IMac 27" with OS 10.6.8 + CF cards = unstable, stalling transfers

Both my iMac 27" early 2010 and MacBook early 2008 have huge problems first with recognizing and then transferring files from my Transcend and SanDisk Extreme CF cards. Have read the threads about the card reader being the problem. Anyone else? I run 10.6.8 SL on both machines.

Problem solved. Turns out the reader I got off eBay was too slow. Bought a new one, and it works without a prob.

Similar Messages

How can I get a video signal using IMAC 27 with only mini display port. I like to send the signal wireless to a TV using a TV/audio transmit system.

I have an IMAC 27 with a mini display port ( only this). I also have all the adapters ( mini display port to VGA, HDMI...).
Since I moved to UAE I like to transmit the signal frm my IMAC ( where I also look German TV on) to my TV. I will do so by using a wireless Transmit receive system with theree cinch inputs ( transmit system ( video, 2x voice).
The distance to the TV IS ABOUT 10m and one wall. I don`t want to use a cable.
Is there any solution for example mini display to VGA + VGA adapter to cinch so I can use the transmit system?
HDMI would also be an optiekn, bat then I have to by another Transmit receive system.
If somebody made already the experience I would appreciate to share the information
Is there may be any store in UAE where to get support. It is very diificult to get good advice here. They sell everything bat can not reaaly explain and have very often no technical knowledge. With this problem nobody until now can help me.
Hans
<Email Edited by Host>

I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

Hey Guys, from Germany. I want to connect my iMac 21" with my Tv just for fun. Does anyone know, how it works. With a Hdmi adapter?

Hey guys! I want to connect my Imac 21 " with my Tv just for fun. Does anyone know , how it works?

Selecting the correct adapter and cable depends on which year model iMac you have and what inputs the TV has?
Check the User's Guide that came with your iMac or your Spec's at > Apple - Support - Technical Specifications
to see if your iMac has a Mini-DVI or Mini DisplayPort and then select that adapter with the correct connection for the TV.
Example: if you have a 2010 or 2011 iMac and an HDMI ready TV, then you would want the > Moshi Mini DP to HDMI Adapter with Audio Support - Apple Store (U.S.)

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this?

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Can PC software work on the iMac G5 with Intel?

Can PC software work with the iMac G5 with Intel processor? I need to know! And also, is there a new apple computer coming out next year (2007) that will be able to run PC software? I am mainly asking because I want to know if I will be able to run PC games on iMac G5 with Intel or the new computer coming out in 2007. I need to know!
iMac G5 Mac OS X (10.4.6)
iMac G5 Intel Processor Mac OS X (10.4.6)

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
Here is a link;
Forum: Boot Camp Public Beta
Panther was the version of Mac OS X before the current version, Tiger. Apple Computer does not release information in advance of its introductions of new hardware/software and the rules of the Apple Disussions forbid "speculation." Boot Canp is Beta because it is not yet a permanent part of Mac OS X. It works fine. It does not require constant updates. It comes with instructions for its own installation as well for Windows XP SP2. You have to purchase Windows from Microsoft. Folks report that games run fine and that Windows runs better on their Macs than it ever did on their PCs!
Visit the Boot Camp forum at the above link for further info.

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

Hi mshields1162,
Great question, and welcome to Apple Support Communities.
First, you may want to choose to have the sidebar displayed for familiarity:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
iTunes 10: Sync to your iPod
http://support.apple.com/kb/VI72
Thanks,
Matt M.

Yosemite installed on iMac purchased with Mavericks now takes 2 minutes to boot and give the login screen.

Downloaded and installed os x yosemite on iMac that was purchased originally with Mavericks. When power button is pressed I get start up audio tone and then the the black screen with the white apple symbol with the progression bar. The bar moves very slowly two about one third and then the mouse cursor appears and there it stalls for around two minutes. After the wait the login screen appears and it operates normally. This whole process before update would only take maybe 30 seconds.
If I try the web recovery process it will revert back to Mavericks any suggestions on what this might be. I do have an external Mac passport pro external drive that does have time machine enabled and has been there for months.
Thanks

After spending a number of hours with Apple Care personnel I was connected with a supervisor and finally got the iMac to boot up on every attempt and in a reasonable amount of time. Login screen now comes on in 30 to 40 seconds and computer is usable within a total time of 1 minute to 1minute 30 seconds.
Here was the process. Tried to download whole operating system with reinstall from utilities menu at power on and at 7 hours progress bar stalled at one third the way. Reason, time machine external hard drive was still connected during process. Disconnected all external connections except power and tried download again. This time whole operating system downloaded in 15 to 20 minutes. Yosemite installed and rebooted automatically and booted to login screen, signed in then to desktop, but boot took around five minutes. Shutdown and connected all peripherals, i.e.. ext. HD, DVD, printers and tried to start. iMac stalled at 2 minutes into progression bar with white apple symbol before login screen. Removed peripherals and tried again and still stalled and would not boot.
What was done to correct is as follows. Started iMac in Safe Mode, cleared all items in cache from Macintosh HD/Library folder and System /Library folder, system start up items, launch agents, and launch daemons contents cleared, removed printers in system preferences, ran disk utilities verify and repair of disk and disk permissions. Shutdown and removed power from iMac. With no peripherals system then booted normally. Reconnected peripherals while iMac was still on and added printers back to system preferences and all is well.
So it seems only reasonable that the downloading problem was hindered by the time machine external hard drive, to which an Apple rep. agreed and the extremely slow boot up or stalled boot up was caused by items in the start up and launch folders. I will state here that I was using my ISP's anti virus software for the Mac which was in the launch folders and most likely was causing the boot up problems.

New IMac 27"with dual internal hard drives

How do I manage Data on my new IMac 27"with dual internal hard drives? I have just migrated my data to my new computer. Since I've done it from a TM backup, it all went to the Analog HD. Ressearching online I've figured I could re-run Migrating assistant and replace different data between the SSD and the Analog. My problem now is: I want to keep my Music Library (iTunes), my Aperture Library and my documents on the analog, and use the SSD for System, Users and Apps. Aperture, is easy, because both Aperture and iPhoto can find their way, bt iTunes and My documents are a issue. Can Anyone help me?

Install OS X on the SSD:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your SSD volume (usually Macintosh HD) from the left side list. Click on
the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button and set the Zero
Data option to one-pass. Click on the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to change the target disk to your SSD.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
After you boot from the SSD open Users & Groups preferences. Click on the lock and authenticate. CTRL- or RIGHT-click on the user account and select Advanced Options. You will see a Home Dir: field with a Browse button on the right. Click on the button. Navigate to the HDD's Users folder. Select your account folder then click on the Open/Choose button. You must restart immediately.
Upon the restart your SSD system will now be using your actual Home folder located on the HDD. You can then go about installing your applications or copying them from the HDD to the Applications folder on the SSD (and also from the Utilities folder on the HDD to the one on the SSD.) You will likely need to do some transfers of the Applications Support and Preferences folders found in the main Library folder.

I am using a Seagate backup plus portable drive on my iMac 7 with OSX 10.9.2. At startup up I always get a popup window stating "The disk you inserted is not readable by this computer. I click ignore and everything seems OK. Is it?

I am using a Seagate backup plus portable drive as my time machine backup on my iMac 7 with OSX 10.9.2 Mavericks. At startup I always get popup window stating "The disk you inserted is not readable by this computer..? I click ignore and everything seems to be OK. Time machine seems to be backuping up to the seagate. I can open time machine and see the history of backups. Why does this message come up at startup of computer????

If you installed the Seagate software, remove it according to the manufacturer's instructions.

I have an IMAc 5 with OS 10.6.8. I am having trouble doing a iDVD. Can I remove photos from iphoto to an external device to free up space on my computer? what do I need and how do I do it?

I have an IMAc 5 with OS 10.6.8. I am having trouble doing a iDVD. Can I move photos in iphoto to an external device to free up space on the computer? What do I need and how do I do it?

Hey William Dofflemyer,
Thanks for the question. I understand you would like to move some photos in your iPhoto library to free up space. The following article may help you with that:
iPhoto '11: Move your iPhoto library to a new location
http://support.apple.com/kb/PH2506
Also, I understand you have some questions about iDVD. The following video may provide more information:
Apple - Find Out How - Movies - iDVD ’08
http://www.apple.com/findouthow/movies/idvd.html
Thanks,
Matt M.

New IMac preloaded with Lion, how do I load Lion on my Macbook

I bought an IMac preloaded with OS 10.7.4 and want to load it on my Macbook Pro. Since it didn't come with a disc how do I go about doing this?
Thank You

You cannot use the Lion that came with your iMac to also upgrade your MBP. You must purchase a separate upgrade for the MBP. Your MBP must be running Snow Leopard 10.6.6 or later in order to purchase and download Lion from the App Store - $30.00.
Or you can wait until Mountail Lion is released this month and upgrade directly for $20.00.
How to Install Lion Successfully - You must have Snow Leopard 10.6.7 or 10.6.8 Installed
A. Repair the Hard Drive and Permissions:
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.3.) if DW cannot fix the drive, then you will need to reformat the drive and reinstall Snow Leopard.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the backup volume. Source means the internal startup volume.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade to Lion:
Purchase the Lion Installer from the Mac App Store. The download will start quickly. Lion is nearly 4 GBs so a fast internet connection is essential. Download time could run upwards of 4 hours depending upon network conditions and server demands at the time.
Boot From The Lion Installer which is located in your Applications folder.
Follow instructions for installation.

HT3423 My iMac came with logic Express 8 installed, how do I get it to work on my mac book pro

My iMac came with Logic Express 8 Pre installed. How do I get it to work on my Mac Book Pro

Along with your OS and applications installation DVDs, you should have gotten an LE8 installation DVD along with its manual and serial numbers when you bought your iMac.
Your license allows you to install LE8 on two computers as long as they are your computers, you are the sole user, and you do not run Logic on both simultaneously. So dig out your installation DVD, install it on your MacBook Pro and enter your serial number and you will be good to go.

After having to reinstall my drive with applications I get a message with Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". How do I do this? I am using a mid-2010 iMac 27" with 10.7.3

After having to re-install my start-up drive recently I am getting a message with Adobe Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". I am using a mid-2010 iMac 27" with OSX 10.7.3. How do I do this?

Premiere is an Adobe application and is supported in their forums.
Good luck.
x

My imac crash with kernel panic many times. I upgraded to Maverick but i have the same problem.

Hi,
my imac crash with a kernel panic many times per day, many applications are unable to open correctly and the close after 1 or 2 seconds.
I suspect a memory problem but i am not sure. here is the dump of the last crash.
thanks
Anonymous UUID:       3A1C8E99-A83E-A306-542B-C0812262FDFB
Tue Feb 25 21:59:18 2014
panic(cpu 0 caller 0xffffff80034dc19e): Kernel trap at 0xffffff7f84498978, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x000000000c00002c, CR3: 0x000000005a9a0000, CR4: 0x0000000000000660
RAX: 0xffffff802c8d3108, RBX: 0x00000000beef0202, RCX: 0xb4ae06f6f0af0095, RDX: 0x0000000000000020
RSP: 0xffffff81554cb720, RBP: 0xffffff81554cb740, RSI: 0x0000000000100c80, RDI: 0x000000000c000000
R8: 0xffffff7f846c0fb4, R9: 0xffffff81554cb394, R10: 0x000000000001d620, R11: 0xffffff801ee95308
R12: 0x0000000021000000, R13: 0x0000000000000000, R14: 0x000000000c000000, R15: 0xffffff81554cb808
RFL: 0x0000000000010206, RIP: 0xffffff7f84498978, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000c00002c, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81554cb3b0 : 0xffffff8003422f69
0xffffff81554cb430 : 0xffffff80034dc19e
0xffffff81554cb600 : 0xffffff80034f3606
0xffffff81554cb620 : 0xffffff7f84498978
0xffffff81554cb740 : 0xffffff7f844987ad
0xffffff81554cb7a0 : 0xffffff7f843849d9
0xffffff81554cb850 : 0xffffff7f8438dfc5
0xffffff81554cb910 : 0xffffff7f843b3232
0xffffff81554cbb10 : 0xffffff7f843b4cb4
0xffffff81554cbc00 : 0xffffff7f848dc980
0xffffff81554cbc60 : 0xffffff7f848d9702
0xffffff81554cbcf0 : 0xffffff7f848c4137
0xffffff81554cbd20 : 0xffffff7f84881497
0xffffff81554cbd40 : 0xffffff7f84895428
0xffffff81554cbd60 : 0xffffff7f84895147
0xffffff81554cbda0 : 0xffffff7f848ccc8a
0xffffff81554cbde0 : 0xffffff7f84895687
0xffffff81554cbe00 : 0xffffff80038ca892
0xffffff81554cbe20 : 0xffffff80034b205f
0xffffff81554cbe50 : 0xffffff8003426bb1
0xffffff81554cbe80 : 0xffffff80034139b5
0xffffff81554cbef0 : 0xffffff800341e003
0xffffff81554cbf70 : 0xffffff80034c921d
0xffffff81554cbfb0 : 0xffffff80034f3e26
      Kernel Extensions in backtrace:
         com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f8435d000->0xffffff7f845cbfff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f839fe000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f84162000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f84082000
         com.apple.GeForceTesla(8.1.8)[7DAF283F-6FD3-3783-B3CC-D23964F1B9B8]@0xffffff7f8 4879000->0xffffff7f84943fff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f839fe000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f84162000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f84082000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f8435d000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x0000000003200000
Kernel text base: 0xffffff8003400000
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 2157140189946
last loaded kext at 1446762719430: com.apple.driver.AppleUSBCDC          4.2.1b2 (addr 0xffffff7f84944000, size 20480)
last unloaded kext at 1530259986024: com.apple.driver.AppleUSBCDC          4.2.1b2 (addr 0xffffff7f84944000, size 16384)
loaded kexts:
com.Cycling74.driver.Soundflower          1.5.1
com.rim.driver.BlackBerryUSBDriverInt          0.0.74
com.apple.driver.AppleBluetoothMultitouch          80.14
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.driver.AGPM          100.14.11
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.GeForceTesla          8.1.8
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHDA          2.5.3fc1
com.apple.driver.AppleMikeyDriver          2.5.3fc1
com.apple.driver.AppleBacklight          170.3.5
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleHWAccess          1
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.filesystems.autofs          3.0
com.apple.iokit.SCSITaskUserClient          3.6.0
com.apple.driver.AppleIRController          325.7
com.apple.driver.AppleUSBCardReader          3.3.5
com.apple.driver.XsanFilter          404
com.apple.BootCache          35
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AirPort.Atheros40          700.74.5
com.apple.driver.AppleUSBHub          650.4.4
com.apple.driver.AppleRTC          2.0
com.apple.nvenet          2.0.21
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleUSBOHCI          650.4.1
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.security.quarantine          3
com.apple.nke.applicationfirewall          153
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.driver.AppleBluetoothHIDKeyboard          170.15
com.apple.driver.AppleHIDKeyboard          170.15
com.apple.driver.IOBluetoothHIDDriver          4.2.0f6
com.apple.driver.AppleMultitouchDriver          245.13
com.apple.iokit.IOSurface          91
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.nvidia.classic.NVDANV50HalTesla          8.1.8
com.apple.nvidia.classic.NVDAResmanTesla          8.1.8
com.apple.driver.DspFuncLib          2.5.3fc1
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleHDAController          2.5.3fc1
com.apple.iokit.IOHDAFamily          2.5.3fc1
com.apple.driver.AppleSMC          3.1.6d1
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.kext.triggers          1.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOUSBHIDDriver          650.4.4
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.iokit.IOAHCISerialATAPI          2.6.0
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.driver.AppleEFINVRAM          2.0
com.apple.iokit.IONetworkingFamily          3.2
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.TMSafetyNet          7
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.iokit.IOReportFamily          21
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.driver.AppleKeyStore          2
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.pthread          1
com.apple.kec.corecrypto          1.0
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 12 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST3500418ASQ, 500,11 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Photosmart C4600 series
USB Device: Built-in iSight
USB Device: External HDD
USB Device: Internal Memory Card Reader
USB Device: IR Receiver
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:

Remove the aftermarket memory and see whether there's an improvement.

IMac 27" with display-port pc

Hello all!
I'm thinking about buying a used iMac 27" with the following specs:
Intel Core 2 Duo
iMac10,1
3,06 GHz
4 GB
I'm guessing this is the late 2009 model?
I really want to use this as a monitor for a new desktop I'm building. My question is; will it work with every pc that has graphics card with display-port ?
Many thanks in advance!
Message was edited by: iTim

Yes, the 10,1 is a late 2009 model. If it will work depends on whether the pc graphics card will supply Mini DisplayPort compliant signals.
Here is some information on using the 27" iMac in Target Display mode:
http://support.apple.com/kb/HT3924
Hope this helps.
Message was edited by: captfred

IMac 27" with OS 10.6.8 + CF cards = unstable, stalling transfers

Similar Messages

Maybe you are looking for