Imac awakens from sleep for no reason?!

So sometimes in the middle of the night my imac comes on from sleep.  Usually it's very rare but it happened like 3-4 times last night.  I know the next door nieghbor has an airport extreme, I pick it up on my wifi.  Do you think someone's trying to hack in or is it coincidence? No I don't think I have a ghost either ; )
Jerilyn

This may be something like a driver, application or external device which is not fully Leopard compatible, or even a component of MacOS if you upgraded to Leopard rather than did a clean install. To start the process of troubleshooting, first download and install the full 10.5.1 update from http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1051update.html , even if you have already updated to 10.5.1 using software update. The full updater has been reported to resolve a number of minor issues.
Next, assuming that doesn't resolve it, start up your mini, put it to sleep and then disconnect everything. If it continues to wake unpredictably, the issue is with the mini itself, and you may be best to backup all your data and do an erase and install to resolve any residual issues caused in the upgrade. If, on the other hand, the system remains sleeping, it points to an external device being the culprit, in which case plug each one in, one at a time until you can create the unpredictable waking again. Whichever component was last plugged in, is the primary suspect!

Similar Messages

  • Intel Mac Mini wakes from sleep (for no reason) after installing leopard

    My mac mini keeps waking after its been put to sleep (both by selecting sleep by hitting the power button or using the apple menu item.
    This only happens now I've upgraded to leopard; with tiger, all was fine.
    Any ideas what's going on? The iChat logging in noise blasting through my speakers at 1am last night gave me a bit of a fright!

    This may be something like a driver, application or external device which is not fully Leopard compatible, or even a component of MacOS if you upgraded to Leopard rather than did a clean install. To start the process of troubleshooting, first download and install the full 10.5.1 update from http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1051update.html , even if you have already updated to 10.5.1 using software update. The full updater has been reported to resolve a number of minor issues.
    Next, assuming that doesn't resolve it, start up your mini, put it to sleep and then disconnect everything. If it continues to wake unpredictably, the issue is with the mini itself, and you may be best to backup all your data and do an erase and install to resolve any residual issues caused in the upgrade. If, on the other hand, the system remains sleeping, it points to an external device being the culprit, in which case plug each one in, one at a time until you can create the unpredictable waking again. Whichever component was last plugged in, is the primary suspect!

  • When my IMac awakes from sleep mode, the password login screen freezes and no cursor appears.

    Hello!  When my IMac awakens from sleep mode, my log in screen is frozen (I can't type anything) and there is no cursor.
    I can turn the computer off and on again and then I have an active log in screen, but if I walk away from the computer and it goes into sleep mode and i have the same problem trying to bring it back from sleep mode.
    Thoughts?

    Hey Kristogirl,
    I understand that when waking from sleep mode, your iMac freezes. Try executing these two troubleshooting steps:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    OS X Mountain Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/PH11243
    If neither of those help the issue, I would follow the steps in the next article, specifically the "If the issue occurs in various applications, or in Mac OS X" section:
    Mac OS X: How to troubleshoot a software issue
    http://support.apple.com/kb/HT1199
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • IMac wireless mouse/keyboard unavailable after awakening from sleep - OS X 10.10.3

    I am using an iMac21 inch late 2012. Has been working perfectly until I upgraded to OS X 10.10.3. Now when the iMac wakes from sleep neither the mouse or keyboard are connected. The only recourse is to force a hard restart with the power button.
    i have tried the following to no avail:
    SMC reset
    PRAM/NVRAM reset
    reboot (reconnects until computer sleeps & reawakens)
    bluetooth off/on
    repaired Bluetooth devices
    Removed & reconfigured devices
    I have set sleep (in Energy Preferences) to wait indefinitely & that has 'resolved' my issue. Albeit with an increase in energy use. Of course this isn't a fix.
    I Would be grateful if anybody had some tips on how to resolve this situation.
    thanks
    paul

    By the way, are you seeing something like this in your system logs?
    Apr 12 12:07:13 iMac kernel[0]: **** [IOBluetoothHCIController][TransferACLPacketToHW] -- commandSleep(&mSystemOnTheWayWakingUp) failed -- counter = 1 ****
    Apr 12 12:07:23 iMac kernel[0]: **** [IOBluetoothHCIController][TransferACLPacketToHW] -- commandSleep(&mSystemOnTheWayWakingUp) failed -- counter = 2 ****
    Apr 12 12:07:33 iMac kernel[0]: **** [IOBluetoothHCIController][TransferACLPacketToHW] -- commandSleep(&mSystemOnTheWayWakingUp) failed -- counter = 3 ****
    Apr 12 12:07:43 iMac kernel[0]: **** [IOBluetoothHCIController][TransferACLPacketToHW] -- commandSleep(&mSystemOnTheWayWakingUp) failed -- counter = 4 ****
    Apr 12 12:07:53 iMac kernel[0]: **** [IOBluetoothHCIController][TransferACLPacketToHW] -- commandSleep(&mSystemOnTheWayWakingUp) failed -- counter = 5 ****
    Apr 12 12:08:03 iMac kernel[0]: **** [IOBluetoothHCIController][TransferACLPacketToHW] -- commandSleep(&mSystemOnTheWayWakingUp) failed -- counter = 6 ****
    Apr 12 12:08:13 iMac kernel[0]: **** [IOBluetoothHCIController][TransferACLPacketToHW] -- commandSleep(&mSystemOnTheWayWakingUp) failed -- counter = 7 ****
    Apr 12 12:08:23 iMac kernel[0]: **** [IOBluetoothHCIController][TransferACLPacketToHW] -- commandSleep(&mSystemOnTheWayWakingUp) failed -- counter = 8 ****
    Apr 12 12:08:33 iMac kernel[0]: **** [IOBluetoothHCIController][TransferACLPacketToHW] -- commandSleep(&mSystemOnTheWayWakingUp) failed -- counter = 9 ****
    Apr 12 12:08:43 iMac kernel[0]: **** [IOBluetoothHCIController][TransferACLPacketToHW] -- commandSleep(&mSystemOnTheWayWakingUp) failed -- counter = 10 ****
    Apr 12 12:08:53 iMac kernel[0]: **** [IOBluetoothHCIController][TransferACLPacketToHW] -- commandSleep(&mSystemOnTheWayWakingUp) failed -- counter = 11 ****
    Apr 12 12:09:03 iMac kernel[0]: **** [IOBluetoothHCIController][TransferACLPacketToHW] -- commandSleep(&mSystemOnTheWayWakingUp) failed -- counter = 12 ****

  • IMac wakes from sleep odd

    I have an iMac G5 iSight, and for some reason it seems to be waking from sleep when I turn on my powered speekers connected to a different computer, or if I plug in something to the wall outlet, any idea why this is?

    It is checked to wake for ethernet network admin access, but that is it. The iMac Is plugged into a wall outlet, and I have a Power Mac G5 plugged into a power strip that is plugged into the same wall outlet. I Have also noticed that if I am walking on my carpet and I touch the Power Mac, the iMac Will turn on.

  • IMac wakes from sleep on its own with Yosemite

    After installing Yosemite, my iMac wakes from sleep all on its own multiple times throughout the day and night.  The screen does not turn on when this occurs and it goes back to sleep on its own.  I figured the my energy settings may have changed after the upgrade, but nothing is different.  I have no schedule set and the "wake for network access" is unchecked.

    To my knowledge, any Mac that is 1. connected to power and 2. not powered down will wake periodically for the reasons I explained, and perhaps for additional reasons known only to Apple. If disabling "wake for network access" does not change anything, all I can say is that it's working as Apple intends it to work. Before you ask, I strongly discourage you from finding clever system "hacks" or workarounds to prevent your Mac from working as designed.
    It may or may not be a bug. Whether it is or not though, if it bothers you, consider providing feedback to Apple.
    When questions such as yours arise, it helps to look at iOS. iPads and iPhones will all periodically connect themselves for the purposes of downloading emails, Messages, alerts etc. There is no way to disable that, other than to completely power down the device, which almost no one does. Apple has been inexorably changing OS X to effectively implement iOS design features such as this – for better or worse is not for us to say.
    May I ask why this concerns you? Perhaps that would lend some insight regarding possible solutions.

  • Folder always opens when imac wakes from sleep

    Don't think its a huge problem but when new imac wakes from sleep the same folder always pops up on screen(shaded in black). It always has to be closed before I can proceed with anything.Any suggestions would be appreciated. Also the folders name is always highlighted red. Thanks

    Searching the web for "appcode.hex" the first item that I found was for something related to an Olevia TV.
    A .exe file is a Windows file and will not run under Mac OS X.
    Installer Vise "Creates software installers for Windows or Macintosh.(MindVision Software)"

  • Macmini 2011 on lion, goes to a blue screen om monitor when awakening from sleep mode, last 3 or 4 seconds, can anyone help? Thanks

    Macmini 2011 on lion, goes to a blue screen on monitor when awakening from sleep mode, last 3 or 4 seconds, before desktop appears, can anyone help? Thanks

    Depending on the system configuration, this may not
    be unusual.  The Mini that I use for my home theater,
    which is connected to a receiver then to a TV, all via
    HDMI usually takes a couple seconds to come up just
    the way yours does.  Same happens when I switch sources
    on the receiver.  Actually, it starts with the blue screen and
    will sometimes flash before the desktop comes up.
    It seems that when HDMI goes dormant, there is handshaking
    that needs to be re-established, at least thats my SWAG on it.
    On the other hand, the Mac Mini Server that I use as a work
    station and is connected to a Thunderbolt Display, wakes to desktop
    in a second, maybe two.  On this combo, it just comes up to
    the desk top.
    It also probably depends on what processes were active when
    the Mini was put to sleep.  So it may take some time for it to get around
    to reloading the desktop.

  • How can I wake my iMac up from sleep mode? Can I do it via iPad?

    How can I wake my iMac up from sleep mode? Can I do it via iPad?
    I've set the "Wake on Demand" in the system preference, but don't know the way to wake it up.

    It wakes up automatically in response to requests for certain sharing services.
    About Wake on Demand
    Search for an OS X application called "WakeOnLAN." Search the iTunes App Store for iOS apps with "wake on LAN" in the description.

  • External hard drives ejecting after iMac wakes from sleep.

    External hard drive keeps ejecting after iMac wakes from sleep. TM does not recognise, so have to unplug then re plug in Ext HD, only then TM will perform a back up. Not seamless backups. Help to resolve would be grand

    Ive got the same problem with a Western Digital 500GB My Book Pro on my iMac Ive tried it on a few other machines and I think its happened on them, I say think because it was only when it had happened a couple of time that I started to take notice of circumstances etc and ive only had the drive a week, downloaded what may be a more uptodate "My Button manager" from the WD site still happened but Ive got this idea that it didnt happen on one machine which may not have had the MyButton thing on at that time, have you solved it yet I am using USB at the moment.
    20" iMac 2.13Ghz   Mac OS X (10.4.8)  

  • In Mountain Lion how to keep Dashboard from opening each time awakening from sleep?

    Every time awakening from sleep and/or screen saver, the dashboard screen comes up as the opening display, how can I stop this?

    Nope.
    If you launch Mail, you get mail.
    You can only stop if from loading if your DON'T launch Mail.
    You can also decide how much to have it load, and how far back.
    The other option is to turn off Wifi before you launch Mail.
    Scott

  • Networking issues following upgrade to 10.5.8 when iMac wakes from sleep

    Hello,
    I recently upgraded to 10.5.8 and I'm now experiencing issues with network connectivity following the iMac waking from sleep. I have to stop Airport and then start it again to resolve the issue.
    Can you provide any resolutions to this or advice?
    Many Thanks,
    Sam

    Reinstall the Mac OS X 10.5.8 Combo Update because the Combo seems to help a lot of people when a Delta upgrade doesn't take right.

  • Intuos4 tablet won't work when iMac wakes from sleep

    Whenever my iMac wakes from sleep my Intuos4 tablet no longer functions (I use it in place of my Magic Mouse). Has anyone had this issue?

    Viking501,
    You may want to mark this thread with a correct answer which you will find in the Legend to the right. This may help other people with a similar issue.

  • Spinning beach ball when awakening from sleep

    I get the spinning wheel when awakening from sleep. Also my fans seem to be running a lot more than they used to.  I've tried resetting SMC and PRAM.  I recently installed a Crucial 256GB M4 SSD and enabled TRIM--not sure if that had anything to do with it.  Running OS X 10.7.4 and have the latest updates. This is on an early 2011 MBP with 16GB RAM.
    Anything I should do or check?
    Thx

    Seems to be a problem with the hard drive. Ok prior to 10.5.2. Affected drive: Fujitsu MHV2100AT PL 100gb

  • IMac waking from sleep several times at night

    For some reason my iMac won't stay asleep. This is starting to bother me because my iMac is beside my bed and it wakes me up when I hear the hard drive spin back up. I counted at least 4 times last night that I heard it wake itself up (and me). I usually sleep my iMac at 10:00 pm manually. Here is log entries from console the first of 4 times it happened last night:
    May 13 22:00:29 ********-********-imac DashboardClient159: no upcoming events
    May 13 22:00:29 ********-********-imac com.apple.Dock.agent97: 2010-05-13 22:00:29.552 DashboardClient159:a03 no upcoming events
    May 13 22:00:44 ********-********-imac DashboardClient159: no upcoming events
    May 13 22:00:44 ********-********-imac com.apple.Dock.agent97: 2010-05-13 22:00:44.019 DashboardClient159:a03 no upcoming events
    May 13 22:04:26 ********-********-imac com.apple.WebKit.PluginAgent4760: Debugger() was called!
    May 13 22:06:39 ********-********-imac loginwindow41: loginwindow SleepWakeCallback WILL sleep
    May 13 22:06:40 ********-********-imac configd14: PMConnection mDNSResponder com.apple.powermanagement.applicationresponse.slowresponse 1733 ms
    May 13 23:17:37 ********-********-imac SyncServer4765: 6a209e0 |SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    May 13 23:17:37 ********-********-imac airportd4771: _fastFinderContextInit: Starting auto-join with ssid ‘******* Network'
    May 13 23:17:47 ********-********-imac loginwindow41: loginwindow SleepWakeCallback will power on, Currenttime:5/13/2010 11:17:47.354 PM - Waketime:5/13/2010 11:17:35.970 PM = Deltatime:11.384119987
    May 13 23:17:47 ********-********-imac configd14: network configuration changed.
    May 13 23:17:47 ********-********-imac configd14: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 254 ms
    May 13 23:17:47 ********-********-imac configd14: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 255 ms
    May 13 23:17:47 ********-********-imac webdavfs_agent1705: stream_transaction: CFStreamError: domain 1, error 49
    May 13 23:17:47 ********-********-imac webdavfs_agent1705: WebDAV server is no longer responding, will keep retrying...
    May 13 23:17:47 ********-********-imac webdavfs_agent1705: stream_error: Posix error 49
    May 13 23:17:47 ********-********-imac KernelEventAgent42: tid 00000000 received event(s) VQ_NOTRESP (1)
    May 13 23:17:47 ********-********-imac KernelEventAgent42: tid 00000000 type 'webdav', mounted on '/Volumes/**********-1', from 'http://fileservices.me.com/*********, not responding
    May 13 23:17:47 ********-********-imac KernelEventAgent42: tid 00000000 found 1 filesystem(s) with problem(s)
    May 13 23:17:47 ********-********-imac configd14: Sleep: Success - AC - Software Sleep
    May 13 23:17:47 ********-********-imac configd14: Wake: Success - AC - RTC
    May 13 23:17:47 ********-********-imac configd14: Hibernate Statistics
    May 13 23:17:47 ********-********-imac loginwindow41: askForPasswordBuiltIn after makekey, Currenttime:5/13/2010 11:17:47.974 PM - Waketime:5/13/2010 11:17:35.970 PM = Deltatime:12.004171014
    May 13 23:17:48 ********-********-imac configd14: network configuration changed.
    May 13 23:17:50 ********-********-imac webdavfs_agent1705: WebDAV server is now responding normally
    May 13 23:17:51 ********-********-imac KernelEventAgent42: tid 00000000 received event(s) VQ_NOTRESP (1)
    May 13 23:17:52 ********-********-imac mDNSResponder18: RegisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:0224:36FF:FEB9:DECD)
    May 13 23:17:54 ********-********-imac AOSNotification138: AOSNotification XMPP session not connected - no ping sent
    May 13 23:18:18 ********-********-imac loginwindow41: in pamsmauthenticate(): Failed to determine Kerberos principal name.
    May 13 23:18:29: --- last message repeated 1 time ---
    May 13 23:18:29 ********-********-imac loginwindow41: builtInAuthWindowDidResignKey
    May 13 23:18:29 ********-********-imac loginwindow41: handleUnlockResult, Currenttime:5/13/2010 11:18:29.695 PM - Waketime:5/13/2010 11:17:35.970 PM = Deltatime:53.724636018
    May 13 23:18:59 ********-********-imac loginwindow41: no spins reported for this wake
    May 13 23:18:59 ********-********-imac com.apple.backupd4795: Starting standard backup
    May 13 23:18:59 ********-********-imac com.apple.backupd4795: Backing up to: /Volumes/My Book/Backups.backupdb
    May 13 23:19:03 ********-********-imac com.apple.backupd4795: No pre-backup thinning needed: 2.68 GB requested (including padding), 831.59 GB available
    May 13 23:19:17 ********-********-imac com.apple.backupd4795: Copied 4032 files (19.1 MB) from volume Macintosh HD.
    May 13 23:19:18 ********-********-imac com.apple.backupd4795: No pre-backup thinning needed: 2.66 GB requested (including padding), 831.56 GB available
    May 13 23:19:23 ********-********-imac com.apple.backupd4795: Copied 2597 files (94 KB) from volume Macintosh HD.
    May 13 23:19:28 ********-********-imac com.apple.backupd4795: Starting post-backup thinning
    May 13 23:19:37 ********-********-imac com.apple.backupd4795: Deleted backup /Volumes/My Book/Backups.backupdb/******** ******** iMac/2010-05-12-222335: 831.57 GB now available
    <Personal Information Removed by Host>

    I've sent a request to the Hosts. We will just have to wait and see if they delete it.
    Cheers,
    GB

Maybe you are looking for

  • What do I need to install to run Java?

    Please can anyone help. I need Java to enable me to learn programming at college. The thing is that my notes tell me that I need the JDK so that I can run stuff through a Tomcat Server. Anyway, I am getting in a right muddle. There doesnt seem to be

  • Hyperlinks in PDF is not opening New window.

    Here I want to share my experience with PDF .I am using SSRS reports and I have a column called "Location" in SSRS Report. "Location" column contains a hyperlink and that uses javascript code.Below is the javascript code for that column "Location" ="

  • Flash recovery area, need help!

    Hi! I have some problems with Flash Recovery Area. I use Oracle 10g. So, 1) I tried to change Flash Recovery Area Size from 10 to 15 GB in Enterprise Manager, see: http://my.jetscreenshot.com/2677/20111129-mxmb-117kb Applied changes and shutdown DB.

  • I have downloaded pages onto my mac but an not able to find it?

    I have downloaded pages from the App Store onto my Apple Mac and I am not able to find it on my laptop. I have tried using finder and that doesn't but when I go on apple store it has downloaded.

  • Validating a sender file using a JAVA UDF in PI message mapping

    Hi, I have a sender file with one header and multiple detail lines. I have been asked to read a tag on the header which contains the total number of detail lines. I then loop round the detail lines counting the total number. If the total number of de