IMac 24inch - Boot Camp and Windows XP Pro SP3 - ZERO Audio

I've just used Boot Camp to install a fresh copy of Windows XP Pro SP3 onto my 24-inch, 2.4 gHz iMac.
Everything seems OK, except there is ZERO audio.
I've tried reinstalling drivers from RealTek, to no avail. I've downloaded RealTek's latest drivers (number 217) and they appear to install, but nothing works.
My Device Manager does not show any sort of Audio card whatsoever. Have I got some sort of hardware problem? (Audio works without trouble in OS X.) Why can't Windows find my Audio Card at all?

I also have the same problem. I installed the Bootcamp update for XP and then my audio does not work with XP anymore. It does work with Leopard still without a problem. I noticed that when I am in windows, and I turn the audio off of mute, there is a red light that illuminates from the Audio Jack. The Audio driver does show up on my control panel, but nothing is working. Is this a way to make us stop using windows?

Similar Messages

  • I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).

    I need to know which update(s) I can apply to help stabalize the system.

    Typing the body of the thread message in the title, huh? -)
    I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).
    Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
    Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out.  --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
    You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
    I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    http://www.apple.com/support/bootcamp/
    Helpful Apple Support Resources (Forum Overview)
    Boot Camp Support 
    Boot Camp Manuals
    Boot Camp 5.0 Drivers
    http://support.apple.com/kb/DL1638
    Frequently asked question
    http://support.apple.com/kb/HT4818
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
    https://support.apple.com/kb/HT4569
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/
    Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
    Yes, you can download the Boot Camp 5 Support Software here.
    http://support.apple.com/kb/DL1638
    How do I use the Boot Camp 5 Support Software I downloaded from the web page?
    The download file is a .zip file. Double click it to uncompress it.
    Double-click the Boot Camp disk image.
    Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
    Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
    Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
    When your system restarts your Windows 8 installation is done.
    Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
    How do I format USB media to the FAT file system?
    Use Disk Utility to format a disk to use with a Windows computer. Here's how:
    Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
    Open Disk Utility.
    Select the disk you want to format for use with Windows computers.
    Click Erase, and choose one of the following from the Format pop-up menu:
    If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
    If the size of the disk is over 32 GB, choose ExFAT.
    Type a name for the disk. The maximum length is 11 characters.
    Click the Erase button and then click Erase again.
    Which versions of Windows are supported with Boot Camp 5?
    64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

  • I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install  Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

    I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
    So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
    Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
    Thank you.

    You're welcome
    Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

  • Lion, Boot Camp and Windows 7 Issues

    Couple of questions regarding Lion, Boot Camp and Windows 7... I never had issues with Snow Leopard and setting up Windows 7 on my iMac (expcept the dreaded black screen after restart, bu got that fixed)
    Let me start off with my specs and then I will ask my questions:
    iMac 27"
    i7 Quad Core (1st gen)
    16GB Ram
    1TB HDD
    OS X Lion (Fresh Install - Not Upgrade)
    All updates for OS and iLife and other installed software:
    Adobe Creative Suite CS5
    MS Office 2011
    Boot Camp 4.0
    Window 7 Ultimate
    Ok... here are my questions.
    When I fixed my black screen issues after installing a fresh copy of Windows 7 - I had to install MacFUSE and Tuxera NTFS in order to delete the the stock ATI driver so the second rebot on the install of windows 7 would work and boot correctly. After rebotting into my mac side I now always get this message from Tuxera.
    What does this mean? Now in the finder when looking at the computer drives.. It does not show the BOOTCAMP partition...
    However, when I resart i can hold down the ALT key and get this menu:
    I know this might seem strange to ask, but why are the Macintosh HD and the Recovery HD text smoothed and the Windows text not? Being a design I see the difference and it makes me wonder why this is. (It is almost like the BSOD icon apple used forwhen connecting with shared PCs)... Anyways, I can boot into windows when clicking this drive.
    After getting to windows 7 it will not let me run updated. The OS is activated and I have even installed SP1 manually, but it always tells me that the Update service is not running. When in fact it is. I have checked it and it is set to start automatically. I have reset and shutdown my computer more than 10 times... I can't figure out what the issues are.
    Overview:
    Why do I get the Tuxera NTFS error?
    Why can I see the boot camp partion when manually selecting it form startup, but it does not show in OS X
    I can't get Windows to update? Any ideas?
    Thanks for any help you can provide.

    These various utilities like Tuxera are incompatible with Lion. Partly because MacFuse is incompatible. You need to remove them completely.
    As for the Windows partition you might consider using Boot Camp Assistant to remove it. Then make a new partition and install Windows. Remember to use the Windows formatter to format the Windows partition NTFS.

  • Boot Camp and Windows 7 Problems

    I have found a reproducible bug with Boot Camp and WIndows 7.
    Clean install of OS X 10.6.2, Boot Camp Asst. Partition on my Mac Pro boot drive, clean install Win 7.
    Problem: while in OS X, Disk Util Repair Permissions takes forever, churning away at the hard drive. Also, intermittent Spotlight hangs, and weird Dropbox behavior where it churns the disk like crazy again.
    I have Paragon NTFS for Mac v 7.03 and perhaps this has something to do with it.
    After retuning to a single partition using Boot Camp Asst. (deleting the Win 7 partition), all is back to normal - Repair Permissions takes about 60 seconds, no Spotlight or Dropbox issues whatsoever.
    Using Fusion for Win 7 for now. Awaiting official Apple support of Win 7 in Boot Camp.
    Wondering if anyone else can confirm this behavior where you have a partitioned boot drive with 10.6.2 and Win 7, with or without NTFS for Mac 7.03.

    Addendum: on reboot/option key boot screen, it showed OS X volume, Win 7 Volume, and EFI Boot Volume - the latter had never been there before with Vista.

  • Boot Camp and Windows XP Questions

    I have a new intel iMac and want to install Windows XP (just for kicks, really). I have a copy of a Windows XP disc that I bought for my dad a couple of years ago. The Boot Camp page says that you have to have Windows XP with Service Pack 2. How do I know if my XP has Service Pack 2?? I went to the windows home page, and one can download Service Pack 2, but the Boot Camp instructions seem to imply that you have to have a copy of Windows XP with Service Pack 2. Anyone have any insight? Will my XP work?
    iMac Intel, Powerbook G4   Mac OS X (10.4.6)  

    Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
    Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
    The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
    Here is a link;
    Forum: Boot Camp Public Beta

  • Boot Camp and Windows XP right-click

    I have a Mac Book Pro where I have installed Boot Camp and Windows XP with great success. I have one problem; I can not right-click. When I press ctrl+mousepad button it still works as an left-click. Very frustrating. Can anyone please help? And no, I do not have an external mouse
    Best regards
    EtronX
    Mac Book Pro   Mac OS X (10.4.8)  

    Sorry folks Did a search here in the forum and found the answer. To quick

  • Unable to install Boot Camp and Windows 8.1 on Mac Mini

    Hello,
    My computer is a late 2012 mac mini with fusion drive. OS is OSX 10.9.1. Also an apple external optical drive and a Windows 8.1 full install DVD. I attempted to install Boot Camp and Windows 8.1 and failed.
    I ran Boot Camp Assistant and first problem was when it rebooted the computer - I got a text message that said the OS was missing. After a while I tried holding down the Option key while rebooting, then I got several choices to boot from - I chose the windows disk, and windows installation started.
    I was eventually given a list of 6 or 7 partitions to chose from, to install windows into. I  settled on the one marked BOOTCAMP. It seemed the best guess. But the installer said that it could not install on this partition. Something about the wrong format or EFI or boot partition(s)?? In fact, the installer would not let me install into any of the listed partitions.
    I restarted Boot Camp and it allowed me to remove the boot camp partition and revert to OSX only. Thanks for that!
    My questions: is Windows 8.1 supported with my configuration? I know the FAQ says it is not. If in fact it is, did I do something wrong?
    Thanks,
    Doug

    Poking around, I found an installation manual which was downloaded to my USB drive with the boot camp windows drivers. It says that when I reached the point in the windows installer where I'm given a choice of partitions, I should choose the one marked BOOTCAMP, and format it. Which I didn't think to try before. So I tried again, using Boot Camp Assistant from the top.
    Failure again. This time, when the computer rebooted, I selected the Windows icon as before, but I got a text message saying that the boot manager couldn't be found, and a dead stop.
    I also found that on the option-key reboot disk selection screen, I could eject the windows install disk and reinsert it. When I did that, I got the Windows boot icon and another icon labeled EFI boot. So I also tried that icon, with the same result.
    So, I'm doing exactly what I did before (I think), but now the windows installer won't start.

  • I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC or not?

    I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
    I am worried that  may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!

    Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
    If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
    The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
    You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen.

  • Lose airport connection after using boot camp and windows XP

    After using windows XP on boot camp and shutting down windows and booting to Mac OS 10.5.7 I lose the airport connection and have to restart or reset my airport extreme base station. My imac 2.8 is connected to airport via ethernet. Air port is operating on 5.7 version. This is a recent development and suspect it is related to updates in windows. I do not know where to start but need to solve this problem as it interrupts the other computers on wireless. Thanks Carl

    I have solved problem. It was in the windows settings using airport rather than ethernet connection. Carl

  • On boot camp and windows 7 cannot use dimmability keys on wireless apple keyboard.

    Hello,
    I am using boot camp under windows 7 on my mac book air.
    However the dimability keys and sounds keys cannot be used with my wireless keyboard.
    Do you know how to fix this ?
    Many thanks

    The 2007 MacBook Pro only supports 32-bit Windows 7 through Boot Camp although it has got a 64-bit processor, so buy a 32-bit Windows 7 version.
    Boot Camp Assistant (in /Applications/Utilities) will guide you through the steps to install Windows through Boot Camp. Follow Apple's steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

  • Boot Camp and Windows 7 - uncompatible drivers and BC 3.0

    I recently installed Windows 7 on my MacBook Pro using Boot Camp. The installation wen well but when I inserted and tried to run the OSX setup disc, the system referred to known incompatibilities and aborted. I then tried to run the Boot Camp 3.1 driver but this also aborted, stating that Boot Camp 3.0 was missing. I have tried both the 32 and 64 bit Ultimate version and the Enterprise version of Windows 7, always with the same result. I then reinstalled Leopard (and created a mess in a number of other ways) to see if the 3.0 driver had been deleted by mistake. This did not help however. Is there anything I can do?

    Boot Camp in Windows has nothing to do with Boot Camp in OS X. So, there was no need for you to reinstall Leopard.
    Since you're using Leopard, your Leopard disc will have the 2.xx drivers, which, (apparently) will not install in Windows 7.
    You'll need to get a hold of the 3.0 drivers. The 3.1 update downloaded from the Apple site won't install without 3.0 drivers installed.

  • Boot Camp and Windows Media Centre Edition?

    Just curious ... has anyone tried installing Windows Media Centre Edition with Boot Camp on their MacBook Pro? If so, how did it work out? Any issues?

    Look here: http://discussions.apple.com/thread.jspa?messageID=2090789??
    In general, I'd say the Boot Camp forum is a better place to work on Boot Camp issues than in the model-specific ones.
    Also, searching first is always recommended. In most cases, a person coming to these forums with a question or an issue is not the first one. With one exception, of course…
    Randall Schulz
    iMac 20" Core Duo; MacBook Pro Mac OS X (10.4.6)

  • Removing boot camp and windows

    I have a mac mini with boot camp running windows XP.  I am wanting to remove windows, and all windows components, and only run the the apple OS on it.  How do I do this?

    Open the Boot Camp Assistant in the /Applications/Utilities/ folder and return the drive to a single partition setup.
    (85775)

  • Boot camp and windows 7 but window wont find usb to download support drivers

    Used Boot Camp to partition, downloaded support onto USB zip drive, installed Windows 7 fine I thought, but in Windows 7 now it will not find my USB so i can't download the support drivers from my zip drive back into Windows.  No internet found either (probably because i can't download the support drivers).  HELP QUICKLY please!!!

    Boot Camp in Windows has nothing to do with Boot Camp in OS X. So, there was no need for you to reinstall Leopard.
    Since you're using Leopard, your Leopard disc will have the 2.xx drivers, which, (apparently) will not install in Windows 7.
    You'll need to get a hold of the 3.0 drivers. The 3.1 update downloaded from the Apple site won't install without 3.0 drivers installed.

Maybe you are looking for