IMac and HP LaserJet 1018

I'm switching to Mac in a few days, and I own a HP LaserJet 1018 printer, which apparently dosen't work with a Mac. (although Apple claimed that "everything works with a Mac") Does anyone here has that printer, and how does it work with a Mac? Please help...

Paul Keith-
Greetings. That is exactly how you will do it.
More information on setting up a small network can be found here.
You can download the drivers from HP. Make sure the printer is connected to the router and on before running the installer.
Luck-
-DaddyPaycheck

Similar Messages

  • Old g4 powerbook and hp laserjet 1018

    Printer preferences shows the 1018 is present at ready, but it wont print. The only information I've found apparently requires I be a developer and download a 1gig file. I went with mac because I'm not real technical and my experience has been that it will operate anything. And I'm told this is a great little work horse of a printer. What do I have to do to make this work that wont send me back to school?

    When I double click the
    load laserjet_firmwarev4.comm a terminal window
    opens and I get this...
    Printer HPLaserJet1018:
    No printer queue found for HP LaserJet 1000.
    No printer queue found for HP LaserJet 1005.
    Cannot locate firmware file.
    No printer queue found for HP LaserJet 1020.
    logout
    [Process completed]
    What am I doing wrong?
    The above would indicate that you possibly missed step during the installation process of the foo2zjs drivers. At the end of the installation process, a Terminal window should have opened and led you through the process of downloading and installing the firmware file from the internet. That is why there is the line "Cannot locate firmware file" when you try to load the firmware.
    Please do the following:
    1. Mount the disk image that contains the foo2zjs drivers.
    2. Look in the folder Helpers. Locate the file InstallPrinterExtras.
    3. Make sure you are online.
    4. Double click the InstallPrinterExtras file. A Terminal window will open. Follow the instructions. This should download and install the correct firmware file for your printer. If there are any indications that this did not work, please copy all the text in the Terminal window and paste it in a reply to this post.
    Once you successfully complete the above, you should be able to use the loadLaserJetfirmware file to send the firmware to the printer.
    Matt
    Mac Mini G4; B&W G3/300    

  • LaserJet 1018 shared on Printer server doesn't print

    Hi, I'm a multi HP owner (notebook, desktop a Photosmart printer and the LaserJet 1018)... I recently bought a Iomega NAS with the printer server service and I tried to share both of my HP printers on it. The PhotoSmart 7260 works perfectly, but the LaserJet 1018 does not: it says that it have a job pending but the print doesn't start. I've passed the same nightmare when I've tried to share the printer on the Desktop PC with Windows 7 Ultimate 64 bit: job pending but no printing unless I restart the PC... on startup the print stated. I've found the way to share it with Ubuntu Server 9.10 by installing HP linux driver.Now, having this nice NAS I would like to use it as my printer server (energy saving reasons).
    I've read a lot of people with the same problem but havn't find the solution. Somebody even says that the 1018 is a low budget printer and is not enabled for sharing, but it sounds bull**bleep** to me (it prints under linux). Somebody knows if and how to solve this problem? My clients are both Win7 x64 (I have to test my Ubuntu 10.10 desktop)... should I install 32bit version drivers? ore something like that? Or should I buy a new printer (!HP)???
    Thanks
    Alessandro

    If the printer is not postscript, and you are using 'generic' then the printer is likely not understanding what is being sent to it, so it is dumping the job.
    HP printers default to HPs own page desription language called PCL (Printer Control Language).
    If you did not install all the 'additional printers' when you installed your OS, might want to do so.
    If not, check HPs site for Mac drivers, or check out GIMP & GhostScript from SourceForge.net to see if they support that particular printer

  • HP Laserjet 1018 windows 10 compatibility

    I have a Laserjet 1018 and currently using Windows 8.1 with no problems.Is the current driver for this printer compatible with Windows 10?Or should I wait to upgrade to Windows 10? And well HP provide a Windows 10 driver?

    Roby55 Thank you for posting regarding the use of windows 10 drivers and the LaserJet 1018. You may use the windows 8.1 drivers with no issues.
    Please refer to this post for more information. Thank you,Auntie Em 

  • HP LaserJet 1018 and the MacBook

    So, I bought a HP LaserJet 1018 printer this weekend because they were on sale. I have some friends who are using a very similar printer, if not the same one, on their iMac and iBook, so I figured it'd be a safe bet.
    After buying it, then doing the research (I know, wrong order), I found out that, normally this wouldn't be a problem but in recent months, HP removed the driver you could use to let this printer communciate with the Mac.
    The short story is not I have a printer I can't use with my MacBook. Since it's such a popular printer, I was wondering if anyone had any suggestions on what I could do before I pack it up and bring it back for a return. I've already followed the instructions on this website: http://forums.macosxhints.com/showthread.php?t=40933&page=6 and I couldn't find the driver I'd allegedly installed anywhere when I tried to add the printer.
    Any help would be greatly aprpeciated.

    Thats a good thought on the 1012. Actually, I believe all of teh HP LJ 1010 series printers will use the same driver.
    I'm having an HP related printing problem as well... quite different than this, but driver related all the same. THe other thing that makes me mad is that HP usually packages their drivers in an installer... you can't just get to the individual driver file. So if your trying to install anetworked printer and the printer isn't in Apple's Pick list, you can't install it. Pointing to the disk does no good because the disk just contains the compressed installer. (And most of the "home marketed" HP printers are only supported through USB or a direct connection these days, so you are SOL.)
    I'm anxious to try that driver link posted above and see if it will help me... Though I'm away on business right now and will have to wait to get home to give it a go.

  • Network HP Laserjet is no longer accessible by my iMac and Macbooks after OSX upgrade.

    My HP Laserjet 4100n is no longer accessible over my wired/wireless network from my iMac and Macbooks.  This is new since I upgraded to OSX 10.6.8.  The printer works fine from my old windows laptop.  Thanks in advance for any help.

    appears that apple has changed SMB code, and now its not possible login from windows on mac.
    i installed snow leopard and now works fine.
    apple is capable to make it run paying new license of smb code, but isnted of this, apple has created new protocol smbx and now, all others need to adapt your code to apple..
    bad movement.. i am thinking sell imac and no back to apple anymore..

  • [SOLVED] cups and laserjet 1018

    Hi all,
    I've been trying to use cups to set up a Laserjet 1018 with no success. The problem I'm having is that, even though according to the CUPS web interface my job is completed, my printer doesn't print anything. That's what I tried so far (based on the archlinux entry on CUPS and forums):
    - I installed the drivers hplip and foo2zjs.
    - cups is in my daemons array.
    - I tried to stop and start usblp module.
    - the device node permissions are correct.
    That's the output of my /var/log/cups/error_log (I'm using "LogLevel debug" in my cupsd.conf):
    D [25/Jun/2011:21:30:05 -0600] cupsdReadClient: 16 POST / HTTP/1.1
    D [25/Jun/2011:21:30:05 -0600] cupsdAuthorize: No authentication data provided.
    D [25/Jun/2011:21:30:05 -0600] cupsdReadClient: 16 1.1 Get-Jobs 1
    D [25/Jun/2011:21:30:05 -0600] Get-Jobs ipp://localhost:631/printers/Hewlett-Packard-HP-LaserJet-1018
    D [25/Jun/2011:21:30:05 -0600] [Job 1] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 2] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 3] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 4] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 5] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 6] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 7] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 8] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 9] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 10] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 11] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 12] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 13] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 14] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 15] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 16] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 17] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 18] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 19] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 20] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 21] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 22] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 23] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 24] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 25] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 26] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 27] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 28] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] [Job 29] Loading attributes...
    D [25/Jun/2011:21:30:06 -0600] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/Hewlett-Packard-HP-LaserJet-1018) from localhost
    D [25/Jun/2011:21:30:06 -0600] cupsdReadClient: 16 WAITING Closing on EOF
    D [25/Jun/2011:21:30:06 -0600] cupsdCloseClient: 16
    D [25/Jun/2011:21:30:06 -0600] PID 2503 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
    D [25/Jun/2011:21:30:06 -0600] cupsdSetBusyState: Not busy
    D [25/Jun/2011:21:30:36 -0600] cupsdReadClient: 12 WAITING Closing on EOF
    D [25/Jun/2011:21:30:36 -0600] cupsdCloseClient: 12
    Any suggestions are more than welcome!!
    Cheers,
    Last edited by falsum (2011-06-26 12:39:10)

    owain wrote:I had trouble with another LaserJet (the 1005), until I realised that as well as installing hplip, I needed to run 'hplip -i' (as root) to get it to download the necessary firmware.
    For some reason, I don't have a "hplip" command (I searched for this file in every folder).

  • HT1338 i have a macbook air and need to install a hp laserjet 1018 drivers

    hi i have a mac book air and need to install drivers for hp laserjet 1018 and dont seem to be having alot of luck!

    Latest are at http://support.apple.com/kb/DL907.

  • HP LaserJet 1018 printer and windows 7Ultimate 32bit

    I have HP LaserJet 1018 printer and it hasn't any problem when I used windows 7 professional but problems started when I replaced it with windows 7 Ultimate 32bit , In the beganning the windows didn't detect its existance so I ran the Hppsdr tool but it didn't help so much it convinced me that the problem in the USB cable so I bought another one and another for the power and the I downloaded the driver and even a setup called hp laserjet solution but it also doen't help so much the chance that the  problem related to the hardware is imposible because I visit the maintance shop and the Beleive or Not it worked so fast without any mistakes , Now the problem definetly related to the software especially that the windows detected the printer and when I start to give the print order it stuck in the queue for a long time even if it the test page by the way also I tried to use the cleaning utility but it doen't work also as it encountered an error I don't now . The printer seems so dead now .....Help me please.

    Hi,
    Looks like there is a driver conflict on the computer....
    What i would suggest is to remove all of HP printer S/W and install it back...
    Go to control panel>add or remove programs> uninstall any program related to the HP printer....
    Restart the computer and reinstall the printer S/W
    Hope this works.......
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • HP LaserJet 1018 will not work on my iMac G4

    Hello,
    First of all i would like to thank to anyone who replies to my thread. So here's my issue - i havve brand new HP LaserJer 1018 Printer. Unfortunately i can't find exact drivers for it therefore i'm instaling the printer using the default HP drivers which are in the printer browser list. My iMac recognizes the printer and when i choose driver (Gimp-Print v5.0.0-beta2) which is the only one available, everything seems to look ok. Anyway when i want to print a document the printer doesn't responde at all. But even with the printer not responding, the printing quewe starts to print and in 10 seconds it says that the printing is completed. Ofcourse no printing occures.
    Please tell me how can i solve this problem, because i love my iMac and i don't want to be forced to use my printer on PC.
    Thanks a lot in advance to anyone who can help.
    George

    I had the same problem on my G5. Since when doesn't HP support mac?
    The generic drivers suggested- as well as a few others don't work. The Printer window displays that the info is getting to the printer- but nothing prints.
    g5 dual 2.5   Mac OS X (10.4.6)  

  • Is Printer HP Laserjet 1018 compatible with Airport Express and windows

    I am using HP Laserjet 1018 which is connected directly to the PC.
    As it is a USB printer but not a wifi one, can I connect it to Airport Express and will it be recognised ?
    Thank you for your answers.

    Hello TigerParis75,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    AirPort Utility 6.x: Use a USB printer on your Wi-Fi network
    http://support.apple.com/kb/PH5114
    Just make sure you have all the updated version of the drivers.
    Best of luck,
    Mario

  • HP LaserJet 1018 and Windows 8.1

    Hello,
    I was trying to select the "Print directly to the Printer" option under my 1018's printer properties, but I keep getting the following:
    "Printer Properties
    Printer settings could not be saved
    The specified datatype is invalid"
    Can anyone instruct me as to how to fix this?  Please let me know ASAP.  Thanks!

    Hello Candi_970,
    Welcome to the HP Support Forums!
    I see that when you try to set the printer setting "Print directly to the Printer" for the Laserjet 1018 on Windows 8.1, but it will not allow it.
    You could try running the Print and Scan Dr on the computer. This will not allow you to set the "Print directly to the Printer" setting, but it could fix a driver or software issue the is preventing it.
    Let me know if this has helped.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How to share a HP Laserjet between a iMac and a PC Laptop

    I have been sharing a HP Laserjet 1200 between my iMac and a Toshiba Satellite laptop for years by using the USB port for the iMac, and using the parallel port for the PC. This has worked great for years. I've just purchased a new laptop, and it no longer has a parallel port. Is there a way for me to still connect the printer to both computers? I also have a Color LaserJet 2600n, does the 'n' means wireless? The 2600n is only connected to the iMac, being I don't use it much. Most of my printing comes off the Laserjet 1200, for both computers and would really like to keep it like that. I've also just purchased Snow Leopard for the iMac, just haven't gotten a chance to install it yet. Upgrading one machine at a time. First I need to print from both machines. Any help would be appreciate it! Thank you.

    Hi Barney,
    Finally got a chance to download Bonjour for Windows to my laptop late last night, and after a few tries (to get the correct driver for that old HP1200...), it worked! The original driver disc wouldn't work, guess it was just too old. But was able to get one from HP web site. Anyway, thank you so very much. Though I have to make sure the Mac is on when I want to print from the laptop, as the printers are on sharing, they're right next to each other and I tend to work off both at the same time anyway, so it's not a big deal. Sometimes over the weekend, I will play with the wires some more to do what you and Bruce suggested, and make sure the mac and the 2600 is connected via Ethernet, not USB. Right now the 1200 is connected directly to the Netgear, but doesn't seem to work as a server. Oh well. Again, thank you for your suggestions. It was of great help!

  • Laserjet 1018 paper feed problem - started suddenly and now wrinkles paper but does not feed it in

    This HP Laserjet 1018 is 4 years old, has worked flawlessly.  But a day or two ago it fed a sheet of paper, there was a ripping sound, and the paper emerged, printed, but with a 1/4" wide, 5" long missing bit near the bottom, running the long way of the paper.  I found and removed the crinkled up torn strip of paper, and have restarted this printer numerous times.  Since that incident, it refuses to feed paper correctly, but bunches it up and wrinkles it a bit from the left to right and does not feed it in.  Thus, won't work.  I can't see any broken parts or anything stuck inside -- and taking this printer apart is v. complicated -- no easy panel to remove to see the feed mechanism.   I'm doubtful I can take it apart enough, and still get it back together.  I've cleaned the feed roller (small half-round gray rubber thing) and it does not seem to be the problem.
    Questions:
    a) anyone experienced, and solved this problem?
    b) is it worth trying to send this for repair (I got it on special for $69, and the replacement equivalent now appears to be the HP P1102w, which is selling via Amazon for $94.99
    Thanks

    Hi.  Thank you for your post.
    The following link at the HP Customer Care web site may provide some help on the paper feed issues you are seeing.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=110&prodS...
    Although I am an HP employee, I am speaking for myself and not for HP.

  • HT1338 I just purchased an iMac and an HP LaserJet M1217nfw printer.  The iMac will not recognize the disc that came with the printer.  What can I do?  This is my first Mac and just might be my last.  Installation has not been fun.  I would appreciate any

    I just purchase an iMac and an HP LaserJet M1217nfw printer.  I could not install with the installation disk that was furnished by HP.  This is my first Mac product and I'm just not sure what I'm doing...help!  I don't know if it's a mountain lion, a tiger, or a dog!  The box says OS X. I really need help.  Thanks for your time.

    What Mac operating system are you running on your iMac?
    Are you certain they're compatible?
    Have you checked with HP to see if there's a newer driver?
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4 075472
    In addition, I haven't loaded on any software with my last 3 printers.  They just work without them, IMHO.
    But a current driver would be necessary.

Maybe you are looking for