Imac 21" mid 2011 can not boot from USB device?

Hi,
hope someone can help me.
Bought the new imac 21" and replaced the superdrive with a ssd drive.
Works great but it seems that the imac is not able to boot from any usb device.
I put my osx install disk in my external dvd drive and powered my mac.
While booting up (pressing cmd) the mac does not recognize my external dvd drive. This works great with my MBP late 2008. But the imac can not boot from the dvd drive. Also pressing "c" while booting does not work. Doing that a grey screen appears and after some time mac boots from hdd.
So i installed mac os via target mode over firewire withbmy old imac. This works.
But now i want to install windows on a bootcamp partition.
I can't boot from the windows 7 professional dvd, too. So i tried to create a bootable win 7 thumbdrive. Mac can't boot from this too. Reading many threads in some forum i tried with rEEfit. Reefit shows the usb thumbdrive whike booting, but using this will end in a black screen error from bios: "no bootable device....". Tried a knoppix on the usb thukbdrive, too.... No bootable device....
It seems that there is no way to boot from ANY external usb device like dvd drives or thumbdrives......
What more can i do? I tried for 2 evenings now, but nothing worked out for me......
Currently i don't see any any to install win 7 without an internal superdrive, but can this be??
Thanks for any comments.
Kwicks

Internal is definitely the easiest but you can boot from external HD or external optical drive, the mac is just very picky on what works and what doesn't.
For an external drive or usb stick it has to be GUID partition table and have 10.4.5 or better installed on it, for more info check this link out ( http://support.apple.com/kb/ht1948 )
Hope this helps,
Joe

Similar Messages

Can not boot from OSX disc

I recently partitioned my internal drive with an 80 gig partition to run Ubuntu , removed Ubuntu and now can not resize hd to recover the 80 gig that I used , there was a program with this Ubuntu install called rEFIt that was installed for the dual boot , My problem is that Itunes keeps crashing and I have spent somewhere around 8 hours trying to fix this issue and in the process I discovered that I now can not boot from the osx disc but I can boot from the Ubuntu disc , what can I do to correct this issue or is there anything that I can do to correct this and recover the 80 gig that I used ?

The only solution was to erase hd and restore from time machine backup......
According to everything that I have seen , read and tried when you partition the mac hd the way that mac is designed it will lock the hd thus preventing any access even using the startup disc to repair. As far as restoring everything after the erase and reinstall of the OSX that was easy and painless. FOR ANYONE WHO DOES NOT BACKUP THEIR DATA THIS IS WHY YOU SHOULD!!!!
Once OSX is reinstalled the migration assistant will ask if you want to restore from a backup , if you have time machine or any other sort of backup simply choose the one you wish to restore from and continue , must admit I was a bit hesitant at first , I must say that everything restored with the exception of some settings that I have had to restore but they were not major settings , after the backup is restored simply run update check and reinstall all updates , may need to do this a couple of times.
Depending on the amount of data you have will determine the length of time for restore (500 gigs about 6 hrs.) but it will restore user account settings , connection settings and network settings.
Hope this will help if anyone has experienced the same problem.

How can I boot from USB 3.0 disc on a Mac Pro 2013

I am just setting up a 2013 Mac Pro with a 4TB USB 3.0 external drive. I have cloned my boot disc over to it but have problems being able to boot from the USB drive.
It shows up in the startup disc in system preferences, but when selected as the boot disc and restarted it just boots from the internal SSD. Also have checked booting and holding the ALT key to see what happens but I am just shown the SSD and Recovery disc as options to boot from.
So it appears I can not boot from a USB disc on my new Mac Pro, is there a solution to this problem?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

HP Pavilion 11 x2 not booting from USB

I have tried everything I can think of but my HP Pavilion 11 x2 will not boot from USB...I have Windows 10 currently installed on it and need to boot from USB to allow me to install a new OS on the machine.
I have gone into hte bios...(which I can see is a locked bios with very limited options)....I have turned off the Secure Boot option and have set the USB has the first boot device.
But when I hit F9 on startup...it just gives me 2 options:-
OS Boot Manager
Boot From EFI File
I have tried Boot from EFI File...but this does not work..
I know the USB is configured correctly as I can boot from it on my desktop computer.
How can I get this to work?
Thanks in advance

hi,
i stumbbled into your thread while i was looking for a similar answer for my Pavilion X2 10".
mine was delivered with win 8.1 with bing. it was alright to use, but i was unable to bring this machine to connect to my office domain. due to the lack of networking features which is only available in the pro or enterprise version of win 8.1.
i tried many ways to load in a win 8.1 pro os. the disc is authentic, keys are authentic, usb stick or optical drives; it makes no differences. the machine just refuse to boot into the usb disc / stick like all other previous system does.
there isnt an option for the bios to go into legacy mode. however there is an option to turn off the secure boot, but that does not gives legacy support to the make the system boot to usb.
i had probably done the same things you tried, no matter what setting is done to the bios, there is always only 'os boot manager' and 'ueif' when i hit boot sequence (f9).
had tired everything that i can think of, talking to HP was like talking to an answering machine, and they were asking the most bacis questions ... "were you able to select 'legacy boot' from the bios menu?" ... even when i tell them there isnt a legacy boot option in the bios ... they were too amature .
i concluded that the only way to boot to usb is to do it in uefi with secure boot off and encryption turn off in win 8.1 (else it will bring u to bitlocker).
but i am still unable to boot into the usb media to install win 8.1 pro today. i gave up.

Can Solaris 10 boot from USB devices like USB thumb?

1. Any live CD build for Solaris 10? That's the one which can boot up from CD and run immediately.
No installation requirement.
2. Can Solaris 10 boot from USB devices like USB thumb?

You can find "live" CD and DVD images at OpenSolaris site: www.genunix.org/distributions/belenix_site. This OSolaris version is booted from CD/DVD drive and can be permanently installed on HD drive. Moreover You can find at this site suitable script for USB thumb preparation. However You should remember that the number of read/writes on USB thumb is limited (ca 400 and slightly more in more expensive versions).
Good luck.

Can't boot from USB or DVD. HP Pavilion g6-2257sr

My new notebook HP Pavilion g6-2257sr don't let me to boot from USB device.
When notebook's booting, I pressed ESC and F10. Then I set up UFEI boot order - USB-device / DVD / OS selector.
I use official Windows 7 disk, and several own USB devices with bootable images.
But rebboting use hard drive's OS all the same.
Please help. I want to delete current OS from my notebbok.
This question was solved.
View Solution.

Hi:
I would make a set of recovery disks first before proceeding.
To boot the PC you need to go into the BIOS and enable legacy mode.
Then you should be able to boot from another device.

How can I boot to USB device if no USB boot option in BIOS

I just purchased a Toshiba NB305-N410BL but am concerned as to how I would image the 250GB HDD if I can not boot from an external cdrom drive. I tried to backup to shared network folder but none show up on list. Only boot options in BIOS are HDD, FDD, and LAN. Thanks for all help in advance.

Hi, buddy-erp.
I don't know if my instructions apply to you because I only have the NB305 model. However, if you say you have followed all instructions, that is, 1) insured that no other USB devices are connected to your computer at bootup time and 2) have pressed F12 to enter the boot menu; 3) and then designated the USB flash drive as the source of the bootable restoration software you may need Toshiba technical support. I wonder if there is a BIOS update for your computer too. This may need to be downloaded and installed prior to beginning the restoration process. Nevertheless, as stated, I have a NB305 model and the instructions are clear. FYI (for your information), a virus infected my system and made certain changes to this process. Toshiba technical support informed me that the information displayed was wrong and the process outlined was unnecessary but did require technical support to restore it to the OEM default options.
Good luck.
Sincerely,
Bi-Ill
Good luck!
Sincerely,
Bill5960

Boot from usb device on hp elitepad 900

Hello, how can I boot from USB flash device on the hp tablet elitepad 900?

You have to create a bootable USB drive and then copy the bootmgr.efi from an Win7 machine to the USB drive. I ran into this issue when I reinstalled the OS on mine and it was a pain to figure out.

I can not boot from DVD or USB to install

I have a 27 in iMac with i7 processor. For reasons I wont get into (lets just assume I have the right reason) I want to do a complete fresh install of Snow Leopard and start completely over.
When I use OPT to select the SL DVD to boot, all I get is the apple logo, no spinning wheel, i let it sit that way all night still didnt work. If I force boot the SL DVD using C, same thing. So I tried formatting an external USB hard drive as a GUID drive and had the install residing on there, when I use OPT when booting the USB is not an option, nor is is listed in startup disks either.
I can not do a fresh install, and i have followed loads of tutorials online, but my DVD never does boot.

You need the discs for your computer. No other discs will work.
The retail copy of 10.6.0 doesn't have the necessary drivers for your computer, nor does 10.5. Your computer should have shipped with 10.6.1.
I think the inability to boot from USB is due to an invalid operating system being installed on the drive.
~Lyssa

MBP 2011 / 10.6.7: Not booting from external devices

Hi everybody,
I just bought a brand new MBP 2.3 GHz i7 QC, 8 GB RAM, 500 GB HDD/7.200. After updating to 10.6.7, installing my applications and restoring my libraries and documents, I made a complete backup of Macintosh HD on an external USB HDD using Carbon Copy Cloner.
Unfortunately, the generated clone won't boot, although the parameters of the external HDD are correct (GUID etc.). The boot process hangs at the white Apple logo display and won't continue. Additionally, I tried to start the system from TechTool Pro's and Drive Genius' original boot DVDs - they won't work either. Same for TechTool Pro's eDisk feature.
At last, ProSoft (maker of Drive Genius) support said that some kind of Apple development kit needs to be updated before they can provide a bootable DVD for 10.6.7. Nevertheless, why is the external HDD not working? It has been formatted using 10.6.7, so it should be recognized as a proper external boot device.
Any ideas? Any help is appreciated.
Message was edited by: SteffenKaiser

I can surely boot from Apple's OS X installation DVD. No problem. Hardware Test runs through smoothly. Eventually, I made the Carbon Copy Cloner image on the external HDD boot. That's sufficient for now, although I wonder why the DVDs (made with 10.6.4) won't work.

How Can I boot from USB - Portege A200

Hi,
I've got an Portege A200 which is only a couple of years old but the hard drive no longer works. Initially I thought this was due to corrupting the boot record on the drive but after attempting to replace the hard drive (with two different drives) it is showing an IDE #0 error upon boot. I have therefore come to the conclusion the IDE controller chip has died.
In order to get the latop working I burned a cd with the ubunto ISO. This boots ok but due to only have 512Mb RAM the system is somewhat limited and anything installed is lost everytime I reboot.
I have now bought a 2Gb flash drive and installed ubuntu onto this. My next problem is that there appears to be no boot from USB HDD or USB Memory Stick option in the bios.
The possible options that I can think of are:
1) Upgade the bios so it supports boot from memory stick (although no HDD so not sure how I could reflash the BIOS or if there is even a BIOS upgrade that would support this functionality)
2) Create a cd which starts the boot process then tells the system to continue booting from the usb drive (Is this possible and does anyone know where I might be able to obtain such software)
3) Boot from CD but use the USB to retain any information saved / any installs etc (I guess similar to option 2 except the cd would manage the whole OS and the USB would just hold 'additional' information)
If there are any other options that anyone can think of I am happy to give them a go. Seems a shame to have to chuck a laptop that isn't particularly old because the IDE controller chip has failed on the mobo.
I apppriciate any help anyone can offer.
Many thanks,
Mark

Hi
First of all I have to say that its not possible to boot from the external USB device like the USB stick, USB CD/DVD drive or USB HDD.
Its possible only to boot from the external USB FDD (diskette) drive
However, not the booting possibilities are clear but I think you have misunderstood the IDE#0 error message. In m opinion the IDE controller is not faulty but only the new HDD is not compatible and not recognized by BIOS.
There are different reasons for this issue
Mostly this error message appears if the HDD master/slave/c-sel settings are not correct.
Usually such settings dont need to be changed or switched on 2.5 HDDs but some HDDs support an jumper which must be set in the right position. But I dont if your HDD supports this
Furthermore the not compatible HDD size could be the reason for such error messages!
So finally I would recommend contacting the ASP in your country to get a new, compatible HDD and to check if the same error persists.
Good luck

W520: Unable to boot from USB - device does not show up in boot menu

I have a W520, and I am trying to boot from a USB key. The USB key is bootable, my old T61p boots just fine from it, and so does another computer I tried.
The W520, after pressing F12 on power on, immediately shows the Intel PXE agent and then some blue boot menu, which only shows hard drive and LAN as available boot options.
I have tried all three USB ports but the results are always the same - the USB device does not show up. Is there any trick or BIOS setting to enable boot from USB?
Thanks,
CS

Hello Neil
Thanks for getting back to me
The issue was that the usb drives were disabled in the bios from the Startup menu.
To enable
1. Enter bios
2. Select boot
3. If you do not see the boot device you require use the down cursor key until the "Excluded from boot priority order" becomes visible.
4. Select the device you require (in my case USB HDD)
5. Save and exit.
You can now boot from a usb stick and install the Linux distro of your choice :-)
Cheers

Imac 24" 2.8GHz won't boot from any device

Have an Imac Intel Metal unit. 24" with 4GB Ram. Will not boot from anything. It chimes loudly, the grey apple appears, the gear spins and then freezes. Then nothing. tried booting from several external drives. Even pulled out the internal Hard Drive.

Hey MacMyDayTF,
Troubleshooting steps for those symptoms are outlined in the following document. I'd go through the steps within to see if that resolves the issue:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Best,
Delgadoh

Optical drive trashed and MB Pro will not boot from USB image

Hello,
New here but I have searched and tried all I know to get this MBP working right again. My disk drive is trashed and has been for some time now, this is why I have a bootable version of Snow Leopard on an 8G flash drive. When my MBP began acting funny recently and I went to disk utility to verify permissions and the disk. Both failed = must boot from disk to repair, thus my issue. For some reason by MBP will not boot from the usb image I have used previously??? Pressing C or Option during startup does not work. If I press Option, I only get the harddrive option, C yields nothing and the computer boots normally.
Please!! let me know how / what you would do to resolve this. I don't understand why I have previously been able to boot from this same file on the same drive previously to repair my disk / permissions but cannot do so now. FWIW, I tried placing the file (OSX) on my external HDD to boot from, this did not work either (USB HDD).
Thank you in advance for your input!!

It isn't clear what you mean about your HD being trashed or which disk (HD or USB drive) you are trying to repair, but either way you need to start up from your Snow Leopard installer DVD & instead of installing anything go to the Utilities menu & run Disk Utility from there to repair either or both of the disks.

PT880 Neo-FSR not booting from SATA device

Hi everybody!
MSI PT880 Neo-FSR http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&cat2_no=&cat3_no=&prod_no=608
As read on the topic subject, I'm having trouble trying to boot up using my new SATA DVD-RW. This device works perfect while running Windows XP on my PC, but when I try to boot from it, I simply can't.
My PT880 Neo-FSR mobo is running the latest avalaible BIOS version (2.0) and Internal SATA controller and SATA boot ROM function are enabled. Looking inside the booting options, I just can't set my SATA DVD-RW as a valid device for booting up (I only see my IDE HDDs, FDD and LAN as booting options).
This is my first time triying to boot up from this SATA device and the first time I realized that I can actually use it for anything but booting, which is so weird! I even tried installing this device on my brother's PC and booted up succesfully there, so my mobo is the problem here.
If you're asking yourselves how I installed Win XP on this PC with no CD/DVD booting: My former IDE DVD-RW is now my sister's, so I kept previously instalation and just changed devices.
I need to run some utlities from a boot-CD and re-install Windows on this PC real soon, so I'd appreciate some help.
P.S. I tried to do my best with my 'rusty' English, so I hope you could fully understad what I've written above.

Quote from: Henry on 03-September-08, 14:26:24
Are you saying it does work but you simply can't boot from it? Have you tried by using the F11 boot menu?
Yes! This device has been working great, but the only problem I get is when I try to use it for booting.
I alredy tried using the F11 boot menu and nothing happened... It's so weird!

Imac 21" mid 2011 can not boot from USB device?

Similar Messages

Maybe you are looking for