IMac 24" loses WLAN connection again and again

Hy everybody,
I bought a brand new intel-based iMac 24" and I'm very pleased with it. I just have one Problem that i can't resolve. I have a WPNT834 (Netgear) WLAN Router using WPA2. The iMac can connect without problems, speed is very good and the signal strenght is perfect, but from time to time my computer loses it's WLAN connection.
If this happens it doesn't reconnect. I have to disable Airport, wait a minute and enable it again.
Can anybody tell my why this happens? I mean, that the connection get lost is not so tragic, but that it doesn't reconnect is bothering me.
Thanks in advance and regards.
Tobi
iMac 24"   Mac OS X (10.4.9)  

When you click on your Airport Status do you see more then one access point? Neighbors?
You can try changing the wireless channel on your router. That might help with the drop of connections. It's possible that another wireless access point in the area is on the same channel and causing a problem.
Hope that helps a little,
AL

Similar Messages

  • IMac loses wlan connection after 5min

    Hey, after updating to Yosemite, my iMac late 2013" loses wlan connection every 5-10 minute. I have to turn wlan off and on, to get it back to work. Does anyone have a solution?

    Hey, after updating to Yosemite, my iMac late 2013" loses wlan connection every 5-10 minute. I have to turn wlan off and on, to get it back to work. Does anyone have a solution?

  • WRT54GL loses Wlan connection

    Hi
    I have a problem with an WRT54GL Router. It keeps losing the Wlan connection. Then I have to reboot the router to get it working again.
    On some days everything works fine, and the other day I have to reboot every 5 minutes. 
    I don´t use P2P. So there are not many simultaneous connections. Mostly there are only one or two Wlan Clients active.
    Between the Router and the Client is only one Wall. Signal Strenght is at all times above 85%.
    Does anyone have an idea what might cause this?

    Try upgrading your router's firmware and reconfigure it from the scratch.
    Click on this link for the instruction.

  • WLan connected, iPad and iPhone internet ok, iMac not working after trying everything (manual ip etc...)

    I am quite new with a mac computer. But i think i nearly tried everything, i have no idea what else could help...
    My iPhone and iPad are working perfektly in the wlan. My iMac works very rarely. Yes it worked once by manual ip, but later it did not work again.
    Wlan always works (sometmes it takes a few seconds until thesymbol is fat, mostly it starts with "no internet")
    I tried so many things...
    - manual ip found out by my windows pc
    - $ in front of the password
    - the apple faqs on the websites
    Very strange, but i hope someone solved an comparable problem already ;)
    Thx!

    I had a surfstick before, does that influence the whole thing?
    And another thing: in other wlans the iMac worked perfectly... Without any manual settings etc.
    Anyone an idea?

  • N8-00 loses WLAN connection

    I have a problem when using my home router (belkin g-mimo) that after a while of using internet, and go to a  new web page I get "browser unable to connect to website". I then have to disconnect wlan and then re-connect to regain connection using the wlan widget.
    I don't seem to have this trouble on other peoples wifi networks but find this problem annoying on my own.
    I thought as a start I might be able to delete wlan settings and start again but not sure how to delete. I have tried before and wlan wizard now shows two versions of network name.
    any help appreciated.
    John
    Solved!
    Go to Solution.

    hell!!! people can anybody help me i hate My N8 i came australia on holiday the net was working good then i cant connect anymore, the wlan here but its not connecting, what i want to say the ïcon" wlan is connect but there's no tower i try deleting my wireless connection n started all again... + reset my phone but nothing coming out of it ...could anyone help me.... please i hate the day i spend my money on this damn phone since i got it... "within the warranty"they change my phone 4 TIMES, last december the warranty over, n the phone i got now, it's only 2 months old, yup just before the warranty over the phone was change n replace with a new one

  • My Magic Mouse loses its connection randomly and then re-connects later. Can anyone suggest why this happens? The batteries are fresh.

    Lately my magic mouse has been losing its connection quite randomly. It usually reconnects soon after. I bought a cheap USB mouse to keep me going during these unexpected down-times. The batteries are fresh and the switch is on. I've uninstalled and re-installed the mouse in Bluetooth, but the problem recurs.

    Try a PRAM reset.  That usually helps bluetooth problems.
    http://support.apple.com/kb/ht1379
    There are some other causes relating to rechargable batteries, see this thread:
    https://discussions.apple.com/thread/3058776?tstart=0
    Regards,
    Captfred

  • I lose bluetooth connectivity with lion on iMac 21.5. Have to reboot to get it to work again.

    Since upgrading to Lion on my iMac 21.5", once a week I lose bluetooth connectivity and have to reboot to get my keyboard and mouse to work.

    Backup up your data from both, and as long as you used Bootcamp to install the Windows partition you should be fine.
    If you used another method, or have more partitons on the drive than Bootcamp, DON'T upgrade to Lion, unless your prepared to rebuild the entire drive, install Lion from boot DVD's you make from the installer and so forth.
    Google "Egg Freckles Lion boot DVD" for details also Google for "Make copies of Snow Leopard install disks"
    Snow Leopard is stable, Lion has issues with older Mac hardware ranging from video to wifi to slow downs to radical UI changes.
    With all the effort placed in setting up Windows and OS X, to do that all over again to take a chance that Lion won't work on your machine is a a lot of risk for little in return.
    When Lion is stable then consider it, but right now it's not.

  • My Safari Icon ( Button) is missing in my iMac after I downloaded a update. How can I get the icon back on my desktop and connecting again to the Internet ?...

    My Safari Icon ( Button) is missing on my iMac after I downloaded a update. How can I get the icon  (Button Safari) back on my desktop and connecting again to the Internet ?...
    Thanks for the help    

    Often when people think they've deleted an application, what's really happened is that they deleted its icon from the Dock. In the Finder, select
    Go ▹ Applications
    from the menu bar, or press the key combination shift-command-A to open the Applications folder. If the application is in that folder, drag it to the Dock (not to the Desktop or anywhere else.) The other Dock icons will move out of the way to make a place for it.

  • Portege M200 - WLan disappears and cannot be connected again

    Hey guys,
    I have a toshiba portege M200 notebook with Windows XP Professional and Service Pack 2.
    If I activate the WLAN adapter the WLAN network is shown once and I can connect me and use it problem-free.
    If I deactivate and activate the WLAN adapter or it pass some time the WLAN network isn't shown. A reboot doesn't help.
    Can somebody say what the problem is?

    Hi
    How did you deactivate the WLan adapter?
    Did you use the switch at the notebooks side?
    Usually the WLan should be enabled using the FN+F8 option
    So if you your WLan will not work then you should use that the FN +F8 key combination in order to enable the WLan again.
    Furthermore you should check if you are using the latest WLan driver...
    Greets mate

  • HT5192 I have iPhone 4Gs Although I am in a good coverage  area I lose network connection and  re-establish  connection again

    I have iPhone 4Gs
    Although I am in a good coverage  area
    I lose network connection and  re-establish  connection again

    Please post in the iPhone forume. This is the iPod touch forum.

  • I have iPhone 4Gs Although I am in a good coverage  area I lose network connection and  re-establish  connection again

    I have iPhone 4Gs
    Although I am in a good coverage  area I lose network connection and  re-establish  connection again

    Please post in the iPhone forume. This is the iPod touch forum.

  • Here we go again. 5.0.1 has terrible battery life AND loses 3G connection now!

    I have another friend with the same issue, battery life is horrible still, dropping 10% in minutes. The phone also loses 3G connection, which I'm guessing is the problem because the radio is working overtime to reconnect.
    What the **** is going on.

    It's a conspiracy against you

  • IMac and other Apple devices lose wireless connections

    We have two Apple iMacs, a MacBook Pro, an iPad and iPad2 and they all intermittently lose their Wireless connection to my network.  All of my PC's work just fine and stay connected.  This is funny... the MacBook Pro booted to Windows 7 Pro stays connected, but the MacOS doesn't.
    It appears to be a problem with DNS, because if you ping to a remote host, you get a response back.  Also, if you put an IP address into Safari on the iMac and MacBook then a site will come online.  However, the iPads just say "You are not connected" while in Safari.  I have verified that I'm using the correct DNS addresses provided by my ISP, and I have a Windows Domain server running DHCP/DNS on the inside of my firewall.
    We recently moved and were issued a new wireless router by our ISP.  I was thinking that might be the problem, but then we don't have the problem with any of the Windows PCs.  This router is manufactured by Arris.  My other router was a Cisco that worked like a champ.
    Turning off the Airport feature and turning it back on restores Web Browsing capability.  Interestingly, if I have a remote desktop session running, it never gets disconnected even when the web stops working.  Again, symptoms point to DNS issues.

    If you feel it's DNS related then change the DNS setting to:
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences

  • The wlan connection of my iMac suddenly loses

    Hello communitie,
    for a couple of days the wlan connection of my iMac has suddenly lost.
    Everything is well again after deactivate and activate the airport again for an uncertain time.
    Best regards
    Kcuhen89

    I'm having the same problem with my new macbook pro (early 2011) with newest mac os. I use my business laptop (windows) on the same wlan with no connection problems...
    Any help???
    Regards
    Tom

  • I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

    I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
    if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
    because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
    can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
    Help.

    BB1B2,
    The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
    You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
    Sorry,
    Clinton

Maybe you are looking for

  • How to use web start call JMS -- new

    Hello folks : This works okay when I run the clients from a command line, but when I deploy with Java Web Start 1.2, I get a message saying "Ignoring com/sun/jms/util/jms.properties due to exception "java.lang.NullPointerException", I've put jms_clie

  • SAP NetWeaver 7.0 ABAP Trial Version SP12 - Request Release Error

    When i choose "release" in context menu to release the request ID: NSPK900001, the IDE show the following error: "Cannot access file [my computer name]\sapmnt\trans\tmp\NSPE900001.NSP" How do i fix it? Thanks!

  • Must force quit Mail application

    I am most used to using Entourage as my mail application but have been trying to use Mail but it constantly freezes and then I must Force Quit to start over. Keep going back to Entourage but of course I need Mail, for example, if I want to mail conte

  • Why can't I save documents?

    For the past 2 days, everytime I attempt to save a document, I get an error message "the file 'untitled' can't be opened becuase it has been deleted". I have tried to use save, and saveas, and change the document name and I still can't save any docum

  • Nls_language Please Help

    how do i set nls_language to utf8 so it would be initialized when db is started? when i try putting it into init<SID?>.ora i get an error that says: ORA-12700: invalid NLS parameter value (nls_language) i try doing this init.ora file: nls_language =