Imac 333mhz/96mb battery location and replacement

My fruit colored imac 333mhz/96mb is not turning on. I suspect that the original battery has died. Where is the battery location and replacement information?

Thanks! I also just found this: http://www.djonmac.com/battery/changebattery.html

Similar Messages

RTC (CMOS-BIOS) Battery Types and Replacement Help

hi,
my notebook: hp g3050ea
i'm trying to replace my RTC battery. Today i bought a CR2032 Lithium Battery. But after that i noticed my computer's RTC battery is little different. İt is Mitsubishi CR2030E
i'm not sure if it is the right part for my pc. Can I use any CR2032 battery or should I use CR2030E ?
i bought this battery
Mitsubishi CR2030E

I think that you may use it. The "E" on the old battery could be "enhanced" and the size is the same as I noticed. The main issue should be the size and the voltage. Both are the same..
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

T500 Battery Failure and Replacement Options

The battery on my T500 recently "failed due to normal wear" and will no longer hold any charge. It had over 1000 cycles in a little under two years of use, so I guess that's not to be unexpected. The failure happened suddenly though (went from 2 hrs of normal life to no charge overnight). I tried reseting the battery through power manager to no avail, so I'm looking for a replacement now.
I'm currently looking at a couple of options and wondering if anyone has experience with any of these:
Stock Lenovo (I assume it would be the most reliable, but also most expensive at $179) http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:item.detail?...
C&K on Amazon (Claims to be genuine; $136) http://www.amazon.com/Lenovo-ThinkPad-40Y6797-Thinkpad-Standard/dp/B001TQ6VQ6/ref=sr_1_35?ie=UTF8&m=...
eComElectronics (Claims to be genuine, although some older reviews say it's non-OEM; $97) http://www.amazon.com/ThinkPad-SL-Cell-Li-Ion-Battery/dp/B000CBG0XI/ref=cm_cr_pr_product_top
Assortment of non-OEM batteries on Amazon ($25-$60) http://www.amazon.com/s/ref=nb_sb_ss_i_1_26?url=search-alias%3Delectronics&field-keywords=lenovo+t50...
Do #2 and #3 seem fine? Even though they aren't sold through Lenovo, would they still be eligible for the 1 year warranty?
What about the non-OEM's? Are the price savings not worth the hassle of getting a lemon and the compatibility warnings from the power manager?
Thanks

if they are an official resellers then you can claim warranty from Lenovo, otherwise you would have to get the warranty through the retailers themselves.
Non-OEM quality can vary, since there are so many of them, it is hard to give you any sort of advice as to what you would expect.
But you could try the 6 cells Boston Power Battery, they have 3 years warranty, and priced competitively. They are the only non-OEM battery i would buy.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Grigbag, how to dynamically locate and replace components??

Hi there :)
The thing is. I am making a projectplanner kinda program. What i want is to use a gridbag layout. Then i want to make the size of the gridbag panel depend on the lengt of the active project, and with the lenght of on field per day. This works great.
Then i want to add a component in all the "empty" fields, this component has a set size, and the only visible thing here is the right border. this way i have a table kinda thing that dynamically changes depending on the projects size.
However now i want to add my projects. The idea was for the projects to be coloured JPanels with a name. And they would have to be placed according to their create date and deadline.
The problem is:
when i have calculated the field from which i want a certain "project" to be added. there is allready an emptyfield panel... How do i replace the first panel with the new one?? is it even possible? or am i simply too much of a noob :)
I really hope you can help me!!

thanks. but how about the constraints?? am i wrong in thinking that i have to use them in order to place my components at the right places??

IMac 333Mhz memory and slots

I recently pick up an iMac 333MHz (tray loading)with 64 mb of memory and would eventually like to get it to OSX.
I have located the main memory slot according to the instructions, but understand that their is a second memory slot. I have been unable to locate it or find instructions on how to add additional memory to the second slot. I understand that the 333MHz iMac can have 512mb (2 x 256mb). If anyone has instructions on how to access the second memory slot and also a resource to get memory for the iMac I would appreciate it.

I recently pick up an iMac 333MHz (tray loading)with 64 mb of memory and would eventually like to get it to OSX.
Note... The lower slot requires low profile memory. You can put the low profile memory in the upper slot if you want.
From what I read, most people feel the 333 machine can take 512meg of memory.
Be sure to update the firmware before moving to Mac OS X 10.2 or 10.3.
You should verify that you have the latest firmware, before installing new software. See the system profiler for details. What firmware do you need?
http://docs.info.apple.com/article.html?artnum=86117
Mac OS X takes about 4gig of harddrive space.
This will require a minimum of 128meg of ram. You may put 512meg of ram in this machine. There are two memory slots. One must be Low Profile memory. Be sure you can return your memory cards. iMac memory cards are finicky.
http://eshop.macsales.com/shop/memory/iMac-G3-G4/
All the tray loading iMac g3's, models a-d, are constructed the same.
Here is a good disassembly page:
http://www.macopz.com/columns/imacrepair/disassembly.html
The second article in this series has information on replacing the battery:
http://discussions.apple.com/thread.jspa?messageID=2584291
The tray loading iMac requires the boot partition to be within 8gig. Since there are hidden partition before the first visible partition, people recommend that you make the first visible partition 7.5 gig to 7.9gig. The machines support upto a 128gig Parallel ATA drive.
You should be able to use Unix symbolic links to 'move' some directory like /Users to the second visible partition.
Robert

3GS battery life and current location problems

I have a 3GS. Until I took a holiday in Mexico it worked fine. On return, the battery life is one half or less as before. I thought I may have picked up a virus or something connecting to the local WiFi (data roaming turned off). I restored a backup and no change. Then I noticed that the 3GS was not able to find its location. I tried several suggestions from several forums to no avail.
The details:
I recently took a holiday in Mexico. On return I noticed that the battery was not holding a charge as well as it did before I departed or while I was in Mexico for that matter. On return it takes two to three charges to make it thru the day. My first thought was a virus or malware. I did some research on the forums and it was suggested that I do a restore. Ironically, gratefully, I had done a backup before I left so I preformed a restore. There was no change to battery usage. Trying more trouble shooting I discovered that my iPhone cannot find its current position. Once again I researched the forums. I tried changing the international location and back again, resetting the network settings and turning airplane mode on and off. I was able to find a location that was incorrect (several blocks away compared to right on before my holiday) one time and now once again my iPhone cannot find its/my location. On occasion, not every time, when trying to find my location I receive an error message “Could not activate cellular data network”. My theory is the battery life and in ability to find its location may be connected.
Any help will be appreciated.

I read this and felt a funny coming on....
I know its not funny when an appliance that we depend on doesn't work right, but my funny bone said, "Did you shake the phone to reset the GPS, and did you fly backwards from Mexico to reset everything as it was before you left?"
Forgive me!!!!
Message was edited by: De Gomment

HT5163 I turned my iphone off when visiting the doctor's surgery and now it won't turn back on. It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens. I have taken out and replaced the sim card too. Any sugg

I turned my iphone off when visiting the doctor's surgery and now it won't turn back on. It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens. I have taken out and replaced the sim card too. Any suggestions

If wjosten's tip doesn't work try plugging it into a USB charger (not through your computer), wait about 30 seconds and it should come on. If it doesn't remove the cord from the phone and keep trying this. I've had this same issue and found a combination of the reset & charging cable tends to work. Sometimes it takes about 5 minutes for the phone to respond.
Best of luck.

I was alerted that by iMac Trackpad batteries were low and advised to replace. I did, and now my trackpad is not responding. Please advise.

I was alerted that by iMac Trackpad batteries were low and advised to replace. I did, and now my trackpad is not responding. Please advise.

Make absollutely sure the batteries are installed correctly.
+ Positive in first > Apple Wireless Keyboard, Mouse, and Trackpad: How to install batteries

Have a message on startup," low internal battery". Need replacement and instructions on replacing

HP Pavilion dv7-1127d, Vista Home Premium 64 bit edition. Message on start up "low battery, internal". Need replacement part identifcation and replacement instructions.

Sounds like your iCloud backup isn't happening.
Check Settings / icloud / storage & backup. See if you have enough available storage. If you don't, you will need to purchase additional storage (First 5GB is free), or alter your backup settings to free up space. Camera Roll is the biggest offender.

I buy new iPhone5s befor 11day but. Now don't work I tried restore but same result I went to the nearest repairer and replace the battery and the charging port and the monitor but same result, I failed, said mother Bord (Raja solution)

I buy new iPhone5s befor 11day but. Now don't work I tried restore but same result I went to the nearest repairer and replace the battery and the charging port and the monitor but same result, I failed, said mother Bord (Raja solution)

If you bought the iPhone from an authorized store/vendor, you should have taken the iPhone to them or any other Apple Store for evaluation under warranty.
Once it has been opened by non-Apple entity, Apple will not do anything for this.

My IMAC screen went to sleep and I have it set to enter a password upon waking it up. However, my bluetooth keyboard died while it was asleep and I replaced the batteries and tried to enter my password and it is not picking up my keyboard. What can I do?

My IMAC screen went to sleep and I have it set to enter a password upon waking it up. However, my bluetooth keyboard died while it was asleep and I replaced the batteries and tried to enter my password and it is not picking up my keyboard. What can I do? I will not let me enter my password to get in and trouble shoot the keyboard. Please Help!!

I pushed in the button on the top right corner. It turns a green light on and then it goes off. I held it in until it started blinking. It blinks for a bit and then the green light turns off. I am still not able to type my password. What should I do now?

Is it possible to retrieve a registration key for a hard copy of iWork 06? Moved and cannot locate disc, and replaced the computer it was originally installed on. When I transferred the program to new Macbook, the reg key apparently didn't transfer.

Is it possible to retrieve a registration key for a hard copy of iWork 06? Moved and cannot locate disc, and replaced the computer it was originally installed on. When I transferred the iWork from original Macbook Pro to new Macbook Pro, the reg key apparently didn't transfer. Any ideas?

Do you still have access to the old MacBook Pro? If so, you can transfer the license by copying the com.apple.iwork.plist from Macintosh HD > Library > Preferences to the same location on the new Mac. Note that this IS the main HD Library, not your user library. I have found that these files are not moved during setup or migration.
Are you really running Tiger 10.4.7? If so, you should update to 10.4.11. You can find the updater here. You also might consider buying the retail disk of iWork '09 from a third-party such as Amazon.com or eBay. It will add a lot of features for you. iWork '09 does require Tiger 10.4.11 at a minimum.

I need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

i need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

Here is how to do it yourself.
http://www.youtube.com/watch?v=2h53otOBTsI
Here is how to send it to apple.
http://www.apple.com/support/ipod/service/battery/
Hope this helps!

Can I get a data recovery from Apple if my iMac was in the hard drive replacement programme and I wasn't notified about it?

Basically my iMac just crashed and I searched on Google for replacing my hard drive and came across the iMac 1TB Seagate Hard Drive Replacement Program at http://www.apple.com/support/imac-harddrive/
Which is that Apple is asking all 2009 - 2011 iMac users to return their iMac for a free hard drive replacement because it currently has a fault in it. After entering in my serial number, I see that my iMac is elegible for a replacement.
I did register my iMac with Apple, but I didn't receive any email about this program and I lost all my recent data because of the faulty hard drive. I never had an issue before with the drive so this just happened out of the blue.
Is it possible to get a free data recovery from Apple for this? I find that it was a lack of communication that I lost most of my data.

I completely understand that it's my responsibility to back up my data but I have it set to every 2nd month, not on a weekly or daily basis to back up the data.
Apple might not be in data recovery business but could they not acquire a third party to do this?
This is what happened:
It was on sleep overnight and when I tried waking it, it was lagging badly. So I shut it down and restarted it. I phoned into techincal support to find out whats wrong, but they were giving me advice to reset the params etc. But i think it made it worse because it didnt want to get passed the white start up screen.
So I phoned back to ask if it's a usual issue with my version of iMac and the man replied that it isn't common and that I should run the disk utility to check the hard drives health.
I installed Mountain Lion on a USB and started the disk utility. Then it highlighted in red that it's a hardware fault and cannot be repaired by the disk utility. Therefore the hard drive has a serious fault with it.
That's when I Google'd for a replacement drive and came across the program. The techincal guy didn't even tell me about it or anything.
If I knew about this sooner, I would have taken it in for a replacement.

-refurbished iMac has a 20GB partition for Boot Vamp with FAT format. I want to remove this and replace it with a much bigger format with NTFS formats?

My (new to me) Apple refurbished iMac has a 1TB hard drive. Running OS 10.6.7 Snow Leopard. When I tried to install a Boot Camp partition, prior to installling Windows 7- 64 bit, I discovered that the machine had a 20 GB Boot Camp partition, too small for what I need. HOw do I remove the 20 GB partition, and replace it with a 500 GB partition?

I have a number of PC and Mac Pro running Windows Pro, and the OS only needs 80GB partition, plus whatever data etc.
New but used does not sound like Apple Store (refurbished) Specials which would be a 'virgin' OS.
I would reformat and do your own clean install.
There may be something wrong and why it was left that way for one thing. May be a problem with the partition table.
Boot from OS X DVD and you can usually try Disk Utility to "-" remove and then repair and get back, and you of course normally should be able to just use Boot Camp Assistant which is one of its functions - not just to create partition.
For normal resizing, or creating the free space you need has to be in one contiguous chunk and not be fragmented, which is hard to imagine that 500GB is going to be intact.
And whatever you do, rule #1 in the pdf guide: backup before beginning.
http://www.apple.com/support/bootcamp

Imac 333mhz/96mb battery location and replacement

Similar Messages

Maybe you are looking for