400?
    You may want to post machine info.
    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the word hardware.
    Leave out the serial number.
    Example:
    Machine Name: iMac
    Machine Model: PowerMac4,1
    CPU Type: PowerPC 750 (33.11)
    Number Of CPUs: 1
    CPU Speed: 600 MHz
    L2 Cache (per CPU): 256 KB
    Memory: 768 MB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.1.9f1

  • Switching to Mac - which one for me?

    I can't find a suitable place for this question, but my son is starting a job at a tv studio and wants a mac to get into video creation and editing. Which one should he get for this purpose? He has a pc, so he has keyboard, video and mouse. Thanks.
    pc right now   Windows XP  

    Hello and Welcome to Apple Discussions. 
    He should go for the Mac Pro. As a professional he'll appreciate the expandability in the coming months and years. iMacs are fantastic general purpose machines and ideal for home video editing but if you're doing it day-in, day-out the Mac Pro is the way to go. They don't cost a great deal more either:
    iMac
    24" LCD
    1x2.1.6GHz Merom
    1Gb RAM (3GB)
    250Gb HDD (750Gb)
    8x DVD±RW DL
    BT and Airport
    $1,999.00
    Mac Pro
    23" LCD (with then option to connect up to a 30" too)
    2x2.0GHz Xeon Woodcrest
    1Gb RAM (16Gb)
    250Gb HDD (3Tb)
    16x DVD±RW DL (x2 or Bluray in future)
    BT and Airport
    $3,278.00
    It's fair to say that's over a thousand dollars more but when you look at the specs and the room the Mac Pro allows for the future it's a much better bet.
    mrtotes

  • Extending a controller, but not sure which one to extend

    Hi Tech Gurus,
    I have a task ( validate a input field say Number) and my approach is to extend a controller and write my code in the ProcessFormRequest section.
    But i am unable to know which controller to extend ?
    My approach is - for the particular page i have to see the Personalize page and get the Document Name out of there. The About Page  will show all the controller involved with the particular input field Number.
    Then have to see that xml file in the JDev and then extend the controller.
    But my problem is when i look at About Page. i find multiple Number there and so cannot track which one is the one pointing my input field and thus cannot conclude which controller and view objects are associated with it.
    Hope the question is clear.
    Thanks in Advance.

    Pretty much any mac will work other than the Mac Minis and iBooks.
    FCS2 will work fine on any MBP, iMac, or Mac pro.
    Depending what your needs are I would get something that will let you grow as much as possible. This means a Mac Pro. I use a PowerMac G5 and a MacBook Pro.
    You can save money by purchasing Apple Refurbished from the online Apple store. These machines are like new, have the same warranty as new, but cost less.
    Best Regards,
    David Finell

Maybe you are looking for

  • HELP!!  Iphoto won't open, crashes immediately

    I have the exact same problem as described in the thread below. I am running 4.0.3 and it has worked fine for 3 years. I have not done any new imports and all of the sudden when I try to open the app it bounces, shows the Iphoto opening page while th

  • Multiple symbols for line graph in illustrator

    I can't figure out how to change the default square data points in a line graph.  When I try to got to Object>Graph>Marker it is greyed out.  When I click on a circle symbol and then try to go to Object>Graph>Design, it is greyed out.  I am so frustr

  • Problem in later adding forms in existing project...

    Later i've added three more forms in existing project. but pages are not created for those three forms... how to resolve this? Edited by: skud on Mar 7, 2011 4:11 AM

  • PHP Contact Form Problem

    Hi all, I'm trying to use a php Contact form and it's throwing up an error even before I click submit. As a newbie to PHP I don't really know where I am going wrong. Here's the link to the contact form. http://www.thesketchcollective.co.uk/clients/fo

  • Capturing keyboard input as written

    I would like to know if I can use Scanner class to make a program to read users input on the keyoard same way like talk or ytalk program on unix does? Meaning, I would like to read each character immediately and not wait for carriage return. Then I w