IMAC connected to Mbox 2 - USB LED doesn't light up - Please help!
Pretty new to all of this. I just bought a new IMAC intel core duo and Mbox 2. I connected the Mbox 2 to the USB port and the LED didn't light up.. I disconnected it and tried again...same thing. I restarted the IMAC and connected the Mbox 2 again...still nothing. I went to system preferences and clicked on the Mbox 2 and it said "You cannot open digidesign Mbox 2 preferences pane on this computer. Contact the developerof this software for a newer version"....needless to say I'm lost now. Can someone point me in the right direction???
IMAC Mac OS X (10.4)
Try to use another cable and check if the internet led will light up. Try connecting the modem to the Ethernet ports as well for isolation. If you will get the same thing, do a hard reset on the router – push and hold the reset button on the router using a pin or a paper clip for 30 seconds then power the router off for another 30 seconds. Check the lights then. You can also do a loopback test – connect one end of the Ethernet cable to the internet port and the other end to any of the Ethernet ports. Check then if both ports will light up. If the internet led will still not light up then it’s possible that the hardware is defective.
Similar Messages
-
My FP-TC-120's ready LED doesn't light up suddenly
Hi,
My FP-TC-120's ready LED doesn't light up suddenly, and before that the situation of erratic reading happened sometimes, does anybody know the possible reason? what am I supposed to do now? my fieldpoint controller is FP-2000, and the other three modules are AI-110, AO-200 and RLY-422.
I expect any reply for this problem.
thank you!
yiHi Yi,
I searched the community and found a good thread on this, please take a look at it.
Thanks and have a great day. -
my ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!
Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W. -
i just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!
Is the status light green?
Your Airport device may be in Bridge Mode.
Airport Utility 6:
Open Airport Utility, select the Airport Express and click Edit. Navigate to the Network tab and change Router Mode to DHCP and NAT. Then click Update on the bottom right.
Airport Utility 5:
Open Airport Utility and click Manual Setup. Navigate to the Internet icon and change Connection Sharing to Share a Public IP Address. Then click Update on the bottom right. -
I can't connect my ipad air to my computer. It comes up with the message 'connection has timed out'. I use windows vista. Please help, I want my music catalogue on my ipad. Thanks
Have you updated your iTunes? iOS7 requires at least iTunes 11.
-
I restored my ipod and now the Nike app is crashing on me. I've tried turning it off and on again, but it still doesn't work. Please help.
Hi,
Have you tried a Reset...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 15 - 20 Seconds...
Release the Buttons... -
[Acrobat X Standard] The tool box doesn't work. Please help!
[Acrobat X Standard] The tool box doesn't work. Please help!
I have a Acrobat X Standard.
When I open the documents, I can't click the tool box. but when I don't open the documents, I can use the tool box.
To solve the problem,
1. reinstall the menu.
2. reboot the computer.
But, It still didn't work.
Plz help!!Was it AA X Std that you had these options in (sorry, I only have Pro)? If it was the trial (that is Pro), it may be that Std does not have to feature. Under XI at the Adobe site, there is a comparison of features between Std and Pro that might give you a hint.
There is also an option to turn on or hide many tools. For me there is a small icon just above the tools...comment titles. If you select that it give a list of tools you can display. Often, several are not displayed by default. How you lost them is another things, but it is getting them that is the basic question. -
I recently restarted my phone and everything works besides iMessage, I have my number put in yet it keeps on saying "waiting for activation" it won't turn on now. I want to connect it to my number and not my email. Please help.
If you have difficulty activating FaceTime or iMessage - Apple Support
-
I cannot open the new email icon for 10.6.8 including the latest security update. My old "Stamp" icon email won't let me in either indicating that the new OS version doesn't work. Please help. I have spend over 4 hours installing and reinstalling updates, etc. and I don't know where to go from here.....
Mac OS X v10.6: Mail.app won’t open, or "You can't use this version of Mail…" alert after installing Security Update 2012-004:
http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US
Fellow user Grant Bennet-Alder offers this solution:
Some users have reported this problem if the Mail Application has been moved out of the top-level /Applications folder, or duplicated in another location.
When the Security Update is done, the old version of Mail is disabled.
The solution has been to:
1) make certain Mail is in the /Applications folder
2) There is no other copy anywhere else.
3) Once steps 1 and 2 have been done, Manually download and re-apply the Security Update (2012-004) by hand.
Security Update 2012-004 (Snow Leopard)
If the Mail.app has been LOST, it can be re-installed by applying the 10.6.8 version 1.1 combo update. But this update is quite large and it is usually not necessary:
Mac OS X 10.6.8 Update Combo v1.1 -
I updated my ipad mini to ios7 and after that the restrictions have been turned on automatically. It was off before the update and I din do after either. I tried 1234 but it doesn't work. Please help me.
1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working? -
Hello, Please Help!
When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync.
Please Help!!!
EdgilMake sure your easy setup has the correct frame rate for your sequence. Seems crazy but somehow or other fcp assigns a frame rate to audio files. I've found this can sometimes be tricky to get right. Here's what I've done to force the issue. Make sure the easy setup frame rate reflects that of the target sequence in fcp. Create a new project. import the audio in the new project. And then copy the clip from the new project to your main project.
Good luck -
My iPhone 4 won't switch off. When I press the power button at the top, the phone doesn't respond. Please help!
Try a reset
-
My Linksys E1500 is Dead? Internet LED Doesn't Light Up
My problem is that when I connect the internet (yellow) cable to the linksys router, the LED notification in my modem turns off. I got internet connection if I won't use the router. But I needed the router, but it is not usable already. In my theory, I think there are parts inside the router that have been damaged. Because it seems that the internet cable is not plugged, even though I plugged it already. I've done many things already but still it didn't work. Can you please help me?
Try to use another cable and check if the internet led will light up. Try connecting the modem to the Ethernet ports as well for isolation. If you will get the same thing, do a hard reset on the router – push and hold the reset button on the router using a pin or a paper clip for 30 seconds then power the router off for another 30 seconds. Check the lights then. You can also do a loopback test – connect one end of the Ethernet cable to the internet port and the other end to any of the Ethernet ports. Check then if both ports will light up. If the internet led will still not light up then it’s possible that the hardware is defective.
-
Invariable on eof them will connect and the other one doesn;t. I have to constantly disconnect eth router and re-connect it for the computers to pick it up. I also sometimes get an error message that I am sharing the same IP address and i don't know how to change it. Please help!
Open the Network preference pane in System Preferences on each Mac. If necessary, click the lock icon in the lower left corner of the window and authenticate to unlock the preference pane. Select the wireless connection from the list on the left. Click the "Advanced" button, and in the sheet that opens, select the "TCP/IP" tab. From the popup menu labeled "Configure IPv4," select "Using DHCP." Click OK to close the sheet, then click "Apply." Try again.
Maybe you are looking for
-
Page designer show small view when using page template and cannot be run
Dear Experts, I need to make some page templates. I have build 2 simple page templates, let say template0 & template1 which template1 using template0. It show no any problem until I close my Jdeveloper & reopen it. When I reopen template1, it show so
-
Why can't i install java on os 10.7, under install it says error something about java script
why can't i install java on os 10.7, under install it says error something about java script
-
Mac Book Pro or Mac AIR for programming?
I want to buy apple notebook, required configuration 13.3 screen and ci5 processor. My main wor related to note book is developing software(Jav /Python) and running applications developed in Microsoft Visual Studio applications. please suggest me the
-
Gurus, Can you advise if you have used EDI and IDocs to receive messages into GTS. Requirement is to update GTS customs declaration based on this IDoc data. Is there a standard BAPI or function module that can for example post CUSRES or CUSDEC mess
-
Fact Table allows duplicate records
Is Fact Table allows duplicate records?