Imac 3g - Installing CF card instead of HDD - your suggestions ?

Hello all!
I've purchased Imac Graphite 600mhz version and im thinking of retrofitting a Compact Flash card instead of hard drive. I suppose there is someone who did this already, what are your suggestions and experiences ?

Last year was my big buying decision for a camera. If you think I'm over thinking things with my editing PC build now, imagine then! hehehe! I ended up buying a Panasonic HPX370 with P2 cards. A lot more expensive, but well worth it after testing all the other cameras in a specific "price" range on the market. But back then the XF series was not out yet. For me 4:2:2 is a must. Plus the fact it's a real shoulder mount, with a real manual lens, and I could put a lectrosonic unislot receiver... well, you get the picture.
Honestly, I was not impressed with the Sony EXs. The picture is nice, but the ergonomics are wrong. Sure they have a larger sensor, but 35Mbps 4:2:0 long GOP that are stored on cards priced the same as P2? P2 cards can handle 100Mbps... 35Mbps is compact enough for SDHC cards. And That's why JVC uses them, with the same codec as Sony's. Ridiculous if you ask me. But that's typical to Sony!  Another bummer with the EX that turned me off? I regularly need to review footage, and switching to and from CAM and VTR takes a whooping 25 seconds!  Woohaaaa!!! Another strike for EX!
But if I were looking at a hand held sized cameras, and if the XF was out when I tested all the cameras, the 50Mbps 4:2:2 codec looks mighty interesting to me. Even if it's long GOP.  They are also resonably priced cameras.
All this to say, when I was seriously considering the JVC HM700, my card of choice was the Transcend series. After much research, they offer the best price/capacity/quality ratio. And the JVC reseller I delt with swore by them. Of course they are SDHC cards and not CF. But I just thought my anecdote would help steer things in the right direction.

Similar Messages

  • I had a 'dead' iMac repaired and it needed a new HDD & graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I've no idea what this will be.  Help please.

    I had a 'dead' iMac repaired and it needed a new HDD and graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I have no idea what this will be.  can anybody help please?
    <Personal Information Edited by Host>

    On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
    Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
    Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
    Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
    Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
    Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
    Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
    Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
    I don't know what to make of this.
    Peter R

  • Installed airport card into my imac G4 flat panel and now it work

    I purchased an airport card from Mac-pro as Apple does not sell them anymore. I installed it into my IMAC G4 flat panel as per the instructions. Now, when I turn on the computer the power light comes on, and the screen is black and it really isn't making any noise, as though it is not starting up. It was working just fine before I installed this card!!!! can anyone help??!?!?!?!?

    The following Apple article provides the details of
    installing an AirPort card in the Flat Panel iMac
    G4s. You may want to double-check it to see if you
    might have missed something in the the installation
    process.
    I installed the card properly, as per the instructions you forwarded to me. I did have some trouble getting the card to completly fit into place, one side seemed to go in easier than the other, but it did go in. Is there anyway to get this machine up and running again?

  • Hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute

    hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute...
    i tryed diffrent commands such as diskutil eraseDisk JHFS+ Disk1
    diskutil list , wont show up my harddrive , i now its functionally cause it shows up in disk utility with name and i can get info about it , but everything is greyed out can only switch between "erase , partition , recover , Raid ,....
    when i click the apple in the top left corner the whole menu is greyed out... what to do ?  help me please
    Sincerly AppleNoob92
    p.s i have no experience in apple imac's at all never used before, but im kinda windows nerd so computers i understand but this imac make my insane, cant seem to find any solutions anywhere on the WWW....

    Your HD may be crashed, so you probably should use the oringinal install discs to run Apple Hardware Test in extended mode. If error codes appear this confirms a hardware failure. In addition you cannnot repair the HD using Disk Utility from the startup disk, you have to use the origninal Install discs that shipped with the computer or the most up-to-date version of OS X on a disc that you have.

  • IMac late 2009 reads only 2GB RAM,I have re-installed the card 10 times now,what else could I do?

    iMac late 2009 reads only 2GB RAM,I have re-installed the card 10 times now,what else could I do?

    Please give us some more details on what exactly has gone wrong with your iMac.
    What size RAM module/s are you trying to install and where did you purchase the RAM module/s from?
    RAM has to be installed in matched size pairs.
    Make sure the RAM module clicks into place. You need to apply a little bit of force to get the module to slide in and clIck into its module slot location.
    Correct, compatible and reliable Mac RAM can ONLY be purchased from online RAM sources Crucial memory or OWC (macsales.com).
    If you purchased RAM from ANY other source and still can't get the RAM to work, return it for a full refund and buy RAM from the sources I have listed.

  • How can I install on the SD card instead of on int...

    I installed from the play store and it installed on internal memory. No option given to move to SD card.
    I even installed from an APK file and that too installed on the internal memory!
    Any suggestions? I have 3 other messaging apps that  I managed to install on the SD card. Skype is the only one refusing to install where I want it.
    I'm running gingerbread 2.3

    I believe if you load the .jad or .jar file right on the the memory card, and then explorer to it and run it it will work. I haven't tried this but believe I heard of someone doing this. When the program loads it will load in to main memory, but at least you can store the files on the memory card.
    The other option is to use a third-party program. There is one called Aerize Card Loader 2008:
    http://aerize.com/blackberry/software/loader/
    Message Edited by JeremyKitching on 06-01-2008 10:56 AM

  • I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB)

    I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB). When I play video formats like xvid, mkv, avi iMac freezes and emits horrible sound,in service said the problem is not overheating. Not a problem with memory or hard disk because I placed second correct parts.The same problem is with OSX 10.6.8 and 10.8.4 and other players.Apple hardware test found no problem and tech tool pro found no fault.
    After five days of testing in the service they can not  found fault and it was decided to change the graphics card.
    New graphics have been tested for two days but it is not reproduced divx ... but their test software which did not find any fault on the old graphics...
    Do I have the right to complain if repair does not fix the problem because I use non apple softwere and video formats.

    You could look at the System Profile for the info it presents for the card.  But why wouldn't you think it's not up to date if you have the latest install (according to your sig above)?
    What program are you trying to run?  Is there anything in the system log? 
    I think it's the program that's having the problem and not anything with your video software.

  • Older iMac not recognizing AirPort card

    I manually installed an AirPort Extreme card in my G4 iMac. I followed the instructions exactly. However, it's not showing up anywhere in the Network Preferences. It's like I never installed it. I think I did everything right, I even went back and did it again, still to no avail.
    Is there something I'm missing here? Remove screws, plug in card, restart computer, right?
    Part of what be my problem is I'm using a newer iMac that does have an AirPort card built-in as a base station, (or, at least, that's the plan- is nothing showing up because I don't have a real base station?). Maybe I'm totally wrong about all this, but I don't think that should stop my computer from not recognizing the card.
    It is an older card, bought refurbished from the Apple Online Store.

    Which G4 iMac did you install the card into? Does it have a clock speed of 1 GHz or faster? Click on the Apple menu and select "About this Mac".
    Assuming the clock speed is 1 GHz or faster, run System Profiler and look in the "AirPort:" field. If the card is not recognized, the field will be blank.

  • Notebook doesn't recognize installed graphics card

    Recently purchased the HP Envy 15-q748ca notebook which comes with the Nvidia GeForce GTX 850M installed. However, laptop has stopped upgrading the drivers and no longer recognizes that that GPU is installed and is instead using the Intel HD 4600 GPU. Help.

    hi @BurnsMac ,
    Welcome to the HP Forums!
    It is a great  place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I understand that you recently purchased your notebook and it has switchable graphics and it is not utilizing both cards.  You have done all the updates.
    When I checked the specifications for your notebook I do not see 2 graphic cards.  HP ENVY 15-q178ca Notebook PC Product Specifications
    Here is a link to Resolving Video and Graphics Issues.
    Here is a link to Switchable Graphics on Notebooks Configured with Intel and ATI GPUs that may help.
    If you still have concerns, I suggest contacting HP support for assistance.
    Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Just installed airport card but can't get a solid signal

    a few weeks ago an electrical storm blew out my ehternet port. i consulted a mac genius at the apple store and decided to avoid replacing my logic board by getting an airport card and wireless router. After installing this business last night i was delighted to see full bars on the signal icon. but then it instantly dropped to two bars. then none. then a few minutes later back to two, full, none, etc. My computer and the wireless router are pretty much right next to eachother- i'm not splitting the cable between my machine and anything else (no other computers, not the tv). can anyone suggest what might be causing the signal problem? there's a major heatwave, would that cause problems? also, should i have looked into getting an aditional ethernet card instead? i'm desparately trying to avoid taking my machine out of my house (it's a desktop and i live in Queens so it's a b-tch to take into the city) so i'm really hoping to make this wireless buisness work. thanks so much!

    j9fleri, Welcome to the discussion area!
    One (or more) of the following must be true:
    The antenna wire isn't properly attached to the AirPort card. Is this the original AirPort card or the AirPort Extreme card? If it is the AirPort Extreme card, use the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card to verify that the antenna wire is properly installed.
    You are experiencing some sever RF interference. See KB 58543, AirPort: Potential sources of interference.
    The wireless router isn't working properly.

  • Can i use 4gb ram card instead of (2x2) 2gb cards in macbook pro 15" 2.0 ghz

    can i use 4gb ram card instead of (2x2) 2gb cards in macbook pro 15" 2.0 ghz

    Hi John,
    If your MBP is a 2011, yes, and here is one example: http://eshop.macsales.com/item/Other%20World%20Computing/1333DDR3S4GB/
    If your MBP is from 2006, the other year Apple made a 2GHz, the answer is no, as the max RAM is 2GB.
    Given that it appears you already have 2x2GB installed, I'm "guessing" you have the 2011 model, so the answer is yes.

  • Installing Audigy Card on K7T Turbo2

    K7T Turbo2 mobo w/ V3.6 BIOS installed
    1 gb PC133 SDRam (2 512's)
    ATI Radeon 9500 Pro agp Graphics (128 mb)
    SB Audigy gamer PCI sound
    RealTek 10/100 nic pci
    Win 2K SP4
    Antec True Power 550 (550w) PS
    WD 800JB as stand alone
    WD 400BB in line with Sony 16x DVD player
    DC output +5v (0A - 40A)
    DC output +12v (0.8A - 24A)
    DC output +3.3v (0A - 32A)
    DC output -5v (0A - 0.5A)
    DC output -12v (0A - 1A)
    DC output +5v sb (0A - 2A)
    Did a clean reinstall of Win2k because I felt there had been too many hardware changes since the original installation. Evidently, while I was trying to get a XP 2600+ 333 recognized as a 2600+ (I learned in the BIOS forum that this wasn't possible) the onboard sound became enabled in BIOS.
    I did the reinstall without the sound card. I then attempted to add it, but of course I had a conflict between the Audigy card and the AC97 onboard. After I figured out that the onboard sound was enabled, I disabled it in BIOS. I went to safe mode and removed all hardware related to sound and all software related to Creative. I shut down again- removed the audigy card - restarted. Shut down again, inserted the audigy card in a different slot (also tried original slot). Windows doesn't recognize it. It does see a "multimedia audio controller" that I cannot find a driver for. If I cancel out of that driver installation and try to install the Creative software it advises that no sound blaster card is present.
    Should I start all over again? If I do, should I install win2k with the sound card installed?
    Thanks in advance for any suggestions
    PS - system was working fine before I attempted the re-install but was sluggish which I felt was due to all the hardware changes (mobo, graphics card, sound card, hd) done at various times, not to mention the software installs and uninstalls.

    This is the advice I rcvd from Creative technical support. It worked. Sound card is properly and cleanly installed. I also disabled the onchip sound in BIOS advanced chipset in addition to disabling the onboard audio in BIOS Integrated peripherals.
    Again, this is for an audigy sound card and Win2k:
    please try out the following cleansweep and
    re-installation procedure instead, to see if it works:-
    1.  Enable the WINDOWS 2000 STARTUP MENU by rebooting your computer and
    tapping F8 once every second OR holding the SHIFT key while rebooting.
    2.  When the menu is displayed, select SAFE MODE and press ENTER.
    3.  Once in SAFE MODE, insert the sound card's installation CD and exit
    out of the installer
    4.  Click START / RUN.
    5.  Type "X:\AUDIO\DRIVERS\CTZAPXX.EXE into the OPEN field (replace X
    with the applicable CD-ROM drive letter).
    6.  Click OK.
    7.  When the CREATIVE DRIVER UPDATE UTILITY opens, select DRIVER
    UNINSTALLATION under UPDATE OPTION.
    8.  If two out of the three options are disabled or grayed out under
    DRIVER TYPE, click OK.  Otherwise, select WDM.   You will then be
    prompted to reboot, but please do not do so.
    9.  Click START / SETTINGS / CONTROL PANEL / ADD/REMOVE PROGRAMS.
    10.  Remove all Creative SB Audigy 2 programs.
    11.  Close all windows, and reboot the computer normally (ENTER NORMAL
    MODE).
    12.  The Audigy 2 will be detected by Windows.  Cancel the ADD NEW
    HARDWARE WIZARD when able.
    In order to install your soundcard properly, I recommend you to ensure
    the following for the audio installation and test:
    - The card is the only card installed other than the Graphics card.
    - The card is at least one empty slot away from the Graphics card.
    - Place the soundcard away from all the others.
    - That the card is seated properly in the PCI slot.
    - Move the PC's internal wires away from the soundcard.
    - That the on-board sound on your motherboard is disabled through the
    BIOS.
    - That the on-board gameport is disabled through the BIOS.
    - That your motherboard BIOS is up-to-date.
    - That the operating system is up-to-date with the latest service packs
    and patches.
    - That there are no background applications open when you attempt the
    solution.
    - That the anti-virus program is disabled.
    - That if you are over-clocking your system, return all options to their
    recommended settings.
    - That you access the PC with administrator rights.
    13.  Perform an installation via the CTRUN program on the CD
    (X:\CTRUN\CTRUN.EXE where X is the drive letter of your CD drive that
    has the installation CD).
    [note:RE: Item 13 - there was a ctrunx directory with ctrunx.exe and start.exe in it. The ctrunx.exe wouldn't execute, but the start.exe did the job]
    14.  Reboot if prompted.
    15.  Please obtain the latest updates for your Audigy 2 card from our
    website:- http://us.creative.com//support/downloads/
    Under the option 'Select your product': Select 'Sound Blaster'->'24-bit
    Advanced HD'->'Sound Blaster Audigy 2'.
    Under the option 'Select your operating system': Select 'Windows 2000'.
    Click on the 'Go' button just below the Windows selection.
    In the next page, click on 'EAX 4.0 ADVANCED HD Driver Update for
    Creative Sound Blaster Audigy 2/Audigy 2 ZS' and the download should
    begin.
    16.  Once you are prompted to OPEN FROM CURRENT LOCATION or SAVE TO
    DISK, select SAVE TO DISK and download the update to MY DESKTOP.
    17.  When the file has completed the phase of being transferred to your
    computer, locate the file on your desktop and double click the file.

  • Just got this error message - The installed graphics card does not meet the minimum requirements for Aperture

    Help.  I have an iMAC - not even one year old - just got this message - The installed graphics card does not meet the minimum requirements for Aperture.
    I have not made any changes to my machine. Help  - I can't get to my images

    Try restarting your system.
    If that does not help, we will need to know your Aperture version and MacOS X version. And do you use an external monitor? Then disconnect it before rebooting.

  • Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

    Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

    Please click Profile Update and follow the directions for updating your profile. Your computer may be too old to support Aperture however without knowing anything about your iMac it's impossible to say. Also there is an Aperture forum to use and you can look at Aperture's System Requirements below to see if you have the minimum.
    System Requirements
    Minimum
    One of the following Intel-based Mac computers:
    Mac Pro
    MacBook Pro
    MacBook
    MacBook Air
    iMac
    Mac mini
    Operating system:
    Mac OS X v10.5.8 or v10.6.2 or later
    Memory:
    1GB of RAM
    2GB of RAM required for Mac Pro
    Other requirements:
    DVD drive for installation
    1GB of disk space for application and documentation
    7GB of disk space for Sample Library

  • I have zero out all data on my imac, as i brought it second hand and the disk the guy supplied dont seem capatable with my imac to install the operating system again so it is frozen at the grey start up screen. show i buy a new snow leopard disc fromapple

    i have zero out all data on my imac, as i brought it second hand and the disk the guy supplied dont seem capatable with my imac to install the operating system again so it is frozen at the grey start up screen. should i buy a new snow leopard disc from apple and install that as my new operating system. please help as had the computer a month now and still cant use it yet.

    You can call AppleCare and request a replacement set of the original DVD's that shipped with the computer for a nominal charge. You will need the serial number (look on the bottom of the stand) and a credit card. Click the AppleCare Contact Info link. Without knowing which iMac you have it's very difficult to say if a new SL disc would work or not.

Maybe you are looking for