IMac Desktop not seeing HP6500 on wireless network.

The Background:
I am using OS X Yosemite Operating System (ver. 10.10.1) on an Apple iMac Desktop. My home wireless network is set up correctly and is functioning fine as my iMac, TV and smartphones all can access my home WI-Fi network just fine.
I went into option 8 on the setup screen on the HP 6500 printer and put in the network name and password and the printer reported back that the connection to the wireless network was successful.
The problem:
When I go to "Printers and Scanners" from the System Preferences on the iMac and try to add the printer, I select "Add a printer" and no printer is listed.
How do I:
--Add the printer manually and/or add it via IP address? How can I find the IP address for the printer when it is connected to my home wireless network?
Thank you,
Ron Nolan

Hello RLN60 ,
Welcome to the HP Forums.
I see that you are having an issue with installing the printer to your Mac.
Seeing that no software driver package is available at this time for the Yosemite operating system, try downloading and installing the HP Printer Drivers v3.0 for OS X.
Let me know how you make out and if you have any other questions, feel free to write me back at any time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

IMac can not see Windows machine on network

Hi guys,
Before the AirPort Extreme Update 2007-02, my iMac can connect and share with my Windows machine. However, after installing the AirPort Extreme Update 2007-02, my iMac can not see my Windows machine work-group anymore. How to fix this problem ?
Im using 20' iMac running on Mac OS X 10.4.8
Please help.
DeathNote
iMac 20' inch Mac OS X (10.4.8)

If reinstalling the current update doesn't work, perhaps that is because the update was completed properly, but in the process has messed up configuration settings files and preferences. If you can't find any problems in your settings through System Preferences, then there are probably hidden errors in the .plist files and the way to correct that is by manually wiping out all your network settings files and redoing everything in Network preferences may be a quicker fix than brain surgery. Try deleting these files, then reboot and redo your network settings appropriately..
These are all in the folder /Library/Preferences/SystemConfiguration:
com.apple.airport.preferences.plist
com.apple.nat.plist
NetworkInterfaces.plist
preferences.plist
Note, this will wipe out all network-related settings, and force the OS to rebuild default preference settings files for the built-in network devices. This is sometimes the only thing that will clear up bizarre networking issues, but generally speaking, it works well.. just don't forget to thoroughly note all your proper network settings including wireless network passwords and all that before you perform this house cleaning for reference as a precaution.

Help! Windows XP not seeing macs on wireless network

Hi folks,
I have just bought airport extreme, and have installed all the latest updates on my powerbook, and macpro. I'm trying to add a pc laptop running windows xp 2002 service pack 2 to my local network.
The pc connects to my network, and IS accessible from both my macs, but I can't access my macs from the pc, and I can't print from the usb printer attached to the airport. The current drivers for the printer have been installed on the pc.
I'm not as familiar with pcs as I am with mac, and I've explored as much as I can.
Can anyone help?
Thanks
Brian

Thanks I figured it out.

I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an antennae?

I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an additional antennae? If so, which one because my research is confusing me about what is supposed to work with this computer.

Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

HT1145 The airport extreme used with my iMac is not seeing my other devices...anybody, please?

The airport extreme used with my iMac is not seeing my iPhone 5, iPad (third generation) or my windows based PC. When I open the airport utility it shows only the internet and my iMac. It does not identify the others. Any thoughts? Thanks

Hi DaileyT,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
When do Apple wireless devices appear in AirPort Utility?
http://support.apple.com/kb/HT3624
Troubleshooting missing devices
If your Apple wireless device doesn't show up in the wireless device list, try the following:
Check to see that the device is turned on.
Check that the device is connected to the network via Ethernet or in wireless range of your computer.
Make sure the device has had adequate time to start up and become discoverable. In the case of Apple wireless devices that are not connected via Ethernet, AirPort Utility scans for new devices once every 15 seconds. From the time a device becomes discoverable (typically around one minute), it could take up to another 15 seconds before the device is displayed in the list.
If you have just configured a new Apple Wireless device, upgraded the firmware, selected "Restore Default Settings..." or have hard reset and configured an Apple wireless device and it does not show up in AirPort Utility after restarting, you may have an incorrect setting. You may want to hard reset the unit and set it up again.
If you are connected to a specific wireless network, all Apple wireless devices which make up that network will appear. However, if you "Restore Default Settings..." from AirPort Utility, or hard reset a device that is out of physical wireless range of the computer, you will need to move the device closer the computer to configure it again.
Best of luck,
Mario

My ipod was connecting to my home wi-fi just fine until I uploaded new music from my Itunes on my laptop. Now my ipod and my iphone will not connect to my wireless network. I've tried resetting the network settings etc... Nothing seems to work. Help!

My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!

Does the iOS devices connect to other networks?
Does the iOS devices see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Since both iPhone and iPod stopped connecting I suspect a problem with your network.

MacBook can't see my home wireless network after upgrade to OSX 10.8.5

After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

It appears an SMC reset was required:
HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

PC+AX Error - ....Windows is not setup to manage wireless network....

I'm attempting to setup AX with Windows XP. I have a 802.11g Dlink router (DI-524) that I typically connect to using my work laptop. The PC has a direct connection to the router. The AX constantly flashes amber. I tried hard reseting the AX. When I run Airport Admin Utility on my PC the AX does not show up. However, I can see it using my laptop in the wireless connections. When I open Airport Setup Assistant I get the following error "This computer has no wireless interface enabled or Windows is not setup to manage wireless networks on this computer. If you have....."
I'm not sure what do do from here. Appreciate any help.

I have a Qwest wireless modem (model 2701hg-d) and am trying to set up the Airport Express (AX) to use already existing wireless network wirelessly (ie without the ethernet cable). Is this possible?
In order to set it up I have the AX plugged into the modem via an ethernet cable. I have reset the AX and then run the Admin Utility. Once it recognizes the AX I then go to the Airport tab and select 'Join an Existing wireless Network (wireless client)' and then enter in the Network Name exactly as it is spelled in my modem configuration. I check the 'Internet' tab and it says connect using: Wireless Network adn the 'Network' tab is grayed out. Then I hit update and the admin utility no longer lists the AX and the AX light is blinking amber. Not sure what is going on. I am using v6.2 of the firmware.
Do I need to use WDS?
Also, does anyone know if multiple speaker selection is available for itunes pc like it is in itunes mac? Currently I can only play either my computer speakers OR my kitchen speakers.

My hp c4599 printer will not connect to my wireless network

My hp c4599 printer will not connect to my wireless network or show up on my computer during the installation even though it is usb connected. But it managed to create its own network where i can print wirelessly by selecting it sort of like bluetooth… I have installed different softwares from the hp website and looked at so many different forums but i cant find the answer. I have reset the printer and wireless network and god knows whatelse. I can also print fine through the usb cable, it just will not connect to my wireless network. I am going crazy P.S. once upon a time it was connected to my wireless network but i cant remember what happened.
So can someone please help and please dont be too technical

Hi ..
Try these support articles ..
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
Mac Basics: Printing in OS X

I have an old iphone 3G that I want to use as an ipod touch. It does have a sim card and it has been reset but for some reason it will not pick up my wireless network, or any other wireless network. What is the problem?

I have an old iphone 3G that I want to use as an ipod touch. It does have a sim card in it and it has been reset. For some reason it will not pick up my wireless network in my house, or any other wireless network. What could be the problem?

Is this the problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim

After upgrading to Mavericks my iMac does not see Sony camcorder in iMovie anymore. It still works on MacBook, so nothing wrong with camera or connections.

After upgrading to Mavericks my iMac does not see my Sony camcorder anymore. I tried the new iMovie as well as the old version 9.0.9, which is still in Applications. I checked the camcorder and connections in iMovie on my MacBook (not upgraded) and that still functions properly, so the problem does not seem to be in iMovie, old or new, or in camcorder and connection.
Anybody with the same problem or a solution?
Thanks mbkom

Try this

IMac does not 'see' Sony DCR PC5E when connected

My iMac does not see a SONY DCR 5E videocam when connected using 4pin to USB cable, any ideas?

It depends on what Mac you have and what version of iMovie. You may need to use Firewire.
iMovie 11 - cameras supported:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
iMovie 9 - cameras supported:
http://support.apple.com/kb/HT3290?viewlocale=en_US
iMovie 8 Camcorders supported:
http://support.apple.com/kb/HT1014
Digital camera RAW formats supported by OS X Lion:
http://support.apple.com/kb/HT4757?viewlocale=en_US
Digital camera RAW formats supported by OS X Snow Leopard:
http://support.apple.com/kb/HT3825?viewlocale=en_US

My iMac does not see the new Toshiba external drive in Finder or Disk Utility. How can I get it to see the drive?

My iMac does not see the new Toshiba external drive in Finder or Disk Utility. How can I get it to see the drive?

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive is malfunctioning.

Cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

TS1398 iphone2 can not scan for my wireless network; i tried all troubleshoots but still same problem. Can anyone help?

iPhone2 can not scan for my wireless network; i tried all troubleshoots but still same problem. Can anyone help?

Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.

IMac Desktop not seeing HP6500 on wireless network.

Similar Messages

Maybe you are looking for