IMac 27¨ screen gets darker

Hello,
I have an iMac 27 bought in 2011. My screen flickers sometime and I know that it's known issue but also my screen is like dusty from some points. I added a photo of right side of the screen. What can I do with that?
http://img404.imageshack.us/img404/8830/qqka.jpg

Too bad, well run I'd recommend running Apple Hardware Test in Extended Mode at least 2-3 times in succession. If errors appear then you have confirmed a hardware fault and the machine needs to be taken in for repair.
Out of curiosity why did you buy it in the US and what country do you live in? I have seen (as recently as yesterday) a user buy a machine in the US to try and save money, then take it to another country (Brazil) where Apple does not have an Apple Store. That user now has a repair issue and must deal with a reseller he did not buy the machine from.IMHO not a good way to begin a business relationship.

Similar Messages

  • In the midle of a song the screen gets dark, then suddenly appear the home screen of ipod and the song stops.

    i have updated my ipod 4g to ios 5.0. everything went great, but something is not right cause sometimes in the midle of a song the screen gets dark, then suddenly appear the home screen of ipod and the song stops. help-me, what should i do?

    It occurs with both ripped songs and ITMS songs, but not always the same songs. Just this morning, I had a song skip ahead, then put down the ipod for a few mintues, came back and that same song did not skip ahead at all. I've been on a stretch now of about 20 songs with no skipping whatsoever. Hmmmmmm....
    I've used all the five "R"'s multiple times to no avail. It just seems so random, it frustrates me.
    Thanks for the help, King

  • Imac 2012. screen goes dark in the middle of working.

    while working on the imac the screen goes dark. to turn it back on hittingseveral keys and short tap on in/off button. after trying vsarious things it turns abck on and then happens againg. like its going into sleep mode intentionally? any ideas?

    iMac (27-inch): AMD Radeon 6970M Video Card Replacement Program

  • IMac G4 screen remains dark

    my 17' G4 iMac USB 2.0 (10.4.11) screen froze and the following messages appeared:
    "System failure: cpu 0 00000008 unaligned stack"
    as well as lots of the following lines:
    "Unresolved kernel trap (cpu 0) 0x600 Alignment DAR" etc
    Had to shut it down by using power switch. Pulled out all cables except for mouse + keyboard.
    I can start it - but there is no start-up chime and screen remains black.
    Tried safe boot, no response. Tried to open drive door during start up for putting in hardware test disc (mouse held down), door won't open.
    Tried PRAM, no response. Tried PMU reset, no change.
    Removed extra RAM I had fitted years ago and tried to start it. After I did that the iMac responds
    with a 4 x beep morse code signal after turning it back on, but screen remains dark.
    Also tried to start in target mode, but other 27' iMac does not "see" G4 iMac.
    Anyone has any thoughts ? Don't want to get rid of this machine, I love the design.
    Thanks
    Walter

    There is some likelihood of a hardware failure, to include
    perhaps, the logic board; some kernel panic issues on an
    iMac G4 could point to such an event.
    Not certain if checking out such a machine at that stage is
    possible with the original Apple Hardware Test, since that
    relies on viewing evidence of the results in said computer.
    • What do the beeps mean on startup?
    http://www.welovemacs.com/whdoallthbme.html
    {After Oct 1999 the four-beeps signal appears to mean a
    different symptom, according to the above page...} *4 beeps =*
    *no good boot images in the boot ROM (and/or bad sys config block)*
    • *Power On Self-Test Beep Definition* - Part 2:
    http://support.apple.com/kb/HT1547
    • Technical Note TN2063: Understanding and Debugging Kernel Panics
    http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
    • Resolving Kernel Panics:
    http://www.thexlab.com/faqs/kernelpanics.html
    While it may not be a major melt-down, you could be in for
    a project at some point in the future if you start looking into
    finding other similar iMac G4s (they are getting scarce) to
    use either for parts or as spares should their needs go there.
    I have two running iMac G4 1.25GHz 17" & one in-op for parts.
    A skilled and willing computer shop tech could probably
    test the computer further, but some shops would rather
    you buy something newer from their retail store. In some
    cases, you may be able to get a working iMac G4 17" 1.25
    for a few hundred dollars; if lucky, one in fine shape.
    Perhaps one of the techie folks who frequent these forums will
    see your post & offer their insights, based on experience.
    Good luck & happy computing!

  • Ibook g3 screen getting darker

    Hi, my ibook g3 screen is getting darker and darker. Yesterday I was able to see my wallpaper on the background, but today it's almost completly gone! The HD seem to work fine, I don't think it's a logicboard problem (I had to deal with that about two years ago), and it open and close as usual. Do I have do replace my screen?
    Thanks for the ansmers

    Have you tried resetting the PMU? The PMU (Power Management Unit) has control over the backlight function, so resetting it may help.
    <hr>
    If not, sometimes the inverter cable causes a black screen (no backlight). If this is what is wrong, the display may work at odd angles. Try opening (and/or closing) the display a bit to see if that helps.
    If that doesn't help, it sounds as if you may need to replace the inverter board. I'd be inclined to think this is the problem because your description seems to indicate a gradual loss of the backlight.

  • Screen gets darker

    I cant find anything like this on the forum but perhaps I just missed something. For months now every 2 or 3 weeks the bottom right, bottom centre or the whole screen gets a bit darker. Normally if its part of the screen it get better after an hour but after a while even that does not happen. In the end resetting the PRAM or PMU is the only way to go to sort it out. I calibrate my screen every few days but always check before doing so that the screen has not gone dark again. Now I think this all started when bluetooth did a vanishing act as well. The computer tells you the hardware does not exist any more! This all started after one of the many 10.3 updates. Might not be all related to each other but thought best to mention it. Any ideas? When I say the screen goes darker I mean it goes greyer. There is no colour tints.

    Thank God other people have noticed this probelm as well! I too have been having this problem for about the last two month. Though, I noticed it after I purchased my iSight camera. I would certainly hope that this issue can be resolved quickly and does not become another "nano-issue."
    15" Powerbook G4, Al   Mac OS X (10.3.9)  

  • Screen Getting Darker

    I have a 3.06 GHz Intel Core 2 Duo that i bought in November of 2009.  i've noticed in the last month or so that about have of the screen is a little bit darker.  there's more light on the right side of the screen than the left side.  Does someone have an answer to this?  thanks.

    JMVD,
    Seems to me that you're quite the Apple expert. I had this problem with my eMac. Since, I am not American or English I hope I can make the problem chrystal clear.
    I think I had the same problem with my screen. A few days ago I left my eMac running while not using it. After a while the screen became dark due to the "sleep modus setting" of course. This is not the first time this happens. Only this time after activating the eMac again my screen was so much darker. So of course I changed the screen setting (calibration) at the system preference menu. It improved the brightness of the screen but I noticed that it still was not normal. I said to myself: as long as I can work with it than it would be no problem. But then last night I forgot to shut down my eMac and again the screen got darker. This time I tried to change the setting again. Again the calibration process but I saw that I am using the maximum brightness and I got irritated by the quality of the color. And furthermore if the screen would get darker the next time I already used up the calibration / brightness possibities.
    So I went looking for help at the apple site. And I found your discussion. And I just tried the command option o f advise of yours etc etc etc. After the automatic restart only the grey screen (background) with in the centre the apple logo appeared.
    Your advice was very simple so I just went for it. I hope I did not erased the whole unit. Please tell me what I should do know. Also I saw the screen (grey back ground / apple logo) was kind of dark. But, I never look at the screen when I start up the eMac. Maybe I am imagining this.
    I hope you can help me with this. Unfortunately, I do not have the apple care protection plan.
    Thanx.

  • HT201406 When I open a web page the screen gets dark and not responding

    Screen ges dark and non- responding can't get out of it frozen

    Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
    If that doesn't work then try closing Safari via the taskbar and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • E-mac screen getting darker with time? part 2

    (continuation of old thread with same title, since that one was closed)
    Steve A. - Any update on the repair? you were going to try several components. I find with my darkening screen, i can sometimes restore full brightness by "sleep" and wakeup.
    e-mac   Mac OS X (10.2.x)  

    JMVD,
    Seems to me that you're quite the Apple expert. I had this problem with my eMac. Since, I am not American or English I hope I can make the problem chrystal clear.
    I think I had the same problem with my screen. A few days ago I left my eMac running while not using it. After a while the screen became dark due to the "sleep modus setting" of course. This is not the first time this happens. Only this time after activating the eMac again my screen was so much darker. So of course I changed the screen setting (calibration) at the system preference menu. It improved the brightness of the screen but I noticed that it still was not normal. I said to myself: as long as I can work with it than it would be no problem. But then last night I forgot to shut down my eMac and again the screen got darker. This time I tried to change the setting again. Again the calibration process but I saw that I am using the maximum brightness and I got irritated by the quality of the color. And furthermore if the screen would get darker the next time I already used up the calibration / brightness possibities.
    So I went looking for help at the apple site. And I found your discussion. And I just tried the command option o f advise of yours etc etc etc. After the automatic restart only the grey screen (background) with in the centre the apple logo appeared.
    Your advice was very simple so I just went for it. I hope I did not erased the whole unit. Please tell me what I should do know. Also I saw the screen (grey back ground / apple logo) was kind of dark. But, I never look at the screen when I start up the eMac. Maybe I am imagining this.
    I hope you can help me with this. Unfortunately, I do not have the apple care protection plan.
    Thanx.

  • Is your screen getting darker?

    Is anyone else experiencing the screen on their MacBook Pro getting darker and darker? I can't brighten it up with the contrast button, and while it's not totally black - it's really dark and hard to see. I tried downloading this correction:
    http://support.apple.com/kb/TS4088
    But when I try to open it, it says that this file isn't supported on my computer. FYI - I'm got a MacBook Pro, and am running OSX 10.6.8

    Asking if anyone else has seen this isn't likely to get you anywhere.  If you find out someone else has seen it, you still haven't learned anything other than that someone else has had the same problem.  If you're wondering if it's a common problem, it is not.
    As to the update mentioned by that link, that sounds like a different problem.  And if it won't install on your machine, that's because your MBP is not one of the affected machines.  Updates like those will only install on specific hardware.
    From the sounds of things, it sounds like your backlight is failing.  I would take it to an Apple Store or call Apple Support ASAP.

  • Ipad screen getting dark fast

    The screen on my iPad turned pink a couple of days ago and now it's getting dark fast.  I've tried everything I can find out here:
    I check the brightness and it's all the way up.
    I reset it.
    I plugged it into a computer.
    I put my knee into it. Lots of people thought that was a miracle remedy.
    I can't afford a new iPad.  Please help thanks.

    Is it still under warranty? I'd back it up and make an appointment and take it to your local apple store. It sounds to me like the screen or backlight is dying.

  • Emac screen getting darker with time?

    ive had my emac now for a little over a yea...about 14 months to be exact. in may i noticed that the screen was getting considerably darker to the point where i could hardly see anything. so i calibrated it to lighten it up. it worked and then got even brighter and kinda back to normal. well this weekend it got seriously dark again. i recalibrated it again and now its somewhat brighter but the picture is still way to dark and looks like garbage. im very frustrated as i thought that it may just get better with time again as it did in may. any suggestions from anyone would be great!!!

    JMVD,
    Seems to me that you're quite the Apple expert. I had this problem with my eMac. Since, I am not American or English I hope I can make the problem chrystal clear.
    I think I had the same problem with my screen. A few days ago I left my eMac running while not using it. After a while the screen became dark due to the "sleep modus setting" of course. This is not the first time this happens. Only this time after activating the eMac again my screen was so much darker. So of course I changed the screen setting (calibration) at the system preference menu. It improved the brightness of the screen but I noticed that it still was not normal. I said to myself: as long as I can work with it than it would be no problem. But then last night I forgot to shut down my eMac and again the screen got darker. This time I tried to change the setting again. Again the calibration process but I saw that I am using the maximum brightness and I got irritated by the quality of the color. And furthermore if the screen would get darker the next time I already used up the calibration / brightness possibities.
    So I went looking for help at the apple site. And I found your discussion. And I just tried the command option o f advise of yours etc etc etc. After the automatic restart only the grey screen (background) with in the centre the apple logo appeared.
    Your advice was very simple so I just went for it. I hope I did not erased the whole unit. Please tell me what I should do know. Also I saw the screen (grey back ground / apple logo) was kind of dark. But, I never look at the screen when I start up the eMac. Maybe I am imagining this.
    I hope you can help me with this. Unfortunately, I do not have the apple care protection plan.
    Thanx.

  • T43 LCD Screen gets dark

    Hello,
    I have noticed that T43 LCD screen all of a sudden while laptop in operation, getting darker and darker and becomes SO obscure to read! 
    I have checked the LCD connector and seems fixed at its position...What else should I come up with?  According to the manual, first thing is to check the 'LCD connectors' and maybe the inverter card...However, this laptop is almost 10 years old and LCD panel never replaced so far..
    rgds,
    Aris
    AT

    Hi Steffen
    On my old Tecra notebook I have had similar issue. From time to time the display started to flicker. One day after standby mode the display was completely dark. I was able to se that there is some open window but there was no background light.
    In my case the display was replaced. Now I have new display and I am very happy. Now there is much more brilliance and I can work better than before.
    To honest I am not a technician but I presume very soon you can expect totally display malfunction.

  • 06 intel 20" imac screen gets darker at bottom

    just started uup the computer this morning and found that the screen fades to a darker tone down the screen.
    http://farm2.static.flickr.com/1031/132232444748b3e99079b.jpg
    anyone else had this or can anyone offer solutions, iv run out of warranty and support.

    Both. My 20" iMac at work has the same problem. It is common on the ALU 20" iMacs and yes I would say it's defective. Apple may not agree though.
    George
    <Edited by Moderator>

  • Mid 2011 iMac 27" screen half dark

    Hey there,
    Anyone recognise this problem? iMac is only 2 months old and it appears as if the LED lighting has died on half the screen or something.
    Any help or idea would be appreciated before I lug this thing down to a store.

    asha_f wrote:
    How much does this cost to get it fixed?  Apparently my warrenty just ran out this month and even though i thought i got Apple Care when i leased my machine, i was mistaken.
    Contact Apple's Express Lane, and plead your case. 27" iMac displays run over $500 USD.

Maybe you are looking for

  • Having problems installing the new flash player

    As the title say im having great problems installing the new flash player. I have downloaded it many times and tried installing each time, still nothing. Ive tried installing it offline with my computer totally disconnected from the internet, nothing

  • How to interface with ROWID column in DB2?

    I'm using DB2 version 7.1. I have a column in a table called ROWID, and the Data Type is ROWID. However, I don't know how to interface with it in Java. For example, for CHAR and VARCHAR, I use the String class. For SMALLINT, I use int, etc. But what

  • Clarification on the GSS-TSIG supported zone transfer in MS-DNS.

    I have one clarification on the GSS-TSIG supported zone transfer in MS-DNS. I tried the following scenario in zone transfer, Configure my DNS server(supports GSS-TSIG algorithm for Zone transfer) as primary for a zone 'test.com' Configure MS-DNS  as

  • Load testing JSF application

    Is there any tool to load test JSF application created with JSC? Can we use the load testing feature in Java Studio Enterprise to test JSF application created with JSC?

  • Process a single trail file

    Hi All, I want to process a single trail file using a new replicat process. How do I do that? Is there any extra options I have to use in ADD REPLICAT command?