Imac as airport base station?

i have been told it is possible to use the latest generations of imac as a wireless base station instead of having to go out and buy a extra wireless router, is this true and if so how can i do it?
thanks

1. In Sys Prefs/Sharing highlight Internet Sharing (do not check the box)
2. Share your connection from: Ethernet (from the dropdown menu)
3. To computers using: AirPort (check the little box)
4. Press the button AirPort Options...
5. Name your Network
6. I use Automatic for the channel
7. I encrypt my network using a 40-bit WEP key
8. For a non-Apple device you must use;
a. only a 5 alphanumeric character, 40-bit WEP password or
b. only a 13 alphanumeric character 128-bit WEP password
9. Press OK
10. Check the box for Internet Sharing
11. Answer any dialog boxes that pop up
Dah•veed

Similar Messages

My TP-LINK TD-W8970 router cannot connect with my iMac even though my iPhone 5, iPad 3, W7 laptop and LG smart TV can. I get the message "No configured AirPort base stations have been found". Any ideas please?

My iMac cannot connect to my TP-LINK TD-W8970 router even though all other computers can. I get the message "No configured AirPort base stations have been found" and "No PPPoE configurations were found". Any ideas please?

Open the Network pane in System Preferences. If there's a closed padlock icon in the lower left corner, click it and enter your administrator login password when prompted.
At the bottom of the service list on the left is a popup menu with a gear icon. From that menu, select
Set Service Order...
A sheet will drop down showing all listed services. Drag the one that you want to use to connect to the Internet to the top of the list. Click OK to close the sheet, then close the preference pane and confirm when prompted to save the change.

Airport Base Station No Longer Found in Network

Since applying the 10.5.2 upgrade yesterday my home network, routed via a cable modem and a formerly dependable original Airport Base Station, is no longer recognized by Airport Utility... and the Airport icon in the finder is continually scanning. I have found, however, that my network shows up as an available option in Network System Preferences...with a Connected status and an IP address (10.0.1.3).
I can connect to the internet and read email from my main iMac because I am also connected directly via ethernet, but my laptop can't find the Airport base station, either. I have reset, unplugged, restarted, check connections and cables, etc. Both Macs easily find my Airport Express, however. I'm concerned the new update no longer supports the original base station...
On another (unrelated?) note, my external backup HD (250GB Seagate), connected by Firewire, is now recognized as "Read Only," whereas it has always had read/write permission (confirmed in Get Info). So now my backup is failing, too. Sorry to introduce a new topic, but I'm frustrated!

Firmware is uploaded onto the base station itself and is different from AirPort Utility. Although you probably cannot confirm it without connecting to the base station, I think it highly unlikely that you use a firmware version earlier than 6.1.1 (which came out in 2004). If newer firmware is contained in software on your computer, AirPort Admin Utility and/or AirPort Utility should have prompted you to upload it to the base station, whereas if it is not on your computer, Software Update (assuming you use it) should have prompted you to obtain it. Even if your firmware is older than version 6.1.1, the reset procedure is virtually the same--in that case, you won't see the AX's status LED flashing rapidly a few seconds after you start holding the reset button, and you will just need to hold the reset button for 10 full seconds.
Once you connect to the base station, you should be able to see the firmware version (e.g., "Base Station Vx.x" where x.x is the firmware version) on the opening screen of AirPort Admin Utility for Graphite and Snow, when the base station is highlighted. I imagine that AirPort Utility shows similar information. I believe that in AirPort Utility, you can also check to see if newer firmware is available from Apple (choose "Check for Updates" in the AirPort Utility menu). To the best of my knowledge, the most current firmware version for AirPort Express is 6.3.

Airport Base station or Airport express to use wirelessly for dial up ?

I have an Ibook G4 1.33 with a Airport extreme card.
I currently have it set it up to the wireless modem that my phone company provided for me for my DSL service.
Unfortunately I am moving to an area that does not have DSL service. I would like to know if I can set up my Ibook to use it wirelessly and have it connected to an Airport base station or Airport express in order to have my dial up service to work wirelessly???? So Airport base station or Aiport Express?? Many Thanks in advance- Geof
IBook G4 1.33 12 1.5GB, Vintage Imac , Ipod with video, Ipod Nano Mac OS X (10.4.3)

The only base station with dial-up capability (in addition to traditional ethernet equipped modem capability) is the AirPort Extreme Base Station w/modem. Check the Apple Store to look over the details, and make sure you are looking at the AEBS with the modem (there is also a version without a dial-up modem which will not work in your application).

Why does my Airport Base Station continue to disconnect?

It works fine until it just goes out. Every once in a while it just goes out at random times even though it is still connected to everything (computer, modem).I do this to create a wifi connection for my family and I. I have tried all of resets and it still goes out. I do believe it might be something internal. If so, can someone please elaborate more on this. If not, can someone give me some information on how to fix this. Thanks!

I see you are running Windows 7. Apple just came out with a firmware update for Airport Extreme (7.7.2). It so happens that this Firmware version requires Airport Software version 6.3 or newer. The Windows version only goes as high as Version 5.6 or so. I was also told that Apple is unlikely to upgrade this software. To make a long story short you need to control your Airport Base Station with an iMac, or an iPhone or iPad with the Airport app. This solved my problems. Good Luck :)

Airport base station agent process without the device

Hello,
just noticed that in the startup items of my macbook account I have an item labeled "airport base station agent".
However, I dont have an airport base station...
Since I'm having regular troubles with my wireless, I'm just wondering if anyone can suggest an explaination why the item is there, whether it might be an issue for my macbook wireless and whether should I remove it from the startup items or not.
Thanks.
Paolo

I ended up manually removing the AirPortBaseStationAgent.plist file itself from /System/Library/LaunchAgents/ and the AirPort Base Station Agent Process has stopped running in Activity Monitor ever since. I don't know how good of an idea this was to do but it solved the problem. My AirPortBaseStationAgent.plist file had this info in it:
<plist version="1.0">
<dict>
<key>EnableTransactions</key>
<true/>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/Library/Preferences/com.apple.AirPortBaseStationAgent.launchd</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.apple.AirPortBaseStationAgent</string>
<key>ProgramArguments</key>
<array>
<string>/System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent</string>
<string>-launchd</string>
<string>-allowquit</string>
</array>
</dict>
</plist>
It is an older plist file dated Dec. of 2008 which got transferred to the my iMac via the Migration Assistant in Jan. of 2009. This file somehow didn't ever seem to update no matter how I configured the AirPort Utility. The file "com.apple.AirPortBaseStationAgent.launchd" that it makes reference to in /Library/Preferences/ doesn't exist on my iMac.
Thanks,
Gerard

Adding password to old Airport Base Station.

I need to password protect the old Airport Base Station (dual ethernet). I have tried the support documents but it did not work. I have an express plugged in and my Airport Utility only sees that one. I have tried plugging the old base station into the iMac with an ethernet cable but then got stuck.
I'm using an iMac with OSX 10.5.4.
Any help?
Thanks.

Ok, the version you just downloaded should be compatible with both Tiger and Leopard. It's primary purpose is for administrating the old 802.11b AirPort Base Stations, both the Snow and the Graphite. The new AirPort Utility replaces both the AirPort Admin Utility and the AirPort Setup Assistant. So between the AirPort Utility and AirPort Admin Utility for Graphite and Snow, you should be able to administer any of the AirPorts.
Do you still happen to have the old AirPort Admin Utility or AirPort Setup Assistant installed on your Mac? If so, this might be the reason for the error message.

This AirPort base station was unable to extend the wireless network.

I have an AirPort Extreme in the lounge connected to BT infinity.
I also have an airport express in the kitchen connected to a stereo system.
I have had this set up for around 12 months.
The airport express will not extend the wireless network.
I reset it, restart, factory reset etc and it will work fine for around 3 days, then I get the same error message saying
This AirPort base station was unable to extend the wireless network. Make sure the wireless network you’re trying to extend was set up and is working correctly, that you entered a matching wireless network password into this device, and that this device is in range of the wireless network.
The express is situated easily within range of the extreme. And the airplay between those two, my iMac and two apple tv's works pretty much as it should.
Can someone please shed some light on this?
Maybe I have it in a wrong setting or summut....

G Beach wrote:
I am also experiencing a recent failure in my Airport devices no longer extending my wireless network.
My Aiport Express and second Airport Extreme were extending my wireless network for more than a year
The only change that has taken place lately is that the firmware for both devices was upgraded to 7.6.4, however the upgrade was only in response to trying to resolve this problem. Needless to say, the firmware upgrade did not resolve anything.
If I didn't know better, I'd have thought I wrote the above.
I have a TC from a few years ago (last one before the tower, I think), plus the older AEBS that it replaced extending the network, plus a 1-year-old Express also extending. I had upgraded them all to 7.6.3/4 when it came out, but reverted them all to 7.6.1 when everything went crapways (others having the same issues of the LAN regularly croaking), and didn't bother upgrading again since.
Today I just tried 7.6.4 on all of them, and it seemed OK at first with green lights all around in Airport Utility. Then I made one change, which was to enable 5Ghz on the main AEBS/TC only (the express doesn't need it, and the older AEBS can't do it).
The latter two started flasing amber and giving the "unable to extend wireless network" error message.
So I'm wondering if you are similarly using 5Ghz?

"AirPort Utility unable to find any AirPort base stations"

I am getting it, along with a blanked out options panel even as I am using the two AirPort base stations and the Airport Extreme that are installed in my house. This confuses me.
I get it on my 12" Powerbook with 10.5.2 installed, but not on the one that's still running Panther. I do not get it on the iMac running Panther.
So does anybody have any idea why my "updated" PB can't see the network it's using? I have had Bonjour and Rendezvous issues in 10.5.2, too, so I am guessing these are all related somehow.
I have not installed the most recent AirPort Utility because I am afraid it will throw me offline altogether. (Should I?)
All advice welcome.

I have the same problem. Two newer macbooks work just fine but an older powerbook that was running fine on the airport extreme now say no airport card installed. Any ideas for a fix?

Connect to Internet Without Airport Base Station or Other Wireless Router

I have an iMac G5 w/Airport Extreme card, an eMac w/Airport card (not Extreme), and an iBook w/Airport card (not extreme). The iMac is connected to the internet via DSL (direct Ethernet connection - no router). I can succesfully network all three computers for file sharing but can not connect to the internet over the network using the eMac or the iBook. Is it even possible to use the iMac as a wireless base station for the other two computers or do I have to buy a wireless router or Airport Base Station?
Thanks.
iMac G5 Mac OS X (10.4.5) eMac 10.3.9, iBook 10.3.9

no1bass, Welcome to the discussion area!
The best solution is to get an inexpensive wireless base station.
However, you can use the iMac to share the Internet connection. Go to the iMac's Sharing preference pane and enable Internet Sharing. If you have the iMac's firewall enabled, you will need to also enable Web Sharing or otherwise configure the firewall to open the correct ports.

Airport base station usb printer not working

I have a hp 5150 printer that is connected to an Airport base station. I have been using this connection for over a year without a problem. I used the printer this morning from my laptop after changing an ink cartridge. Everything seemed to be working fine. Printed some maps from the internet.
When I got home from work I tried to print some more maps and directions and I just get the red exclamation mark on the printer icon and a message that asks about the print que. The job gets stopped. I don't get it. How can it work fine in the morning and then just stop working. No one has access to change anything except me and I wasn't home. The printer will not print from my Imac or powerbook. I have deleted the job. Restarted the Imac. Checked the usb connection on both the Airport Base Station and the printer.
Imac G4 20 screen Mac OS X (10.3.8)

Figured it out myself

What kind of password (WEP, WAP, WAP2) to choose for Airport Base Station?

Hi,
I just got an Apple TV. I am using an Airport Base Station to connect to the Internet wireless with my iMac. So far without any password-protection (very neglectant, I know).
i want to password protect but I am getting confused on how to do this.
Can someone please explain in basic language, as I am not a computer-geek, how I should do this and what kind of password I should use. WEP, WAP, WAP2 - that's way to confusing for me. What should I use so that the ATV is functioning properly?

The tv uses all these types of security, WEP is the weakest and WPA2 is the strongest security. Each allows you to enter varying lengths of passwords, in theory the longer the password the more secure but I wouldn't always say that was true (i.e. '1W3e7' is likely to be more secure than 'password1').
I use WPA2 with an eight character password.

What password (WEP, WAP, WAP2) to choose for Airport Base Station?

Hi,
I just got an Airport Base Station and now I connect to the Internet wireless with my iMac.
However, I am getting confused how to password protect this wirelss connection so that my neighbors don't use it.
Can someone please explain in basic language, as i am not a computer-geek, how I should do this and what kind of password I should use. WEP, WAP, WAP2 - that's way to confusing for me.
Also I want to get an Apple TV later this month. I heard that the kind of security setting is important for the ATV to function without problems.

WPA2 - Absolute strongest when used with a non-dictionary password (don't use a word from the dictionary as your password). Unfortunately some older equipment may not be compatible with WPA2.
WPA - Nearly as strong as WPA2 when used with a non-dictionary password. Unfortunately some older equipment may not be compatible with WPA.
128 bit WEP - Relatively weak and only recommended if you are using equipment which is not compatible with WPA2 or WPA.
40/64 bit WEP - Extremely weak and only recommended if none of the others is compatible with your equipment.

Airport base station and connectivity problems

Hi all,
Heres what I know about my internet connectivity issues. I have a cable broadband (Motorola Surfboard) modem and I'm fine getting a connection when I am hooked directly from the modem into the back of my G4.
The wierd thing is that when I have my Airport (old school flying saucer shaped one) hooked up between my G4 and the modem I don't even get a signal on my tower any longer let alone my laptop. I have an ethernet cable running from the port on the base station with the circle of dots to my modem. I have a ethernet cable running from the ethernet looking port (arrows and dots) on the base station to the G4 tower.
What I don't get is why I wouldn't at least be still getting a signal to my tower? All of the appropriate lights on my modem are still lit up. I took it in a few days ago to an Apple store and the guy at the Genius Bar confirmed the Base Station is working fine. Why does my computer now not like being hooked up thru my base station? I've checked all of the network settings and all seems to be fine.
Any help or ideas will be appreciated. This is driving me nuts.
Thanks,
Vance

I may have misunderstood your original question. If you want to use both your older Airport as well as the newer dual band one, you certainly can, but first describe which model your older Airport is and what specifically you wish to accomplish by using both.
There's no advantage of keeping the older one in service unless one Airport base station is unable to create a wireless network with sufficient range for your needs. There are as many as three different ways of doing that depending on which older one you have: a Wireless Distribution System (WDS) which can only use 802.11b/g, an "extended" network, which can only be accomplished with an 802.11n network, or a "roaming" network in which the Airports are connected to each other using their Ethernet LAN ports. This last method is the most preferable, but obviously requires that you run a cable between them.
Use Airport Utility to configure the Extreme. Read about designing networks in the Apple AirPort Networks manual.
In any event you don't need to use both Airport base stations if all you want to do is have a wireless network that can serve both your iMac and your Powerbook. Any Airport base station Apple ever built can serve both. The newest Extreme just adds more features.

Losing connection with safari using airport base station

Airport base station. Frequently loses connection with safari, even though the station shows green. Same problem with all our devices, IMac, MacBook Pro, IPads, Iphone etc. However, disconnect not at the same time, some devices works, others don't.

Hello sjobizz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628?viewlocale=en_US
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/ht1365
Best of luck,
Mario

Imac as airport base station?

Similar Messages

Maybe you are looking for