IMac can't/won't boot from Leopard DVD

My 1GHz G4 iMac can't or won't boot from the DVD, although I know the media is good.
I get stuck on the grey screen, the rotating bug stops rotating after about 5 minutes.
It will still boot from the hard disk fine, and will boot with other DVDs as well. Hardware diagnostics check out fine.
I did try single user mode, it will get there OK.
Verbose mode spits out a lot of messages (who knew? - lol), but nothing that seems to point to any one issue. It too stops spitting out messages after about 10 minutes.
Any ideas?

I did try the clicking the mouse thing just for the heck of it... no joy.
I do see a few other threads like this one, so I'm not alone on this.
The error messages I see are (not going to type them out all the way):
launchd[1]: Failed to count the number of files in /System/Library/StartupItems no such file or directory
Then a bunch of mDNSResponder errors, also saying either no such file/directory or invalid destination port.
Then a message saying Folder Manager is being asked to create a folder (cach) while running as uid 0
Then Cannot use ATS Persistent Store - switching to old FODB cache code
kextd[47]: root filesystem is read-only; skipping kernel link data generation
followed by a couple of errors from configdp[41]
Then nothing....
Still stuck...

Similar Messages

  • MacBook Pro Won't Boot from Leopard DVD

    My brother's MacBook Pro (2009 13") won't boot from the Leopard install DVD. Here is what happened:
    - I tried to do Bootcamp on it. I installed Windows 7 but realized that there were no Bootcamp drivers for that.
    - Deleted Widnows 7 and put the XP install disc in. Somehow, it formatted my Mac partition instead of my Windows partition.
    - Now that the MBP was only running Windows XP, I connected it to my iMac in target disk mode and wiped it (GUID, one Mac OS Extended (Journaled) partition).
    - I tried to put the Leopard (10.5.0) install DVD in there so I can restore from the Time Machine backup, and it sees it when I hold option at bootup but refuses to boot from it.
    - I reset the PRAM and tried again, no luck.
    What is going on here? Does it have to do with the fact that it was doing Bootcamp? I either want to boot from the disc or somehow restore from Time Machine some other way. I can use another computer (my iMac) if I need to.

    Haha yeah, I posted right before. The thing I'm wondering now: Does this mean that a Mac that came with Lion cannot be downgraded to Snow Leopard? Well, I'll save it for another question if I ever cross that bridge.
    Limnos wrote:
    Just so we know, this is the original OS disc that came with this computer?  Even if you're trying to use a retail installer disc I am not sure those came out the the sufficient sub-version required to boot the computer (I think it needs at least 10.5.7 but don't have the specifics of your model).
    Edit: I guess I'm a slow typist.

  • BRAND NEW Mac Pro won't boot from Leopard DVD, kernel panics!

    I just received my brand new Mac Pro today. It's a BTO machine with the upgrade to the NVIDIA 8800GT, a second optical drive and a Mac OS X Server license. The system has Mac OS X server installed on the default 320GB drive. I decided to use the server license as a virtual machine running in Leopard client. So, I installed 2 new 500GB Seagate 7200.11 (Retail) drives in the machine, zeroed them out in prep for installing Leopard client.
    At this point, I pop in a freshly-purchased retail copy of the Leopard DVD and restart. When I try to boot from the DVD and install Leopard to one of the new Seagate drives, I get kernel panics - need to restart the machine. Also tried booting from the Mac OS X Server DVD and this too only caused kernel panics. The DVD's read perfectly from within Mac OS X Server and boot from hard disks is flawless.
    I spent an hour on the phone with a level 2 tech at Apple - Tried swapping out the RAM and moving around the DIMMS to no avail. I am at a loss to what this could be. Seems to be a hardware issue and the tech thought it was likely a problem with one of the memory risers but couldn't send replacements. Anyone else with a similar issue?
    This is my first Mac and it looks like this Mac Pro is going back for an exchange and I'll have to wait yet another 10-12 days for a replacement to arrive. Bummer.
    Am I missing something simple here? Does this seem to be a hardware issue?
    If anyone has any ideas before I ship this one back, please write!!!

    New Mac Pros will not install the Leopard retail disc. They will only install the Leopard disc which shipped with them labeled Mac Pro. That has always been true. Macs can only boot the system that ships on DVD in the box that came with them, and newer retail releases. They can never boot from an older retail release than what shipped in the box.

  • 2008 MacBook Pro won't boot from Leopard DVD or Target Disk

    Yesterday I was working on my MacBook Pro. I use FontExplorer to manage fonts. I ran the conflicts diagnostic looking for missing font files, which returned about 200 results (I was expecting this). I've moved the fonts installed by Adobe/Microsoft out of my fonts folder in my user library (user library, not system). For some reason the computer started to become very slow, to the point of beachballing. The freezing seemed to start and stop. I was able to close FontExplorer and Illustrator without force-quitting. I tried to shut it down gracefully at that point but it froze up again, so I hit the power button to force a restart. It started up but now it hangs on the gray screen right before the Apple logo. The logo doesn't come up, I can hear the drive spinning as normal but it doesn't do anything.
    I've tried booting from a retail copy of the Snow Leopard, but it doesn't work. I can hear the disc spin up in the DVD drive as though the computer is about to read it, but nothing happens. It just stays on that same blue screen. I've tried booting my MBP in Target Disk mode from my iMac. The target disk icon appears, however it just sits in the middle of the screen and my drive doesn't mount on the iMac. I've noticed now that the white status light on the front of the MBP (on the latch) doesn't come on, and if I cover the speakers the backlight doesn't turn off.
    What do I do now? I have an enclosure I could use to try and boot the MBP's drive from, but I'm running out of options. I'm really starting to worry about my data. I have a major school project that's already late which is on there, and I don't have a recent backup. If I don't hand it in... let's not go there. I don't understand how this could happen; I take very good care of my computer, I turn it off when it's not in use, and I run Cocktail on it once a day which does a SMART status check.
    Help?

    sig,
    The first thing I tried was booting from the install disk. The 2008/2009 MBP's aren't able to boot from a retail DVD of Snow Leopard, which is why I ended up using the original hardware-specific install disk that shipped with my computer. That didn't boot either. I was able to view the drive in Disk Utility when it was in the enclosure, but the partition with my data on it would not mount. I attempted a repair disk on the drive but that failed. It wouldn't mount in Terminal either. I considered trying to rebuild the volume catalog using TechTool Pro but there's the possibility that could actually make things worse. So I've taken it to the repair shop. They're running it through DiskWarrior overnight, last I heard there were 60-something thread errors. Yesterday my SMART status was fine, today my drive is dead. What happened? Hoping for the best (but expecting the worst).

  • Problem: installed new hard drive but can´t boot from leopard dvd

    So I just installed a new hard drive in my ibook G4. At first I started up the computer using the leopard DVD I had purchased. Got to Disk Utility and after a few seconds in the spin wheel came up and froze. So, I shut the computer down and when I tried to boot it again from the DVD I wouldn´t even reach the apple screen. Tried it a few times unsuccessfully.
    As an alternative I just tried booting the comptuer using the original CD and it did read it.
    I am currently at the installer page but I am concern about installing the old CD as I really would like to run the leopard dvd 10.5.
    Is it that my ibook g4 can´t be booted from leopard dvd?
    Please advise. thanks!!

    OK, so I decided to leave my computer resting all night and give it a new try this morning.
    This morning I was able to boot from the Leopard DVD, so I don´t really think it is a problem with my superdrive. Started to format at 32 minutes to complete. Then towards the 10th minute the spinning wheel appeared, I heard the fan running, then it stopped and then I heard the superdrive making some reading noises. Then all noises stopped and now the spinning wheel continues..not sure what to do now.
    In the meantime, I wanted to share also another problem that I´ve been having for quite some time which I don´t know if it is related to my current problem. It is with the computer power:
    - I´ve been experiecing load surges that take my computer from 100% to 1 or 0% and then goes to sleep or shuts down. The same thing happens when I am charging the computer.. it starts charging and showing 2 or 3% charge and then jacks up to 100% in minutes.
    - My computer also makes like a slight humming noise sometimes when the ring around the power cable is in orange color, so I move it around until it stops. When I do that sometimes it goes from orange to green eventhough it is not fully charged. There has been times that under green it appears to be charging (battery charging icon on desktop shows up), and other sometimes like right now when it is in green color and the battery icon on the desktop says ´99%´. Weird enough, once I get the cable in a certain position it enables the battery to charge, if I keep it without moving it, the load surges disappear (at least for some days).
    Should I try resetting the PMU? I´ve not done it because I don´t know what consequences it may have.
    NOTE: When I bought the computer I never calibrated my battery because I was (and still are) clueless when comes to computer technicalities. I tried using a different power adapter and get the sample problem.
    Below is the information I get from coconut battery:
    My battery is in its 256 load-cycle. current battery capacity 58512mAh (original battery capacity: 4400 mAh).
    The last system profiler I was able to pull shows:
    Battery Information:
    Charge Information:
    Charge remaining (mAh): 58320
    Charging: No
    Full charge capacity (mAh): 58512
    Health Information:
    Cycle count: 256
    Battery Installed: Yes
    Amperage (mA): 0
    Voltage (mV): 16250
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 15
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 15
    Dynamic Power Step: Yes
    Reduce Processor Speed: No
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Wake On Modem Ring: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 5
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 5
    Dynamic Power Step: No
    Reduce Processor Speed: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On Modem Ring: No
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    Clamshell Closed: No
    UPS Installed: No
    AC Charger Information:
    AC Charger (Watts): 26
    Connected: Yes
    Charging: No
    Any help is greatly appreciated.
    Thanks a bunch!!!

  • Won't boot from install DVDs

    I have an iMac here that refuses to boot from the install DVDs, no matter what.
    I tried booting using the alt key, the C key, using the DVD in the Finder and restarting and via the startup disk in the System prefs. I always get one of the two following results: - either the DVD seems to startup, but then puts itself into a loop where it doesn't get to the installer and restarts the computer, - or it simply bypasses the DVD altogether and boots from the the internal hard disk...
    I tried using various (full and legit) OS10.5 installation DVDs with the same results as above...
    I've performed these operations many times in the past without problem, and It's actually the first I see a Mac that refuses to boot from an install DVD...
    I thought maybe if firmware password protection enabled somehow... Would that do that?

    You need an installation DVD to turn firmware protection off, ironically.
    I doubt it is the issue here, though. If it was enabled, it would show a grey lock when you try to hold down option while booting up.
    Is the iMac you are trying to boot from the DVD Leopard compatible as far as processor and RAM? My brother's iMac w/ 256 MB RAM cannot boot Leopard at all.
    Message was edited by: Mac OS 9000

  • Hi guys I'm really in need of some help. I have an IMac I3 for a while now I've been having a problem of my machine refusing it shut down , it goes to a blue screen with a spinning wheel but doesn't shut down.  And now won't boot from install DvD

    Please some one help me ...
    A) my mac won't shut down with external HD connected (if it's been used)
    B) there are disk permissions that can't be fixed SUID stuff ..
    C) I have now verified the Mac HD and it tells me it's corrupt in bold red writing and to start up from install DVD
    D) it won't boot from DVD so I cannot run the repair , initially the machine was spitting it out on start up , now it appears to be attempting to boot off DVD , well it sounds like it is .... BUT it's hanging with the Mac Logo and a wheel ... For um .... 30min now...
    E) weirdly when OSX is booted off the hard drive , it won't recognise the Install DvD or the applications one... It just spits them out....
    I had an old PPC 17" and it was a beaut .... Never had a single problem with it ...
    I bought this one December 2010 and it's been nothing but issues for a computer in excess of £1000 I'm extremely disappointed ... And weirdly the shutting down issue started when it was a week out of warrantee ... I feel conned and am almost at the point of throwing it at a wall and buying a PC

    Ok so I've done what you said and this is what it's come back ....
    I don't know that these are the errors , but they're the things which don't look right ...
    Throughout the shut down there is a recurring line ;
    It says ;
    Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
    Then there are 2 more which I think are related ;
    Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
    Then the same with fseventd 48 and diskarbitrationd 13
    Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
    Then the last process says "about to call: reboot (RB_AUTOBOOT).
    Continuing...
    And stops ...
    Hope this means something to you ... Thanks again for your help so far :-)

  • Won't boot from OSX DVD

    I am running 10.4.8 on a MacBook Pro--suddenly it tells me I can't install this OS on this computer (?). Also, it won't boot from the Tiger DVD (all other DVD's work fine). I tried holding down "C) on startup and even the cmd-opt-shft-delete combination. Something strange here. I'm wanting to install X11 but can't get the DVD to work. What can I try?

    You cannot install a prior version of OS X on any Mac unless you: a. Do and Erase and Install; or, b. Do an Archive and Install. However, neither of these is needed to install X11. Insert the OS X Installer Disc One (gray label) that came with your computer. Locate the Additional Software package and double-click on it. When the installer loads you can select the items you want to install by placing a check in the box beside the item's name in the list box. Check the X11 box then click on the Install button.
    You can only boot an Intel Mac using the installer disc that came with the computer (gray label.) Retail installers (black label) will not work with Intel Macs.

  • Hp pavilion entertainm​ent pc won't boot from cd/dvd

    Ok so hopefully I can figure this out... My sister gave me her laptop to restore for her because the last guy to fix it for her put a bootleg windows 7 on it so I went out and bought a real version of windows 7 for her but it won't boot from the cd/DVD drive all I get is a small line on the top left corner and then it boots to the desktop I changed the boot options through the bios and tried everything else but nothing seems to work... Help?

    Hi,
    I would first like to thank you for being a part of the HP Family. I have a document on a possible solution for your issue regarding the recovery disks.
    Recovery Disk
    If more assistance is needed please reply
    Thanks for choosing HP
    I work for HP, consumer notebooks and desktops.

  • SP6000 won't boot from a DVD (but does boot from CD)

    Hi,
    It's the second time I try to boot a Linux Live DVD (burnt on DVD-RW), to no avail: the disk spins for a few seconds at several (low) speeds, then the boot reverts to HD. On the contrary, it boots fine from a recovery CD or a Win installation CD (both burnt on CD-RW).
    Is this a known "feature" of the SP6000 BIOS, or of the drive (Toshiba SD-C2502)? Can this be circumvented?
    Thanks for any help.
    L.

    For some reason, I've had to change the BIOS' boot order (typically F2 at start-up) to have the CD/DVD drive in the first position when booting from a DVD in order for the drive to complete the process.  Merely selecting the CD/DVD drive by hitting F12 is insufficient. 
    It appears that the CD/DVD drive either resets or is powered down too quickly to get through the amount of data on a DVD, but a CD is small enough to finish the load.  Reordering the BIOS seems to keep power and attention on the drive though.
    Let me know if that works.
    Everyone has a naughty side...mine gets paid

  • DVD drive won't boot from Leopard or Tiger disks

    Hi,
    I have had some issues booting from the OS install disks with my DVD drive, is it the drive or is it the software?
    Can this be fixed?
    Thanks
    Tom

    There are known issues with some Leopard discs not booting, but if your Tiger disc won't boot either, I would say you probably have a defective optical drive.
    -Bmer
    Mac Owners Support Group - Join us @ MacOSG.com
      Mac611 Mobile Mac Support - about.Mac611.com
       iTunes:MacOSG Podcast | YouTube.MacOSG.com
                       An Apple User Group 
    Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

  • IMac 24 Aluminum won't boot from USB Hard drive

    I just got an iMac 24 from the Apple Refurb store. It comes with Snow Leopard, but I need to install a Leopard partition for my wife to ensure 100% compatibility with Photoshop CS3, among other things. I created a partition just for Leopard, so that's good to go.
    I can choose the boot partition on my Leopard install drive when starting by holding the "alt" key, that's no problem. However, after I choose that USB drive, it reboots... over and over and over and over. To be sure it isn't the drive, I tested it with my Macbook Pro, and it booted up just fine. I tried another USB drive, same exact problem.
    I don't have a Firewire external that I can repartition for the purpose of installing Leopard. I only have it on hard drive. Then I tried making a DMG with disk utility and burning it to a DVD+R DL, but it tells me the disc isn't large enough, even though it's 8.5GB and the image is 7.6GB.
    Pulling my hair out here guys! Is this refurb a lemon?

    The Leopard install DVD I used to make the image is not available, it got stolen along with laptop bag it was in last Spring.
    Is it this "image" (clone) of the installation disc that you are trying to boot from a USB drive, or a full installation of Leopard? If it's a clone of the installation disc on a USB drive, there are a few considerations.
    First, what type was the original Leopard disc (the one you lost)? Was it a retail disc (the type sold separately in a box) or one that came with another Mac model, such as a MacBook Pro. If it's the disc from a MacBook Pro, it will not work because your iMac is a different model. Those included disc usually only work with the model it came with.
    If it's a retail disc, the other consideration is the version on the disc. If you look at that everymac.com profile page, it says that the (earlier) pre-installed version of Mac OS X is 10.5.6 (9G2030). If that retail Leopard disc was earlier than 10.5.6 (such as the original 10.5.0 disc), then it will not boot that iMac because, as I said in the first reply - +Macs can generally boot the version of Mac OS it came with, or LATER (up to hardware limits), but NOT earlier.+
    If that USB drive you are trying to boot the iMac from has a full installation of Leopard, please post back.

  • IBook G4 won't boot from Leopard 10.5.6

    I recently acquired a used iBook G4. Unfortunately the seller had a password on the system, and I am unable to get past the login screen. I've got a fresh Mac Box Set of OS X Leopard 10.5.6 and was planning to do a clean install anyway, but I can't get the system to boot from the Install DVD. I've spent almost my entire day scratching my head over this. Any help would be appreciated.

    jrquebe:
    I'll be honest here... I'm not really a Mac guy.
    That's okay. Welcome to the club of Mac users. Someone just wrote in another thread, "I think Macs make the world a better place."
    In any case. You said you are able to login with Panther, but it doesn't load the GUI. That is not normal behavior. So there must be a problem with the installation.
    Here are the Leopard installation system requirements. Let us assume that your system meets the minimum requirements. Now, to booting from the install disk. Try this:
    • Insert install disk in optical drive
    • Hit Power button and immediately after chime
    • Hold down the Option/alt button.
    • If this works bootable volumes should show up on a gray screen.
    • Select the install disk and click the straight arrow.
    If this does not work you have either a defective optical drive or a defective disk. Please post back with an update of how/if this works.
    cornelius

  • Imac (slot loading) won't boot from CD

    Hello,
    My imac (350 MHz G3 blue coloured) does not want to boot from a CD. I need to erase the hard drive with the Disk Utility but it will not start up from the CD. I held down the "C" key at startup and it keeps flashing the question mark symbol at the grey screen. What can I do?
    Can I use open firmware commands? I already tried reset-nvram and reset-all but that didn't work.
    You see I better give the background info here:
    I removed the original 9 GIG hard drive and replaced it with a blank 80 GIG drive. I thought I could then format it from a startup CD and then reinstall the OS. No luck. It doesn't boot at all from the CD.
    Then I tried taking out the hard drive again and this time I installed OS 10.1.5 onto it from another computer. (It is the only appropriate OSX I have.) I then put the hard drive back into the slot loading imac and hoped the imac would like it and boot up. Again, no luck.
    Any suggestions,
    can I use some magic open firmware commands?
    Did I not install the hard drive correctly? i.e. are you not supposed to just remove and swap hard drives with imacs? I just followed a pdf instruction manual - didn't take than long.
    How can I make this imac boot? (Its stuck on the grey screen with the flashing question mark.
    Thanks!

    A Jumper is meant a little -mostly- black plug that connects two pins of your harddrive. That Pins are next to the connector where the cable is plugged into. There you have two pins for Master, two for Slave and two for Cable select. You must select Master in a 350 MHz to get the HD working.
    Just ask someone in a Computer store to help you with the Jumper.
    By the way, my 350 is the only iMac I have seen which doesn't even take a notice of presseing "C" at startup. I have to press the Option (ALT) key and select the CD Rom from the boot up menu. Everything else is ignored...

  • IMac G5 iSight won't boot from external optical drive . . . FW or USB

    Hello, all. I have an iMac G5 iSight with a busted optical drive. Every six months or so, OS 10.4 eats itself (directory structure goes corrupt), and I need to reinstall.
    The issue I'm having is that the computer won't boot off of my external optical drive. It's not shown as a choice in the Startup Manager, whether it's connected via USB or FireWire. Any ideas?

    Okay, sorry this took so long . . .
    Reset the SMU, NVRAM, and PRAM, no luck. Tried different FireWire port on the iMac, no luck. Tried different FireWire port on optical drive--LUCK.
    Ah.
    Wipe and reinstall got underway, and finished the first part. Unfortunately, my OS 10.4 Disc 2 turned out to be scratched, and wiping the hard drive didn't get rid of the logic board error either.
    Took it to Apple retail store, and it was BOA (bricked on arrival). Astoundingly, it would not power, POST, turn on the fans, nothing. They then replaced the power supply, so they could troubleshoot the hard drive/fan/whatever issue.
    Now the computer POSTs, and they finished the reinstall, and said it passes their advanced diagnostics. I asked them to run the diags on the install CD, so they could see they fan error, and they agreed. That was around 7:00 last night.
    Now, it's still at the store, and I'm eagerly awaiting word on what might REALLY be wrong. Thanks for your help so far!

Maybe you are looking for