IMac 5.1 running Snow Leopard 10.6.
Running Snow Leopard 10.6. Will Airport extreme work? Could I manage airport extreme from my iPad or iPhone with the app? Having issues with the range of our Fios wireless reach and am thinking about Airport Extreme but am concerned that I won't be able to manage it via the iMac we use.
Running Snow Leopard 10.6. Will Airport extreme work?
Please see the System Requirements for the AirPort Extreme:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
http://www.apple.com/airport-extreme/specs/
Could I manage airport extreme from my iPad or iPhone with the app?
Yes, assuming that it meets the requirements shown above
am concerned that I won't be able to manage it via the iMac we use.
The iMac cannot be used to set up or administer the AirPort Extreme, but an iPhone or iPad that meets the requirements listed above could be used for that purpose.
Similar Messages
-
I have an iMac mid-2010 running Snow Leopard 10.6.8. Is it possible to install Mavericks and Windows 8 on separate partitions while keeping Snow Leopard? If so, can you describe the steps?
That should not be a problem as long as there is enough room on each partition for each OS.
You would:
Use Disk Utility to partition your HD
Download the Mavericks installer and install it on one of the open partitions (when you run the installer from your 10.6.8 partition, it will ask you where you want to put Mavericks, and you will specify one of the open partitions).
Use Boot Camp to install Windows on another of the open partitions. Mac Basics: Using Windows on your Mac via Boot Camp -
I am trying to upgrade to Lion. I need to go through Mac App store to buy it. I need to get the Mac App store icon in my dock. I have run Update Software several times, trying to get the Mac App store onto my iMac, but with no luck. It doesn't show up in the dock, it doesn't show up in Finder under Applications, and it doesn't show up when I search in Searchlight for App Store, Store, Mac App Store, etc. What am I doing wrong?
I am running snow leopard
James....
You arne't necessarily doing anything wrong.
Install the Mac OS X 10.6.8 Update Combo
That should reinstall the App Store for you.
Restart your Mac after the combo is finished installing.
You should see the App Store icon in the Dock and be able to access from your Apple menu also.
Make sure your Mac meet's Lion's requirements -
I was hoping to upgrade to Lion 10.7 in order to utilize iCloud with my iPhone. However, I cannot determine if the OS 10.7 is compatible with an 2006 iMac. I am currently running Snow Leopard. Everything I've looked at on the Apple Site shows the newer OS on a laptop with a touch pad. Does this disqualify an iMac?
Correct, they are different generations of processors. The Core 2 Duo being a 64bit processor. The Core Duo being 32 bit. Lion needs a 64 bit processor.
You would think the chip manufacturers could come up with more distinct names. :-)
Stedman -
If I activate iCloud on MBAir do I lose contacts/phone numbers on my iMac running Snow Leopard?
I have a new iPhone and wanted to activate iCloud from my MB Air, but am afraid I'll lose all my contacts/phone numbers on my iMac which is running Snow Leopard. I don't want to put Lion on the iMac, but I'd like to use iCloud between my new iPhone, my iPad, and my MacBook Air. Can I do that? Is so, how?
Thanks
Hallike to use iCloud between my new iPhone, my iPad, and my MacBook Air. Can I do that? Is so, how?
Yes.
Instructions for setting up iCloud on your Mac and iOS devices > Apple - iCloud - Learn how to set up iCloud on all your devices.
but am afraid I'll lose all my contacts/phone numbers on my iMac which is running Snow Leopard.
Your iMac contacts/phone numbers won't be effected since it's running Snow Leopard. -
I have an old Imac G4 from 2003. I would like to start using it again, however it is so out of date and runs too slowly. What are my options to update it? I really don't want to invest a ton of money - I might as well get a new one, so if there are any reasonable ways to get it to run Snow Leopard or even Lion, please help. I've also considered using a mac mini? Is that worth it either? I'm not sure which way to go here. I don't want to trash it, I feel like it can be a great computer if updated.
Presumably it is running tiger 10.4.11?
It may be able to run Leopard 10.5:
Leopard system requirements:
http://support.apple.com/kb/SP517
But that is as far as the old PPC Macs can go, and Leopard can cost up to $200 on Amazon. -
I have an IMAP mailbox that seems to only show mail 7 days on my iMac running Snow Leopard. However, on my MacBook Pro I can see all old mail that I have not deleted. It is running the next operating system (Lion?). Does anyone know how I can get all my old mail back on my iMac. It is my primary computer and I need some of those old messages. I have tried to rebuild the mailbox but it has not done anything.
I have tried to rebuild the mailbox to no avail. The mailbox behavior says: Drafts (not checked) store draft messages on the server, Notes (checked) show not in Inbox, Sent (checked) Store sent messages on the server Delete sent messages when (option never selected), Junt (not checked) store junk messages on the server Delete junk messages when (option never selected), Trash (checked) moves deleted messages to the Trash mailbox and (checked) store deleted messages on the server Permanently erase deleted messages when (one month old option selected).
I have not set up any rules that I know of other than a signature, in the very least I have not changed any. -
IS THE SITUATION HOPELESS
I used Target mode to transfer files to a new i7 iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
Please tell me how to get this disc to eject !Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive? -
I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?
kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere? -
My iMac is an early 2006 model running Snow Leopard 10.6.8 and cannot be up graded to Lion or Mountain Lion. I also am running iTunes 10.6.3 and cannot down load iTunes 7.
Hardware Overview:
Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 1.5 GB
Bus Speed: 667 MHz
Boot ROM Version: IM41.0055.B08
SMC Version (system): 1.1f5
Serial Number (system): W8******U2N
Hardware UUID: ****
It is running through a cable modem and Wi-Fi Extreme and is lightning fast.
I cannot afford to buy nor do I need a faster and more powerful iMac. My G3 iPhone accidently went swimming the other day (and died) after I had already ordered a new iPhone 5 which hasn't arrived yet.
My bottom line question is ; Do I have to buy a new iMac to be able to use my new iPhone 5. Thanks, Ted
<Edited By Host>OSX 10.6.8 can run iTunes 10.7
iTunes system requirements - http://www.apple.com/itunes/download/ -
My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?
Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6 -
mpeg video file won't open in quick time player on my macbook running snow leopard.
works fine on iMac running mountain lion.
any ideas?HI,
If iChat is Open and your think Accounts/Screen Names are logged in then go to the Window Menu
This should list the accounts that are logged in with various keystrokes ( Apple/CMD ( or ⌘) and a Number) shown next to them.
Using these should get the Buddy list "back".
It is possible to Hide the Buddy list and then Quit iChat.
iChat will then "remember" where the windows were eve if this was Hidden.
Can you confirm that after reinstalling or restoring from Time Machine with possibly an Earlier Version you have Downloaded the COMBO version of OS X 10.6.8 and "run the COMBO" (Installed it - again) to update iChat ?
It is possible the text chat Window is also Hidden on double clicking a Buddy.
The easiest way for this to happen is to use a second Display and drag some windows to the second Display.
iChat "remembers" where you last had Outgoing Chats so Audio and Video windows will be where you left them as will Text Chats.
Incoming Chat Invites are normally in set places unless there is a chat already open to that Buddy.
With Windowing issue like this is sometimes pays to delete com.apple.ichat.plist itself (on it's own) and restart iChat (this plist holds the window positions amongst other things)
8:49 PM Monday; February 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
My iMac running Mountain Lion can't see my iMac running Snow Leopard on my network.
My iMac running Mountain Lion can't see my iMac running Snow Leopard on my network. Both Macs work fine and the SL Mac can see and connect to the ML Mac.
There isn't a script.
Mail connects to any standard email server.
Open the Connection Doctor from the Window menu.
Click Show Details and Check Again.
What errors does it post trying to connect to your email provider.
I dont' think there is any personal information in the output, but you might want to sanitize the output in a text editor before posting the output here in case there is a login user name or something like that. -
Is there a way for my macbook air (running Lion 10.7.2) to access an external hard drive on my Imac (running snow leopard 10.6.8) specifically for Iphoto and itunes?
Yes. For those two applications specifically there is sharing. This presumes both computers are on and connected to the same network.
In iPhoto, enable sharing by (on the iMac) going to the iPhoto menu > Preferences > Sharing > check Share my photos. You can either share the entire library or only selected albums. Now on your MacBook Air, in iPhoto, go to the same preference pane and select Look for shared photos.
iTunes has something similar. In the iTunes menu > Preferences > Sharing > check Share my library on my local network. On the other computer, look in the left column for SHARED and select the iMac. You can now play that music on the MacBook Air.
There are other ways to share files but for those two applications this is the simplest way.
Best of luck. -
Does anyone know if I can download photoshop cc on my imac - running Snow Leopard 10.6.8 ? will it all work?
10.7.x or newer is the system requirement for CC:
http://helpx.adobe.com/photoshop/system-requirements.html
Maybe you are looking for
-
Addtion of new custom field in PP order
Hi All, I am looking forward to add a new custom field in PP order and to link it with table AUFK in the existing tabs of PP order. I dont want to use any existing field. Also I have only have an option of having a new custom tab with the new field a
-
Extend Features in Adobe Reader
Hello, I'm working on a form that has several dropdown lists fields wrapped individually into hidden subforms which become available (visible) once their assigned check boxes are selected. After testing the form, all works just fine. However, the iss
-
Why is Safari blocking the latest Java plugin?
Today, I fired up Safari to access my work server but the required Java applet wouldn't run. Safari displayed "Blocked Plugin" and clicking it said my Java was out of date and/or a security risk. I upgraded to the most recent Java (7.10, I believe) a
-
Where are the key short cuts in latest update Adobe 9?
When I updated last version of Adobe all the old key short-cuts disappeard. I can´t use the normal Windows short-cuts for opening, mowing window etc. Thanks for help! / C-G R
-
How to see the changed output for purchase order
Hi.. I have zmedruck. i need to increse item text lengh. i done this in editor. how to see the changed output now...I increased the length of text to be displayed. I checked the print preview in me23n. i cant see the increased length. Guide me where