IMac could not 'find' base station. (Previously working)
Today I found that my iMac (20" Core 2 Duo with built in Airport card) was not talking to my Airport Extreme 802.11n base station.
The base station had a green light and was talking OK with another machine upstairs so there was nothing wrong with the internet connection (or the cable broadband router) or the base station.
I re-booted the iMac but still no connection. I scanned for base stations from the Airport utility. Nothing found.
So I did the factory reset on the base station and scanned again and this time it 'found' it. Set up the network (passwords etc) from scratch and everthing working OK.
Except now it would not talk to the PC upstairs. Checked on the Airport utility to see what channel was in use and found it had defaulted to 13. No problem. I changed it to 6 (our normal channel) and waited for the base station to reboot. Base station re-booted fine (green light) and PC upstairs connected. Good.
BUT. Now could not find base station from iMac again!
So I went through the whole process again, once to make sure the fault was repeatable and once again to set a new channel to 10.
Now everything works great again. Everything talking to everything else (including iMac and upstairs PC) but using channel 10 now instead of the old channel 6.
I dont know why this fault should suddenly happen. Why a channel that has had no problems since install (months ago) should suddenly not work.
The only thing different was the big Software Security download from Apple yesterday morning. But the network was OK for hours after that and there was no Airport software upgrades today (that I know of) and the base station is still on version 7.1.1.
(One other strange thing I noticed. When running iStumbler after all this, I could see my network and the usual three other nearby networks near my home BUT they were all also now on channel 10 or 11 whereas they had all been on channel 6 previously just like mine had been. Weird.)
I am in the UK in case things are different where you are.
I would be interested to know if this has happened to you at some time especially in the last day or two.
Thanks
I don't know. I just reset the airport base station
(before your post) and erased all network stuff to
start from scratch.
Should it use PPoE?
That depends on your ISP. It would be in your ISP documentation.
Should AppleTalk be active?
TCP/IP and AFP (the replacement for AppleTalk) are required.
Similar Messages
-
Help! Airport Utility not finding base station
Hi. I just bought a used Airport Extreme base station on ebay. It's the 4th generation model -- A1354, also known as MC340LL/A. The owner claimed it's in mint condition and working fine.
I got it today. It looks like it's in good shape and I plugged my Ethernet cable into it, and the base station's light turned green as it's supposed to.
I am using an IMac (circa late 2007) running Mavericks.
The problem I'm having is that Airport Utility is not finding the base station. I don't know what's going wrong and I don't know how to solve the problem. I've reset the base station and I've unplugged it and plugged it back in with no luck.
Last year, I used an older airport extreme base station, one of the saucer shaped ones, and it would show up when I ran Airport Utility (I had to use an older version of the Aiport Utility app). I decided to upgrade to a newer base station because the saucer-shaped one kept dropping its wifi network.
Anyway, I'm wondering if anyone has any ideas about why Aiport Utility is not noticing the base station. The manual that came with the base station didn't instruct on how to solve such a problem.
Thanks.
MirskyOkay, feel free to disregard. I reset the Airport Extreme a second time and that seemed to do the trick.
-
I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4). When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils". Anyone know what the problem is and how to fix? Thanks.
https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…
-
Hi all , I have an exchange 2010 SP 2 environment with 2 sites , the remote site FL free busy has NEVER worked and I get this error on the remote site , is this related ?
thanks
Log Name: Application
Source: System.ServiceModel 3.0.0.0
Date: :
Event ID: 3
Task Category: WebHost
Level: Error
Keywords: Classic
User: SYSTEM
Computer: FL-CAS1.WOMBAT.LOCAL
free bust works from WITHIN the remote (FL ) site , but NEVER to the main (WASH) site , it has Never worked ,I am thing that this error is related
thanks I have no idea how to fix
Description:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/17256489
Exception: System.ServiceModel.ServiceActivationException:
The service '/EWS/exchange.asmx' cannot be activated due to an exception during compilation. The exception message is: Could not find a base address that matches scheme http for the endpoint with binding CustomBinding. Registered base address schemes
are [https].. ---> System.InvalidOperationException:
Could not find a base address that matches scheme http for the endpoint with binding
++++Hi
This issue could be with corruption in Autodiscover and web services virtual directory
Replace Web.config file for Autodiscover and web services virtual directory from the other working site
Delete and Recreate Autodiscover and web services virtual directory
Do this only on the affected site
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP) -
A few weeks ago my computer had lost the connection to the wireless internet. I set it up again and was able to connect to the internet, however since then I've been receiving an error message "Could not find a PPPoE Server." I went back into Preferences and unchecked the PPPoE server option but the error message still pops up.
Any idea how to fix it?In the Network pane of System Prefences, do you have duplicate services on the left column? When you "set it up again", you might have duplicated a service and both (the good working one and the previous that lost connection) might be trying to connect at the same time.
-
I have an orchestration published as a web service. It was working fine on our test environment, we deployed to production, and now getting this error. The website wouldn't go in the BizTalk MSI, so we copied the files. We reset the Authentication
to match the test system (we are using Basic Auth).
When we try to browse the webservice in the browser, it prompt for userid/password, we enter it, then it gives the following error.
I'm not even sure what it means by "base address", if URL was https://prod.mydomain.com/myapp/myservice.svc, would https://prod.mydomain.com be the based address? In the test environment, the URL is https://test.mydomain.com/myapp/myservice.svc.
In both environments, we have a customer calling this webservice.
Also, I don't know what it means "scheme http". We are using https:... on the URL.
I'm thinking this is either security related, something to do with the app pool being different, or maybe something to do with bindings.
Thanks,
Neal Walter
http://MyLifeIsMyMessage.net
Web.config:
<services>
<!-- Note: the service name must match the configuration name for the service implementation. -->
<service name="Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkServiceInstance" behaviorConfiguration="ServiceBehaviorConfiguration">
<endpoint name="HttpMexEndpoint" address="mex" binding="mexHttpBinding" bindingConfiguration="" contract="IMetadataExchange" />
<!--<endpoint name="HttpsMexEndpoint" address="mex" binding="mexHttpsBinding" bindingConfiguration="" contract="IMetadataExchange" />-->
</service>
</services>
</system.serviceModel>
<system.webServer>
<security>
<authorization>
<remove users="*" roles="" verbs="" />
<add accessType="Allow" users="myCustomer" />
</authorization>
</security>
</system.webServer>
Server Error in '/eSecuritelIn' Application.
Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered
base address schemes are [https].
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
code. Exception Details: System.InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https].
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using
the exception stack trace below.
Stack Trace:
[InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes
are [https].]
System.ServiceModel.ServiceHostBase.MakeAbsoluteUri(Uri relativeOrAbsoluteUri, Binding binding, UriSchemeKeyedCollection baseAddresses) +16582113
System.ServiceModel.Description.ConfigLoader.LoadServiceDescription(ServiceHostBase host, ServiceDescription description, ServiceElement serviceElement, Action`1
addBaseAddress) +1082
System.ServiceModel.ServiceHostBase.ApplyConfiguration() +156
System.ServiceModel.ServiceHostBase.InitializeDescription(UriSchemeKeyedCollection baseAddresses) +215
System.ServiceModel.ServiceHost..ctor(Object singletonInstance, Uri[] baseAddresses) +400
Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHost`3..ctor(IsolatedReceiverType isolatedReceiver, BizTalkServiceInstance serviceInstance, Uri[] baseAddresses)
+36
Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +533
System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1413
System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1172
[ServiceActivationException: The service '/eSecuritelIn/eSecuritelIn_OrchPublished_RepairEquipmentService.svc' cannot be activated due to an exception during compilation.
The exception message is: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https]..]
System.Runtime.AsyncResult.End(IAsyncResult result) +901424
System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +178702
System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET
Version:4.0.30319.272When you want to migrate Web Applications from one environment to other there are multiple ways to achieve it.
1) Migrate in MSI- Export MSI and select the option for your Web Application, however I don't recommend this option
2) Is to browse the folder for Web Application(Right click on web app and browse). Copy this folder(normally within inetpub folder) and take it to the inetpub folder of other environment. Later from the IISManager create application.
Are you not using the same Binding file?
Check you web.config file and see if the endpoint is configured for mexHTTpBinding.
Old: binding="mexHttpBinding"
New: binding="mexHttpsBinding"
web.config snippet:
<services>
<service behaviorConfiguration="ServiceBehavior" name="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService">
<endpoint behaviorConfiguration="AspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="webBinding"
contract="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService" />
<endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange" />
</service>
Also look into the below article- How to fix: "Could not find a base
address that matches scheme http for the endpoint with binding WebHttpBinding" Errors
Moving to https = Could not find a base address that matches scheme
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful. -
Getting a "Could not find a base address that matches scheme net.tcp"
I've written several WCF services which use HTTP (and its variants). Now I'm trying to learn how to write a WCF service which will use TCP. I'm using Andrew Troelsen's book, "Pro C# 2008 and the .NET 3.5 Platform" as a guide (chapter 25). I've asked questions related to this before on a much more complicated WCF service, so I decided to write a simple WCF service to learn how to do it, rather than work on my more complicated WCF service. Coincidentally I chose the same routine as Troelsen did in his book, although in my case I called the WCF service SimpleAdd.
Anyway, after writing the WCF service, I then wrote the Windows Service to host it. I then installed it, and the installation went fine. When I tried to run the service, the service started but then immediately stopped. I checked the event log and found the following message in it:
"Service cannot be started. System.InvalidOperationException: Could not find a base address that matches scheme net.tcp for the endpoint with binding MetadataExchangeTcpBinding. Registered base address schemes are [http]."
Here's the interface code for my SimpleAdd:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Runtime.Serialization;
using System.ServiceModel;
using System.Text;
namespace SimpleAdd
// NOTE: If you change the interface name "IService" here, you must also update the reference to "IService" in App.config.
[ServiceContract]
public interface IService
[OperationContract]
int Add(int FirstNumber, int SecondNumber);
Here's the code for the implementation (I'm leaving out the using statements):
namespace SimpleAdd
// NOTE: If you change the class name "Service" here, you must also update the reference to "Service" in App.config.
public class Service : IService
#region IService Members
int IService.Add(int FirstNumber, int SecondNumber)
return (FirstNumber + SecondNumber);
#endregion
And here's the App.Config file for the service:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<system.web>
<compilation debug="true" />
</system.web>
<!-- When deploying the service library project, the content of the config file must be added to the host's
app.config file. System.Configuration does not support config files for libraries. -->
<system.serviceModel>
<services>
<service behaviorConfiguration="SimpleAdd.ServiceBehavior" name="SimpleAdd.Service">
<clear />
<endpoint binding="wsHttpBinding" contract="SimpleAdd.IService"
listenUriMode="Explicit">
<identity>
<dns value="localhost" />
<certificateReference storeName="My" storeLocation="LocalMachine"
x509FindType="FindBySubjectDistinguishedName" />
</identity>
</endpoint>
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"
listenUriMode="Explicit">
<identity>
<!--
<certificateReference storeName="My" storeLocation="LocalMachine"
x509FindType="FindBySubjectDistinguishedName" />
-->
</identity>
</endpoint>
<endpoint address="net.tcp://localhost/SimpleAdd/" binding="netTcpBinding"
bindingConfiguration="" contract="SimpleAdd.IService" />
<host>
<baseAddresses>
<add baseAddress="http://localhost:8731/Design_Time_Addresses/SimpleAdd/Service/" />
</baseAddresses>
</host>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="SimpleAdd.ServiceBehavior">
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="false" />
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
</configuration>
I don't think it will matter much, because I believe the problem probably lies in the App.config file for the Windows service, but just in case, here's the code for the AddWinService (without the using statements):
namespace WindowsAddService
public partial class AddWinService : ServiceBase
//A member variable of type ServiceHost. (I'm using the "Pro C# 2008" book as reference for this.)
private ServiceHost myHost;
public AddWinService()
InitializeComponent();
protected override void OnStart(string[] args)
//just to be really safe
if (myHost != null)
myHost.Close();
myHost = null;
//create the host
myHost = new ServiceHost(typeof(SimpleAdd.Service)); //I've included the class from SimpleAdd, which isn't in the book!!!
//open the host
myHost.Open();
protected override void OnStop()
//shut down the host
if (myHost != null)
myHost.Close();
And lastly, here is the App.Config file from my AddWinService:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<system.serviceModel>
<client>
<endpoint address="net.tcp://localhost/SimpleAdd"
binding="netTcpBinding"
contract="SimpleAdd.IService"
name="netTcpBinding_IService" />
</client>
<services>
<service name="SimpleAdd.Service"
behaviorConfiguration="SimpleAddMEXBehavior">
<!-- Enable the MEX endpoint -->
<endpoint address="mex"
binding="mexTcpBinding"
contract="IMetadataExchange" />
<host>
<!-- Need to add this so MEX knows the address of our service. -->
<baseAddresses>
<add baseAddress="http://localhost:8731/Design_Time_Addresses/SimpleAdd/Service/" />
</baseAddresses>
</host>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="SimpleAddMEXBehavior">
<serviceMetadata httpGetEnabled="true" />
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
</configuration>
So, where have I gone wrong?
RodHello Richard,
Well, I've tried making the change to the MEX point for net.tcp, but now when I try to start the service I get the following error in the event log:
Service cannot be started. System.InvalidOperationException: Service 'SimpleAdd.Service' has zero application (non-infrastructure) endpoints. This might be because no configuration file was found for your application, or because no service element matching the service name could be found in the configuration file, or because no endpoints were defined in the service element.
I am sure the problem lies with what I've put into the app.config file. My app.config file now looks like this:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<system.serviceModel>
<client>
<endpoint address=""
binding="netTcpBinding"
contract="SimpleAdd.IService"
name="netTcpBinding_IService" />
</client>
<services>
<service name="SimpleAdd.Service"
behaviorConfiguration="SimpleAddMEXBehavior">
<!-- Enable the MEX endpoint -->
<endpoint address="mex"
binding="mexTcpBinding"
contract="IMetadataExchange" />
<host>
<!-- Need to add this so MEX knows the address of our service. -->
<baseAddresses>
<add baseAddress="net.tcp://localhost/SimpleAdd" />
</baseAddresses>
</host>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="SimpleAddMEXBehavior">
<serviceMetadata httpGetEnabled="false" />
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
</configuration>
I've also tried using this for the <client> tag under <system.serviceModel>:
<client>
<endpoint address="net.tcp://localhost/SimpleAdd"
binding="netTcpBinding"
contract="SimpleAdd.IService"
name="netTcpBinding_IService" />
</client>
But that gives me the same error in the event log.
So, what have I done wrong now?
Rod -
Why have all 3 airport express base stations stopped working, other users are on ipads and BT have checked and improved line but I still have an intermittent/no connection?
You must tell us the whole setup.. what is the main router?? How are the express connected to each other?
On ipad it works ok?? But you are on a computer?? MBP early 2011 running Lion?? That doesn't work.. even if you are right next to the main router??
Plugged in by ethernet does it work??
Have you installed a wireless diagnostic program.. ?? Actually Lion has one installed but hidden I believe.
Later version bought it to the surface.
About Wireless Diagnostics
If you do run Lion please install the 5.6 airport utility as it will give you loads more info on how the units are connected.. and link speeds for extend wireless.
How to load 5.6 into later Lion & ML
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so. -
I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks
Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden -
i was given a macbook 5.1 by my mom, being nice, she erased everything on it, but then could not find the original start up disc. i called apple and had the serial number and said that leopard 10.5 was the operating system that orginally came with it, so i bought it. when i got it,i turned on computer, put in dvd, and immediately shut it off, then turned it back on while pressing letter c. (they told me to do this) i can hear the disc turning but alls i get is blank screen then it shuts down, and restarts. nothing ever shows up on the screen. did i get a wrong disc? should there be something different than just the mac os x leopard 10.5 to get this computer to work again?? thanks for your help!
It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium -
HT1218 Airport Extreme base station is working, but not visible on network?
My Airport Extreme base station is working: all devices are able to connect to the internet, but Airport Utility shows no connection. Only one computer even shows the device-- greyed out-- saying "Device not Found." The airport utility shows version 6.2; OS X version 10.8.3. How do I update the base station to version 7 if the device can't be found? And how do the devices connect to the internet without "seeing" the device?
Thanks for checking. This model should be visible in AirPort Utility in Mountain Lion.
If you have not already done so, I suggest that you perform a complete power cycle on the entire network as folllows:
Power off every network device....in any order you want
Wait a minute or two
Start the modem first, and let it run a few minutes by itself
Start the AirPort Extreme next, the same way
Continue starting devices one at a time about a minute apart until everything is powered back up
Check the network again using AirPort Utility
You can also temporarily connect an Ethernet cable from your Mac to one of the LAN <-> ports on the AirPort Extreme to see if a connection is established that way.
If still no luck, try another Mac if you one handy. After that, all that I can suggest is that you perform a Factory Default Reset on the AirPort Extreme and configure it again. -
Unable to install Netgear XE102 on my iMac. Checked Netgear website and could not find a setup.exe file for Mac.
That means either no software needs to be installed on a Mac or the product is incompatible with Macs. Contact NetGear tech support for help.
-
I can't seem to reinstall OS X Mavericks after trying to restore my IMac to factory settings. It said, "Could not find installation information for this machine."
Recovery Partition – Recreate Without Reinstalling
Recovery Partition – Recreate Without Reinstalling (Requires Installer) -
Everytime I open Firefox, it shows me a error: "...Firefox could not find your Proxy configuration..." The thing is I'm not using Proxy. Then I go to settings windows, network, put No Proxy, and then everyting works ok. BUT always I open Firefox, it happens again. Help me , Please
Everytime I open Firefox, settings in Network appear: Manual Proxy and shows me a ip number and portSee:
* http://kb.mozillazine.org/Preferences_not_saved -
Could not find an installed JDK, SCM Java Tools may not work until registry
Hello all,
I've downloaded the latest full version of Designer (10.1.2.3), but getting installation error: Could not find an installed JDK, SCM Java Tools may not work until registry
Any solution?3. install the Designer 10.1.2.3 patch to the Developer suite home.When I try to do this at C:\oracle\product\Ora10gDSR2, I get a message OUI-10137: An Oracle Home with name OUIHome already exits at C:\OraHome (a directory that doesn't exist) please specify another name for Oracle Home.
I don't want to just specify another name because cleaning up these faulty installations requires deleting registry keys, etc, since the deinstall does't really remove everything sufficiently to start with a clean slate.
I also got the Java JDK message because the JDK 5 is no longer being put straight onto the C drive, it is buried in C:\Sun\SDK\jdk, so some java programs have to be pointed to it. The Oracle installer doesn't provide this option.
Also, Michael, your post, "Re: Designer 10.1.2.3 on windows Xp Posted: Oct 20, 2007 7:05 AM in response to: mmehdi" is full of unreadable characters and question marks. Maybe I don't have a font you are using. There are also references to a zip file and a Word document that aren't there.
Anyway, thanks for all your time and effort,
Edward
Maybe you are looking for
-
Using exp imp on 11i apps database
Hi, Does anyone have experience in using exp and imp utility on 11i apps database? Is there any special method to achieve this. I want to do a full export and do an import. Do we get any performance benefits if we do this? Regards, SA
-
Hello, I need a simple link I can click to update to Firefox version 31. Currently running 30 and having security issue. I run XP and have never had a problem in 4 years using Firefox until now. Thanks.
-
My macbook air keeps restarting?
My macbook air (2012) keeps restarting. I got the logic board and the battery replaced recently and I tried to update a few days again by restarting and it froze for over 2 hours. I crashed the computer and it was fine. I finished the updates tonight
-
Need more info on tracking my wireless users
hi went through live tech this amto set up log tracking but that is not the info i wanted, is there a way to find out all users connection on my network, wireless pcs and wired xbox? date, time, etc... thanks for your help
-
Win8 clients can't write over FTPS to Win 2012 with FTP site hosted in IIS 8
I've made an interesting discovery that is mentioned in part on other posts in other forums. This involves IIS; however, I believe the issue rests with the Windows Server 2012 OS. Here's the scenario. Client: Windows 8 almost any FTP client Server: