Imac 27 in and bluetooth mouse and keyboard with windows

Mouse and key board will not work with windows? Is there something i can download to fix this. If i boot up in widows i have to go to a wired keyboard and mouse.

I forgot to add im running windows 7 pro with bootcamp.

Similar Messages

Brand new IMac 27 bluetooth mouse and keyboard not connecting for eight minutes after start up.

I have a new imac 27 that has worked flawlessly for three weeks.
All of a sudden, when starting up the mac boots fine but the bluetooth mouse and keyboard are non responsive. This state is maintained for between 7 and 8 minutes then both mouse and keyboard start working and continue doing so for the rest of the day....until the next restart and the whole saga repeats itself.
Both sets of batteries are fully charged.
I have scoured different sites and tried any suggestion that made any sense, to no avail. All I am able to do at the moment is to do the time, wait the 7 to 8 mins. and then all's good.
My first Mac and this is very annoying especially as Apple must be aware of this issue but no solution is forthcoming!
Any suggestions/workarounds would be great.
Thanks

if you are using rechargeable batteries sometimes they don't stay charged for as long as they should try using alkalaine batteries and see if the issue still persists.
also try doing an SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964

Bluetooth mouse and keyboard do not work

I purchased an iMac G5 about 6 months ago. I got it with a bluetooth mouse and keyboard. I have had trouble with it from day 1. Apple had me replace the logic unit, and it worked for a couple of weeks. Then as soon as the 90-day warranty for complimentary service ran out, it began working sporadically. Now it doesn't work at all. It says I don't have a bluetooth module installed or attached to my computer (which is what it said before the logic unit was replaced. The computer works fine with a USB mouse and keyboard. Had I known bluetooth was so tempermental and difficult, I sure wouldn't have got it with my computer.
Unless there is a smart person out there who knows what is going on, I guess I need to buy a new USB keyboard and mouse. Anybody interested in buying a bluetooth keyboard and mouse cheap?

Russell,
The warranty period on your mac is 1 year. The complimentry phone service period is 90 days unless you have a hardware problem. I'd say you likely have a hardware problem and will not be charged for the phone call.
I'd suggest 2 things:
1. Sign up for Applecare as has been recommended countless times.
2. Make the call to tech support and see what they say about your problem.
Good Luck,
John

TS3048 my new macbook pro retina display continues to drop bluetooth mouse and keyboard

Has anyone found a solution to the persistent retina display issue with bluetooth mouse and keyboard?

Hey i bought a 2015 macbook pro retina 13'' as well, are mainly ur arrow keys loose/wobbly? i may have this issue too but am not sure if this is supposed to be normal or not.

Bluetooth mouse and keyboard go off exactly the same time, and don't connect agian after ive installed the mac os x 10.8 updates please fix this apple

After Installing the mac os x update for 10.6.8 ive recentley in the last couple of days the bluetooth mouse and keyboard going off at the same time ive looked at some help but i feel like this is a software bug after installing so any other suggetions than taking it into an Apple Store,
I hope apple fixthis problem in there next patch update.

Hi,
Welcome to the  Discussions
Does the App launch form the Applications Folder rather than the DOCK ?
The icons in the DOCK are links to the App. Sometimes this link can get broken.
8:37 PM Sunday; December 27, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help!

G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac

Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support.

TS3048 My bluetooth mouse usually loss with unknown reasons and it then automatic connected again after some clicks.

Dear Sir or Madam,
I have bough my Macbook Pro since 8 months ago and it seams quite good upto now, however in these days my Bluetooth mouse ussually lossed with unknow reasons and it then automatic connected again after some clicks.
I have check mouse battery as well as relevent reasons like turn-on, but it still repeated and I don't know what is exact problem, it due to my mouse or my mac?
Thank you very much and looking forward to your help.
BR

Check your Bluetooth, do you have a bunch of stuff listed in there that you are no longer using?
Or another peripheral you stored away in a cabinet near by?

Problems with a bluetooth mouse and others operating systems

Hello, I have an error related to bluetooth devices.
I have on my Mac mini apart from Mountain Lion, a Linux distribution.
Steps to follow to find the error:
1. - Connect a bluetooth mouse to Mountain Lion and set it up.
2. - Reset the mini, start with Linux and also configure the mouse.
Now the mouse works fine on Mountain Lion and Linux.
Start again with Mountain Lion, you will see that the mouse does not work, but the system has added and configured.
That mistake I've seen for the first time in Snow Leopard, Lion has continued and now with Mountain Lion.
The only way to fix it is to connect a USB mouse, remove the Bluetooth mouse and add it again.
The configuration fails again when using the mouse in Linux.
Tested on another Mac (Mac-Pro) with the same result.
(I tested it with a Dell BT Travel Mouse and a Magic Mouse)
Regards

First, excuse my poor english
It's not offend, but I understand that at the time that Linux is off, and OSX is on, is OSX which is not able to work with the mouse.
I do not know what is the reason for which the operating system is not able to operate the mouse, even if it is paired and authorized.
The system also says that the mouse is working properly, when it is obvious that it is not.
Moreover, the Bluetooth preference pane is completely slowed and functioning incorrectly.
And finally, to comment that the mouse works properly on Linux after having done in OSX ..., which shows that the problem is OSX.
If I open this post is for someone to try and investigate.
Would be nice if Apple released a patch as it is clear that something is not working well in OSX.
What I did not expect was to listen that having a Linux through the middle, there is no problem.
regards

Is it Possible to have different sensitivities for trackpoint and bluetooth mouse.

I have an x200. I recently purchased an interlink electronics bluetooth mouse and connection and setup worked great.
The only problem is that the sensitivity that is good for my tackpoint is WAY too sensitive for the mouse.
Is there a way to set up different sensitivities for the bluetooth mouse and the trackpoint so that i don't have to toggle the sensitivity every time I plug in my mouse?

Thanks, but I understand the varying inherent sensitivities. I was just wondering if i could adjust a setting or install drivers or something that will automatically change the sensitivity setting when my mouse is connected to the computer. I'm looking for that or something that will specify sensitivity settings for my mouse without affecting the trackpoint.
I have an x200 running Vista Ultimate with the lenovo trackpoint drivers.
Message Edited by ender63071 on 01-07-2009 03:27 AM

Conflict Between Bluetooth Mouse and WIFI?

I Bought the new MBPR X72 and a Iogitech Bluetooth Mouse.When i download something by Wifi,My mouse can't work well.I search the answer on Google,some people said that there is a conflict between Bluetooth mouse and Wifi.Because they are both use the 2.4G HZ.So anyone can help me ??

If you are on your home network, you could set the router and MBPr to use only the 5 GHz band if you are using the n-protocol WiFi. That would mean logging intothe router and changing band usage settings. The MBPr would follow what it sees as the wireless signal.

Mouse cursor is stuck top left corner of screen. It will not move. Tried both my Bluetooth mouse, and a USB mouse. Not moving but will click

Tried un pairing the Bluetooth mouse and reconnecting it. No change. Tried both those resets people suggested to others in the forums, that didn't help either. Borrowed my friends USB mouse for his Mac, the same thing. Cursor will not move, but the click works.(this is what is happening for both)
If you are kind enough to offer help, please be aware of the following: this is my first Mac. I really know nothing about them.

Yes, once when I first noticed it, and each time I tried both the pram reset, and when I did the other reset (holding down p&r and the other two buttons before the grey screen, and waited for it to reboot from there). Can't remember what that reset was called

Huawei e220 hangs on Mac Mini G4 and USB mouse and keyboard slow way down

I have a Mac Mini G4 running os10.5.8 My mouse and keyboard are a creative wireless combination that go to a USB hub then to the USB port on the mini. When I use my Huwei e220 wireless broadband modem, it frequently hangs when disconnecting, and the mouse and keyboard barely work. Activity monitor shows the CPU load is not very high at all, yet the mouse is almost stuck. If I put the computer to sleep, then it comes back and works fine. Its a bit of a hassle, and seems to be specific to the USB on the mac mini.

Is the modem connected via USB?

Setting up Bluetooth Apple Aluminum keyboard with Rocketfish

Hi, I need some help setting up a Bluetooth Apple Aluminum Keyboard with my Rocketfish USB tranciever. I'm on Windows XP SP2, and I have the Rocketfish Bluetooth software installed. The keyboard is discoverable, however I cann't pair it for some reason.
In the setup process, the software detects the keyboard and continues to try to pair it. This is where it gets tricky. While pairing it, I apparently have to type a security code into the kayboard and press enter. After typing the code, the software proceeds to ask me to type in a code. Assuming that the code the software needs is the same code I typed on the kayboard, that's what I did. After typing the code, it either does nothing or gives me an unknown connection error. I have used the very same keyboard with the very same Rocketfish USB tranciever on a Mac and it worked fine.
I really do need help, I've been trying to get it to work for almost two hours now.

If I read this correctly, you need to add the device as a separate connection. The little + icon at bottom left in System Preferences > Network will allow you to do this. Then when you connect, you may need to select that specific connection. Also adding a location (instead of Automatic) may also effect this easily. That way, the two iPhones are isolated from each other.

TS1363 "An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari

Is Photoshop elements 10 and Premiere elements 10 compatible with windows 8.1?

Is photoshop elements 10 and premiere elements 10 compatible with windows 8.1? I am upgrading from XP and am trying to determine if I should go to 8.1 or windows 7?

MakoM
Photoshop Elements 10 and Premiere Elements 10 are compatible with Windows 8 or 8.1 64 bit. I have them installed on those operating systems and no problems. My video card is Intel HD Graphics.
But, a major question is what video card will be used? There is a major issue with Premiere Elements 10 users whose computers use a NVIDIA GeForce video card. It is fixed by rolling back the driver to about May 2013. This is a user to user fix. Neither NVIDIA nor Adobe has offered one. Full details are the Announcement at the top of the Premiere Elements Forum
http://forums.adobe.com/community/premiere_elements?view=discussions
Overview of that situation
http://www.atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Please let us know if we can be of assistance in this matter.
Thank you.
ATR

Imac 27 in and bluetooth mouse and keyboard with windows

Similar Messages

Maybe you are looking for