Imac and snow leopard

I've just installed the mac os x snow leopard (version 10.6.3) tune up on my imac (not the whole package just the tuneup) and now it takes almost 10 minutes to boot up - how can I speed it up? Also, when it's 'gone to sleep, I can't wake it up again.

For starters I would highly recommend continuing the updating process and run the Combo Updater for 10.6.8 to take advantage of the bug fixes and efficiency enhancements found in it.  That very well may alay some of your problems.
Hope this helps

Similar Messages

  • 2008 iMac and Snow Leopard

    My parents bought a new 20 in iMac this February with a ATI Radeon HD 2600 Pro Graphics Card. It was their first Mac previously having used PC's. I was looking at the Snow Leopard specs last night, as they will ask whether they should get it and it clearly says that Open CL will only work with the ATI Radeon 4850, Radeon 4870 or more recent NVIDIA cards used in the iMacs introduced this year.
    I was a bit shocked at this, surely there must be some mistake. OK my 5 year old G5 won't run Leopard, but to find that a six month old iMac won't run a core Leopard component is, well, not very impressive. So Leopard will boost your Mac's performance but only if you bought it this year. I have to admit I'm beginning to wonder about Apple.
    Can anyone tell me whether Snow Leopard will boost performance on this iMac at all?

    OpenCL is not a "core" Mac OS X component. All it does is allows developers to use a Mac's graphics hardware (the GPU) to do some non-graphics processing in certain situations, basically off-loading some types of work from the CPU. But the primary purpose of the GPU is to accelerate graphics processing, and Snow Leopard supports the OpenGL every bit as well as Leopard. Also, to take advantage of OpenCL, developers have to figure out where they can apply it, and recode their applications to use this new capability. That's going to take time.
    Therefore, Snow Leopard will immediately make your parent's iMac run better, more efficiently, in many ways not related to OpenCL, due to the different areas of optimization. Lack of support for OpenCL does not make that iMac any slower when upgraded to Snow Leopard, it just just a non-factor, something that does not apply. There will be no impact from OpenCL even on supported Macs until developers learn how to use this capability and update their apps.
    It is the same as any improvement Apple makes from one generation of iMac to the next. The 2008 iMac supports 4GB of RAM (officially), the 2009 iMac supports 8GB of RAM. The 2008 iMac can connect a 24-inch second display, the 2009 iMac can connect a 30-inch second display. The 2009 iMac has larger hard drive storage options. And so on...

  • Upgrading to iMac and Snow Leopard

    I am considering buying a new iMac, and am concerned about what applications I currently own and run on my G4. I am using OS 10.4.11, and am not sure what apps will translate with the updated Mac OS and Intel processor.
    Here are the Apps: Adobe Illustrator CS, Adobe Photoshop CS, Corel Painter IX, Hexagon 2 (Carrara product), Toast 6 Titanium, Appleworks 6, and Dreamweaver MX.
    Any assistance or advise will be greatly appreciated.

    HI,
    Go here for information for upgarding...
    Topic : When updating to 10.6 or 10.6.1 please remember the following
    You need to go to each vendor, ie., Adobe, Corel... and so to make sure the version you currently have will run on Snow Leopard.
    How-To: Upgrade To Snow Leopard — The Right Way
    Also, any peripherals you might be using now like printers/scanners/cameras... check the vendor site for those also for SL compatible drivers or software you may need.
    Carolyn

  • The icons on the dock (and some other places) sometimes appear in low resolution, I'm running Lion on my iMac and Snow Leopard on my Macbook pro, got the same problem on both, anyone?

    A few days ago I noticed that safari icon was in "low resolution", so then I deleted and put a new one in place, but after tahat I've been notice that otheres are doing the same, on my macbook pro (running snow leopard) the things are worse, sometimes even the shortcuts to applications and downloads show with the same problem. Could this be a virus???

    Likely a corrupted cache file
    Read the
    Deeper cache cleaning/resetting
    https://discussions.apple.com/docs/DOC-3046

  • No Time Machine animation - 2007 24" iMac and Snow Leopard (10.6)

    I am not getting the spinning stars animation when I enter time machine restore interface on my 2007 24" iMac. This Mac has the ATI Radeon HD 2600 256 MB Graphic Card. I just a white screen. I deleted the time machine prefs and I still do not have the spinning stars interface. I used to get it in Mac OS 10.5.8. Thoughts.

    nowak66 wrote:
    Okay - it took a while but I went through all the steps in the troubleshooting guide under E4.
    Still does not work. I get a white background where the spinning stars animation should be. Other than this visual, the data restore function works fine.
    Any thoughts?
    It's a long shot, but might be related to your video card.
    Try running the *Apple Hardware Tests.* (Instructions should be printed on the disc; if they differ from these, follow them instead)
    1. Disconnect all external devices (including the Ethernet cable) except the keyboard and mouse.
    2. Insert the "Additional Software & Apple Hardware Test" disc that came with your computer.
    3. Restart while holding down the "C" key. When the list of available startup volumes appears, click Apple Hardware Test and the right arrow.
    4. When the Apple Hardware Test main screen comes up (after a moment), follow the on-screen instructions.
    +(note that when your Video RAM is tested, various patterns, colors, and stripes will appear on the screen).+
    5. If it detects a problem, an error code will be displayed. Make a note of it.

  • Best practice for iCloud across Lion and Snow Leopard

    Hi all,
    I'm not going to bleat about SL not supporting iCloud. I understand the business model.
    However, I'm wondering if any of you are in the same shoes as me and, if so, how you handle content management across iCloud compatible and incompatible devices.
    I have Lion on our 6month old iMac and Snow Leopard on my 6 year old Macbook.  This Macbook is still incredibly fast and reliable. I program websites across both devices using software like Coda 2, Transmit, etc etc...
    I'm a huge fan of the cloud and, while I can use dropbox on all my devices, I kinda like the inbuilt functionality of iCloud more.  (Plus I have more space there). Just wondering what workflows people are using to try and sync and work with content across compatible and incompatible devices.
    Cheers,
    Danno

    Danno. wrote:
    Hi all,
    I'm not going to bleat about SL not supporting iCloud. I understand the business model.
    However, I'm wondering if any of you are in the same shoes as me and, if so, how you handle content management across iCloud compatible and incompatible devices.
    I have Lion on our 6month old iMac and Snow Leopard on my 6 year old Macbook.  This Macbook is still incredibly fast and reliable. I program websites across both devices using software like Coda 2, Transmit, etc etc...
    I'm a huge fan of the cloud and, while I can use dropbox on all my devices, I kinda like the inbuilt functionality of iCloud more.  (Plus I have more space there). Just wondering what workflows people are using to try and sync and work with content across compatible and incompatible devices.
    Cheers,
    Danno
    There are some hacks to using iCloud with Snow Leopard. One of the keys is you must use iCloud as your primary source for Contacts and Calendars. That is, when you want to make additions or changes to either your calendar or contacts you really MUST do it from the web interface to iCloud. Otherwise you may wind up with duplicates.
    See the article here: http://bit.ly/LvVCR2

  • Microsoft Office 2004 (Word) unable to save files  I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

    Microsoft Office 2004 (Word) unable to save files
    I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
    So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
    How can I get rid of this error message?

    Look, I realize you might have to get your machine working, so this is how you revert back.
    Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
    #1 Backup your personal data off the machine.
    Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
    Disconnect all drives now to prevent any mistakes from occuring.
    #2 Reinstall OS X 10.6 from disk
    Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
    Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk  of your internal drive  (do not format or erase!!), Quit DU and simply re-install 10.6.
    Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway)  or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
    #3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
    Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
    #4 Reinstall any non-working third party programs
    When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
    If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
    https://support.apple.com/kb/TS2570
    That's it really.

  • I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

    IS THE SITUATION HOPELESS
    I used Target mode to transfer files to a new i7  iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
              Please tell me how to get this disc to eject !

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • I have an imac with snow leopard. I do not have enough memory to get lion. I switched my  mail  to icloud and now my ipod touch has icloud.  i can receive mail on my ipod touch and through the icloud web site, BUt I cannot receive mail on my mac directly

    I have an imac with snow leopard. I do not have enough memory to get lion.
    I switched my mail  to icloud and now my ipod touch has icloud.
    i can receive mail on my ipod touch and through the icloud web site, BUt I cannot receive mail on my mac directly any more. There is an exclamation point on my mail in box and also an ! on .mac.
    Can anyone help me with settings so I can receive mail again directly on my mac?
    Thanks
    Mathmarv
    <Edited by Host>

    See this Apple note on troubleshooting icloud mail: http://support.apple.com/kb/TS4002
    You may have seen this page already: http://www.apple.com/support/icloud/mail-notes/

  • I upgraded my 3 yr old iMac to Snow Leopard and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site, but still no joy.  Any suggestions?

    I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site and installed them, but still no joy.  Any suggestions?

    aspaceman,
    Perhaps I owe you an apology.   Having re-read that downloading from HP was unsuccessful I feel uncomfortable.  Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
    Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply.  

  • My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive.  Can't get it to run Hardware Test.  Disk Utility says disk OK - files are there. What can I do?

    My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard.   I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host.  But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning.  I can't get it to run Hardware Test - just get the white screen.  If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

    Hi-NRG Bwoy wrote:
    I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
    Reet the SMC and the PRAM
     Cheat sheet to help diagnose and fix your Mac
    Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
    clean the disk.
    If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    How to erase and install Snow Leopard 10.6

  • Is there a way for my macbook air (running Lion) to access an external hard drive on my Imac (running snow leopard) specifically for Iphoto and itunes?

    Is there a way for my macbook air (running Lion 10.7.2) to access an external hard drive on my Imac (running snow leopard 10.6.8) specifically for Iphoto and itunes?

    Yes. For those two applications specifically there is sharing. This presumes both computers are on and connected to the same network.
    In iPhoto, enable sharing by (on the iMac) going to the iPhoto menu > Preferences > Sharing > check Share my photos. You can either share the entire library or only selected albums. Now on your MacBook Air, in iPhoto, go to the same preference pane and select Look for shared photos.
    iTunes has something similar. In the iTunes menu > Preferences > Sharing > check Share my library on my local network. On the other computer, look in the left column for SHARED and select the iMac. You can now play that music on the MacBook Air.
    There are other ways to share files but for those two applications this is the simplest way.
    Best of luck.

  • I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

    I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

    Move your content to a new Mac - Apple Support

  • I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    Thanks for the reply.  I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long.  After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix.  I strongly suggest not to buy this product.

  • I want to upgrade iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with the 15" MacBook Pro that totally died, and upgrade iMac from that DVD

    I want to upgrade my iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with my purchase of the 15" MacBook Pro that totally died, and upgrade the iMac from that DVD that came with the laptop ?   Thanks

    No, that 10.6.3 DVD is system specific to the MacBook Pro.
    You need a Snow Leopard Upgrade > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
    or if a MobileMe users > Apple throws MobileMe users a free version of Snow Leopard

Maybe you are looking for