IMac and Macbook Pro Networking Issue
Just recently both of my Macs have developed a wierd networking issue. I am sharing folders on my Windows server (WHS), now this odd slow issue appeared when using a file from the server. It acts like my network is really slow when opening a file, but my windows machines work fine on it.
I have not made any changes to the server, I am running a Gigabit Cisco network (not linksys) in my home and this thing has got me stumped. I installed an anti-virus on the iMac and it found nothing. Either wired or Wireless I see the same results but only related to the Mac's..... does anyone have an idea what might be doing this? I am kinda a Mac noob in most aspects so I am looking for any help here.
It very well could be the antivirus app, most are intrusive and debilitate rather than enhance performance and should be removed using the developers instructions. You haven't really told us anything useful such as any settting you may have changed. However if you began working backwards resetting any changes and uninstalling the apps added since the performance issue started then you probably will find your issue.
Similar Messages
-
Hi!
I have 2 IMacs and MacBook Pro and can not work simultaneously on FCP on all workstations when the network port is open. Can anyone help me on this?Did you purchase Final Cut Pro from the Mac app store? Or install it from disk? If from disk, you may have installed it on all machines using the same serial number, and using all of them simultaneously violates the license agreement. If you purchase from the App store the licensing is different and that may not apply.
-
Network imac and Macbook pro Via ethernet
Hello
I am traveling with my imac and macbook pro. What is the step by step procedure using and ethernet cable to access both computers by setting up a network?
Thank You
DickEverything you needed to know is right here:
http://support.apple.com/kb/HT1549 -
Imac and Macbook Pro reset parameters issue
Looking for advice please.
Both my Imac and Macbook pro have not resonded upon startup and I have had to reset the paramters on several occassions.
Can anyone advise why this may have happened. Both computers less than 4 months old.
ThanksSometimes files get corrupt or lose their permissions this is normal part of most operating systems. When you lose permissions to a file it will not let you read or write to that file. This can cause problems with your system because to do work on your system you need to have access to read and write to some files.
-
IMac and Macbook Pro no longer connecting to the Wifi?
Hi there,
I've been in London this weekend, only to return home to find issues connecting to my wifi. Weirdly, it's only the iMac and Macbook Pro having trouble, everything else is connecting fine e.g iPad, Phone, Android Tablet etc.
I'm getting disconnected around every 20 seconds and cannot figure it out! It's so frustrating as I'm wondering if there's been an update released for OS X that it has downloaded recently? Especially seeing that when I run windows from bootcamp on my iMac, it doesn't disconnect. And I also don't believe it's an issue with the hub.
Has anyone got any suggestions? I've tried removing the network and re-adding, help for about an hour but still not much use.
Thanks, MattWi-FI connection drops
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wi-Fi Problems in OS X Yosemite (3)
Wireless Diagnostics
Also try turning off Bluetooth. -
Home sharing iMac and MacBook Pro: not all songs are playable
Hello
I set up Home Sharing between my iMac and MacBook Pro so that I could stream the music that's on the iMac to the MacBook Pro. On the MBP there are no songs, all of them are in Apple Lossless format on my iMac. I first tried to use "‘share my library on my local network" but because I wanted the play count to go up as well I chose for "Home Sharing". Setting up was simple. After all preferences were adjusted, I opened iTunes on the MBP and it immediately found the shared iMac library. There's now only one problem: not all songs are playable. Some don't even start. How is this possible and what do I need to do to resolve this?
FYI: the iMac is connected via ethernet to my cable modem which sends a wireless Wi-Fi signal to the MBP. Signal quality is excellent.
Also, is it possible that playcount is only available with Home Sharing and not with "share my library on my local network"?
Thanks!It very well could be the antivirus app, most are intrusive and debilitate rather than enhance performance and should be removed using the developers instructions. You haven't really told us anything useful such as any settting you may have changed. However if you began working backwards resetting any changes and uninstalling the apps added since the performance issue started then you probably will find your issue.
-
My new IMac and Macbook Pro are each loaded with Mountain Lion. Have Office for Mac also
When I try to see my Grandson on webcam out of state the login will not activate. For PC use I needed Java and Active X to let it run. My Java is checked as ready to go but nothing happens. Otherwise these are great computers. Please help me through the process. The Geniuses at my apple store can't understand what to do.
[email protected] or [email protected]By default, OS X does NOT come with Java installed nowadays. You need to open the Java Preferences app found in Utilities; when you do that the first time, it will inform you of the fact and offer to install the product for you.
Afterwards, due to a major security issue we had back in the first quarter of the year, the plugin is disabled by default. You need to revisit the Preferences and enable manually. It will auto-disable if unused in awhile.
Lastly, you may have to adjust which Java instance is being used, the 32-bit or the 64-bit. Default is 64-bit, but some applets crash & burn or outright refuse to run in such a platform. You can prioritize which version you prefer by dragging on top in the Preferences. -
What's the best way to share my Aperture and FCPX projects between an iMac and MacBook Pro?
Greetings,
I own both an iMac and MacBook Pro and I'm interested in figuring out the best way to have access to my iTunes, Aperture and Final Cut Pro X files not only when I'm at home using the iMac, but when I'm out and about with the MBP.
I'm sure there are others among us who require a similar setup so I was hoping you guys could share with me how you solved this little problem, and also inform me of any potential negatives for your method so that I'm well prepared. Thanks.Best is a subjective term, as it will ultimately come down to preference. The fastest however, would be to wait until they market has a few thunderbolt drives available for purchase...
But like the first poster stated, a firewire 800 drive, would be the more convenient choice for now. Or you could set the shared folder on your iMac to be avaible on your network and use it to allow your MBP to access it wirelessly.
Obviously whatever you change, just save it back to the same folder on the iMac. Keep in mind it will not be as fast as the first suggestion (unless it is a wired network), but may be usefull for smaller files.
However, you should have everthing backed up via an external drive, that is always useful... -
CS3 License on Imac and MacBook Pro
Hi
I have 3 licenses for CS3 Design Premium. Two of them are used on a PC and one of them on my machine (Imac).
Now I have recently purchased a Macbook Pro and I want to use the same license as that on the Imac for my laptop. Can I do it?
I am assuming that both machines should not be used simultanously. Now when I am travelling with my Macbook, my fixed machine (Imac) is not really used by anyone else but there are chances that someone might just browse through and use CS3 occassionally. In that case am I breaching the contract?
Is there a method where only when I log in then I can use CS3 on the Imac? This would ensure that while I am travelling people can use my Imac as a guest login but not use CS3.
In any case, my first requirement is can i install my single license on an Imac and Macbook Pro?
regards,
AlimI have the exact same problem. iCloud drive on my iMac and macbook pro contain some of the same files, but not all.
Files that haven't synced are several days old rather than weeks to months old, so possibly this is a verrrry slow sync issue hopefully. -
Connection failures between iMac and Macbook Pro
I'm experiencing frequent connection failures over my wi-fi network between my iMac and Macbook Pro on an otherwise strong, stable network. I can connect both of my computers to the Airport Time Capsule that I use as my wireless router without a problem, but for some reason I get connection failures between the computers say, 50% of the time. Sometimes it works fine, others it just hangs before giving me an error message. Any suggestions?
OS 10.9.3 on both machines
Apple Airport Extreme Time Capsule
iMac, 3.06GHz i3 (2010)
Macbook Pro Retina, 2.4 GHz i7 (1st Gen)Hi jt in nyc,
Some checks:
Use Airport Utility on one of the machines
- Click on the Time Capsule ( enter password if prompted )
- Click on the Edit button
Under Airport Utility -> Wireless -> Wireless Options
Are the Time Capsule Wireless options set correctly?
- Country -> you know this, change if it is not
- 2.4GHz and 5GHz Channel set to Automatic
- Click on Cancel button to return to the Airport Utility graphic diagram.
- Click on the Time Capsule
- Click on your machines listed beside wireless clients
Are the machines reporting an excellent quality at different distances from the Time Machine? -
Airport extreme loses internet connection all the time with imac and macbook pro
I keep losing the internet connection with airport extreme on my imac and macbook pro but NOT with my pc
Ok, so when you say you lose internet connection, is it disconnecting from your wireless network so there are no bars?
And are there usually full bars? -
Connecting iMac and MacBook Pro using a non-Apple wireless router
I use a Belkin wireless router. Is there any way for me to connect iMac and MacBook Pro using the router to share files? I think I read somewhere that I need AirPort Extreme for this, but I'm not sure. Thank you.
Great resource from Dennis...file sharing, I.e. networking, is a function of the operating system settings and not the brand of router. Using Mac OS X 10.6 on both machines makes it really seamless. Following Dennis's kb article should make the two almost act like one machine.
-
ICloud Sync problems on iMac and MacBook Pro
When I add files to my iCloud/pages folder on my iMac, those files will not download on my MacBook Pro. When I add files to iCloud/pages folder on my MacBook Pro, those files will not download on my iMac. The files do show up on iCloud.com. I am using the same apple id on both computers. If I create a file on my iMac it shows up on my MacBook Pro but there is a cloud with a down pointing arrow next to it, but it never downloads. Vice versa is true if creating files on my MacBook Pro. If I create a folder on iCloud drive (iCloud/Folder) and put files in it they seem to sync properly, but files in subfolders created inside iCloud/Pages are the ones that do not sync properly. This makes iCloud Drive very unreliable for me. Help please? Thinking of going back to Google Drive to keep my files in sync across my iMac, MacBook Pro, iPhone 6, and iPad Air.
I have the exact same problem. iCloud drive on my iMac and macbook pro contain some of the same files, but not all.
Files that haven't synced are several days old rather than weeks to months old, so possibly this is a verrrry slow sync issue hopefully. -
Imac and Macbook pro can no longer see one another
I'm not sure why, but all since I upgraded to Yosemite, I can no longer see my iMac on my Macbook Pro and vice versa. I could always see the computer that I needed to connect to in finder, or I could connect with my iCloud password. As of today, I can no longer access my iMac from my Macbook Pro and that's a problem. If someone could provide directions (dumbed down version) explaining how to connect the computers from scratch, I would greatly appreciate it. I am fine with setting it up again but I can't recall how I did it. Thanks so much. I did upgrade both my iMac and MacBook pro to Yosemite over the weekend.
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 4 G
SMC Version (system): 1.59f2
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 4 GB
SMC Version (system): 1.59f2Ensure Sharing preferences are set correctly for both devices.
-
My Imac and macbook pro stopped accessing my MP640 via the home wifi set up, so I sent all the canon software to the trash on both computers, thinking I should reinstall the software I got with the printer, but the software does not recognise os 10.7.5. I am using a netgear modem. I also use time machine to back up to time capsule.
Your Canon Pixma MP640 driver:
http://support.apple.com/kb/DL899
Maybe you are looking for
-
i downloaded ios7 my iphone 4s now isnt working i am unable to slide to unlock my iphone, yet my lock button at the top of my phone is broken and has been for sometime so i have been using the accessibility feature to lock and switch off my iphone i
-
Printing PDF file using lp gives garbage output
Hi, We have an HP printer which was working fine till last week, printing everything. Now, the normal text file prints are printing fine, but when a PDF document is sent for printing the output is kind of garbage with strange characters and isnt what
-
i have a bc4j-web-application. i have deployed the jsp-application to the oc4j, running on my windows system. but after opening the jsp page, i got following error: oracle.jbo.JboException: JBO-33001: Cannot find the configuration file mypackage \com
-
Copying, and using, sparse bundles across OS X systems
I have a laptop that I use for work, a MacBook Pro 17", on which I have two folders full of data that needs to be secured. I set up two SparseImage files using Disk Utility and copied all data into these file systems, deleting the originals. This wor
-
INITIALIZING DOWNLOAD BLOCKED BY FIREWALL
I didn't recognize the I.D. seeking access. It was not identified as Adobe. Now the initializing program does not trigger the Norton Personal Firewall permit-do not permit window and invariably fails to connect to its home site. any suggestion?