IMac "buzzes" at startup
Hi guys,
Lately, when booting my iMac, it makes this relatively loud buzzing sound for a few minutes. I figured it must've been one of the fans that does it becaus eof dust or whatnot inside the machine, but when coparing the fan speeds in iStat Pro while buzzing and when the buzzing stopped, there's no difference. All 3 fans keep stable at 1200rpm, 1200rpm and 1000rpm respectively, and once the buzzing has stopped the iMac is whisper quiet as usual.
It is correct that my iMac has 3 fans right? Or has one fan gone rogue perhaps, and is it not listed in iStat anymore. The fans areCPU, HD and Optical Drive.
This isn't worrysome enough to warrant a repair but I'm still wondering what might be going on here.
Many thanks in advance.
I think you are correct the issue probably is one of your fans and yes there are 3 fans. There isn't a great deal you can do except ensure the intake and exhaust areas of your iMac are kept clean, however once the damage is done that is moot. If your iMac is covered by warranty or AppleCare I would recommend contacting Apple to get it fixed however that of course is your decision.
Not that this is of any help I had a similar issue when my machine was less than 14 days old in October 2007, after contacting Apple they exchanged the machine and since then I haven't had any problems at all. In my case it was noisy on start up however after 3-4 minutes the noise went away. One thing you can do is leave your machine on 24/7 as many of us do, the amount of energy being used is extremely small.
Similar Messages
-
My Magic Mouse (wireless) paired with my 2010 iMac: Often at startup the cursur just sits in top left corner of screen, frozen. Not a battery problem. New. I take batteries out, reboot (a real pain)... then ok. HELP!
Hello:
Try resetting the PRAM and SMC.
Barry -
My imac won't startup only apple on gray screen and spinning gear. what can I do to make it work. I was using techtool to optimize and on restart it showed up with a can't find finder, it seemed to be stuck in operating system 9.0. I normally start up in 10.
hi there--
the first thing you should do for this problem is to boot holding the x. this will sometimes force a startup of os x. you can also try startup manager holding the option key. next try booting to the install disk of whatever operating system is installed on your computer (by holding the c key until you see a spinning cog under the apple) and then repair the disk with disk utility. this article gives directions for that http://docs.info.apple.com/article.html?artnum=106214. if you can't boot to the disk try the fsck outlined in this article. make sure you select macintosh hd for the repair and that you can after a few attempts reach a point where disk utility says no repairs are necessary. after that you may be able to boot up okay. if you can't, attempt a safe boot by holding the shift key until the spinning cog appears again. if you can boot up in safe mode then remove items in /library/startup items and in login items in accounts in the system preferences (but they are called "startup items" prior to tiger). also, i would remove the fonts folder from the home library and then try a regular boot from there. should keep you busy for awhile. i hope one of these things solves your problem. [ 8 ) ]
just an added note-- if disk utility cannot repair the disk then back up info ( you may want to try firewire transfer http://docs.info.apple.com/article.html?artnum=58583) then you can try a 3rd party utility like diskwarrior or techtool pro. if those cannot fix the problem, the you will have to erase and install your operating system. before this though, check the smart status of your drive in disk utility. you can do this by selecting the first icon above macintosh hd with the alphnumeric code and manufacturer name attached to it. if it is still okay, smart status should say verified. sometimes smart status is not available. it depends on the drive. -
IMac won't startup after restore from time machine
After I restore my backup from time machine ( twice ) mi iMac halt at startup and won't startup. It stuck at the apple logo forever. I also restarted holding down command R safe mode and install OS X and it will startup okay but can't see my buck up files and applications here. Then I restore from time machine again using an earlier backup and it won't startup again. Please any help I will appreciate.
There could be a few reasons for this.
First what version of OS X do you have installed?
What version of OS X is the Time Machine Backup file from?
Did Reinstalling OS X from Recovery install the same version you had before reinstalling?
If you have not changed OS X versions then:
It sounds like there may be a bad file in the backup that is causing the computer to not startup after restoring it. This is especailly true if the computer boots just fine after a fresh installation of OS X, but without the Migrated Data being restored.
If that is the case, then the solution is not a quick one. You have to hunt down the bad file.
Moving Files Manually (Not in Migration Assistant)
Manually access your Time Machine backup folder from within Finder (you should see the backup drive in a Finder Window or on your Desktop). Once open, manually move data from the User folder (documents, music, movies, photos etc.) into their respective folders on the Mac. Reboot after each folder you move to see which folder contains the corrupted file then delete the affected folder/file after reinstalling OS X from Recovery.
If none of the files cause the computer to hang at startup after moving all your User data, then the issue is from within the System or Library folders.
NOTE: DO NOT manually move Applications, System, or System Library files over to the Mac. You can cause major issues with the current installation by doing so. It is safer to just reinstall all the Apps from wherever you got them so they can recreate their support files and such themselves.
2- Using Migration Assistant
Basically, if you have discovered the affected file. You can just simply delete it from the backup folder.
Reinstall OS X after you have done that, and use Migration Assistant to automatically migrate the data over minus the affected file/folder.
Its a pain in the rear, but it will at least let you salvage most of your data.
Let me know what happens riorec!
- Captain -
My imac won't startup past the spinning gear and my apple keyboard is wireless but it won't connect, how do I fix the problem so I can get into safe mode?
Can anybody help me on this issue? I have already tried to replace the batteries but since the computer won't get past the spinning wheel of death then the keyboard won't connect.Please follow Apple's advice in http://support.apple.com/kb/TS2570. If you need to get your hands on a wired USB keyboard, even a PC one will work fine.
Do not follow the previous poster's advice, that option is a "last chance" option. OS X is stable and in most cases a reinstall is never needed. Follow the directions in Apple's letter. -
Imac freezes during startup stops @ blue screen & have tried everything
My imac freezes during startup, it gets to blue screen and just sits. I have tried to boot from the Leopard 10.5 install disk, and just sits, can't get to log in screen. Have run the disk utility and it says disk appears to be ok, Won't startup up in safe boot, blue screen just sit. Have tried 'fsck' fix, just sits at blue screen. Have reset PRAM, I don't know want else to try. Disk utility & "fsck" says 'disk appears to be ok'. When exiting fsck, it will start the process then stops. Does anyone have any suggestions, I have not tried to reinstall 10.5 yet.
Thanks in advance
PaulaAfter reading resolutions TS1541 & other threads, I decided to try to archive & reinstall 10.5 from install disc. Well that made things worse, sometime during reinstall, system locked up, I looked at the log during install & it had been locked up about 3 hours and now I have nothing. no systems files, using Target( firewire cable) disc with my macbook, I can see I have previous system folder & a folder that say system. but Install disc does not see OS.
Do I need to take it to an apple store for repair or what. It's only 3 years old.
please help
Paula -
My iMac locked up when waking from sleep, so I restarted it. I got a strange multiple note beep that repeated three times. It began to startup and then I got the folder with a flashing ?. I booted from the OSX disk and used disk utility, but my hard drive doesn't show up. Is my drive dead or is there something else I can try?
iMac G5 20" screen Mac OS X (10.4.8)I am having a similar issue with my parrent's iMac G5, however, instead of 3 chimes, im getting 3 strong buzzing sounds.
I also assumed it was the drive, and in fact after starting up from the 10.4 installation DVD, Disk Utility would not list the drive as a volume. I replaced the drive with another SATA drive, and still Disk Utility shows now drive available other than the DVD drive.
Ive never heard these buzzing sounds before. I was told that for several weeks before the startup problem occured, the fans were constantly running at full speed.
Im going to try to reset the SMU and OF today and see if that helps. Unfortunately, AppleCare was not purchased, so it is out of warranty. Any info would be greatly appreciated. -
IMac freeze after startup, works fine in safe mode
Hello, my Mid 2010 iMac is freezing about 3 minutes after startup. Ive tried booting from the instal disk and repairing it but it didnt work. In safe mode it works completely fine. It similar to some other peoples problem but i was hoping someone could help me, my applecare literally just ran out like 3 weeks ago.
Hi baltwo,
Im sorry but Im new to the community and I don't know how to address users directly. Hence intruding.
It would be kind of you to shed some light on the matter.
I'm running lion 10.7.5 and followed similar procedures but mail downloads every mail again after cataloging and indexing my earlier(snow leopard 10.6.5) mail. More details at https://discussions.apple.com/thread/5373643
It would be great to find a solution as I'm struggling since two weeks.
Thanks,
Abu Suda -
Imac freezing on startup, fine in safe mode
Hi there - apologies in advance if I just need to be directed to another thread I've had a look around and can't find what to do now that I'm in safe mode.
My Imac keeps freezing either at the password screen or as soon as I've logged in.
Am I right in thinking that, given that safemode is working without problem, the issue is probably software?
One other thing that might be relevant, I am currently trying to do a time machine backup but it has been stuck on Preparing Backup for about 15 mins now.
I need advice on how I isolate the issue.
Many thanks.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
IMac hangs at startup - DU says "Volume can't be repaired"
Came back from holiday to find my 18month old work iMac wont boot up.
Opened Disc Utility in safe mode and says "Can't be repaired" and i can't get into the hdd
http://i160.photobucket.com/albums/t190/yorkshirezen/B20CEAD0-77C2-4DFD-9600-282 6839EC450-6981-000004FDDAA4C24A.jpg
Works network won't accept Time Machine so I never got round to getting an external drive and setting it up. (Yeah - I know)
As a last resort, got a 2tb drive and am trying to create a new disc image. Been "reading whole disc" for 3 hours, not even a quarter of the way through.
REALLY not wanting to have to reinstall adobe again and get all by browsers back to how I like them.
IT seemed to suspect a software update issue - one of their macbooks failed exactly the same way last week. But can't find any chatter about it.
Any ideas?pressing "c" before you hit the power button?
The C key will do nothing unless you have bootable media inserted:
http://support.apple.com/kb/HT1533
And:
For the best experience with startup keys, press the keys immediately after the startup tone plays.
If not using bootable media, for Lion or ML, boot holding Command + R or Command+Option+R.
For the OP:
I agree with RRFS - give Disk Warrior a try. -
My Imac has the dreaded blue screen on start up. To avoid this, I unplug the machine each night which solves the problem. I have contacted an Apple service rep who says I need to replace the hard drive. Nothing I have read indicates this. I have not added new hardware, not changed anything. Could it be my hard drive is bad?
ThanksYou could try a few things (if you haven't already) before giving up on the HD. You could try a Safe Boot:
Restart holding down the shift key until you see the grey progress bar. When the Mac has finished booting, restart as normal from the Apple menu.
Boot from your install disk and verify/repair the disk using Disk Utility (let us know if you're unsure how to do this).
Try an SMC reset and a PRAM reset:
SMC Reset
Shut down the computer.
Unplug the computer's power cord and disconnect attached devices.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Try these things one at a time, and test the machine after each step. -
I've been using Macs for roughly 10 years now but just recently bought my own. I purchased a 24" iMac and had no problems. I always put the computer to "sleep" when I know I won't be using it for a while. Now every, 5 minutes (give or take) I hear a loud buzzing sound that lasts for about 1-2 seconds. I never noticed this until after I installed Snow Leopard. Does anyone know what this is? It's driving me nuts and I've tried to wait and listen for it but I've realized it only happens during the computer's sleep mode. Any thoughts/ideas? Its not doing anything else abnormal but the sound doesn't seem right to me.
Hi
If you have Disk Warrior, then use it to check the state of the HD directory. Directory errors can trigger oddities in the system. If you don't have it, open Disk Utility in your Utilities folder and "verify disk", seeing if any errors appear. DU is nowhere as advanced as DW; hence, errors may be present beyond the capacity of DU to detect or repair them.
If errors do appear via DU, start-up your computer from your Installer DVD. When fully booted, go to the Utilities menu, select Disk Utility and "repair disk". Rerun until you get a clean pass. Then restart the computer and try the sleep mode again.
Genius Bar visit either will lead to an Archive and Install of the OS, or perhaps a hardware repair (I think A & I).
Regardless, post back when you learn something more definitive. -
IMac won't startup - freezes on either white screen or Apple symbol
Got my 24" 2.4GHz iMac on release last year, with Tiger. Installed Leopard on it on release day.
The problem I have is that ever since a botched Boot Camp installation I've had endless problems with certain applications hanging during their startup (notably Image Capture) or refusing to quit (notably iTunes). Force Quit doesn't resolve these issues. Restarting doesn't work because Force Quit can't quit them so I have to pull the plug or otherwise force a shutdown.
Upon restarting I either get the grey screen that instantly appears, or, if I've pulled the plug and left it for a few minutes I can get to the Apple symbol but no spinner or any further start up action. Occasionally I get lucky, get back up and running, and all is well until the next crash.
All this started happening when I decided to try installing Windows on Boot Camp again. I've had it on here a couple of times since Leopard was released but usually end up deleting it eventually because either the Windows installation gets bogged down or I get bored with it and never use it. Anyway, this time, using the same discs I've always used (and yes, it's SP2, so it should be fine and anyway it's worked at least twice before) when I got to the 'restart to continue installing Windows' bit, I got the white screen and nothing happened. After an hour or so of praying and restarting endlessly trying to get a response, I finally got it to recognise my OSX installation and was up and running again. The Boot Camp volume didn't appear to be there and Disk Utility revealed zero problems whatsoever. Everything looked fine until these recurring hangs, refusals to quit apps and screwed up start-ups.
Any ideas? I don't have the expensive Apple support, but it's less than a year old! Of course, I realise that this means nothing to Apple, who seem to think I should pay a premium in order to have my machine warrantied by them for more than 90 days. Grr...
If I get it up and running I'm thinking I should just wipe the ENTIRE system absolutely clean and re-install Leopard and then use my Time Machine backup to put all my data back on (pricelessly valuable as I use the machine to work on my photography with), but I'm concerned that if there's a flaw in the System somewhere, a corruption, that installing the Time Machine backup will just reintroduce the error. On the other hand, if it's a deeply embedded and invisinle partition corruption from the bad Boot Camp installation attempt, that should be fixed by wiping the entire drive to reinstall Leopard, right?
Any ideas? I'm absolutely sick to the back teeth of this now.
Many thanks,
OwenBut service support means dragging my iMac down to an Apple Store after making an appointment that's no doubt a couple of days away. Taking a 24" iMac on public transport in London isn't something I particularly want to do.
It did actually start up eventually. I left it sitting on the Apple logo and after a few minutes it restarted itself and all was fine, until a couple of days later when two apps failed to quit, and force quit wouldn't do anything. Neither would Terminal, or Activity Monitor (it was BBEdit and Photo Mechanic this time).
I was forced to pull the plug and since then nothing whatsoever will get it past the Apple logo. Tried popping the original Tiger DVD in and running the hardware diagnostic and it says everything is fine, but trying to restart from the Tiger DVD, or the Leopard DVD, or any other DVD that's bootable, or the hard drive, or an external hard drive - all of them result in hanging at the Apple screen. Tried safe mode, tried holding Alt to choose a startup drive, everything.
What the heck do I do now?! -
New iMac freezing on startup after NTFS install
I have a new iMac with OS 10.7.4 that freezes for 5 minutes upon startup, then starts working normally. During this time there is no response to the keyboard or the mouse. Force Quit has no effect. I have it set to start without a password so it goes straight to the desktop. This behavior started when I installed a Paragon NTFS interpreter from my Seagate external hard drive. This is done during the setup install from the hard drive to allow both Mac and Windows to use the drive. I have tried this three times, reinstalling the OS each time to get the Mac working again. The drive came with a USB 3 base which is bad news for an iMac. Seagate sent me a firewire base and I hoped that would solve the problem, but no luck. The NTFS interpreter has been uninstalled and the Seagate external drive reformatted as a Mac drive. Everything now works, but the freezing behavior still persists, and I suspect that some startup files for the Mac are corrupted by the NTFS software. I ran the bootlog in the Console for one of the startups with freezing. The following is the only thing I see that seems unusual:
12-08-15 11:34:08.464 AM applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.iCalPush': unknown error code
12-08-15 11:34:08.464 AM applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.safaridavclient.push': unknown error code
12-08-15 11:34:08.465 AM applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.AddressBook.PushNotification': unknown error code
12-08-15 11:34:08.465 AM applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.syncdefaultsd.push': unknown error code
12-08-15 11:34:08.606 AM com.apple.launchd.peruser.501: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
12-08-15 11:34:08.608 AM com.apple.launchctl.Aqua: load: option requires an argument -- D
12-08-15 11:34:08.608 AM com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
12-08-15 11:34:08.817 AM com.apple.launchd.peruser.501: (com.apple.launchctl.Aqua[134]) Exited with code: 1
12-08-15 11:34:08.825 AM UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 17691
12-08-15 11:34:09.685 AM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
12-08-15 11:34:09.686 AM com.apple.dock.extra: 2012-08-15 11:34:09.684 com.apple.dock.extra[155:1707] Could not connect the action buttonPressed: to target of class NSApplication
12-08-15 11:34:09.686 AM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
12-08-15 11:34:09.686 AM com.apple.dock.extra: 2012-08-15 11:34:09.685 com.apple.dock.extra[155:1707] Could not connect the action buttonPressed: to target of class NSApplication
12-08-15 11:34:09.686 AM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
12-08-15 11:34:09.686 AM com.apple.dock.extra: 2012-08-15 11:34:09.685 com.apple.dock.extra[155:1707] Could not connect the action buttonPressed: to target of class NSApplication
12-08-15 11:34:09.687 AM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
12-08-15 11:34:09.687 AM com.apple.dock.extra: 2012-08-15 11:34:09.686 com.apple.dock.extra[155:1707] Could not connect the action buttonPressed: to target of class NSApplication
12-08-15 11:34:10.129 AM com.apple.launchd.peruser.501:SharedServices[168]) Exited with code: 1
12-08-15 11:34:22.000 AM kernel: IOHIDSystem: postEvent LLEventQueue overflow.
12-08-15 11:34:28.550 AM com.apple.launchd: (com.apple.coreservices.appleid.authentication[128]) Exit timeout elapsed (20 seconds). Killing
I can post the entire bootlog if necessary, it isn't all that long. Any experience with this problem? The Seagate people provided good phone support but they haven't heard of this problem before.Here are the specs for your HP Pavilion p6720f Desktop Computer. According to the specs your system came with integrated graphics using ATI HD Radeon 4200 and a 250 watt power supply. You indicate that your computer now has an ATI Radeon™ HD 5670 Graphics card installed and you are having issues. According to AMD the reference ATI HD 5670 graphics card requires a minimum of a 400 watt power supply. If this is a retail card, you will need to upgrade your power supply to accomodate this graphics card. The Corsair CX500 and CX600 power supplies are good choices and are known to fit many HP cases.
Please provide the make (not AMD or ATI, but Asus, EVGA, etc.) and full model number (not 5670, but HD-567X-ZNF3, etc.) of the graphics card in question for more assistance.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
I have a 27" 2012 iMac running Mavericks that is incredibly slow to boot.
Once I've logged in it's a good 3 or 4 minutes before it's settled down and ready to use. The only apps I load are Mail and Skype on startup.
Is this normal? My 2011 MB Air is putting my desktop to shame.
I upgraded my RAM to 16GB a while back and I'm concerned this could be the reason it's so slow to boot; bad memory. Is this a possibility?
I regret not opting for the SSD at the time of purchase. Do Apple have an upgrade option?No upgrade option, but 3 or 4 minutes is unusually long. See this tip:
https://discussions.apple.com/docs/DOC-6921
Also backup your data, and verify your Mac is not under the exchange/repair program stated here:
http://www.apple.com/support/exchange_repair/
Maybe you are looking for
-
Field KNVV-CHSPL does not exist in field status tables (TMOD*)
Hi Gurus, Wile creating Customer master record at Tc= XD01 the following error coming as "Field KNVV-CHSPL does not exist in field status tables (TMOD*)" Plz help me its urgent. Vinay
-
Where is SDN search in ABAP forum?
I could not find search in ABAP sdn forum. Thanks a®
-
Hi, my iPhone was stolen two weeks ago, and I called ATT to suspend the service. Today, we were about to find it using my iPod, and it is now under a different name. What should I do? Should I report to police? I did called ATT again, and they to
-
Adobe 10.1.2 crashes when attempting to print.
Still expericing problem with printing in citrix enviroment running xenapp 4.5 on windows 2003 64 bit. Workaround to disable protection mode worked for a few day and they stopped also the shared printer name fix does not apply since the printer are a
-
Hopefully some can help me out here. I've got a HDR rendered file, saved as PSD and tiff. No matter what file i choose, if i click File -> Print, nothing happens. I can see the cursor go arround for 2 sec as if it's buisy, then nothing. No screen whe