IMac 27" 3.06ghz white screen for 40 seconds on start up before grey apple

when i start up my iMac 27" 3.06GHZ i get a white screen for 40 seconds before the grey apple appears and it boots up.
If anyone else is experiencing this or has a solution it would be great if you could reply.
Cheers.

Hi guys,
I'm new to the forum, i have recently bought a new imac 27" i7, i don't have any problems with white screens when starting up, the imac runs great, however when i try playing any games thats when the problems start. i installed X-plane it first worked without any problems but not in full resolution, i upgraded the resolution to the maximum imac resolution and from that moment every time i start the game the screen turns white you can hear the imac starting the game and even for a while sound appears, but then after 30 seconds the programs fails and you get a typical apple message.
i have also tried installing need for speed, here i didn't change anything to the graphics however the problem occurred straight away. white screen then the sound of the games menu and crash. did anyone else have this problem? is there a solution to this? i would like to apologize if this matter has been discussed in earlier forums. However i hope there is someone whom is able to give me a helping hand here. Whats wrong???? thanks ruben

Similar Messages

  • Email not opening This is a sudden thing, Email had been working fine for two months then today would not stay open now it will not open at all. after trying to open mail I receive a white screen for a nano second and the app closes

    Email not opening on my iPad2 This is a sudden thing, email had been working fine since purchasing the device then today would not stay open,  now it will not open at all. After trying to open mail I receive a white screen for a nano second and the app closes.

    Have you tried closing the Mail app completely ? From the home screen (i.e. not with Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Iphone 3gs shows white screen for a second and reboots.

    While I play games, watch videos or do anything, the iphone displays a totally white screen for less than a second and then it reboots. After this it starts normally and then this all happens again after about 10-20 mins.
    Plz give me any suggestions to fix it. What is the problem? any hardware prob??

    Hello, noyz23il.
    I would agree that this is a unique issue.  I have attached an article that goes over basic troubleshooting that may help.  In this article, see the sections referring to display, camera and blank white screen.  If this does not resolve the issue, please see the last section regarding "issue not resolved".
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Cheers,
    Jason H.

  • Yosemite my iMac stuck on white screen for 18 hours so far

    DDownloading Yosemite the software has, I believe, downloaded I have progressed but have now been stuck on white screen for 18 hours. I have my mouse arrow working but nothing to point at. Please how may I tell if anything happening?

    Start your computer with the original DVD that came with system and repair your disk with disk utility, also repair permissions.  http://support.apple.com/kb/TS1417

  • 27" 2009 iMac is stuck on white screen after OS X Maverick update

    27" 2009 iMac is stuck on white screen after OS X Maverick update.  How do I get past this White Screen?  I have tried to use the PRAM reset, holding down Shift,Command, R, and P after turning off computer then when I turn it on, having those pressed until I see the apple symbol.  I only hear one chime. Never get to a second chime.  Thank you.

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup - Gray Screen
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • I have a white screen for imessage.  Everything else works but I can't do anything on imessage.

    I have a white screen for imessage.  Everything else works but I can't do anything with imessage.  How can I fix this?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Messages>Send and Receive and sign out and sign back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • 20" Imac has white screen and freezes at start-up

    my 20" imac will not start....help...All I get is a white screen and tone at start-up then it stays white. I tried hooking up a bootable firewire drive and pressing the alt/option key at start up nothing. I also tried the command/option/p/r at start up, it will reboot to the same screen. I also tried running the hardware diagnostics at start-up...no response. Computer was purchased on Nov .4 2007, warrenty just expired.
    Help......Please....

    I had the exact same problem today. My iMac 20" (iMac 8,1) would't boot any more, staying stuck on a white screen immediately after the normal start-up chime. Nothing worked (no safe mode, no DVD boot, no disk selection icon when starting with alt pressed, no Apple hardware test, no parameter RAM reset, power management chip reset had no effect, no verbose mode, not even open firmware).
    I browsed the forums, but what I found didn't help, so I was about to stop trying and have it fixed by Apple. But my son told me he had noticed that after "a long time" (he's 4...), a folder with a flashing ? would appear. I figured that wouldn't happen in case of a severe hardware failure, so I tried one last thing: I hooked up an old PowerBook in target disk mode via Firewire and restarted the iMac. I tried several times (with and without alt pressed), but nothing happened (when pressing alt, a functional mouse pointer would appear, though).
    Then I restarted a last time and left the iMac sit there on its white screen for about 20 minutes... and that's when the miracle happened: it finally booted off the target-disk mode PowerBook's system!
    I ran Disk Utility, which saw the iMac internal HD as disk2s0 (or something like that), and launched the disk repair process. After about three error-ridden verify-repair cycles, the green ok message finally appeared and the volume mounted as if nothing had happened. I rebooted off the internal disk without a glitch, and I still have to find damaged or lost files.
    I guess I was lucky that my HD problem was benign enough to be cured by Disk Utility. But even if that had not been the case, at least I'd have known that the HD failed, and maybe I could have saved some files using recovery software. Whatever the case, if you've got an external bootable drive, it's definitely worth trying before handing your iMac over for (usually horribly expensive) repairs.
    Good luck!

  • Imac 27 as an external screen for PC with VGA

    Can I use the Imac 27 as an external screen for my PC? Then PC has VGA output. Will a VGA to MiniDisplay work?

    No. The input needs to be either from a Mini DisplayPort or regular DisplayPort. There are a few expensive conversion devices that go from DVI to Mini DisplayPort. However, I do not know of any that convert from VGA, which is an analog format.
    The other problem, even from DVI, is the high resolution of the 27-inch iMac display. The 27-inch display is 2560x1440. That is above the regular (single-link) DVI max resolution of 1920x1200 and also above any VGA resolution. So unless the output is Mini DisplayPort or DisplayPort (or dual-link DVI), it can't even reach the resolution needed to use the 27-inch iMac display.

  • IMac intel snow leopard white screen must restart?

    since i installed snow leopart my iMac frozse with a white screen. I pressed and held the power button and the computer restared ans seems OK. I ran the Hardware test from the install disc and no problems were fond. What is wrong?

    It soumds like nothing is wrong now, but there isn't much we can say without more info from you, like what you were doing when the iMac froze, if this happened just once, etc.

  • Hello! i've a problem with my Imac. it shows me white screen with a folder with quastion. it could be a problem with hard drive. i should insert mac os cd, but i couldnt find it. in Russia, in Finland and in Sweden the same problem)

    hello! i've a problem with my Imac. it shows me white screen with a folder with quastion. it could be a problem with hard drive. i should insert mac os cd, but i couldnt find it. in Russia, in Finland and in Sweden the same problem)

    Have a look at some of the suggestions in this link:
    http://support.apple.com/kb/TS2570?viewlocale=en_US&locale=en_US (Russian is available from the link within the article (top right of the page).

  • IMac 24 has a white screen

    Imac 24 has a white screen and is not responding???

    Welcome to the Apple Support Communities
    If you can't do anything, hold Power button until your computer turns off, and then, try starting the computer and check if it works correctly

  • White screen when iPod 5G starts up

    I updated the software on my iPod today whilst downloading the Mac OS 10.4.4 update/QuickTime update/iTunes update etc... It was working perfectly before I updated it. Now it just starts up with a blank white screen. I've tried resetting it a couple of times, restarting my computer whilst it is connected. I've left it until it powers down again and tried reseting the iPod. I've also tried plugging it into the computer when it's powered down, and my iPod makes a few bleeps before going to a back white screen.
    Any ideas?
    Ratbag

    I have fixed my iPod blank/black screen problem (i suspect black screen for iPod5G black model, and white screen for the white model) On Black Friday, which was yesterday, after I upgraded the newest releases on QT/iTunes602/osx1044/iPod11, iPod didnt do anything, no mounting to my iBook/iMac/G5PwrMac. Hard reset didnt work, etc.
    I decided to fix the iMac permission with local drive DiskUtility, then reboot the iMac with the Original Tiger iMac DVD software restor disc which comes with the desktop then repair the volume with this method. Then I reboot and then I did an extended hardware test with the same disc, but with the Hardware test disk (which is the same as software restore DVD, iinstead of holding down the c key, hold down the option key when reboot with the disc)
    After all that, iMac restarted and recognize my 5G iPod 60GB, I quickly restore the whole iPod to manufacture setting, hopefully you have all the info backed up somewhere, I did a clean defractmentation, and then used the iPodUpdater from 11-17-2005 to restore the iPod 1.0 version.
    Now I am done and my iPod works like new. Go try it guys... Good luck!

  • My sons ipod shows the apple sign and then occasionaaly a white screen appears and then goes back to the apple symbol.. He cant get it to turn on

    my sons ipod shows the apple sign and then occasionaly a white screen appears and then goes back to the apple symbol.. He cant get it to turn on.. He has tried charging it.He also held down the sleep/wake button and the home button at the same time to reset it.  we need help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • The Macbook Pro will not start past the grey Apple logo screen? Any help will be most welcome?

    The Macbook Pro 13, late 2009 will not start past the grey Apple Logo screen?  Any help will be most welcome? Thanks

    Have you tried booting with the install disc that came with your computer?
    Find it and then run Disk Utility to verify your hard drive. If errors are found, try to repair the disk.
    It sounds as if the hard drive might be failing.
    Clinton

  • IMac 27inch - goes white screen for about a minute before start up? any advice...

    Hi
    When I start up my iMac 27inch, the screen goes white for a minute or two before a white ball starts to spin then the apple sign loads and thge iMac loads.
    But this shouldn't happen, any suggestions..

    Try an SMC/PRAM reset:
    SMC RESET:
    Shut down the computer.
    Unplug all cords from the computer.
    Wait fifteen seconds.
    Attach the computer's cords.
    Press the power button to turn on the computer.
    PRAM RESET:
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

Maybe you are looking for

  • X230T graphics driver problem

    Hi everyone~just before i start im not a huge programming nerd so youll have to try and keep it simple kay?XD anyway up until about janurary i was using 123d by autodesk for some designing stuff. One day i got a message while starting the program ayi

  • Java studio Creator  Mysql

    How can I use mySql and JSC does anybody know where I can find examples thankz

  • HP Mini 5101 ***Speakers Crackle*** Guys Please HELP ME!!!

    Hello guys, Ive been browsing the forums but no luck with this issue. I installed a Windows XP Pro SP3 on my HP Mini 5101. I also installed the appropriate drivers for this machine. All works well but got a problem in my speakers. A crackling noise i

  • Credit data refresh on delivery document

    Hi I've noticed that the credit data (Risk category / Customer credit group etc) on an SD delivery document is copied over from a sales order. Is it possible to have the credit data refreshed from the credit master when a delivery document is created

  • Temporary Error - PRX4

    Hi All, For months our Exchange servers (2013 - 1 x CAS - 2 x MBX (Disparate Datacenters), have sat there chundering away, happily working nothing wrong, patching when patched. Two days ago we started getting a PRX4 Error - rebooting hasnt cleared it