Imac bluetooth will not see my samsung smartphone

i have a samsung smartphone but bluetooth will not connect to my imac any sujestions

Thank you. That's what I thought will need to happen.
One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know?  It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
Just trying to put a band-aid on it for another couple weeks.

Similar Messages

  • My bluetooth keyboard (Macnus 3.0) is recognised by my iMac but will  not pair?  I have paired it with my iPad using code 8310 but it still will not pair with my iMac.  Can someone help please?

    My bluetooth keyboard (Macnus brand - bought recently in Thailand)(similar to Mac small keyboard) will pair with my iPad using code 8310,and is recognized by my iMac but will not pair?
    There are very scant instructions with the keyboard and no mention of any code (the code was prompted by my iPad).
    I have followed the instructions but it still will not pair with my iMac!
    Can anyone help please?
    My iMac is 20 inch  Mid 2007 OSX10.9.1 4GB RAM

    Hi All, thank you for you suggestions.  I have been unable to find any website for the maker, but have looked at several Thai/cambodian sites incl <http://www.buycoms.com/Article/8435/index.asp>  which mentions the keyboard being suitable for tablet or windows.  No mention of iMac!  although the box is branded to indicate Mac compatable.
    I'm thinking that maybe it just will not pair with an iMac.
    Ill keep looking for the maker website, which might come on later in the future? maybe?
    thanks again.

  • I have an iMac running Mavericks 10.9.4 I also have about 30 Kodack photo CDs that I wish to convert from PCD to Jpeg but Mavericks will not see the files, they are grey.  Is there any way to convert them?

    I have an iMac running Mavericks 10.9.4 I also have about 30 Kodack photo CDs that I wish to convert from PCD to Jpeg but Mavericks will not see the files, they are grey.  Is there any way to convert them or must I do it on another machine?
    Kaibil

    iPhoto used to support the PCD format up to a few years ago. It's extremely frustrating that Apple decided to no longer support this format and now I'm directed to pay nearly $40 for an app that will (GraphicConverter 9). Did Lemke Software make a deal with Apple so we'd have to pay a premium for a very overpriced converter? And, how are decisions like this supposed to encourage the use of iPhoto?
    Apple users already pay a premium to use a Mac. Obstacles like these eventually destroy loyalty to the Apple brand. Just ask Microsoft how their back room deals that exploited their customer base worked out for them.

  • My imac slot will not load a cd or dvd

    My imac slot will not load a cd or dvd

    CD/DVD Loading Problems                        
    CD/DVD Drive - Troubleshooting See troubleshooting section.
    CD/DVD Drive - Troubleshooting (2)

  • My bluetooth will not turn on, I may have accidentally deleted something while using "clean master"? is there a way to recover or reload without doing a factory reset? Thanks.Android 4.2.2  Jelly bean

    thanks
    Locked - please see duplicate discussion:
    My bluetooth will not turn on, I may have accidentally deleted something while using "clean master"? is there a way to r…
    Message was edited by: Admin Moderator

        Sorry to hear that the Bluetooth data/profiles may have been deleted from your phone. Accidents happen!
    oznaw, to be honest, I believe you will need to perform a master reset in order to recover the missing Bluetooth data, as there is nothing really available in the Play Store that just updates the Bluetooth profiles/data. Let us know if you have any additional questions, or if you found an alternative. Thank you oznaw.
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • Bluetooth will not enable(6230i)

    Hello
    I have a new 6230i and when I go to the Bluetooth menu and select
    Bluetooth->On
    it goes back to the Bluetooth menu with bluetooth set to 'Off'.
    If I turn off the phone and turn back on and try it again, Bluetooth->On, I get the message:
    "Switching on Bluetooth"
    but it goes back to the Bluetooth menu with bluetooth set to 'Off'.
    I have tried the same with a 6230 and Bluetooth switches on everytime.
    Does it sound like my new 6230i is broke? Any ideas?
    Are there any firmware upgrades which could fix this?

    No didnt drop the phone but if it was damaged by a drop i would have expected something else to be damaged. I have used the USB cable, IrDA, camera and normal phone operation and they seem to be ok, just the bluetooth will not enable. This leads me to think it is a problem from the factory.
    First thing i tried was taking out the battery as you suggested. I will return to the store and see what they think but is there a Nokia tech support?

  • Imac i5 will not power on

    My intel based iMac i5 will not power on today.
    It worked fine last night.
    I tried to turn it on and I got the chime but nothing else. No sounds or display.
    I attempted to reset smc with no resolve.
    At one point after resetting I did get the fan to come on. The fan would run continually until hitting power botton.
    Now I hit power button and Nothing.
    I have had this unit since last December with no issues.
    Any Help would be appreciated.

    You could try a PRAM reset:
    Reset PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P and R.
    You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    If that doesn't help, try a 'safe boot' - restart holding down the shift key until you see the progress bar. If it boots, restart normally from the Apple menu.

  • Can i install windows 7 via bootcamp (MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air. In bootcamp i allocate the partition then i click install and bootcamp will not see the disk.

    Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?

    I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?

  • I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an antennae?

    I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an additional antennae?   If so, which one because my research is confusing me about what is supposed to work with this computer.

    Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

  • TS2972 I have 4 Apple TV's. All set up to Home share. One will not see the computer. It is also the only 720 I have. The other three are 1080's. How do I get the 4th one (the720) to recognize my Mac?

    I have 4 Apple TV's. All set up to Home share. One will not see the computer. It is also the only 720 I have. The other three are 1080's. How do I get the 4th one (the720) to recognize my Mac?

    Need more information to help you, but I am providing some suggestions.  Sorry if you are past these type of basic things.  But didnt really have much to start with and understand your technical level to start with. 
    Have you got into Settings > Computers > Turned on Home Sharing (Note: You must use the some Apple ID used by the iTunes library on your MAC for them to see one another)
    How is your MAC connected to the network vs the 720 ATV2?  Is one WiFi and the other Ethernet?  Have you tried switching the ATV2 to WiFi if Ethernet? 
    Has the MAC been restarted since this started happening?  Same with your Router and any other networking device being used?  Sometimes an IP conflict can arise in your networking and most consumer networking equipment does not know how to "self heal" without a reboot. 
    Make sure you have given those things a whirl and share back your results.  Any other information you can provide, such as how you connect to your network from each ATV and MAC. 

  • Imac OS10 will not update photoshop CS2

    How to update photoshop CS2 / iMac  OS10 will not support

    Exactly what version of Mac OS 10 do you have?
    And, if Photoshop is not supported, you will need to update/upgrade/pay for a new version of Photoshop. CS2 has not been supported since Snow leopard I believe (10.6):
    http://roaringapps.com/apps?index=a

  • Macbook will not see wireless network

    My new Macbook will not see my wireless network. My Windows 2000 PC, my Ipod touch and my Macbook Pro (jaguar) all see it no problem and work well with it.
    I have tried entering the network name manually and it does not work. I have WEP password protection.
    The macbook sees and connects to all other wireless networks I've encountered (father-in-law's house, Airport departure lounges, hotspots etc.). The macbook also sees my neighbours networks no problem.
    I am confused, please help.

    I am having the same issue, a friend visited with his new Mac Mini, running Leopard, and it would not see the wireless network, that 3 other macs (PowerBook G4, iBooks G4 and G3) running Tiger (10.4.11) and Windows machines recognize without problem.
    I'm wondering if the issue is Leopard and 3rd party routers or MY router in particular, as I have a US Robotics 5461, and I remember when a previous roommate replaced her G4 iBook, running Tiger, with a MacBook Intel running Leopard, she also had issues connecting wirelessly.
    My friend's Mini had no problem recognizing all the neighbors networks (at least 4 or 5) and I'm pretty sure they are not Mac users with an Airport Base Station.
    I was hoping to upgrade my G4 PowerBook (once I get it repaired) to Leopard in the future, but I don't want to lose the ability to connect to my wireless network.
    Has anyone running Leopard run into this problem and found a solution?

  • PS CS5.1 [was: 5.5] will not see my Canon 550d cr 2 files

    I am running a mac on os x and Photoshop 5.1 . I just purchased a canon rebel 550d (T5i I think) It will not see any of the images. This must be an Adobe issue as the MAc finder and preview sees the images.
    SO I have downloaded and tried to install various camera raw updates. 5.1 5.7 6.1 6.4 7.1 7,3 nothing seems to work indeed one of them failed to open. ver 6.1 will not open as an error code comes up. this error code relates to not being elligable for the version, yet it says cs 5. cs 5.5 and 6 are worthy.
    CAn someone help please.
    regards Paul
    Message was edited by: Paul the Artist

    Paul the Artist wrote:
    I am running a mac on os x and Photoshop 5.5 .
    Do you mean Photoshop 5.5 (shipped in 1999) or Photoshop CS5 (shipped in 2010)?
    If 5.5 (1999), then it's unlikely to ever read Raw files.
    If you mean CS5 then try Help > Updates to update your Camera Raw to version 6.7.
    Direct link for Camera Raw 6.7 for Mac
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5370
    The 550D has been fully supported since Raw 6.1
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

  • G5 Dual 2.0 will not see sata dirve, but boots to ide on the cdrom cable

    I have a G5 dual 2.0 and it will not see the sata drive. I have a 320 wd and a 80 wd.
    At one point last night I was able to partition the hd using firewire and a mac mini. But no longer can see the drive.
    I pulled the drive from my g4 with panter and plugged it into the cdrom cable and it boots fine.
    How do I get the sata back working?
    In info, it show the ide and then says k2 sata root twice below that.
    I am running 512 pc3200 ram
    Any help appreciated

    Hi, This is a power mac mini 1.42 with tiger
    I tried with my macbook and it would not see it, and the macbook was asking to do some crazy thing to be able to use it as storage, just left macbook alone.
    When I formated I zero'd all data, then just used whatever was default.
    Messing around now, I can see the 80 gig. Panther just installed with much difficulty LOL, so my machine is fine, just need to figure out the drive now
    The 320, I will put in a HP machine and use gparted again. Should I leave it unformatted or try a different file system? I think when I wiped the windows from it I left it unformatted the first time.
    After I did partition, I made 3 partitions on the 320 and drug my os9 folder onto the second partition, Maybe that did it. This is the first I am really messing around with a g5, so much to learn.
    I think zapping pram frequently is what is working so far. Going after the 320 now

  • I need a new graphics card for my iMac Apple will not sell me one so I can repair it myself, help

    my graphics card as gone on my iMac Apple will not sell me one so that I can repair it myself, any suggestions

    not sure which iMac you have but since the old 24" model the video card is not a separate board but a part of the main board so to fix it you would have to buy a smd gpu chip and solder the smd legs manually few people can manage such  feat the only leg compatible gpu chips would work of cause in which case it would be more of a nvidia or amd having to sell you the gpu chip then apple as apple don't make gpu chips

Maybe you are looking for

  • Is Handoff and not available for iPad.  feature is NOT showing in settings

    Downloaded iOS 8 on my iPad 3 and iPhone 5s. The Handoff feature is present (under Settings=General) on the 5s and enabled.  The iPad doesn't even display the feature, as if it's not there or even available at all.  Anyone else having this issue?  I'

  • 3D efect problem

    Hello. I'm new here and just start my adventure with as3. I have a problem with a 3D effect during play a rotation of the cube. I made a cube with sample textures and texture of the walls while playing "overlap" each other. Source code: function rota

  • Query to get the difference between 2 totals from 2 different queries

    I wanted to know if it is possible to get the difference between 2 totals from 2 different queries. I would explain with an example: 1st query  - Select sum(homepass) from table 1 2nd query – select sum(homepass) from table2 Is it possible to display

  • UCCX Agent Whisper in the Script

    Hello, We want to have a whipser option for a agent so they can know if the calls are coming from English or French queues. Is it possible to configure this in the script for english or french queue? I was trying to add the prompt in the attached scr

  • How to control File Download window

    I am using javax.servlet.ServletOutputStream for downloading the files. I am reading the InputStream from data base and writing into the ServletOutputStream object. I set the HttpServletResponse content type to "application/octet-stream". When I trie