IMac connects to the Internet, but software will not.

I am operating on Leopard 10.5.1 - my computer connects successfully via Airport wireless to the internet, but Safari, iTunes and Mail all are unable to connect. I have read throu previous discussions and done the following: deleted and recreated airport listing in network prefences, deleted system configuration preferences, rebooted router and restarted computer several times, spoken with Verizon tech at great length while working through their diagnostic process, and none of these efforts have been succsessful.
Any additional help would be greatly appreciated.
Thank you.

Actually Airport>Ethernet ID & Ethernet>Ethernet ID will be different.
The one FIOS router I'm looking at from Verizon does support Access control, not sure if you have that set on or or not.
WAN Ethernet Light
The WAN Ethernet light illuminates when the FiOS Router is connected to the
Internet via Ethernet. If flashing, data traffic is passing across the port.
WAN Coax Light
The WAN Coax light glows steadily or flashes when the FiOS Router is connected
to the Internet via coaxial cable.
Internet Light
When the Internet light glows steadily green, the FiOS Router is connected
to the ISP (Internet Service Provider). If it glows amber, there is a physical
connection to the ONT (Optical Network Terminator), but authentication has not
taken place (i.e., no IP address is present).
LAN Ethernet Lights (1, 2, 3, 4)
The LAN Ethernet lights illuminate when the FiOS Router is connected to a local
network via one or more of its Ethernet ports. If flashing, data traffic is passing
across the port(s).
LAN Coax Light
The LAN Coax light glows steadily or flashes when the FiOS Router is connected
to a local network via its Coax port.
USB Light
The USB light illuminates when the FiOS Router is connected to a device via a
USB cable.
Wireless Light
The Wireless light illuminates when the FiOS Router’s wireless access point is
turned on. If flashing, data traffic is passing across the wireless connection.
http://support.actiontec.com/doc_files/MI424WR_Rev._E_User_Manual_20.9.0-&-20.8. 0_v3_GPL.pdf
Can you connect an Ethernet cable & try the 192.168.1.1 IP for setup?

Similar Messages

  • Hi, i can connect to the internet but mail will not download and i cannot open webpage ?? please help

    hi, i can connect to the internet but mail will not download and i cannot open a webpage?? any ideas

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • HT1567 I am connected to the internet, but itunes will not connect, it does stated that I have downloaded and installedl, I don't know what to do.  Please help.

    I downloaded and installed itunes, but itunes will not connect to ;internet (I do have internet.  I don't know what too do, can you help?

    I'm having the exact same issue. I'm connected to the VPN, but I can't mount or otherwise connect to the shared drive. Did you ever resolve this?

  • My 16gb 5th gen iPod Touch says it is connected to the internet, but it is not. What do I do?

    Please help me.  I have iOs 7. I tried going on safari but I says I'm not connected to the internet. I went to settings>wi-fi and then my router is displayed under the switch to turn on and off the wi-fi. Here is a picture : (It's in French)
    What do I do to be able to use the internet?
    Thanks

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Hi, my Macbook says its connected to the internet, but it's not working.  It's about 2 years old and has been fine up until now.  Its the same internet provider and I have a work PC laptop that is connecting fine.  Any help greatly appreciated.  Liz

    Hi,
    My MacBook Pro won't connect to the internet, although it says it is connected.  The laptop is about 2 years old and up until now has worked fine.  My work PC laptop is connecting to the internet fine so I know it can't be the connection.   I've checked for Adware/Malware (just in case) via safemac and that all seems fine.
    I'm running OSX 10.8.5.
    Any advice would be greatly appreciated.
    Many thanks
    Liz

    Believe it or not, that article helped me find a temporary solution. After reading it I realized that the problem did have to do with my DNS settings. I had taken the DNS settings that my ISP gives me when I dial up and plugged them into the configuration for my AirPort card. This apparently caused a problem because, although my wireless network is always on, it's not always connected to the internet. So those DNS settings were invalid most of the time.
    I found that as long as I leave the area for DNS servers blank, the computer logs in normally. This further confirms my suspicion that something was trying to access the internet at login. I guess as long as I don't specify any DNS servers, the computer realizes it doesn't have an internet connection through my AirPort card.
    So I just created two network locations: one for when my network is connected to the internet and one for when it isn't. In the first, I kept my original DNS settings because they work as long as I have an internet connection. In the second I did not specify any DNS servers. This seems to work fine, but I'd still like to know what is trying to access the internet at login. I've disabled the automatic update feature in all my programs that have it, but that doesn't seem to help the slowdown at login. Does anyone know how I could figure out what program is trying to access the internet?

  • We just  bought an iMac.  We have a new HP printer that we've been using wirelessly with our windows based computers with no problem.  the iMac can find the printer, but it will not set up.  Any ideas?

    Our iMac can find the wireless printer, but it will not set it up.  Any ideas?

    I have to disagree with BGreg about downloading the driver from HP.com. I would recommend using Apple's instructions in
    http://support.apple.com/kb/HT4670?viewlocale=en_US&locale=en_US
    specifically the section on How to Add a Printer then check for the section on Wi-Fi printers.

  • Mac will not connect to the Internet but iPhone will.

    How can I be sat next to my router and my iPhone is connected yet my mac Air is having none of it? Tried the diagnostics and rebooting both Mac and router with no luck?

    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US

  • My iPhone will connect to the wifi but MacBook will not

    Dear Apple community,
    I apologize in advance if I missed something obvious such as restarting the device etc.
    Alright. So my iPhone will connect to my home wifi perfectly fine. The router is located a floor above me directly. However, my MacBook Air can locate the wifi source but won't connect to it. It just suggests running a diagnostics
    I was not having this problem around three days ago but now it refuses to work. If I go right next to the router the wifi is fine though
    Thank you in advance!

    Problem solved! My apologies!

  • When trying to install downloaded software I am prompted to connect to the internet but I already am connected and the software will not install.

    When trying to install downloaded software I am prompted to connect to the internet but I am already connected. This also occurs when trying to install an Adobe update.

    A cable modem always needs a complete reset whenever you change the device that it is connected to.
    To get your Internet signal restored, it will require at least one major step including the reset of your modem and complete network power cycle.
    If that is not successful, the second major step is to reset the AirPort Extrreme back to factory defaults and then combine the steps above again.
    Try this first:
    Push the reset button on the cable modem (if present) and pull the internal batter (if easily accessible)  then power off the modem
    Power off everything else on your network....all devices....order is not important
    Wait at least 20 minutes...longer will not hurt
    Make sure that the Ethernet cable from the modem is connected to the WAN port (circle of dots or world icon) on the AirPort Extreme
    Re-install the modem battery if it was pulled in the step above
    Power up the modem and let it run for 4-5 minutes by itself
    Power up the AirPort Extreme and let it run for 4-5 minutes
    Power up each other network device one at a time about a minute apart until everything is powered back up
    Check the network for proper operation

  • When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

    When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

    I get a problem like yours. I have a mac mini with 2 hdds the server and hd2 I installed windows 7 and the windows works fine. except it will not allow me to get on the net.  I get error 651.  I can boot back to lion and the internet connection works. I googled and error 651 does seem to show up.  I would like  a work around.

  • I have an iMac that I am running OSX 10.8.3 on.  I keep trying to install 10.8.4 but it will not install.  I tried updating and installing several times and it restarts the computer but it will not install the software.  My machine is about 8 months old.

    I have an iMac that I am running OSX 10.8.3 on.  I keep trying to install 10.8.4 but it will not install.  I tried updating and installing several times and it restarts the computer but it will not install the software.  My machine is about 8 months old so, it's in the newish range.  HELP!

    Sometimes the App Store version doesn't work correctly. In this case, install 10.8.4 with the Combo version > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US
    The Combo installer is the safest way to update OS X, and it allows you to update more than one computer with a single download

  • We live in motel but my iMac is not connecting with the internet but my cousin has hp laptop that works perfectly fine in my room. So can you help me with this situation?

    We live in motel but my iMac is not connecting with the internet but my cousin has hp laptop that works perfectly fine in my room. So can you help me with this situation?

    Joining an encrypted WEP or WPA Wi-Fi network

  • HT201263 when i follow the steps it does it but when it gets to itunes it says 'iTunes could not contact the iPhone software update server because you are not connected to the internet' but i am connected to the internet ..?

    when i follow the steps it does it but when it gets to itunes it says 'iTunes could not contact the iPhone software update server because you are not connected to the internet' but i am connected to the internet ..?

    Were you definitely connected to the internet at the time? If you don't have iOS 5 on your iPhone then the only way to update it would be via iTunes, once updated to the latest version of iOS you'll be able to update your iPhone without connecting to iTunes "over-the-air".
    Before updating however it goes without saying to Backup your iPhone, this should happen by default upon connecting your iPhone to iTunes.
    Regards,
    Steve

  • I was having issues with firefox so I upgraded to firefox 4. I am connected to the internet but when I open firefox or even internet explorer it says Unable to connect problem loading page. Nothing will pull up!!! No help link or anything!!?

    I was having issues with firefox so I upgraded to firefox 4. I am connected to the internet but when I open firefox or even internet explorer it says Unable to connect problem loading page. Nothing will pull up!!!

    I don't know if you are still having the issue but if you are have you contacted your ISP? It sounds to me like it's more of a connectivity issue than a browser problem. I've dealt with similar things several times and in both cases it was something with the modem or an ISP setting.
    I'm also wondering if it could be a Wi-Fi issue. Can you log in to your router? (It varies by brand but you would go to a site such as http://192.168.10.1. That is for Trendnet. The information for yours should be in the documentation that came with it.)
    You should be able to get the router log in page to come up even if you can't connect to any websites. (Provided the network is set up correctly.)
    I also would double check your connection settings (if you're connecting over Wi-Fi) or your ethernet connection. (If you're connected directly to the modem and router.)
    Hopefully one of these suggestions will be helpful.

  • TS3798 I have a new Ipad, it says I am connected to the internet but will not load . When attempting to go to a web sight, the green bar goes 1/2 inch then nothing

    I have a new ipad, it says I am connected to the internet but will not work. When I attempt to go to a web sight the green bar moves 1/2 inch and nothing.
    I have a used linksys router that I got from work. I tried connecting with a older ipad and every thing works correctly. any ideas?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for

  • E-mail asking for account verification

    I had got a few e-mails that say "Final Warning update!" Is this legit!? This is the e-mail I got: Body Account Verification Talk21 has discovered series of illegal attempts on your account from a bad Ip Location and will shut your account as it has

  • I can't hear the person I'm calling (they can hear...

    Nokia Lumia 925 have cyan update , 10 months old. Since the yesterday I can no longer hear the person I'm trying to talk to. They can hear me. All other sound functions seem to be OK. Any ideas?

  • Number of characters in a dynamic form/list/mysql table

    Hi all, I mentioned this in a previous post but wanted to give it a home of it's own.  I have a dynamic list, updated and edited by a dynamic form.  However, with one of the columns I can only fit about 50% / 4 lines of text in.  I am unsure whether

  • Internet speeds very slow.

    Found web browsing very slow this morning. Checked my World of Warcraft account and that was also running slow. Did a speed test and got these results. Download  Speed 0.42 Mbps 0 Mbps 4 Mbps Max Achievable Speed  Download speedachieved during the te

  • Apply all ArchiveLogs manually to the Standby Database

    Hi, we can create a Physical Standby Database on Standard Edition, but we have to transfer and apply all ArchiveLogs manually to the Standby Database. How can we do this ? many thanks