Imac came back from repair with a scratch on the front !!!!!!

Hi all,
Hopefully someone can help me ? I got my imac 27" mid 2010 back from the genius bar in solihull uk last week and ive noticed quite a deep scratch on the front aluminum part does any one have any advice on what to do now as its been over a week im really worried as it ruins the look of my machine. Any help and advice would be greatly recieved and appreciated.
Regards
Jason Bayliss
P.s i love my imac and quite upset that this could happen !

Hi MichelPM,
I have only just found it about 30 mins ago, hopefully apple will be able to help. thank you for your input it is much appreciated.
Regards.

Similar Messages

  • IMac came back from repair with a loose hinge..

    So my iMac had some fan problems, went away for repair under AppleCare, and came back fully working with a logic board replacement. Excellent, no problems. However, the hinge seems much looser than it was when I left, such that a bang or knock on my desk causes it to begin to droop downwards. It means I need to re-situate it somewhere between 5 and 10 times a day, and presumably it'll only get worse.
    Can I tighten the hinge myself? I'd REALLY rather not lose the thing for another two weeks while they get a screwdriver in there. Is this something I can fix?
    Thanks!

    They collected it from me the first time, and it wasn't a separate courier or anything. I called the people who repaired it and the engineer is going to return my call, but it seems like something I should be able to do myself. How do you get the stand off? Presumably it's doable, to add the VESA mount?

  • Help: 5800 came back from repair with **bleep** th...

    Hello everybody,
    I had to send my 5800 in for repair (gap at the top right corner) and after it came back I had a different theme installed on the phone. I have the blue version of the phone with the theme also containing blue elements.
    Now after repair they must have done something to my firmware: the standard "sound waves" theme now does not have blue elemens any more - they are more greyish which looks horrible.
    No what I did:
    - updated the phone to v30 -> did not help
    - did a hard reset -> did not help
    "Sound waves" is the only theme installed and I cannot select the theme color anywhere (my background also has grey waves instead of blue ones). Do I have to send in the phone again?
    Thanks for your answers.
    Solved!
    Go to Solution.

    OK, thanks for that.
    That will be the 4th time I have to go to the NSC
    I'll talk to my dealer tomorrow and see if I can get the money back, because I had the phone send in 3 times because of this gap problem and after each "repair" the problem got worse.
    I am very unhappy with this phone: bad homescreen (even with V30) and the gap at the upper right corner.

  • HT1338 iPhoto won't open. I have OS X maverick on my Mac & iPhoto version 9.5.1. Mac came back from repairs & now I can't open iPhoto

    My mac was recently repaired as it wouldn't start properly.  got it back & now iPhoto won't open stating that it can't work with this version of OS X.  I have OS X 10.9.4 & iPhoto 9.5.1 which worked before & haven't been changed.

    It should work...
    See if you can rebuild the iPhoto library >  iPhoto 6 and later: Rebuilding the iPhoto library
    If not, try re downloading iPhoto from the App Store. No extra charge.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • X220 came back from depot with one dead pixel on new replaced panel

    I bought my X220 on May, 2011. It was working great up until last month when suddenly several dead pixels(around 5) appeared on the IPS panel. They were dark dots scattered on the mid bottom part of the display, and were invisible only on dark images. I tried various stuck pixel fixing programs for several hours with not good result.
    I called the support number for Canada, explained the issue and immediately got a call number and a box was on the way.
    Yesterday I received the X220 back after a week and half, which is quite fast for what I expected the service time to be in Canada. When I turn on the machine I immediately notice some backlight bleed on the bottom on the screen given that the old one didn't have any. I thought it would not bother me since I could only see it if displaying dark backgrounds, which is rare for me once in Windows. But I also notice one dead pixel on the mid bottom right of the screen, and it looks darker and bigger than the ones in the old screen. Anytime I'm looking at anything bright colored I see it.
    As of now, while I'm at work the X220 is running UDpixel at home to see if it gets fixed. I was wondering if Lenovo would grant me another repair call seeing that the dead pixel bothers me more than the ones in the old panel, although it is only one.

    @pacho,
    You can try taking a picture of the screen showing the backlight bleed and try contacting support and see if they can get it replace again. Do let them know your previous case number as well.
    Lenovo dead pixel policy here.
    http://support.lenovo.com/en_US/detail.page?Legacy​DocID=MIGR-69856
    However I am not sure if it applies to IPS panels.
    *Non Lenovo employee*
    I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

  • Lumia 620 back from repairs.

    My 620 came back from repairs. Now i dont have the 'Transfer my Data' option anymore. How do i get this option back? I need to get my contacts back from the old fone.

    Transfer my data is an app you'll find part of the Nokia Collection in the store
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore.  What settings should my computer be on and what settings should my tv be on?

    Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore.  What settings should my computer be on and what settings should my tv be on?

    TarahCurrie Sep 10, 2014 3:48 PM
    Restore From Time Machine Backup
    Reinstall OS X
    Get Help Online
    Disk Utility
    MacBook Pro, Mac OS X (10.5.8)
    You are running 10.5.8
    Did you try booting off your Install disk holding the c key down.  From here you can get to the drop down menu just a few clicks in (you are not going to install) and run  the Disk Utility>Repair Disk.  See if it will let you do this.

  • My macbook is back from repairs. It is not working with my apple led cinema display. It was working prior to the repairs on the laptop. Is there a setting I don't know about that might have been changed?

    My macbook pro is just back from repairs.  It is not working with my apple led cinema display. I have followed the directions in the cinema display manual.  am I missing something?

    Take a look at the Displays preference panel to see if everything is ok, particularly the resolution and refresh rate.  Displays will probably try to put the panel for the ACD on the ACD where you won't see it.  So click "Gather Windows" to get the ACD panel on to your macbook.
    One more thing, make sure you fully seated the mini displayport plug.  They can be sneaky little devils in that they need to be fully pushed in.

  • IPhone 4 back from repair scratches

    Earlier in the week i sent my iPhone 4 of for repair to apple care. I had problems with the screen being sometimes unresponsive and the battery holding charge for about a day with no apps being played. Anyway apple sent my phone back with a letter explaining that they could not reproduce these symptoms so i had the same phone. Before i sent my phone off it was in an invisible shield so it only had one or two scratches on the front and back, but now its covered in scratches, what should i do ?

    But it has the same serial number ? and they even said in the letter and on the repair status that the original product has been returned. Its quite annoying how i sent it in perfect condition and now its covered in scratches

  • MB back from repair but with a new problem

    I got my white MB back from repair today. The top case has been replaced because of the discoloring issue, but now the click botton only works in the middle and seems to be loose in both sides.
    So I'm thinking that I have to send it back?
    I must admit I'm getting really tired of this MB!

    Michelle: If you sent it through an Apple Store, insist they have it sent to the store after the repair, instead of to you directly. That way they have to check it before you pick it up.
    My experience w/ Apple's repair depot (Flex) has been bittersweet--they've done some repairs so well that you can't tell it's been touched, others, quite the contrary.
    From what it sounds like, it's not the replacement of the top-case, but the top-case they replaced it with. Maybe not a "repair quality" issue, but part quality.

  • Got iPOD back from repair in worse condition

    Hello,
    I just got my iPOD back from repair due to a defective LCD screen. I had kept my iPOD pretty well taken care of and kept it in a silicone rubber iPOD glove type thing. It had some smudges and scrates on the back and the front when i shipped it. During the servicing i was told they were supposed to clean it well they didnt clean my iPOD and they shipped it back in a box where the thing would shake and roll around. Also on the back of the iPOD where the chrome is the brilliant minds who worked on it decided to put the stickers on the back there and i took them off and had sticky crap all over my iPOD where the stickers had been. I paid $300 for an iPOD that shouldnt have these problems in the first place and i paid for the extended warrenty for situations like this this and im NOT happy with what i have paid for. I would at the very least like a new iPOD to copensate for this issue.
    Thanks,
    Vmontice

    Have you tried calling customer service?
    These are user-to-user boards, nobody here can help with your problem...

  • Hi just done some up dates on my i phone three it got half way through sync with my phone then the phone turned of and came back on again with the i tune picture and the end of the usb cable. but my phone is plugged into my computer can anyone helphi just

    hi just done some up dates on my i phone three it got half way through sync with my phone then the phone turned of and came back on again with the i tune picture and the end of the usb cable. but my phone is plugged into my computer can anyone help

    Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message.  http://support.apple.com/kb/HT1808
    Then you can restore your phone:  http://support.apple.com/kb/HT1414

  • TS3988 I've just received my iphone 4s back from repair

    I've just received my iphone 4s back from repair as a replacement. the iphone is convinced i have an account with icloud in an old email address i no longer use and i havent got a password despite trying everything. what can i do?

    to add to the question above, I am unable to download any apps to the phone as it keeps asking for this password ?????

  • Hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?

    hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?

    If you tried to restore to your iCloud backup and your photos didn't fully restore, first go to Settings>iCloud>Storage & Backup and make sure it isn't still in the process of restoring.
    If the restore is complete and all your photos weren't restored, all you can do is try restoring the backup again.  You might try the solution posted by ezjules in this discussion: https://discussions.apple.com/message/19518589#19518589.  This involves opening the photos app after the phone restarts and you provide the passwords for your Apple IDs, then leaving it open for the remainder of the restore process.

  • I just came back from a family vacation and tried to sync my phone to my laptop. It didnt recognize my phone, and did i want to add device or restore to old device.  i chose to restore and in doing so, i lost all the photos taken on our vacation.

    i just came back from a family vacation and tried to sync my phone to my laptop.  It didnt recognize my phone, and did i want to add device or restore to old device.  i chose to restore and in doing so, i lost all the photos taken on our vacation.  is there a way to retrieve photos?  the completely disappeared from my iphone altogether. I am using iphone 5. I did not have any backup since I was about to download the photo. Please help me. Thank you

    See:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Maybe you are looking for

  • Error in User defined function for dynamic file naming

    Hi, While creating User Defined function with this following code for dynamic fieldname DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION); DynamicConfig

  • Unable to compile servlet files in javac

    i am unable to compile servlet *.java files in javac.as far as i can see my path is correct. Kindly provide a solution as soon as possible. My jdk1.3 is in my c drive and my tomcat in my d drive. if you are able to compile kindly let me know your pat

  • Exchange users get mime.822 on all mail from outside.

    We have GW 7sp3, system with gwia, dom, and po. I just put in exchange 2003 and am using the gw to exchange sp2 connection. I have only one user who does pop and smtp into exchange. All of his emails incoming from the world get mime.822's on them and

  • Creating a banner

    Okay I have created a banner that is 1024px X 115px. The banner has a logo on the left side. What I want to know is the best way to make the banner centered at the top of the page and the background of the banner (everything except the logo) stretch

  • SQL2000 to Oracle 9i Migration - Connection refused

    I am having trouble connecting to SQL Server through SQL Developer 1.2.1 Build 32.13. I am on XP Profesional SP2, had downloaded and install jtds-1.2.2 and when i try to connect i am getting the error, 'Status Failure - Network Error IOException: Con