Imac 27 runs hot as ****, won't sleep, and cpu runs wild in w7

I have been having audio issues with the imac 27. plugging headphones or speakers causes cpu to run crazy, the mic in the triband trrs jack does not work, and the imac runs hot, and will not go into power saver mode.
When I came in I found my nephew who was listening to some music on the imac, and I felt the back top of the imac and it was hot as ****. I almost burned my hand. I realized then that he had plugged his headphones in.
Unplugging the headphones or speakers can solve some of these problems.
But, this is not an acceptable fix.
Please contact Apple and urge them to fix these sound card issues.
If anyone does not have these problems in w7 with the imac 27 even after the latest bootcamp and imac updates, let us know right here. I think this affects every one of the late 2009 imacs and maybe some earlier ones too running windows 7.
Here's the post I recently ran on the headphone jack issue.
Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
Mac has a great reputation. I hope they remedy these problems right away.
Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
Thats it.
Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
Best to all!

Yes, I have been dealing with this problem since early January. I just can't believe that apple would not have the necessary driver for the sound card in the Imac 27! That's like trying to run a race and not bothering to tie your shoes! How can they not have something as basic as the sound connections working???
I was encouraged to buy a top of the line imac 27 because Apple had told us that bootcamp would enable Windows users to use the machine just as if it were a native windows machine, then they don't give us the **** drivers to use the trrs mic jack. And you can't use the external speakers without the cpu going wild and heating up like a pot bellied stove.
This is really disheartening and now I am really thinking I made a big mistake. I wouldn't mind migrating to Mac gradually, but I have lot of scientific and other programs that require windows. At this rate there will be thousands of other mac buyers who will never make the same mistake again.
As you can see I am quite angry about this, and getting more angry with each day Apple ignores every imac purchaser who expected to use Windows on the machine! Is the software for a sound card driver that difficult?
Having a computer which doesn't have sound that works correctly, is like having a car without seat, you can still drive it but isn't very **** comfortable.

Similar Messages

  • My iMac 27 2010 vintage goes to sleep and won't wake up...I have to push the on off button and hold till it shuts down and then re start...This is not good..Help please

    My mac iMac 27 2010 vintage goes to sleep and won't wake up till I hold the on off power button....Then I have to restart as it is locked up....This it intermittent..
    Help Please
    Jim

    Ops I replied to myself in error.....
    Tom:
    I performed the steps indicated but this morning when I clicked the mouse and hit the space key and clicked the track pad again as before nothing happens.
    I hold the power button for a few seconds and the screen fills as if the computer was normally awakened but it is locked up.
    Then I have to shut it down with the power button  and then power it up as a reboot.
    Not good...SMC reset didn't work....Throughout the day yesterday I put the computer to sleep and woke it up normally.  It seems to be a overnight problem.
    Am I going to have to shut it down everynight?
    Jim

  • Display won't sleep and screen saver won't sart

    I upgraded to the new OS and the display won't sleep and screen saver won't come on. Help please.

    Long shot.
    Do a backup.
    Quit the application.
    In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
    Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
    If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
    If you want to make your user library permanently visible, run the below command in Applications/Utilities/Terminal.
    chflags nohidden ~/Library/
    You will need to do that after any updates.

  • IMac won't sleep and freezes on shutdown

    My iMac has developed an annoying problem. Most nights, when I try to put the computer to sleep, it goes to sleep and the immediately wakes back up. I exit all programs running in the dock and try to sleep it again, but the same thing happens. I will then try to shut it down, but it freezes on the screen that shows the wheel with the lines (sorry for the bad description there). Any ideas?

    Here's more on sleep;
    This is for a Mac that won't sleep.
    Here is KB article HT1776 with their tips.
    Mine follow;
    USB devices and hubs often cause Macs to not sleep or wake quickly from sleep (notably HP printers and scanners, HP all in ones, and Cannon scanners). Disconnect all USB except for keyboard and mouse and try. If it sleeps, add one back at a time testing after each one to find the culprit.
    If you've set your Mac to receive faxes, it may not be able to sleep. It might also have a damaged preferences file.
    If you use your Mac for faxing, open System Preferences. click Print & Fax, click the Faxing tab, and uncheck the Receive Faxes On This Computer box.
    If that doesn't work or you've never faxed on your Mac, go to Finder/Hard Drive /Library/Preferences/SystemConfiguration and delete the com.apple.PowerManagement.plist and com..apple.AutoWake.plist files (if your Mac asks, type your admin. password).
    If the latter file isn't present in the folder, go to user name(probably your name)/Library/Preferences, delete the com.apple.systemuiserver.plist file, and reboot your Mac.
    Hope this helps!
    P.S. One member here reported this (Michael Gleason);
    "I have had this problem with my IMac G5. It is surprisingly irritating. LaCie's Silverkeeper backup software was the cause. By default it gave itself permission to wake up the computer to check if a backup was needed. Do you have this or a similar program installed which has scheduled activities including wake-up permissions as an option?"
    Dave Hamilton provided this link, xlr8yourmac.com, to a member, which addresses failure of deep sleep with some users that updated and added new FireWire and USB card.
    Also, here is Apple KB article TA2469 about PCI cards and sleep.
    tomhorvat adds this; After few days of messing around I found out that I had desktop background (wallpaper) set to change every 1 minute.
    After unchecking "Change picture..." in system preferences (under Desktop/Screen saver), my powerbook went to sleep all by itself.
    Tristan Currier noticed this; "I have a Canon printer(shared) and my imac would not sleep. I opened up printer/fax in system prefs and noticed it said the printer was in use when it was off. Opened up the printer queue and noticed about 7 pending documents. Deleted them all and now it sleeps.
    Check the printer queue!"
    Good Luck!  DALE

  • IMac Model 2012 makes restart after sleep and after shutdown ?!

    Hello Communities ,
    my iMac Model 2012 i5 / 16 Gb RAM , does not go shut down ! it makes a restart , the same when  it go to sleep ?
    When i shut down , the iMac goes down .... then ca. 10 sek. after them it starts self again !!!!
    What i have do :
    -    all power .pls   in Library deletet
    -     PRAM reset
    -     SMC reset
    -     all USB device plug out
    -     a new Admin account
    -     check filesystem
    -     start up in safe mode
    here .log file ....                                can anyone help me ?
    thx very much .... roger
    {\rtf1\ansi\ansicpg1252\cocoartf1187\cocoasubrtf390
    {\fonttbl\f0\fswiss\fcharset0 Helvetica;}
    {\colortbl;\red255\green255\blue255;}
    \paperw11900\paperh16840\margl1440\margr1440\vieww38300\viewh24840\viewkind0
    \pard\tx566\tx1133\tx1700\tx2267\tx2834\tx3401\tx3968\tx4535\tx5102\tx5669\tx623 6\tx6803\pardirnatural
    \f0\fs24 \cf0 14.07.13 17:27:49.000 syslogd[299]: --- syslogd restarted ---\
    14.07.13 17:27:49.444 com.apple.launchd[1]: (com.apple.aslmanager) Throttling respawn: Will start in 10 seconds\
    14.07.13 17:27:49.459 com.apple.launchd[1]: (com.apple.aslmanager) Throttling respawn: Will start in 10 seconds\
    14.07.13 17:27:49.545 com.apple.launchd[1]: (com.apple.aslmanager) Throttling respawn: Will start in 10 seconds\
    14.07.13 17:28:26.000 bootlog[0]: BOOT_TIME 1373815706 0\
    14.07.13 17:28:45.000 kernel[0]: PMAP: PCID enabled\
    14.07.13 17:28:45.000 kernel[0]: PMAP: Supervisor Mode Execute Protection enabled\
    14.07.13 17:28:45.000 kernel[0]: Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64\
    14.07.13 17:28:45.000 kernel[0]: vm_page_bootstrap: 3877659 free pages and 283877 wired pages\
    14.07.13 17:28:45.000 kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]\
    14.07.13 17:28:45.000 kernel[0]: zone leak detection enabled\
    14.07.13 17:28:45.000 kernel[0]: standard timeslicing quantum is 10000 us\
    14.07.13 17:28:45.000 kernel[0]: standard background quantum is 2500 us\
    14.07.13 17:28:45.000 kernel[0]: mig_table_max_displ = 74\
    14.07.13 17:28:45.000 kernel[0]: TSC Deadline Timer supported and enabled\
    14.07.13 17:28:45.000 kernel[0]: corecrypto kext started!\
    14.07.13 17:28:45.000 kernel[0]: Running kernel space in FIPS MODE\
    14.07.13 17:28:45.000 kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d\
    14.07.13 17:28:45.000 kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d\
    14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS integrity POST test passed!\
    14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!\
    14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!\
    14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!\
    14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!\
    14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS SHA POST test passed!\
    14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS HMAC POST test passed!\
    14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!\
    14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS DRBG POST test passed!\
    14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS POST passed!\
    14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled\
    14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled\
    14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled\
    14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled\
    14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled\
    14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled\
    14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled\
    14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled\
    14.07.13 17:28:45.000 kernel[0]: calling mpo_policy_init for TMSafetyNet\
    14.07.13 17:28:45.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)\
    14.07.13 17:28:45.000 kernel[0]: calling mpo_policy_init for Sandbox\
    14.07.13 17:28:45.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)\
    14.07.13 17:28:45.000 kernel[0]: calling mpo_policy_init for Quarantine\
    14.07.13 17:28:37.720 com.apple.launchd[1]: *** launchd[1] has started up. ***\
    14.07.13 17:28:45.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)\
    14.07.13 17:28:45.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993\
    14.07.13 17:28:45.000 kernel[0]: The Regents of the University of California. All rights reserved.\
    14.07.13 17:28:45.000 kernel[0]: MAC Framework successfully initialized\
    14.07.13 17:28:45.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers\
    14.07.13 17:28:45.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87\
    14.07.13 17:28:45.000 kernel[0]: ACPI: System State [S0 S3 S4 S5]\
    14.07.13 17:28:45.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 2344\
    14.07.13 17:28:45.000 kernel[0]: AppleIntelCPUPowerManagement: (built 12:18:39 Oct 18 2012) initialization complete\
    14.07.13 17:28:45.000 kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000\
    14.07.13 17:28:45.000 kernel[0]: [ PCI configuration begin ]\
    14.07.13 17:28:37.720 com.apple.launchd[1]: *** Shutdown logging is enabled. ***\
    14.07.13 17:28:45.000 kernel[0]: Sleep failure code 0x00000000 0x1f006700\
    14.07.13 17:28:45.000 kernel[0]: console relocated to 0xfc0020000\
    14.07.13 17:28:44.816 com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination\
    14.07.13 17:28:45.000 kernel[0]: PCI configuration changed (bridge=17 device=4 cardbus=0)\
    14.07.13 17:28:45.000 kernel[0]: [ PCI configuration end, bridges 13 devices 16 ]\
    14.07.13 17:28:45.000 kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management\
    14.07.13 17:28:45.000 kernel[0]: AppleThunderboltNHIType2::start - type 2 sleep enabled\
    14.07.13 17:28:45.000 kernel[0]: AppleThunderboltNHIType2::start - SXFP method found\
    14.07.13 17:28:45.000 kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]\
    14.07.13 17:28:45.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused\
    14.07.13 17:28:45.000 kernel[0]: rooting via boot-uuid from /chosen: FA41975F-8187-39BF-A050-6EA65F3EC755\
    14.07.13 17:28:45.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>\
    14.07.13 17:28:45.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start\
    14.07.13 17:28:45.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start\
    14.07.13 17:28:45.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded\
    14.07.13 17:28:45.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded\
    14.07.13 17:28:45.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready\
    14.07.13 17:28:45.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE HDD WDC WD10EALX-408EA0 Media/IOGUIDPartitionScheme/Customer@2\
    14.07.13 17:28:45.000 kernel[0]: BSD root: disk0s2, major 1, minor 2\
    14.07.13 17:28:45.000 kernel[0]: BTCOEXIST off \
    14.07.13 17:28:45.000 kernel[0]: BRCM tunables:\
    14.07.13 17:28:45.000 kernel[0]: pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]\
    14.07.13 17:28:45.000 kernel[0]: jnl: unknown-dev: replay_journal: from: 32392192 to: 41551360 (joffset 0x1d18000)\
    14.07.13 17:28:45.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0\
    14.07.13 17:28:45.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0\
    14.07.13 17:28:45.000 kernel[0]: jnl: unknown-dev: journal replay done.\
    14.07.13 17:28:45.000 kernel[0]: Kernel is LP64\
    14.07.13 17:28:45.000 kernel[0]: hfs: Removed 19 orphaned / unlinked files and 136 directories \
    14.07.13 17:28:48.000 kernel[0]: BCM5701Enet: Ethernet address 10:dd:b1:9f:be:37\
    14.07.13 17:28:48.000 kernel[0]: AirPort_Brcm4331: Ethernet address 8c:2d:aa:57:1a:eb\
    14.07.13 17:28:48.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification\
    14.07.13 17:28:48.000 kernel[0]: IO80211Interface::efiNVRAMPublished():  \
    14.07.13 17:28:50.614 hidd[49]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1\
    14.07.13 17:28:50.698 hidd[49]: void __IOHIDLoadBundles(): Loaded 0 HID plugins\
    14.07.13 17:28:51.022 fseventsd[50]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (679 25 725)\
    14.07.13 17:28:51.658 fseventsd[50]: log dir: /.fseventsd getting new uuid: FBF6F1D0-FD4C-43AB-ACCA-A2A33EF85E41\
    14.07.13 17:28:52.000 kernel[0]: macx_swapon SUCCESS\
    14.07.13 17:28:57.000 kernel[0]: Waiting for DSMOS...\
    14.07.13 17:28:58.508 appleeventsd[55]: main: Starting up\
    14.07.13 17:28:58.509 com.apple.SecurityServer[19]: Session 100000 created\
    14.07.13 17:28:58.708 coreservicesd[66]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false\
    14.07.13 17:28:58.000 kernel[0]: IOBluetoothUSBDFU::probe\
    14.07.13 17:28:58.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x828B FirmwareVersion - 0x0032\
    14.07.13 17:28:58.000 kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed\
    14.07.13 17:28:58.000 kernel[0]: NVDAStartup: Official\
    14.07.13 17:28:58.000 kernel[0]: Previous Shutdown Cause: -128\
    14.07.13 17:28:58.000 kernel[0]: NVDAGK100HAL loaded and registered\
    14.07.13 17:28:58.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification \
    14.07.13 17:28:58.000 kernel[0]: [IOBluetoothHCIController][start] -- completed\
    14.07.13 17:28:58.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService\
    14.07.13 17:28:58.000 kernel[0]: DSMOS has arrived\
    14.07.13 17:28:59.058 mDNSResponder[41]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12\
    14.07.13 17:28:59.231 airportd[70]: _processDLILEvent: en1 attached (down)\
    14.07.13 17:28:59.000 kernel[0]: createVirtIf(): ifRole = 1\
    14.07.13 17:28:59.000 kernel[0]: in func createVirtualInterface ifRole = 1\
    14.07.13 17:28:59.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff804e998000\
    14.07.13 17:28:59.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1\
    14.07.13 17:28:59.000 kernel[0]: Created virtif 0xffffff804e998000 p2p0\
    14.07.13 17:28:59.631 blued[58]: Read the UHE Info\
    14.07.13 17:28:59.631 blued[58]: Read version 2 info.  Number of devices:2\
    14.07.13 17:28:59.631 blued[58]: Class of device:     0x2580\
    14.07.13 17:28:59.631 blued[58]: Device name: 'Apple Magic Mouse' length:18\
    14.07.13 17:28:59.631 blued[58]: Finished reading the HID data\
    14.07.13 17:28:59.631 blued[58]: Found a device with PID:0x030d VID:0x05ac\
    14.07.13 17:28:59.733 blued[58]: Class of device:     0x2540\
    14.07.13 17:28:59.733 blued[58]: Device name: 'Apple Wireless Keyboard' length:24\
    14.07.13 17:28:59.733 blued[58]: Finished reading the HID data\
    14.07.13 17:28:59.733 blued[58]: Found a device with PID:0x0256 VID:0x05ac\
    14.07.13 17:29:00.000 kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).\
    14.07.13 17:29:00.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed\
    14.07.13 17:29:00.389 com.apple.usbmuxd[29]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit\
    14.07.13 17:29:00.521 configd[16]: network changed.\
    14.07.13 17:29:01.770 com.apple.SecurityServer[19]: Entering service\
    14.07.13 17:29:03.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,45e1,0000]\
    14.07.13 17:29:03.106 configd[16]: network changed: v6(en0+:fe80::de0b:1aff:fea8:5393) DNS* Proxy+ SMB\
    14.07.13 17:29:05.732 systemkeychain[76]: done file: /var/run/systemkeychaincheck.done\
    14.07.13 17:29:05.801 configd[16]: network changed: v6(en0:fe80::de0b:1aff:fea8:5393) DNS* Proxy SMB\
    14.07.13 17:29:06.157 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)\
    14.07.13 17:29:06.165 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)\
    14.07.13 17:29:06.343 mDNSResponder[41]: D2D_IPC: Loaded\
    14.07.13 17:29:06.343 mDNSResponder[41]: D2DInitialize succeeded\
    14.07.13 17:29:06.766 locationd[45]: NOTICE,Location icon should now be in state 0\
    14.07.13 17:29:07.000 kernel[0]: [BNBMouseDevice::init][75.19] init is complete\
    14.07.13 17:29:07.572 loginwindow[44]: Login Window Application Started\
    14.07.13 17:29:07.000 kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1\
    14.07.13 17:29:07.000 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered\
    14.07.13 17:29:07.758 stackshot[32]: Timed out waiting for IOKit to finish matching.\
    14.07.13 17:29:08.000 kernel[0]: [AppleMultitouchDevice::start] entered\
    14.07.13 17:29:09.000 kernel[0]: USBF:    42.955    AppleUSBHubPort: Port 2 of Hub at 0x1d181000 about to terminate a busy device (CompositeDevice) after waiting 10 seconds\
    14.07.13 17:29:10.349 netbiosd[74]: Unable to start NetBIOS name service: \
    14.07.13 17:29:10.648 digest-service[101]: label: default\
    14.07.13 17:29:10.649 digest-service[101]:     dbname: od:/Local/Default\
    14.07.13 17:29:10.649 digest-service[101]:     mkey_file: /var/db/krb5kdc/m-key\
    14.07.13 17:29:10.649 digest-service[101]:     acl_file: /var/db/krb5kdc/kadmind.acl\
    14.07.13 17:29:10.650 digest-service[101]: digest-request: uid=0\
    14.07.13 17:29:11.794 awacsd[59]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)\
    14.07.13 17:29:11.844 awacsd[59]: InnerStore CopyAllZones: no info in Dynamic Store\
    14.07.13 17:29:11.850 rpcsvchost[103]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded\
    14.07.13 17:29:11.854 digest-service[101]: digest-request: init request\
    14.07.13 17:29:11.914 digest-service[101]: digest-request: init return domain: BUILTIN server: LOCALHOST\
    14.07.13 17:29:12.705 com.apple.kextd[12]: Can't load /System/Library/Extensions/LogitechUSBHIDevices.kext - no code for running kernel's architecture.\
    14.07.13 17:29:12.706 com.apple.kextd[12]: Load com.Logitech.driver.HIDDevices failed; removing personalities from kernel.\
    14.07.13 17:29:13.000 kernel[0]: X86PlatformPlugin::setRingTable - No ring table found!\
    14.07.13 17:29:13.000 kernel[0]: X86PlatformPlugin::configResourceHandler - Failed to set ring table!\
    14.07.13 17:29:13.000 kernel[0]: [AGPM Controller] build GPUDict by Vendor10deDevice11a2\
    14.07.13 17:29:14.724 mds[40]: (Normal) FMW: FMW 0 0\
    14.07.13 17:29:14.790 WindowServer[95]: Server is starting up\
    14.07.13 17:29:15.252 WindowServer[95]: Session 256 retained (2 references)\
    14.07.13 17:29:15.252 WindowServer[95]: Session 256 released (1 references)\
    14.07.13 17:29:16.052 WindowServer[95]: Session 256 retained (2 references)\
    14.07.13 17:29:16.052 WindowServer[95]: init_page_flip: page flip mode is on\
    14.07.13 17:29:16.166 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)\
    14.07.13 17:29:16.838 WindowServer[95]: mux_initialize: Couldn't find any matches\
    14.07.13 17:29:16.936 WindowServer[95]: GLCompositor enabled for tile size [256 x 256]\
    14.07.13 17:29:16.936 WindowServer[95]: CGXGLInitMipMap: mip map mode is on\
    14.07.13 17:29:17.032 WindowServer[95]: WSMachineUsesNewStyleMirroring: true\
    14.07.13 17:29:17.033 WindowServer[95]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 42 modes available\
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0\
    UUID 0x000006100000b00500000000042c0140\
    14.07.13 17:29:17.033 WindowServer[95]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available\
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0\
    UUID 0xffffffffffffffffffffffff003f003e\
    14.07.13 17:29:17.033 WindowServer[95]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available\
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0\
    UUID 0xffffffffffffffffffffffff003f003d\
    14.07.13 17:29:17.038 WindowServer[95]: Created shield window 0x5 for display 0x042c0140\
    14.07.13 17:29:17.039 WindowServer[95]: Created shield window 0x6 for display 0x003f003e\
    14.07.13 17:29:17.039 WindowServer[95]: Created shield window 0x7 for display 0x003f003d\
    14.07.13 17:29:17.042 WindowServer[95]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 42 modes available\
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0\
    UUID 0x000006100000b00500000000042c0140\
    14.07.13 17:29:17.043 WindowServer[95]: Display 0x003f003e: GL mask 0x4; bounds (3584, 0)[1 x 1], 1 modes available\
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0\
    UUID 0xffffffffffffffffffffffff003f003e\
    14.07.13 17:29:17.043 WindowServer[95]: Display 0x003f003d: GL mask 0x2; bounds (3585, 0)[1 x 1], 1 modes available\
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0\
    UUID 0xffffffffffffffffffffffff003f003d\
    14.07.13 17:29:17.043 WindowServer[95]: CGXPerformInitialDisplayConfiguration\
    14.07.13 17:29:17.043 WindowServer[95]:   Display 0x042c0140: MappedDisplay Unit 0; Vendor 0x610 Model 0xb005 S/N 0 Dimensions 23.50 x 13.23; online enabled built-in, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1\
    14.07.13 17:29:17.043 WindowServer[95]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1\
    14.07.13 17:29:17.043 WindowServer[95]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1\
    14.07.13 17:29:17.699 configd[16]: network changed: v4(en0+:192.168.1.33) v6(en0!:fe80::de0b:1aff:fea8:5393) DNS+ Proxy SMB\
    14.07.13 17:29:17.842 WindowServer[95]: GLCompositor: GL renderer id 0x01022644, GL mask 0x00000007, accelerator 0x00003f9b, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB\
    14.07.13 17:29:17.855 WindowServer[95]: GLCompositor: GL renderer id 0x01022644, GL mask 0x00000007, texture units 8, texture max 16384, viewport max \{16384, 16384\}, extensions FPRG|NPOT|GLSL|FLOAT\
    14.07.13 17:29:17.884 loginwindow[44]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.\
    14.07.13 17:29:18.765 ntpd[97]: proto: precision = 1.000 usec\
    14.07.13 17:29:18.822 WindowServer[95]: Unable to open IOHIDSystem (e00002bd)\
    14.07.13 17:29:18.000 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)\
    14.07.13 17:29:19.470 WindowServer[95]: Created shield window 0x8 for display 0x042c0140\
    14.07.13 17:29:19.470 WindowServer[95]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
    14.07.13 17:29:19.488 launchctl[120]: com.apple.findmymacmessenger: Already loaded\
    14.07.13 17:29:19.662 com.apple.SecurityServer[19]: Session 100004 created\
    14.07.13 17:29:19.710 WindowServer[95]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.\
    14.07.13 17:29:19.804 WindowServer[95]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
    14.07.13 17:29:20.101 WindowServer[95]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
    14.07.13 17:29:20.334 com.apple.launchd[1]: (com.apple.xprotectupdater[26]) Exited with code: 252\
    14.07.13 17:29:21.493 coreaudiod[129]: Enabled automatic stack shots because audio IO is inactive\
    14.07.13 17:29:21.533 WindowServer[95]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042c0140 device: 0x10051f110  isBackBuffered: 1 numComp: 3 numDisp: 3\
    14.07.13 17:29:23.698 BezelServices 236.3[44]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)\
    14.07.13 17:29:25.074 hidd[49]: CGSShutdownServerConnections: Detaching application from window server\
    14.07.13 17:29:25.074 hidd[49]: CGSDisplayServerShutdown: Detaching display subsystem from window server\
    14.07.13 17:29:25.074 locationd[132]: NOTICE,Location icon should now be in state 0\
    14.07.13 17:29:25.182 UserEventAgent[121]: cannot find useragent 1102\
    14.07.13 17:29:25.332 loginwindow[44]: Login Window Started Security Agent\
    14.07.13 17:29:26.161 SecurityAgent[134]: This is the first run\
    14.07.13 17:29:26.162 SecurityAgent[134]: MacBuddy was run = 0\
    14.07.13 17:29:26.177 SecurityAgent[134]: User info context values set for kurt\
    14.07.13 17:29:27.516 awacsd[59]: Exiting\
    14.07.13 17:29:29.046 loginwindow[44]: Login Window - Returned from Security Agent\
    14.07.13 17:29:29.105 loginwindow[44]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102\
    14.07.13 17:29:29.127 loginwindow[44]: USER_PROCESS: 44 console\
    14.07.13 17:29:29.528 coreservicesd[66]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=108\
    14.07.13 17:29:29.548 com.apple.launchd[1]: (com.wacom.pentablet[126]) Exited with code: 255\
    14.07.13 17:29:29.593 com.apple.launchd.peruser.501[139]: (com.apple.gamed) Ignored this key: UserName\
    14.07.13 17:29:29.593 com.apple.launchd.peruser.501[139]: (com.apple.gamed) Ignored this key: GroupName\
    14.07.13 17:29:29.594 com.apple.launchd.peruser.501[139]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self\
    14.07.13 17:29:29.597 loginwindow[44]: Connection with distnoted server was invalidated\
    14.07.13 17:29:29.622 com.apple.launchd[1]: ([0x0-0x5005].com.wacom.Consumer_TouchDriver[138]) Exited with code: 255\
    14.07.13 17:29:29.624 distnoted[143]: # distnote server agent  absolute time: 63.250366578   civil time: Sun Jul 14 17:29:29 2013   pid: 143 uid: 501  root: no\
    14.07.13 17:29:30.353 WindowServer[95]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.\
    14.07.13 17:29:30.773 blued[58]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501\
    14.07.13 17:29:30.774 coreservicesd[66]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationBirth to notificationID=119\
    14.07.13 17:29:30.897 WindowServer[95]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
    14.07.13 17:29:31.101 com.apple.launchd.peruser.501[139]: (com.apple.afpstat-qfa[174]) Exited with code: 2\
    14.07.13 17:29:31.203 talagent[154]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m\
    14.07.13 17:29:31.203 talagent[154]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m\
    14.07.13 17:29:32.199 locationd[179]: NOTICE,Location icon should now be in state 0\
    14.07.13 17:29:32.345 apsd[175]: Couldn't change keychain information for default user: -25299\
    14.07.13 17:29:32.510 com.apple.launchd.peruser.501[139]: (com.apple.mrt.uiagent[164]) Exited with code: 255\
    14.07.13 17:29:32.591 NetworkBrowserAgent[186]: Starting NetworkBrowserAgent\
    14.07.13 17:29:32.998 WindowServer[95]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.\
    14.07.13 17:29:37.368 com.apple.SecurityServer[19]: Session 100005 created\
    14.07.13 17:29:39.787 WindowServer[95]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 7.79 seconds (server forcibly re-enabled them after 1.00 seconds)\
    14.07.13 17:29:49.093 com.apple.time[142]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).\
    14.07.13 17:29:49.116 genatsdb[202]: ########## genatsdb Sandboxed. ##########\
    14.07.13 17:29:49.348 com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[125]) Exit timeout elapsed (20 seconds). Killing\
    14.07.13 17:29:49.481 genatsdb[203]: ########## genatsdb Sandboxed. ##########\
    14.07.13 17:29:55.004 SyncServer[200]: [0x7fd2b1c1b9f0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.\
    14.07.13 17:29:56.000 kernel[0]: USBMSC Identifier (non-unique): KZGCAPH0951          0x5ac 0x1500 0x202\
    14.07.13 17:29:57.807 com.apple.time[142]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).\
    14.07.13 17:30:10.000 kernel[0]: jnl: disk1s3: replay_journal: from: 35868672 to: 35934208 (joffset 0x1d1f000)\
    14.07.13 17:30:10.000 kernel[0]: jnl: disk1s3: journal replay done.\
    14.07.13 17:30:10.000 kernel[0]: jnl: disk1s4: replay_journal: from: 36921344 to: 36995072 (joffset 0x1d1f000)\
    14.07.13 17:30:10.000 kernel[0]: jnl: disk1s4: journal replay done.\
    14.07.13 17:30:11.000 kernel[0]: jnl: disk1s5: replay_journal: from: 37044224 to: 37109760 (joffset 0x1d18000)\
    14.07.13 17:30:11.000 kernel[0]: jnl: disk1s5: journal replay done.\
    14.07.13 17:30:11.000 kernel[0]: jnl: disk1s2: replay_journal: from: 83034112 to: 83140608 (joffset 0x1d1f000)\
    14.07.13 17:30:12.000 kernel[0]: jnl: disk1s2: journal replay done.\
    14.07.13 17:30:24.629 coreaudiod[129]: Disabled automatic stack shots because audio IO is active\
    14.07.13 17:30:24.830 coreaudiod[129]: Enabled automatic stack shots because audio IO is inactive\
    14.07.13 17:30:27.137 genatsdb[203]: *GENATSDB* FontObjects generated = 656\
    14.07.13 17:30:28.991 genatsdb[202]: *GENATSDB* FontObjects generated = 633\
    14.07.13 17:30:50.048 com.apple.SecurityServer[19]: Session 100007 created\
    14.07.13 17:30:54.426 firefox-bin[254]: -_continuousScroll is deprecated for NSScrollWheel. Please use -hasPreciseScrollingDeltas.\
    14.07.13 17:30:54.426 firefox-bin[254]: -deviceDeltaY is deprecated for NSScrollWheel. Please use -scrollingDeltaY.\
    14.07.13 17:30:54.427 firefox-bin[254]: -deviceDeltaX is deprecated for NSScrollWheel. Please use -scrollingDeltaX.\
    14.07.13 17:30:54.000 kernel[0]: AppleBCM5701Ethernet:        0        1 BCM5701Enet::replaceOrCopyPacket worked after N tries\
    14.07.13 17:32:19.000 kernel[0]: considerRebuildOfPrelinkedKernel com.apple.driver.AudioAUUC triggered rebuild\
    14.07.13 17:32:24.148 com.apple.launchd.peruser.501[139]: ([0x0-0x25025].com.apple.installer[295]) Exited: Killed: 9\
    14.07.13 17:32:39.371 com.apple.launchd.peruser.501[139]: ([0x0-0x27027].com.apple.installer[298]) Exited: Killed: 9\
    14.07.13 17:32:43.992 coreaudiod[129]: Disabled automatic stack shots because audio IO is active\
    14.07.13 17:32:44.619 coreaudiod[129]: Enabled automatic stack shots because audio IO is inactive\
    14.07.13 17:32:45.069 coreaudiod[129]: Disabled automatic stack shots because audio IO is active\
    14.07.13 17:32:45.696 coreaudiod[129]: Enabled automatic stack shots because audio IO is inactive\
    14.07.13 17:33:30.546 com.apple.backupd[313]: Starting automatic backup\
    14.07.13 17:33:31.318 com.apple.backupd[313]: Backing up to: /Volumes/Time Machine/Backups.backupdb\
    14.07.13 17:33:32.254 com.apple.backupd[313]: Event store UUIDs don't match for volume: Macintosh HD\
    14.07.13 17:33:32.511 com.apple.backupd[313]: Deep event scan at path:/ reason:must scan subdirs|new event db|\
    14.07.13 17:34:09.502 coreaudiod[129]: Disabled automatic stack shots because audio IO is active\
    14.07.13 17:34:10.268 coreaudiod[129]: Enabled automatic stack shots because audio IO is inactive\
    14.07.13 17:34:13.596 Safari[316]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.\
    14.07.13 17:34:13.597 Safari[316]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.\
    14.07.13 17:34:13.597 Safari[316]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.\
    14.07.13 17:34:34.966 com.apple.backupd[313]: Finished scan\
    14.07.13 17:34:44.328 com.apple.backupd[313]: Found 728 files (41.1 MB) needing backup\
    14.07.13 17:34:44.509 com.apple.backupd[313]: 376.8 MB required (including padding), 837.3 GB available\
    14.07.13 17:34:45.009 WebProcess[318]: objc[318]: Object 0x7fdd1a42bf80 of class NSUserDefaults autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug\
    14.07.13 17:34:45.110 WebProcess[318]: objc[318]: Object 0x7fdd1a42bf80 of class NSUserDefaults autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug\
    14.07.13 17:34:46.236 CalendarAgent[171]: [com.apple.calendar.store.log.caldav.queue] [Account [email protected]@https://cal.me.com:8443/principals/users/1.1106928981/ timed out when executing operation: <CalDAVAccountRefreshQueueableOperation: 0x7fb09b4e2bb0; Sequence: 0>]\
    14.07.13 17:34:46.287 CalendarAgent[171]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1001 "Zeit\'fcberschreitung bei der Anforderung." UserInfo=0x7fb09c064200 \{NSUnderlyingError=0x7fb09c067100 "Zeit\'fcberschreitung bei der Anforderung.", NSErrorFailingURLStringKey=https://kurt.wyttenbach%[email protected]:8443/principals/users/1.1106928981///kurt.wyttenbach%[email protected]:8443/principals/users/1.1106928981/, NSErrorFailingURLKey=https://kurt.wyttenbach%[email protected]:8443/principals/users/1.1106928981///kurt.wyttenbach%[email protected]:8443/principals/users/1.1106928981/, [email protected], CalDAVErrFromRefresh=YES, NSLocalizedDescription=Zeit\'fcberschreitung bei der Anforderung.\}]\
    14.07.13 17:35:17.528 com.apple.backupd[313]: Copied 3507 files (40.2 MB) from volume Macintosh HD.\
    14.07.13 17:35:17.575 com.apple.backupd[313]: Using file event preflight for Macintosh HD\
    14.07.13 17:35:17.583 com.apple.backupd[313]: Will copy (189 KB) from Macintosh HD\
    14.07.13 17:35:17.584 com.apple.backupd[313]: Found 38 files (189 KB) needing backup\
    14.07.13 17:35:17.584 com.apple.backupd[313]: 327.7 MB required (including padding), 837.25 GB available\
    14.07.13 17:35:21.858 com.apple.backupd[313]: Copied 1007 files (190 KB) from volume Macintosh HD.\
    14.07.13 17:35:22.461 com.apple.backupd[313]: Created new backup: 2013-07-14-173521\
    14.07.13 17:35:23.524 com.apple.backupd[313]: Starting post-backup thinning\
    14.07.13 17:35:27.147 com.apple.backupd[313]: Deleted /Volumes/Time Machine/Backups.backupdb/Macintosh/2013-07-10-144448 (803 KB)\
    14.07.13 17:35:32.317 com.apple.backupd[313]: Deleted /Volumes/Time Machine/Backups.backupdb/Macintosh/2013-07-11-133335 (10.1 MB)\
    14.07.13 17:35:36.667 com.apple.backupd[313]: Deleted /Volumes/Time Machine/Backups.backupdb/Macintosh/2013-07-11-121821 (14.6 MB)\
    14.07.13 17:35:36.667 com.apple.backupd[313]: Post-back up thinning complete: 3 expired backups removed\
    14.07.13 17:35:36.721 com.apple.backupd[313]: Backup completed successfully.\
    14.07.13 17:36:35.643 WindowServer[95]: Created shield window 0x72 for display 0x042c0140\
    14.07.13 17:36:35.643 WindowServer[95]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x0(0)\
    14.07.13 17:36:35.651 WindowServer[95]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x0(0)\
    14.07.13 17:36:35.651 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fc678e09560> Sun Jul 14 18:29:10 2013 CEST (approx)\
    14.07.13 17:36:35.651 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fc678e09560> Sun Jul 14 18:29:10 2013 CEST (approx)\
    14.07.13 17:36:57.000 bootlog[0]: BOOT_TIME 1373816217 0\
    14.07.13 17:37:05.000 kernel[0]: PMAP: PCID enabled\
    14.07.13 17:37:05.000 kernel[0]: PMAP: Supervisor Mode Execute Protection enabled\
    14.07.13 17:37:05.000 kernel[0]: Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64\
    14.07.13 17:37:05.000 kernel[0]: vm_page_bootstrap: 3917120 free pages and 244416 wired pages\
    14.07.13 17:37:05.000 kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]\
    14.07.13 17:37:05.000 kernel[0]: zone leak detection enabled\
    14.07.13 17:37:05.000 kernel[0]: standard timeslicing quantum is 10000 us\
    14.07.13 17:37:05.000 kernel[0]: standard background quantum is 2500 us\
    14.07.13 17:37:05.000 kernel[0]: mig_table_max_displ = 74\
    14.07.13 17:37:05.000 kernel[0]: TSC Deadline Timer supported and enabled\
    14.07.13 17:37:05.000 kernel[0]: corecrypto kext started!\
    14.07.13 17:37:05.000 kernel[0]: Running kernel space in FIPS MODE\
    14.07.13 17:37:05.000 kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d\
    14.07.13 17:37:05.000 kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d\
    14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS integrity POST test passed!\
    14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!\
    14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!\
    14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!\
    14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!\
    14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS SHA POST test passed!\
    14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS HMAC POST test passed!\
    14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!\
    14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS DRBG POST test passed!\
    14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS POST passed!\
    14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled\
    14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled\
    14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled\
    14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled\
    14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled\
    14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled\
    14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled\
    14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled\
    14.07.13 17:37:05.000 kernel[0]: calling mpo_policy_init for TMSafetyNet\
    14.07.13 17:37:05.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)\
    14.07.13 17:37:05.000 kernel[0]: calling mpo_policy_init for Sandbox\
    14.07.13 17:37:05.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)\
    14.07.13 17:37:05.000 kernel[0]: calling mpo_policy_init for Quarantine\
    14.07.13 17:37:05.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)\
    14.07.13 17:37:05.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993\
    14.07.13 17:37:05.000 kernel[0]: The Regents of the University of California. All rights reserved.\
    14.07.13 17:37:05.000 kernel[0]: MAC Framework successfully initialized\
    14.07.13 17:37:05.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers\
    14.07.13 17:37:05.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87\
    14.07.13 17:37:05.000 kernel[0]: ACPI: System State [S0 S3 S4 S5]\
    14.07.13 17:37:05.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 2344\
    14.07.13 17:37:05.000 kernel[0]: AppleIntelCPUPowerManagement: (built 12:18:39 Oct 18 2012) initialization complete\
    14.07.13 17:37:05.000 kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000\
    14.07.13 17:37:05.000 kernel[0]: [ PCI configuration begin ]\
    14.07.13 17:37:05.000 kernel[0]: Sleep failure code 0x00000000 0x1f006600\
    14.07.13 17:37:05.000 kernel[0]: console relocated to 0xfc0020000\
    14.07.13 17:37:05.000 kernel[0]: PCI configuration changed (bridge=17 device=4 cardbus=0)\
    14.07.13 17:37:05.000 kernel[0]: [ PCI configuration end, bridges 13 devices 16 ]\
    14.07.13 17:37:05.000 kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management\
    14.07.13 17:37:05.000 kernel[0]: AppleThunderboltNHIType2::start - type 2 sleep enabled\
    14.07.13 17:37:05.000 kernel[0]: AppleThunderboltNHIType2::start - SXFP method found\
    14.07.13 17:37:05.000 kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]\
    14.07.13 17:37:05.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused\
    14.07.13 17:37:05.000 kernel[0]: rooting via boot-uuid from /chosen: FA41975F-8187-39BF-A050-6EA65F3EC755\
    14.07.13 17:37:05.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>\
    14.07.13 17:37:05.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start\
    14.07.13 17:37:05.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start\
    14.07.13 17:37:05.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded\
    14.07.13 17:37:05.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded\
    14.07.13 17:37:05.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready\
    14.07.13 17:37:05.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE HDD WDC WD10EALX-408EA0 Media/IOGUIDPartitionScheme/Customer@2\
    14.07.13 17:37:05.000 kernel[0]: BSD root: disk0s2, major 1, minor 2\
    14.07.13 17:37:05.000 kernel[0]: BTCOEXIST off \
    14.07.13 17:37:05.000 kernel[0]: BRCM tunables:\
    14.07.13 17:37:05.000 kernel[0]: pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]\
    14.07.13 17:37:05.000 kernel[0]: jnl: unknown-dev: replay_journal: from: 11534848 to: 15105536 (joffset 0x1d18000)\
    14.07.13 17:37:05.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0\
    14.07.13 17:37:05.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0\
    14.07.13 17:37:05.000 kernel[0]: USBMSC Identifier (non-unique): KZGCAPH0951          0x5ac 0x1500 0x202\
    14.07.13 17:37:05.000 kernel[0]: jnl: unknown-dev: journal replay done.\
    14.07.13 17:37:05.000 kernel[0]: Kernel is LP64\
    14.07.13 17:37:05.000 kernel[0]: hfs: Removed 10 orphaned / unlinked files and 31 directories \
    14.07.13 17:37:00.744 com.apple.launchd[1]: *** launchd[1] has started up. ***\
    14.07.13 17:37:00.744 com.apple.launchd[1]: *** Shutdown logging is enabled. ***\
    14.07.13 17:37:05.106 com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination\
    14.07.13 17:37:05.000 kernel[0]: BCM5701Enet: Ethernet address 10:dd:b1:9f:be:37\
    14.07.13 17:37:05.000 kernel[0]: AirPort_Brcm4331: Ethernet address 8c:2d:aa:57:1a:eb\
    14.07.13 17:37:05.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification\
    14.07.13 17:37:05.000 kernel[0]: IO80211Interface::efiNVRAMPublished():  \
    14.07.13 17:37:10.229 hidd[49]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1\
    14.07.13 17:37:10.231 hidd[49]: void __IOHIDLoadBundles(): Loaded 0 HID plugins\
    14.07.13 17:37:10.241 fseventsd[50]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (464 13 499)\
    14.07.13 17:37:10.241 fseventsd[50]: log dir: /.fseventsd getting new uuid: 6B676697-3A0C-4445-9059-FE1886DE3608\
    14.07.13 17:37:10.000 kernel[0]: macx_swapon SUCCESS\
    14.07.13 17:37:10.000 kernel[0]: Waiting for DSMOS...\
    14.07.13 17:37:15.026 coreservicesd[65]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false\
    14.07.13 17:37:15.047 mDNSResponder[41]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12\
    14.07.13 17:37:15.050 airportd[71]: _processDLILEvent: en1 attached (down)\
    14.07.13 17:37:15.000 kernel[0]: createVirtIf(): ifRole = 1\
    14.07.13 17:37:15.000 kernel[0]: in func createVirtualInterface ifRole = 1\
    14.07.13 17:37:15.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff80449cb400\
    14.07.13 17:37:15.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1\
    14.07.13 17:37:15.000 kernel[0]: Created virtif 0xffffff80449cb400 p2p0\
    14.07.13 17:37:15.148 com.apple.SecurityServer[16]: Session 100000 created\
    14.07.13 17:37:15.149 blued[58]: Read the UHE Info\
    14.07.13 17:37:15.149 blued[58]: Read version 2 info.  Number of devices:2\
    14.07.13 17:37:15.149 blued[58]: Class of device:     0x2580\
    14.07.13 17:37:15.150 blued[58]: Device name: 'Apple Magic Mouse' length:18\
    14.07.13 17:37:15.150 blued[58]: Finished reading the HID data\
    14.07.13 17:37:15.150 blued[58]: Found a device with PID:0x030d VID:0x05ac\
    14.07.13 17:37:15.151 blued[58]: Class of device:     0x2540\
    14.07.13 17:37:15.151 blued[58]: Device name: 'Apple Wireless Keyboard' length:24\
    14.07.13 17:37:15.151 blued[58]: Finished reading the HID data\
    14.07.13 17:37:15.151 blued[58]: Found a device with PID:0x0256 VID:0x05ac\
    14.07.13 17:37:15.207 com.apple.kextd[12]: Can't load /System/Library/Extensions/LogitechUSBHIDevices.kext - no code for running kernel's architecture.\
    14.07.13 17:37:15.208 com.apple.kextd[12]: Load com.Logitech.driver.HIDDevices failed; removing personalities from kernel.\
    14.07.13 17:37:15.000 kernel[0]: NVDAStartup: Official\
    14.07.13 17:37:15.000 kernel[0]: [IOBluetoothHCIController][start] -- completed\
    14.07.13 17:37:15.000 kernel[0]: NVDAGK100HAL loaded and registered\
    14.07.13 17:37:15.000 kernel[0]: IOBluetoothUSBDFU::probe\
    14.07.13 17:37:15.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x828B FirmwareVersion - 0x0032\
    14.07.13 17:37:15.000 kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed\
    14.07.13 17:37:15.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification \
    14.07.13 17:37:15.000 kernel[0]: Previous Shutdown Cause: -128\
    14.07.13 17:37:15.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService\
    14.07.13 17:37:15.000 kernel[0]: DSMOS has arrived\
    14.07.13 17:37:15.224 mds[40]: (Normal) FMW: FMW 0 0\
    14.07.13 17:37:15.381 appleeventsd[55]: main: Starting up\
    14.07.13 17:37:15.388 com.apple.usbmuxd[29]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit\
    14.07.13 17:37:15.943 WindowServer[81]: Server is starting up\
    14.07.13 17:37:15.945 configd[17]: network changed.\
    14.07.13 17:37:15.000 kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).\
    14.07.13 17:37:15.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed\
    14.07.13 17:37:16.000 kernel[0]: X86PlatformPlugin::setRingTable - No ring table found!\
    14.07.13 17:37:16.000 kernel[0]: X86PlatformPlugin::configResourceHandler - Failed to set ring table!\
    14.07.13 17:37:16.000 kernel[0]: [AGPM Controller] build GPUDict by Vendor10deDevice11a2\
    14.07.13 17:37:16.315 com.apple.SecurityServer[16]: Entering service\
    14.07.13 17:37:16.404 UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL\
    14.07.13 17:37:16.470 systemkeychain[92]: done file: /var/run/systemkeychaincheck.done\
    14.07.13 17:37:16.516 loginwindow[44]: Login Window Application Started\
    14.07.13 17:37:16.544 netbiosd[89]: Unable to start NetBIOS name service: \
    14.07.13 17:37:16.554 awacsd[59]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)\
    14.07.13 17:37:16.570 awacsd[59]: InnerStore CopyAllZones: no info in Dynamic Store\
    14.07.13 17:37:16.606 digest-service[113]: label: default\
    14.07.13 17:37:16.606 digest-service[113]:     dbname: od:/Local/Default\
    14.07.13 17:37:16.606 digest-service[113]:     mkey_file: /var/db/krb5kdc/m-key\
    14.07.13 17:37:16.606 digest-service[113]:     acl_file: /var/db/krb5kdc/kadmind.acl\
    14.07.13 17:37:16.608 digest-service[113]: digest-request: uid=0\
    14.07.13 17:37:16.636 rpcsvchost[115]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded\
    14.07.13 17:37:16.639 digest-service[113]: digest-request: init request\
    14.07.13 17:37:16.643 digest-service[113]: digest-request: init return domain: BUILTIN server: LOCALHOST\
    14.07.13 17:37:16.740 WindowServer[81]: Session 256 retained (2 references)\
    14.07.13 17:37:16.740 WindowServer[81]: Session 256 released (1 references)\
    14.07.13 17:37:16.760 WindowServer[81]: Session 256 retained (2 references)\
    14.07.13 17:37:16.760 WindowServer[81]: init_page_flip: page flip mode is on\
    14.07.13 17:37:16.915 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)\
    14.07.13 17:37:16.915 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)\
    14.07.13 17:37:17.347 WindowServer[81]: mux_initialize: Couldn't find any matches\
    14.07.13 17:37:17.359 WindowServer[81]: GLCompositor enabled for tile size [256 x 256]\
    14.07.13 17:37:17.359 WindowServer[81]: CGXGLInitMipMap: mip map mode is on\
    14.07.13 17:37:17.425 WindowServer[81]: WSMachineUsesNewStyleMirroring: true\
    14.07.13 17:37:17.425 WindowServer[81]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 42 modes available\
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0\
    UUID 0x000006100000b00500000000042c0140\
    14.07.13 17:37:17.426 WindowServer[81]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available\
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0\
    UUID 0xffffffffffffffffffffffff003f003e\
    14.07.13 17:37:17.426 WindowServer[81]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available\
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0\
    UUID 0xffffffffffffffffffffffff003f003d\
    14.07.13 17:37:17.431 WindowServer[81]: Created shield window 0x5 for display 0x042c0140\
    14.07.13 17:37:17.432 WindowServer[81]: Created shield window 0x6 for display 0x003f003e\
    14.07.13 17:37:17.432 WindowServer[81]: Created shield window 0x7 for display 0x003f003d\
    14.07.13 17:37:17.433 WindowServer[81]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 42 modes available\
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0\
    UUID 0x000006100000b00500000000042c0140\
    14.07.13 17:37:17.433 WindowServer[81]: Display 0x003f003e: GL mask 0x4; bounds (3584, 0)[1 x 1], 1 modes available\
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0\
    UUID 0xffffffffffffffffffffffff003f003e\
    14.07.13 17:37:17.433 WindowServer[81]: Display 0x003f003d: GL mask 0x2; bounds (3585, 0)[1 x 1], 1 modes available\
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0\
    UUID 0xffffffffffffffffffffffff003f003d\
    14.07.13 17:37:17.434 WindowServer[81]: CGXPerformInitialDisplayConfiguration\
    14.07.13 17:37:17.434 WindowServer[81]:   Display 0x042c0140: MappedDisplay Unit 0; Vendor 0x610 Model 0xb005 S/N 0 Dimensions 23.50 x 13.23; online enabled built-in, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1\
    14.07.13 17:37:17.434 WindowServer[81]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1\
    14.07.13 17:37:17.434 WindowServer[81]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1\
    14.07.13 17:37:17.503 WindowServer[81]: GLCompositor: GL renderer id 0x01022644, GL mask 0x00000007, accelerator 0x0000409b, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB\
    14.07.13 17:37:17.508 WindowServer[81]: GLCompositor: GL renderer id 0x01022644, GL mask 0x00000007, texture units 8, texture max 16384, viewport max \{16384, 16384\}, extensions FPRG|NPOT|GLSL|FLOAT\
    14.07.13 17:37:17.511 loginwindow[44]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.\
    14.07.13 17:37:17.524 WindowServer[81]: Unable to open IOHIDSystem (e00002bd)\
    14.07.13 17:37:17.000 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)\
    14.07.13 17:37:18.109 WindowServer[81]: Created shield window 0x8 for display 0x042c0140\
    14.07.13 17:37:18.109 WindowServer[81]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
    14.07.13 17:37:18.143 launchctl[128]: com.apple.findmymacmessenger: Already loaded\
    14.07.13 17:37:18.174 com.apple.SecurityServer[16]: Session 100004 created\
    14.07.13 17:37:18.212 hidd[49]: CGSShutdownServerConnections: Detaching application from window server\
    14.07.13 17:37:18.212 hidd[49]: CGSDisplayServerShutdown: Detaching display subsystem from window server\
    14.07.13 17:37:18.234 loginwindow[44]: Login Window Started Security Agent\
    14.07.13 17:37:18.324 SecurityAgent[137]: This is the first run\
    14.07.13 17:37:18.325 SecurityAgent[137]: MacBuddy was run = 0\
    14.07.13 17:37:18.000 kernel[0]: [BNBMouseDevice::init][75.19] init is complete\
    14.07.13 17:37:18.343 WindowServer[81]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042c0140 device: 0x104561110  isBackBuffered: 1 numComp: 3 numDisp: 3\
    14.07.13 17:37:18.343 SecurityAgent[137]: User info context values set for kurt\
    14.07.13 17:37:18.367 coreaudiod[138]: Enabled automatic stack shots because audio IO is inactive\
    14.07.13 17:37:18.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,45e1,0000]\
    14.07.13 17:37:18.477 configd[17]: network changed: v6(en0+:fe80::de0b:1aff:fea8:5393) DNS* Proxy+ SMB\
    14.07.13 17:37:18.000 kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1\
    14.07.13 17:37:18.000 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered\
    14.07.13 17:37:19.017 loginwindow[44]: Login Window - Returned from Security Agent\
    14.07.13 17:37:19.023 loginwindow[44]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102\
    14.07.13 17:37:19.040 loginwindow[44]: USER_PROCESS: 44 console\
    14.07.13 17:37:19.404 com.apple.launchd.peruser.501[143]: (com.apple.gamed) Ignored this key: UserName\
    14.07.13 17:37:19.404 com.apple.launchd.peruser.501[143]: (com.apple.gamed) Ignored this key: GroupName\
    14.07.13 17:37:19.404 com.apple.launchd.peruser.501[143]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self\
    14.07.13 17:37:19.408 loginwindow[44]: Connection with distnoted server was invalidated\
    14.07.13 17:37:19.431 distnoted[147]: # distnote server agent  absolute time: 22.728758230   civil time: Sun Jul 14 17:37:19 2013   pid: 147 uid: 501  root: no\
    14.07.13 17:37:19.432 WindowServer[81]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.\
    14.07.13 17:37:19.436 coreservicesd[65]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=113\
    14.07.13 17:37:19.438 com.apple.launchd[1]: (com.wacom.pentablet[134]) Exited with code: 255\
    14.07.13 17:37:19.000 kernel[0]: [AppleMultitouchDevice::start] entered\
    14.07.13 17:37:19.543 blued[58]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501\
    14.07.13 17:37:19.804 WindowServer[81]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
    14.07.13 17:37:19.828 WindowServer[81]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
    14.07.13 17:37:20.559 configd[17]: network changed: v6(en0:fe80::de0b:1aff:fea8:5393) DNS* Proxy SMB\
    14.07.13 17:37:20.619 mDNSResponder[41]: D2D_IPC: Loaded\
    14.07.13 17:37:20.619 mDNSResponder[41]: D2DInitialize succeeded\
    14.07.13 17:37:20.666 locationd[45]: NOTICE,Location icon should now be in state 0\
    14.07.13 17:37:23.690 configd[17]: network changed: v4(en0+:192.168.1.33) v6(en0!:fe80::de0b:1aff:fea8:5393) DNS+ Proxy SMB\
    14.07.13 17:37:23.803 ntpd[109]: proto: precision = 1.000 usec\
    14.07.13 17:37:24.518 locationd[164]: NOTICE,Location icon should now be in state 0\
    14.07.13 17:37:25.894 com.apple.SecurityServer[16]: Session 100005 created\
    14.07.13 17:37:25.963 mds[40]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"\
    14.07.13 17:37:25.964 mds[40]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"\
    14.07.13 17:37:25.973 apsd[61]: Couldn't change keychain information for default user: -25299\
    14.07.13 17:37:26.575 com.apple.launchd[1]: (com.apple.xprotectupdater[26]) Exited with code: 252\
    14.07.13 17:37:31.570 awacsd[59]: Exiting\
    14.07.13 17:37:32.942 WindowServer[81]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.\
    14.07.13 17:37:32.978 WindowServer[81]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
    14.07.13 17:37:33.073 BezelServices 236.3[44]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)\
    14.07.13 17:37:33.277 NetworkBrowserAgent[185]: Starting NetworkBrowserAgent\
    14.07.13 17:37:33.316 talagent[176]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m\
    14.07.13 17:37:33.316 talagent[176]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m\
    14.07.13 17:37:33.000 kernel[0]: jnl: disk1s2: replay_journal: from: 46989312 to: 61497344 (joffset 0x1d1f000)\
    14.07.13 17:37:36.368 talagent[176]: CGSGetOnScreenWindowList: Invalid connection\
    14.07.13 17:37:36.368 coreservicesd[65]: Can't change an application into stopped state for app App:"Safari" [ 0x0/0x7007]  @ 0x0x7fc899b06030 because it's already been started.\
    14.07.13 17:37:37.308 WindowServer[81]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.\
    14.07.13 17:37:37.733 WindowServer[81]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.43 seconds (server forcibly re-enabled them after 1.00 seconds)\
    14.07.13 17:37:39.381 com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[133]) Exit timeout elapsed (20 seconds). Killing\
    14.07.13 17:37:41.000 kernel[0]: jnl: disk1s2: journal replay done.\
    14.07.13 17:37:42.000 kernel[0]: hfs: Removed 0 orphaned / unlinked files and 187 directories \
    14.07.13 17:37:42.090 fseventsd[50]: event logs in /Volumes/Time Machine/.fseventsd out of sync with volume.  destroying old logs. (3428 9 3429)\
    14.07.13 17:37:42.097 fseventsd[50]: log dir: /Volumes/Time Machine/.fseventsd getting new uuid: 3F58FA72-0AA8-4ECC-89C5-B97788DD1AA0\
    14.07.13 17:37:42.425 coreservicesd[65]: Can't change an application into stopped state for app App:"Finder" [ 0x0/0xc00c]  @ 0x0x7fc89990e0d0 because it's already been started.\
    14.07.13 17:37:42.000 kernel[0]: jnl: disk1s3: replay_journal: from: 35934208 to: 36024320 (joffset 0x1d1f000)\
    14.07.13 17:37:43.000 kernel[0]: jnl: disk1s3: journal replay done.\
    14.07.13 17:37:44.326 WindowServer[81]: CGXDisableUpdate: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.\
    14.07.13 17:37:45.242 fseventsd[50]: event logs in /Volumes/TB 2/.fseventsd out of sync with volume.  destroying old logs. (3337 3 3432)\
    14.07.13 17:37:45.262 fseventsd[50]: log dir: /Volumes/TB 2/.fseventsd getting new uuid: C8782414-AB4E-4C53-95EC-4B1B2FD2ED51\
    14.07.13 17:37:45.000 kernel[0]: jnl: disk1s4: replay_journal: from: 36995072 to: 37093376 (joffset 0x1d1f000)\
    14.07.13 17:37:46.660 WindowServer[81]: reenable_update_for_connection: UI updates were finally reenabled by application "Safari" after 3.33 seconds (server forcibly re-enabled them after 1.00 seconds)\
    14.07.13 17:37:47.300 com.apple.launchd.peruser.501[143]: (com.apple.afpstat-qfa[234]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory\
    14.07.13 17:37:47.300 com.apple.launchd.peruser.501[143]: (com.apple.afpstat-qfa[234]) Job failed to exec(3) for weird reason: 2\
    14.07.13 17:37:47.000 kernel[0]: jnl: disk1s4: journal replay done.\
    14.07.13 17:37:49.320 WindowServer[81]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.\
    14.07.13 17:37:49.362 com.apple.time[146]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).\
    14.07.13 17:37:49.507 WindowServer[81]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 1.19 seconds (server forcibly re-enabled them after 1.00 seconds)\
    14.07.13 17:37:49.527 com.apple.launchd.peruser.501[143]: (com.apple.mrt.uiagent[225]) Exited with code: 255\
    14.07.13 17:37:50.018 fseventsd[50]: event logs in /Volumes/TB 3/.fseventsd out of sync with volume.  destroying old logs. (3338 5 3437)\
    14.07.13 17:37:50.108 DictationIM[216]: Exception in proxy <IMKTextInput> respondsToSelector: inputSessionDoneSleep\
        name = NSPortTimeoutException\
        reason = connection timeout: did not receive reply\
        userInfo = (null)\
    0   CoreFoundation                      0x0000000109fa2b06 __exceptionPreprocess + 198\
    1   libobjc.A.dylib                     0x0000000109ddd3f0 objc_exception_throw + 43\
    2   CoreFoundation                      0x0000

    Same problem, my brand new iMac (27inch 2011 SSD OS X 10.6.8) comes out of sleep and after a few seconds it looks like it cannot write to disk anymore. Programs that are open can still be accessed, however once they need to log or write something to disk the system freezes.
    Tried the following:
    Thunderbolt 27/06 firmware upgrade
    SMC and PRAM reset
    Extended hardware test -> everything OK
    Created new user to see if it is a cache issue that coming from my Time Machine restore from my old iMac
    Keyboard and Magic mouse from my old iMac
    Nothing helped, so I'm becoming desperate. I suspect an SSD drive issue however cannot find any error in the logs.
    Rgds,
    Zwiri

  • Why is my mac-pro ci7 running hot while working with imovie and eyetv?

    Hello,
    I am creating short videos of ps-3 gameplays. For recording I use eye-tv and my mac is connected through a HD-Haupauge with my Playstation. When transferring the recording-file from eye-tv to i-movie and getting started to work on the video, my mac runs hot. I have to underpin the mac, so that there is enough space for cooling, which doesn't help that much.
    What could be the reason? I bought themac last year in summer. I am not sure about my operation systems number.
    Thanks for any reply and good advice i hope to get.
    Kind regards

    You posted your question in the "Intel iMac" Forum.  In order to get a relevant answer you should repost it in the "Mac Pro" Forum

  • Many problems. Programs won't mount and fan runs a lot

    Ever since I installed my Ipod shuffle I have had all kinds of problems. I doubt that has anything to do with it. Sometimes my computer will go to sleep and the fan will just run like crazy. The computer won't wake up. The only way is to reboot. I also have a problem with programs not opening but in the program bar they have the arrow. Then they won't close unless I reboot. The other problem is that downloaded programs won't mount and therefore won't open. When I double click it says program failed to mount? Any ideas?
    Jason

    Before doing an Archive and Install as MGW suggested, I would try the following first:
    Except for your keyboard & mouse, disconnect all devices from your computer...........
    Run disk repair & permissions directly from your Tiger DVD.
    I would also suggest that you consider updating your OS & updating and/or downloading anything else your computer needs by using your Software Update control panel.
    If you do the above, you will need to repair permissions after each installation.
    By any chance do you have DiskWarrior, Techtool Pro or Drive Genius?
    "Apple has been no help with anything with this computer. The little ball on the mighty mouse broke after a week of use and they wouldn't do anything about it."
    I'm sorry but, I find this hard to believe. Like MGW already stated, Apple should have offered you a replacement as you were entitled to one under your "standard" one year warranty with Apple.

  • IBk G4 won't sleep automatically while running on power adapter

    I have suddenly developed this odd issue. My iBook sleeps fine when I shut the lid, both when running on adapter and on battery. And when I go up to the menu & tell it to sleep it will sleep (for both) as well. It just won't go to sleep on it's own while running off the adapter (I've tested it, and it does sleep on it's own when running on battery). I've repaired permissions & restarted, repairing again but this doesn't seem to help. I saw someone mention looking in the activity manager area for printer mentions but I don't think this would be the problem since it is fine off the battery? Not a big deal really, but wondering what would cause this! Thx for any ideas!

    I have repaired permissions & restarted a few times, without any change.
    I just looked at my activity monitor. There are many things listed ... this is not something I'm familiar with looking at! Some of the list I know right away what things are, and some I have no idea! But, if it sleeps correctly when running on battery but not AC, would it have to do what is listed on Activity Monitor? My guess is perhaps not? Maybe I need to zap the RRAM? But like the poster above me said about his, it's an old iBook and not really a big deal, I can tell it to sleep!

  • My MacBook won't sleep and I'm forced to reboot...

    For the past two weeks, every other time I close my MacBook it will either sleep or it will not sleep. When it won't sleep, the light on the apple turns off but the little indicator light stays on and I can hear the fans whirring. When it stays on instead of sleeping, the screen is frozen and black and I'm forced to turn the power off then turn it back on. I've tried a few things including taking the battery out and holding down the power button but nothing seems to be working. My nearest Apple approved service provider is about an hour away and I don't mind taking it but if I can fix it without making the drive that would be awesome. If there are some specific things you need to find out my computer let me know and I'll fill you in. Any help would be very much appreciated.

    Failure to sleep can be caused by hardware or software. To troubleshoot the problem you'll want to make sure nothing is connected to the computer but the power adapter since a USB or FireWire device might be the cause. Your computer came with a hardware diagnostic disc - either it is part of your installation DVD or it is a separate disc. Boot up with that disc and let it run. If it shows a problem you know you need to make a trip to the shop. If not, we can't positively eliminate hardware but we'll move on.
    You'll need to create a new user account, after which you should shut down the computer and then restart and log in directly to the new account. This will eliminate any start-up items that might be causing the problem as well as any munged preferences that might be the cause.
    If the computer continues to show shutdown issues you'll want to look at: 1) 3rd party drivers such as all-in-one printers and scanners - uninstall, restart and try again, 2) RAM upgrades - remove and try again, 3) an OS reinstall (which I've saved for next to last), 4) computer hardware. If you get to the OS reinstall, I'd recommend that you fully back up the computer and then erase the hard drive, reinstall the OS, and immediately try sleeping the computer.
    Shutdown and wakeup issues are the two problems I hate dealing with most.

  • My iMac (10.6.8) goes to sleep and will not wake up without a hard reboot.

    My iMac (10.6.8) goes to sleep after 2 or 3 hours (even if im working at the time) and will not wake up without a hard reboot. 
    Any suggestions would be very much appreciated.

    What all USB or Firewire devices do you have connected?
    Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if sleep/wake works OK in Safe Mode.
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
    next...
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • MBP won't sleep, HDD constantly running (clicking), even with no programs open

    When I close the lid on my Mac at night it doesn't sleep, and I can hear the HDD quietly chattering away. Even when I'm using it during the day I can similarly hear the HDD going, even if I'm just using MS Word, Safari and Itunes - I'm a student, so my day-to-day needs don't really push my Mac that hard!
    The only thing I'm worried about is if it's going to knacker the HDD if it's running 24 hours a day. Am I just being paranoid, or is it something I should chase?
    It only really started happening after I bought an external HDD to use as a time capsule. I never really have it connected though, except when I back up once a week. It's a Samsung 1TB Seagate. Any Ideas?

    Try a PRAM reset:
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Excerpt from: http://support.apple.com/kb/HT1379

  • Macbook Pro fan running constantly and CPU running slow

    So, I have a Macbook Pro 2010 2.3 i7 that has started running really slow and the fan is running constantly.
    In activity monitor it shows a kernel_task running constantly at around or above 200%.
    I have tried all the regular tasks.  PRam reset, SMC reset and nothing seems to fix it.
    I have also tried a system reinstall to no avail.
    Maybe I'm on the wrong track, but from what I have read, the kernel_task might be trying to slow my CPU down because it thinks it is being overworked?
    Maybe the fans are also being activated because it thinks the computer is too hot?
    Anyway, if anyone has any idea as to what I can do to figure out what is going on, let me know.  Thanks

    Here is the EtreCheck results:
    Problem description:
    fans running constantly and CPU slowing down
    EtreCheck version: 2.2 (132)
    Report generated 4/28/15 7:42 AM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    The following internal tasks failed to complete:
    /usr/sbin/system_profiler -xml SPFontsDataType
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro6,2
        1 2.66 GHz Intel Core i7 CPU: 2-core
        8 GB RAM
            BANK 0/DIMM0
                4 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery: Health = Normal - Cycle count = 141 - SN = W0020PTD7BWZA
    Video Information: ℹ️
        Intel HD Graphics - VRAM: 288 MB
        NVIDIA GeForce GT 330M - VRAM: 512 MB
            Color LCD 1440 x 900
    System Software: ℹ️
        OS X 10.8.5 (12F45) - Time since boot: 0:39:23
    Disk Information: ℹ️
        TOSHIBA MK5065GSXF disk0 : (500.11 GB)
            disk0s1 (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 499.25 GB (73.74 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Apple Internal Memory Card Reader
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Applications/KeyRemap4MacBook.app
        [loaded]    org.pqrs.driver.KeyRemap4MacBook (8.4.0 - SDK 10.8) [Click for support]
            /Applications/Roxio Toast 6 Titanium/Toast 6 Titanium.app
        [not loaded]    com.roxio.TDIXController (1.3) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.IKMultimedia.driver.StompIO1 (1.0.0) [Click for support]
        [not loaded]    com.avid.usb.mbox.driver (1.0.18) [Click for support]
        [not loaded]    com.digidesign.fwfamily.driver (9.0f4) [Click for support]
        [loaded]    com.digidesign.iokit.DigiDal (10.3.4f181 - SDK 10.6) [Click for support]
        [not loaded]    com.digidesign.usb.elevenrack.driver (1.0.1) [Click for support]
        [not loaded]    com.ikmultimedia.driver.StealthPedal (1.0.0) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) [Click for support]
        [not loaded]    jp.co.roland.RDUSB0138Dev (1.0.0 - SDK 10.6) [Click for support]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [not loaded]    com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.panther (5.9 - SDK 10.-1) [Click for support]
        [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) [Click for support]
    Startup Items: ℹ️
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        RDUSB0138Startup: Path: /Library/StartupItems/RDUSB0138Startup
        Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.avid.mbox.helper.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [unknown]    com.oracle.java.Java-Updater.plist [Click for support]
        [loaded]    org.pqrs.KeyRemap4MacBook.server.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [running]    com.digidesign.elevenrack.helper.plist [Click for support]
        [running]    com.digidesign.fwfamily.heler.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [unknown]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.paceap.eden.licensed.plist [Click for support]
        [loaded]    org.pqrs.KeyRemap4MacBook.load.plist [Click for support]
        [loaded]    PACESupport.plist [Click for support]
    User Login Items: ℹ️
        Dropbox    Application  (/Applications/Dropbox.app)
        apple-scc-20150427-140055    UNKNOWN  (missing value)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
        iLokClientHelper: Version: 3.5 - SDK 10.5 [Click for support]
        Silverlight: Version: 4.0.60831.0 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.1
        googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        AdobePDFViewer: Version: 10.1.1 [Click for support]
        JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
    Audio Plug-ins: ℹ️
        Avid CoreAudio: Version: 10.3.4.181 - SDK 10.6 [Click for support]
    3rd Party Preference Panes: ℹ️
        Digidesign Eleven Rack  [Click for support]
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        Mbox  [Click for support]
        RC-300  [Click for support]
    Time Machine: ℹ️
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 499.25 GB Disk used: 425.51 GB
        Destinations:
            Shupester [Network]
            Total size: 3.00 TB
            Total number of backups: 66
            Oldest backup: 2013-06-17 21:18:22 +0000
            Last backup: 2015-03-19 06:26:07 +0000
            Size of backup disk: Excellent
                Backup size 3.00 TB > (Disk size 499.25 GB X 3)
        /sbin excluded from backup!
        /usr excluded from backup!
        /System excluded from backup!
        /bin excluded from backup!
        /private excluded from backup!
        /Library excluded from backup!
        /Applications excluded from backup!
    Top Processes by CPU: ℹ️
            31%    mtmd
            19%    Safari
             8%    Finder
             6%    mds
             4%    Dropbox
    Top Processes by Memory: ℹ️
        180 MB    Mail
        172 MB    mds
        139 MB    Safari
        131 MB    WebProcess
        106 MB    Pages
    Virtual Memory Information: ℹ️
        4.72 GB    Free RAM
        3.28 GB    Used RAM
        0 B    Swap Used
    Diagnostics Information: ℹ️
        Apr 28, 2015, 06:53:27 AM    Self test - passed
        Apr 27, 2015, 11:34:56 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Pro Tools_2015-04-27-113456_[redacted].crash
        Apr 27, 2015, 11:34:23 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Pro Tools_2015-04-27-113423_[redacted].crash

  • G4 PPC won't Sleep, Restart, or run Screen Saver

    Hi all,
    My 7 year old 1.25 GHz G4 PPC, until recently, has run with little to almost no problems (at least nothing I couldn't solve on my own).
    Now, this past week all of a sudden I can't get the computer to go to sleep, either through Energy Saver settings or manually. It just doesn't respond and nothing happens. I read through some other similar questions that have been posted in the past and tried a few of the offered solutions. I've run disk utility, and tried disconnecting all USB peripherals, still non-responsive.
    Likewise, I can't get my screen saver to run either through Energy Saver settings or through my Hot Corners (all other hot corner settings seem to work fine). It will only launch through System Prefs > Desktop & Screen Saver > Test.
    The last problem I have noticed so far is that I can't perform a restart, when I do the process starts, but almost immediately goes to a grey screen with the little spinning circle (the one that looks like a clock face) and stays that way. I've let this screen run for as long as about a half hour to see if something would happen, and nothing did. In the end I have to force a power down by holding down the power button.
    Again, as recommended elsewhere, I have repaired disk permissions and verified the disk, with still no change. I have disconnected all usb peripherals (3 external HD's, iPod, powered usb hub, despite the fact it's worked fine for the past 6 months with all these connections [6 months ago my firewire 400 ports stopped working, haven't replaced them yet]). I have not installed any new software recently, and my last software update before this started happening was iTunes 8.2.1 a couple of days before I first noticed the problem.
    Any ideas?

    Hi japamac,
    Thanks for the tips. (I had to create a new account here).
    Tried all your advice and nothing worked. I ended up getting fed up and tried reinstalling OSX and that didn't work either. After that I zeroed my drive (twice) and started from scratch. That's why I've been late in responding, it takes forever to backup your system when all you have to work with are usb ports at 12kb/s.
    Anyway, upon completion of zeroing my HD I reinstalled OSX 10.3 and checked all my settings, no issues were apparent, I could put the computer to sleep, run my screensaver, and all hot corners worked as well, all with no apparent problems. After that I downloaded and installed all updates for OSX 10.3, and still everything worked fine. So next I reinstalled OSX 10.4 off my disk, and once again, everything worked fine. So I started with my software updates (just the basics) one at a time retesting after each one, Java updates: everything worked, iPod phone support: everything worked, DVD Player update: everything worked, then I updated the 10.4 update bundle to 10.4.11 and all the problems returned. So I started over one more time, this time updating OSX first, and still, as soon as 10.4 is updated to 10.4.11 the problems return.
    So what could be happening with my computer that an operating system update (one I've had and run since it first came out, with no previous problems), is all of a sudden causing some sort of conflict or is just buggered in general, even after I have erased and zeroed my HD twice (presumably deleting any other file/program that could have been causing the conflict in the first place).
    And because I erased my HD, all my login settings for this forum were gone and I couldn't remember my login info so I had to create a new account.
    Thanks again,
    Chris

  • MBP won't sleep and battery drains quickly since 10.6.3 update, help!

    My 15" MBP refuses to sleep when I close the lid, it's very frustrating cause now I cant just close the lid when I'm done using it cause the battery runs down and it gets very hot. This is only since the 10.6.3 update, I've tried repairing the permissions but no luck, even when I choose 'Sleep' from the Apple pref menu it still doesn't sleep.
    Any idea's?
    Along with this and the screen flickering issue plus a few other bugs I'm really starting to wonder how I justified paying £2k+ for this machine

    Nope, reset the SMC.
    When I try put it to sleep it wakes up 15seconds on the button every time. When I close the lid to put it to sleep the apple logo on the lid lights up every 15 seconds aswell.

  • Macbook pro won't sleep and is super slow

    Hello,
    My macbook has suddenly become very slow at everything that it does (scrolling, typing, openning new tabs in browsers, literally everything) and when I close the led, the little LED light beside the remote sensor remains on. Doesn't go into blinking mode. When the macbook is awake and working, that light is off (don't remember if this is norm). I have read the previous blogs, I've tried all the resets and I've tried permission repairs. I just don't know what to do anymore.
    Does anyone have any suggestions, or solutions?
    F

    If there is anything in the card-reader slot, including an empty adapter, remove it and test. Otherwise see below.
    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD  com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; BI () { $PB\ :CFBundleIdentifier "$1"; }; LC () { $2 launchctl list | awk 'NR>1 && !/0x|\.[0-9]+$|com\.apple\.(AirPortBaseStationAgent|launchctl\.(Aqua|Background|System))$/{print $3}' | grep -Fv "$1"; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"and $((l-25)) more line(s)"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^EO]|x([^8]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/s/^.*://p' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=On; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; bi=`egrep '\.(kext|xpc)/(Contents/)?Info.plist$' <<< "$sys" | while read i; do [[ -f "$i" ]] && BI "$i"; done`; o=`kextstat -kl | grep -Fv "$bi" | cut -c53- | cut -d\< -f1`; Pm "Kernel extensions"; li=`egrep 'Launch[AD].+\.plist$' <<< "$sys"`; jl=`while read f; do [[ -f $f ]] && $PB\ :Label $f; done <<< "$li"`$'\n'"$bi"; R && o=`LC "$jl" sudo`; Pm Daemons; o=`LC "$jl"`; Pm Agents; o=`for d in {/,}L*/Lau*; do M; done | grep -Fv "$li" | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; p=`lsbom -pfc /var/db/*/*.BSD.bom | sed -En '/peri.+\/.+\./s/^\.\/[^/]+//p'`; [[ "$b" && "$l" && "$p" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do i="$d"/Info.plist; [[ -f "$i" ]] || continue; ID=$(BI "$i") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -exec cksum {} \; | awk '{print $3"\t"$1}' | grep -Fv "$p" | awk '{print $1}'`; Pm "Periodic scripts"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=On; Ps Firewall; o=`scutil --proxy | egrep 'Prox.+: [^0]'`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; [[ "$I" =~ [AW]i ]] && { o=`/S*/*/P*/*/*/*/*/airport -I | awk '/lR/{print $2}'`; o=$((o<=-87?o:0)); Ps RSSI; }; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for

  • Duplicate loops in GarageBand 11

    My GB Loop Browser shows duplicate loops, I would like to remove the duplicates. Not sure how or where. I know it's been asked many times but I can't find a GB11 specific solution. Previous versions of GB appear to store Apple Loops in different loca

  • Posting period 011 2013 is not open while posting the document using F-02 getting the error

    Hi SAP Captains, Pls help me here. While posting the document using T-code F-02 getting the error "Posting period 011 2013 is not open. Please help me how to do, can you provide step by step. Rgds..Suresh

  • How to convert pl/sql block into single update statement

    Dear all gurus, I have pl/sql block mention below, Can I convert this pl/sql block to single update statement if possible? If not how to optimize this block? Pleaese suggest. thanks in advance. Vijay DECLARE CURSOR vt_mlr_cursor IS Select master_key,

  • Block The Vendor Payment

    Dear All, I need to Block the Vendor Payment .But I need to do MIGO,and MIRO Transaction.Without payment block .I want that while doing miro it automatically block for payment without any manual intervention. Thanks & Regards Meruta

  • Documentation on XI / R3 / BW communication - urgent

    Hi , We currently starting a new BW implementation and our customer want to use XI as integration platform between SAP R/3 and BW. We find documentation on it on sdn, but we want to know if we can reuse standard extractor without modification in this