IMAC COLOR FILTER PROBLEMS (ColorSync)

Tengo un iMac de 27"- 2013.
Apple anunció la versión gratuita de Mavericks y reemplacé la versión anterior del sistema operativo.
Luego apareció un problema. Al encender la computadora, los colores de las fotos están saturados o más oscuros.
Alguien me aconsejó comprobar y reparar los filtros en ColorSync.
Apareció un cuadro indicando falta de 4 etiquetas requerida "PSEQ" que no pueden ser reparadas.
Seguí el consejo de instalar "Módulo de Gestión de Color de Adobe (CMM)", pero esto no resuelve el problema.
Alguien podría ayudarme
Revisé un iMac en una tienda de Apple y no aparece ninguna advertencia de este tipo.
Muchas gracias por su ayuda.
[email protected]

Just an update for others. I did a fresh install of Snow Leopard without using my time machine back-up... I then restored my files after the clean install and the problem has gone.

Similar Messages

PLEASE HELP - COLOR SHIFTING PROBLEM on output NTSC monitors

http://www.smmlv.com/testproject/
Above is a link to a layered photoshop file that has a USA map and over a dozen network overlays used in a section of our video. I animate each layer on sepeartely in the video and have noticed a major problem recently, the color of the art does not hold true to placement. I created the art originally in Illustrator and then converted the file to Photoshop at 640x480, 72dpi. This has always worked perfectly in the past to display and animated artwork in FCP.
Right now, in FCP I am using the NTSC DV 3:2 frame size, and the compressor of DV/DVCPRO - NTSC. I have a JVC Profressional DV deck that hooks up through firewire and sends S-Video to my monitors. This setup has always given me a great picture even though it is not completely upcompressed. Using these settings and this art, the color lines on this map in red, light blue, yellow and purple all have a "color shift" to the left about 5 pixels. It makes it appear that the line is where it is in the file, but the color overlaying the line is offset to the left 5 pixels and transperant to about 50%. This occurs only when viewed on some TV's and NTSC monitors and projectors. The strange thing is, some monitors display the color aligned almost perfectly on these maps and other monitors and projectors show this "digital halo" of color shifting really bad. If I take the layered network overlays in these colors and color tint them to black or grey, white, light green, or even light orange, they no longer have the color shifting and the detail is perfect.
Is there any way to fix this problem? I have tried duplicating the sequence and setting the compressor to 8bit Uncompressed, and while my captured footage is not this compression, in theory the art should render at this higher resolution setting. This did nothing to solve the problem.
I also have tried using different Broadcast safe and Y/C corrector filters with different results. The Y/C filter allowed me to reposition the color problem and thus removing most of the problem, but also removing most of the color. Nothing else has allowed me to seemingly move the color into the proper possition.
What is causing this color shift on the displayed NTSC image?
In FCP 4.5 I can see my rendered video in the program viewer screen and besides the pixel compression appearing on the lines, overall the video looks great paused or even better when playing. Then you view it through my deck onto my Pro Sony NTSC 19" color monitor and it also appears great, with a slight color halo to the left of these colors, but the color in the lines are there. If you are a few feet from the screen and know what you are looking for you might see it, but doubtful. Then you view it using the same signal on a 17" Samsung TV and the color shifting makes the map and other art, like the clients blue logo, look horrible, with each color line appearing twice and offset left from each other as if you had double vision. Normally I would think it is the TV causing this, but then we tested this same movie on 2 differnt projectors. The $700 Epson projector displayed everything beautifully, again with only the slightest color halo to the left, but then the Panasonic $4000 projector made everthing in these colors look double vision again. What is going on???
One more thing to keep in mind, my color bars also show this problem with these colors as well as shot footage of these facilities. There are tall red poles in the shots and everything displays fine except for the red pole color looks like it's glowing off the pole to the left.
PLEASE tell me there is a solution to this.

I have tried Degaussing, using filters, changing cables, and testing other monitors and systems on these monitors, everthing I can think of to solve the issue. Is it FCPo or is it the monitors?... or is it a signal strength thing. Can monitors and projectors shift color when the signal is read from a DVD or Mini DV Deck? Is there a fequency difference (Ie: 75mgz or 80 mgz) that might be causing the shift in some monitors and not so badly in others. But if this was true, how would some DVD's (like Baby Einstein DVDs that use really bright colors) display red and blue perfect using these same player and monitor, while my projects is shifting color? Doesn't that rule out the signal from the DVD player if other DVD's do not have this issue?
I have uploaded the original art used, an exported .jpg file from the FCP timeline and sample photos of 2 different monitors to show to show this problem as best I can. http://www.smmlv.com/testproject/
Someone out there must have had this problem before. There's no way a color shift problem like this with Mini DV has gone on this long without someone seeing it.
One last thing about what I have tried... I do understand that with editing in Mini DV instead of uncompressed or HD video I lose a bit of resolution (4:2:2) and I see this compression occuring in some of the areas in the video where these problems persist. But, I did remake the art and rerender this project in an 8bit uncompressed settings and then displayed that up on the screen and I get the same color shift. I keep going in circles trying to find the culprit that is causing the delema.
PLEASE HELP! There are large tours going through our facilities daily and the large screen projector is displaying this problem as well. Let's just hope they don't notice and that their TV's at home or office does not display it on our final DVD's made.

IMac Colors

Hello,
I bought my 24" iMac couple of months ago and I am a web and graphic designer. I have a problem with the monitor colors since colors are much brighter than what I see on any PC, I tried to change the brightness of the monitor and tried changing the color profiles but whatever I do the color still much brighter.
My problem basically is that when I design a website, the colors look great on my iMAC, but when my clients view them on their PCS, they always comment that the colors are very dark.
The question: What can I do to match my iMAC colors with the standard PC colors. I do understand that flat panel monitors display brighter colors in general.
Thank you very much.
iMac Mac OS X (10.4.10)

Hi there,
The easiest thing you can do is calibrate a display profile using expert mode...
the important change <imho> will be Target Gamma (mine at 2.2 PC) and Target White Point (mine at D50), these 2 settings will reduce the extreme brightness (and cold colors) you're seeing. For my brightness, I am 4 bars from the minimum...
The other settings like Native Gamma, adjust and step back away and view the results and adjust again if needed... I would save as under a new name so you don't overwrite any current profiles...
And I've always been told, do not work in a room where the ambient lighting is greater than your dislay brightness...
Rick
iMac G5 iSight 20" - 30G iPOD & Hot Pink Nano 4G - WD 500G FW - Mac OS X (10.4.8) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620 Kodak P880
Message was edited by: JMEH
You can also purchase Monitor Calibrating tools, some are automatic and some need user feedback.

I have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

i have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

I used the ColorSync utility to verify, and it came back with this report:
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/ICCProfiles/SPR800 Standard.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
   Tag 'desc': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/ICCProfiles/Standard.profiles/Contents/Res ources/Epson IJ Printer.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/
I did not know what to do next. At the bottom of the window it said to go to www.apple.com/colorsync to find a tutorial. I got a message saying that link does not work. Tried to find the tutorial by searching at apple.com, but could not seem to locate it. Does anyone know what the report above means and what I should do about it?
Also, how to find that tutorial?
Re Using RGB all the way through, When I print from Photoshop Elements, I select Adobe RGB, Photoshop Manages under "Color Handling", Relative Colometric under "Intent" and "ColorSync" i the Epson printer box. Do you mean to do something different in this sequence?

Printing with the iMac -- "Color Matching"

I have an iMac running OS10.6.8 and I am printing photographs to an Epson 3880 from the photo editing software Nikon Capture NX2. In Capture NX2 I set colour management to application manages colour as well as choosing the profile to which I want the printer to print. At this point I also choose Intent and Black Point Compensation. I hit print and up comes the print window under OS10.6.8. Here I choose to turn off control of color management by the printer driver under "Printer Settings" from the drop down menu titled "Layout". When I come to the item "Color Matching" in the drop down menu I find that "EPSON Color Controls" is highllghted. But at this point I can deselect this setting and select "ColorSync". If I select "ColorSync" I then can choose from "Automatic" or any of the paper profiles I have on my computer. What determines which one I choose, that is which of "EPSON Color Controls" or "ColorSync"?
I was inclined to think that it was "ColorSync" and then choose the profile that I chose back under the NX2 print window. But this produces bad results. If I leave it to "EPSON Color Controls" I get perfect results (at least so far). But the name of this choice seems to suggest that the Epson print driver manages the colours which I do not want to happen. So I would like to understand what is going on here. What is one doing when one make the various possible selections that one can make under "Color Matching"?
Regards,

Hi br3753,
I know you mentioned already doing cleanings, but I wanted to recommend if you havent already done so to please try 3-4 consecutive cleanings for the best results. If this does not work I would recommend using the Contact Us link to get in touch with out live support staff who can provide warranty options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have an iMac4.1 and my iPhoto is very slow and the thumbnails correspond to the wrong pictures. How do I fix this? Or is my iMac too old? Will getting a new iMac solve this problem?.

I have an iMac4.1 and my iPhoto is very slow and the thumbnails correspond to the wrong pictures. How do I fix this? Or is my iMac too old? Will getting a new iMac solve this problem?
I realize is only 512MB of memory but I want to make sure that a new iMac will solve this problem. Can the new iPhoto handle 10GB or more of photos? Or do I have to go to Picasa anyways in which case I can buy any computer to do that?

The model of Mac is not partcularly relevant, it's the version of the OS and iPhoto that matter.
iPhoto - since 2006 - is good for 250,000 images.
Regards
TD

Color saturation problem in Acrobat Reader 7.0.9 under Linux

Hi,
I'm working with a guy who is producing PDFs of my work with Indesign.
Using acrobat reader under Linux (version 7.0.1 and also 7.0.9), the colours in these PDFs always appear very saturated. This is a big problem for me because I cannot see with the reference viewer the results of PDFs to be sent to print.
I tried the same pdf file under OS X & Windows, it appears OK with Acrobat reader. Other free pdf readers under Linux also show the right colours (but not always the transparency ;-).
Does anybody has an idea to help me?
@Adobe people: in case you want to test, I drop a copy of my PDF file at: http://cardot.net/files/pdfcolours.pdf (2.24 MB)
Thanks in advance
Jean-Christophe Cardot

We are able to reproduce color saturation problem at our end. We have noted down and will work on this.
Thanks.

Color Separations Problem in Acrobat 8/9 Pro

We recently discovered a color separation problem in Acrobat 8 Pro and 9 Pro. In version 7 Pro we could select and thus include 'empty' color sep pages. Now when we select seps of the all the available colors, seps are produced only for those colors actually used in the job. This is true of pre-separated and in-rip seps. Can anyone shine some light on this 'change'? Thanks!

We are able to reproduce color saturation problem at our end. We have noted down and will work on this.
Thanks.

Pavilion dv7-4060us Color Printing Problems...

I just bought a new Pavilion dv7-4060us Notebook and am having problems printing in color. I have a Xerox Phaser 8550DP PS Printer that I'm trying to connect to through a wireless network connection. I can find the printer on the network and install the "Xerox Phaser 8550DP PS" driver online just fine. But, after all that, when I try to print, it will only print in Black and White. For some reason it just will not print in color. I've looked through all my "printer properties" and it doesn't even show color options! It's like my computer just doesn't even recognize that the printer can print colors. Like maybe that printer's driver is for some reason not recognizing it as that actual printer?!
I tried deleting the printer and the driver off my computer and installing it using the printer's original CD, but it says it's not compatible with Windows 7 OS. But installing the driver via online and using the CD should basically be the same thing shouldn't it? So that can't be the problem. The "HP printer help website" doesn't really help at all because it's a Xerox printer and not an HP. After reading through some forum posts I figured maybe it was a firewall problem, but wouldn't the firewall stop me from printing all together...not just prevent me from printing color?
Has anyone seen this happen before or heard of anything like this happening? Right when I got the computer I kind of went through and deleted a few things I thought were Crapware, so the only thing I can think of right now is that maybe I accidentally deleted some kind of software program that lets me print color?! Which doesn't really make any sense, so I don't think that's it.
Also, I know it's not a Windows 7 OS problem or my wireless connection because my brother's computer uses Windows 7 and connects through wireless as well, but his can print color just fine. He set his computer up like a year ago so he can't remember how he set it all up or what he did, so he's kind of useless.
As of right now the only thing I can think of to do is try posting on this HP help forum and post on the Xerox Printer help forum and see if anyone has any advice for me. If you have any ideas I'm up for trying anything because I pretty much NEED to be able to print from this computer!! Any information can help out a lot so just let me know. Thanks!

I have exactly the same problem with my dv7-4171us, my husband has the same printer and it print fine on my Xerox but mine only prints in black and white, its very frustrating. I called HP and after 2 hours on the phone they couldnt fix it either.
I'm thinking of doing a full "f11" factory restore. If anyone knows how to fix the color printing problem please let me know.

Lightroom (ACR 4) color management problems

Lightroom (or ACR 4) has some color management problems. When I develop a DNG into Photoshop (sRGB) everything looks great. Then I proof colors for the web (monitor RGB) the reds become oversaturated. I don't see this problem when I develop the same DNG using Bridge (ACR 3).
Any picture that I develop using LR that looks great in Photoshop, becomes way too red when published on the web.
Whats going on here?

I have confirmed this finding using Photoshop CS3 beta - same problem in converting to the web - too red!

Color Scheme Problems in Ultiboard

Hi, I've been having trouble with the color scheme problems in Ultiboard ever since I upgraded form 10.0 to 10.1. The color schemes will not save in Ultiboard 10.1, even with the new patch 10.1.0.1, this problem is persistant.
Here's the problem in detail:
In global Preferences, I click on "Colors", and then New Scheme, give it a name, and I define my colors. However, when I open a new file, the colors are reverted to the default. When I check the preferences again, the name that I have given to my color scheme is labeled as "User settings", and they are the same as the default colors.
This is really annoying as every time I open a file, I have to change the color schemes. It seems like these settings are not being saved in the user-configuration file for some reason or another.
I have tried deleting my user-config file in the user directories, and started new user-config files, but to no avail, the problem is persistent. The color just will not stay.
How do I get around this problem?
-J

Hello,
Thanks for reporting this. I was able to reproduce the issue and created a defect report, ID: 112869.
Fernando D.
National Instruments

Frozen iMac with Network problems

I have a 21.5 inch iMac purchased around Nov'12. Three days ago, suddenly no web page could be opened. I thought it to be a problem of my router but when I found out that I was able to use the Internet perfectly from my MacBook, I restarted my iMac but the problem remained. I shut it down & then restarted it... Now it showed only a white screen with the Apple logo on it and the waiting symbol. This remained till hours until I got irritated and switched off the power supply. I switched on the next consecutive days but the problem persisted. Today fortunately my iMac started.. The home screen has come... It is able to recognise my wifi & Ethernet but does not open any web page. Going to system preferences and then to Networks is hanging the system preferences window. When I force quit it, it says to file a report to Apple.... But the problem doesn't get solved... I always believed Apple as a company whose products never hanged up or faced hardware or software issues!!!

Hello,
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions, reboot.
If you still have problems, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

Color profile problem after installing CS4

OK.
First, let me post these side-by-side comparisons:
As you can see in Image 1 (the "before," left-side photo in each comparison), the colors and overall appearance are distorted. I've read things about gamma but it's all confusing to me. This is surely a color profile problem, right? The transition among pixels that involve colors of yellow and gray is rocky, grainy, and the flat out color is just wrong. Now this color problem affects pictures when opened in both Photoshop 7.0 and the standard Windows Photo Viewer. Meaning, whenever I open pictures in both PS 7.0 and Windows Photo Viewer (my default viewer), this color problem totally messes up certain photos and really damages my ability to edit. I'm an avid photo editor and it's imperative I have proper color display so that I can accurately edit. Keep in mind that certain pictures do not take on this error. When a photo is generally brighter, the distortion is basically invisible. It's photos that are dark or have dark portions in them that display the distortion.
*Note: I took these before-and-after pictures with my camera, because screencapping would not work, since you all don't have the same color profile issue on your computer. That's the only way I can show you!
HOWEVER, when I open photos in another standard Windows application, "Microsoft Office Picture Manager," the color problem is magically erradicated altogether. It shows photos as I've been seeing them all along, until I installed CS4 about two weeks ago. Before installing CS4, everything was fine and I had been using Photoshop 7 for years and have never had a problem. I'm guessing CS4 messed something up. It had to have. Just FYI, I uninstalled CS4, hoping it would reverse the problem. But still, the color issue persists in PS 7 and in my regular Windows Photo Viewer.
Since images display their true form in Windows Office Picture Manager, I don't think I need to calibrate my screen. Or do I? I've read things about it, and to some people, it's not necessary. Right? Okay. I really hope someone can give some advice! Thank you!
P.S. Here's the original photo. On my screen, it looks distorted when opened in photoshop or opened w/the viewer. However, here on Firefox, it's fine.

You should try to familiarize yourself with the concepts of color management.
It's kind of too in-depth a subject to walk you through from a cold start here... There are a lot of good resources out there to help you get started. For example, in just a few seconds Google turned up this:
http://www.adobepress.com/articles/article.asp?p=1315593
The one thing to remember is this: There is NO quick solution, easy set of defaults, or direct answer to making your setup do what you want without your having to understand color management.
People may tell you to calibrate your monitors, or use a particular color profile as a default, or whatever, and they may have good, solid reasons for telling you those things, but if you don't attempt to get your mind around color management it will always seem as though something isn't working right, or is simply magic, which will be frustrating to you.
Here are some basic questions to ponder:
What image color profile is your image carrying?
Is your monitor a wide-gamut display and do you have a color profile set up for it? What kind of monitor is it?
What version of Windows are you running?
Do you know the difference between a color-managed app and one that is not color-managed?
Which of the apps you're using/showing above are color-managed?
What are your settings in Edit - Color Settings?
Take some time and do some research, get your head around the concepts, and it will all make more sense I promise you.
-Noel

How to solve the Embed Color Profile problem...

Hi Everyone,
This vijay from Chennai. I have one doubt for rectify the Embed color Profile problem, that's is how can i judges whether the file had Embed Color Profile or not. anyone solve this problem.
Thanks in Advance.
-yajiv

I used another profiles name, because I dont have the old one installed anymore, Youll have to be exact about the letters though.
And from a prepress-standpoint Id like to point out that removing the profile as opposed to »Convert to Profile« seems a peculiar practice, though of course Your reasons for doing so may be valid indeed.
You could try:
var myDocument = app.activeDocument;
if (myDocument.colorProfileName == "U.S. Web Coated (SWOP) v2") {
// =======================================================
var idassignProfile = stringIDToTypeID( "assignProfile" );
var desc2 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
var ref1 = new ActionReference();
var idDcmn = charIDToTypeID( "Dcmn" );
var idOrdn = charIDToTypeID( "Ordn" );
var idTrgt = charIDToTypeID( "Trgt" );
ref1.putEnumerated( idDcmn, idOrdn, idTrgt );
desc2.putReference( idnull, ref1 );
var idmanage = stringIDToTypeID( "manage" );
desc2.putBoolean( idmanage, false );
executeAction( idassignProfile, desc2, DialogModes.NO );
else {

I have a new iMac but having problems installing final cut express 4 from old macbook pro ?

i have a new iMac but having problems installing final cut express 4 from old macbook pro ?

FCE was discontinued nearly 3 years ago and is no longer supported.
I don't know whether it's possible to install it on Mavericks and if you do it may not perform properly.
Final Cut pro X and iMovie are the only Apple apps that are supported.

IMAC COLOR FILTER PROBLEMS (ColorSync)

Similar Messages

Maybe you are looking for