IMac 24" Screen Burn-in When Using iDVD

I had a 1.5 hr long video that burned using iDVD. I found that if I use iDVD the screensaver will NEVER turn on. So, when the iDVD finished I found that a bit of screen burn-in is stuck on my screen.
Seeing that this is an LCD I thought it was true that LCD's couldn't have burn-in like CRT's could but I'm guessing I'm mistaken on that.
Does anyone know how I can fix the burn-in and also how to get the screensaver to work with iDVD so it doesn't happen again?
- Joshua

Bringing this up from the almost dead....
...to setup a Hot Corner to sleep the display go to: System Preference > Expose & Spaces > Expose and in the Active Screen Corners section setup any corner you would like to sleep the display. Then any time you leave with a job running, just park the mouse pointer in that corner and sleep the display until you return.
That's fine and dandy for most things, but does not address the issue brought up by the initial poster. When running iDVD the screen will not blank nor will the screen saver start. If you have a hot corner to blank the screen and you move your mouse to the hot corner the screen will stay blanked for maybe 10 seconds before it unblanks. This is true using the iDVD that came with iLife '08. I haven't tried any others.
It seems that iDVD overrides the users sleep/blanking preference. That makes sense if you are watching something. It makes no sense during the 3+ hours it takes me to render a DVD disk image (I'm not burning a disk at this time).

Similar Messages

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

Screen Scrambles when using iDVD

Sometimes when using iDVD 08 the screen scrambles while I'm putting the DVD menus and such together. It doesn't crash per se, I can still run it, but I can't tell where anything is because the video is scrambled. Restarting my 20" aluminum iMac is the only thing that fixes this problem. It's like living in Windows all over again! Anyone else have this problem? Anyone know of a solution?

+Actually this is often the case when using most software...+
I'm not sure what software you're using, but I cannot think of a single piece of software I've ever used on my Mac that has required me to restart because it routinely messes up the graphics or the computer in any other way. That doesn't happen even in Windows with any single app (although it randomly seems to occur in any app at various times). Maybe you could clarify what you mean about often having to restart when using most software, because that has never been my experience.
I have not burned DVDs or disc images when that has occurred, mainly because I wasn't done editing and could no longer see what was going on well enough to finish the editing process. I have restarted my Mac and then finished the editing process, then burned. All my finished discs have looked like I have expected them to look.
Thanks for everyone's comments. Keep 'em coming!

I am currently experiencing problems burning a DVD using iDVD. I have created a project in iMovie. I have shared it to media successfully however when I try to burn it I receive a messaging advising there is insufficient disk space on assets.

I have created a iMovie and wish to burn it to a DVD.
I successfully shared media to browser in preparation to burn to DVD using iDVD magic.
I am able to successfully preview however when I try to burn I receive a error indicating "Not enough disk space on assets"
I am currently using a Macbook Air
Version 10.6.8
Model Name:          MacBook Air
Model Identifier:          MacBookAir3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          1.4 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBA31.0061.B01
SMC Version (system):          1.67f10
Serial Number (system):          C02DRL8JDDQX
Hardware UUID:          53310599-83EA-5F58-99A9-AE505506BBFE
Capacity 60.32 GB
Available - 2.49 GB
The iMovie I am trying to burn is 45 mins long
Any suggestions would be greatly appreciated...

Reduce your burn speed to 1/2 the Rating of the Media.
Disc Burner
If more than one supported disc burner is connected to your computer, choose one from the menu.
Preferred Speed
When you burn a CD, iTunes automatically uses the best recording speed for the CD. However, if your blank CD is rated for a slower speed than the maximum speed of your drive, or if you experience problems creating CDs, you may want to change the recording speed to match the CD’s rating.
Disc Format
Choose the type of disc you want to burn: Audio CD; MP3 CD; or Data CD or DVD.
Gap Between Songs
Choose the amount of silence, if any, between songs.
Use Sound Check
To have all songs on the disc play at the same volume, select this option.
Include CD Text
To include information that CD players in some vehicles can display, select this option.

When using my ipad air it keeps coming off the page I'm on or app and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping

When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)

Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e

Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
You may get a better responce in the iDVD forum.
https://discussions.apple.com/community/ilife/idvd
regards

After bringing in the movie from a video camera in iMovie and enhancing it tiles and transitions etc how do you and where do you save the project for burning DVD's using iDVD?

Where do you save a movie project for burning DVD's using iDVD?

I recommend that you use SHARE/TO MEDIA BROWSER in Large size. Then in iDVD, you open the Media Browser and navigate to your project. You can drag it into your iDVD project from there.
You can also use SHARE/EXPORT MOVIE and save to the location of your choice. You can then drag and drop into iDVD.

Apple Logo Screen (turn on screen) suddenly appear when using

Apple Logo Screen (turn on screen) suddenly appear when using my iPad Mini Retina, but every thing goes back to normal after. It happens like few times since I bought my iPad since December. My OS is ISO7.0.4

The iPad basically re-booted.
Eveytime it re-boot, take note of what app you are running. You need to find out what is causing the re-boot.

What shows on screen at startup when using find my mac if owner locks it?

what shows on screen at startup when using find my mac if owner locks it?

A gray screen where they will have to enter a six digit passcode to unlock the Mac. If the Mac were being used and the remote lock sent, the computer would re-boot to this screen.

Burned Image on screen, but only when using Safari

I have a burned image on my IPhone's screen, but only when I use Safari. Additionally, when I open Safari's multiple window viewer feature, the image is there as well. The home screen and every other app is unaffected. Turning off and on the phone does nothing to fix the problem.
I know removing the casing and battery is an adventure, so I am trying to avoid it if I can.
Can anyone think of a way to fix this problem?
Thanks for the help.

Troubleshoot Safari extensions ..
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Why does my iMac screen flicker only when using Safari? It doesn't happen with Firefox.

Yesterday, I had an issue with OS X, causing my screen to go black upon waking up my pc. Come to find out through the Apple Forum, that when the OS X was originally installed, it was not a complete install. Once I received the fix solution, completing the OS X install, (10.9.3) everything was back to normal, so it seemed.
Now, when using Safari, the whole page flickers and so forth, including the address bar. I never had problems with the screen prior to this. Also, it doe not occur when using Firefox.
Is there a fix for this? or an adjustment that can be made. This never happened prior to the OS X install, which was about 2 months ago.

Troubleshoot Safari extensions ..
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Picture is shakimg when I burn a DVD using iDVD 8

Can someone help me? Every movie I create looks good when played using iDVD preview but... when it is burnt it shakes!!
Help
Is there a special setting?
PT

Pawel Tauter
Did you use iMovie or FCP to edit the video? if it's the latter, there is no field dominance tab in FCP however you change it thru your sequence, ctrl+ click your sequence in the browser and then choose settings.
Change your field dominance there.... like this:
if on the other hand you used FCExpress and not FCP, then add the following video effect filter:
Effects -> Video Filter -> Video -> Shift fields

Multiplexer Error message when using iDVD

I have been using iDVD successfully but now have a problem. I set up the program and everything is working fine then, just towards the end of the build, I get a 'multiplexer error' message and everything stops. It does NOT say 'not enough memory'. What could have gone wrong? (The particular .mov file, produced on Final Cut Express, I am attempting to burn has been successfully run on iDVD previously without menus; the only change has been to create chapters and setting iDVD to make a menu.)

Hi
From FCE/P I do
• Export out as QuickTime .mov file
• Not selfcontained (not important but saves time and space)
• NO QUICKTIME Converstion
This file I import into iDVD.
*Multiplexing Error*
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
*Using strange letters in video project name* eg +,/; etc. keep to a-z and 0-9
strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in:". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutly needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From: Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
Yours Bengt W

Speeded up film in iMovie is jerky when using iDVD

The film I've created in iMovie HD uses speeded up and slowed down film which is smooth when played in iMovie. I've used iDVD to burn it to DVD, but when I play this, the smoothness of the original is gone, and there's a jerkiness to the motion.
Any suggestions for how I can keep the smoothness?
Thanks.

If your slow and fast effects play fine on your deinterlaced computer screen, but jerky on an interlaced TV, then that would seem to point in the direction of an interlaced/deinterlaced problem. iMovie renders deinterlaced video when it exports to iDVD. With iMovie 6.02 that caused slow/fast effects to play less smoothly on an interlaced TV. You might be experiencing a vestige of that bug. I have not used JES Deinterlacer, but I have heard that that freeware program works well to smooth out slow/fast effects from progressive material that is played on an interlaced TV. The website addy is www.xs4all.nl/~jeschot/home.html.
There are others on this forum more tech savvy than I. I just wanted to get you a response since no one had weighed in as yet.

How to get good picture quality on a burned DVD slideshow using IDVD?

After producing a slideshow on IDVD from either jpg or psd photos, it looked great when I played the project. Picture quality was excellent. When I burned a DVD to share the slideshow with a friend and when I played this on the same computer, it had lost resolution and looks awful. I am using best quality but this made no difference. On a hdtv using a standard player, the quality is mediocre. Is there any way to get a decent picture quality. I have also burned a DVD and CD from the IPhoto album, and the quality is better. IPhoto will not burn a slideshow or at least I do not know how to. Can you produce decent quality DVD using IDVD or is there a better application to produce decent DVD of photo slideshows?

....or is there a better application to produce decent DVD of photo slideshows?
Yes. It's called DVDSP (apple's top of the line DVD Authoring application). It has a much longer learning curve than iDvd and is more $$$ but it does work well. The Help Menu alone is over 640 pages long. However, is this app significantly better than iDvd solely in terms of visual quality?.... No.
But it does offer many more tools to address visual artifacts on the finished DVD, more audio control, much better control of durations per slide, audio, buttons that work as expected, among other things. (for additional examples of this see chapter 12 of the DVDSP Help Menu / starting on p. 373).
Short of DVDSP, and much less money, you can also try these 2 third party apps which come highly recommended on this iDvd Forum:
http://www.lqgraphics.com/software/phototomovie.php
http://www.boinx.com/fotomagico/overview/
At the moment most macs do not yet support burning to Blueray (which does offer much better results). Once this technology is more commonplace, then I believe we will see a significant improvement in what you are trying to do above.
Hope this is helpful but if not just come on back.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

IMac 24" Screen Burn-in When Using iDVD

Similar Messages

Maybe you are looking for