Imac display flickerring

Im having a imac, its having a problem with the display..It used to flickker .. I got to know the solution for that, but i couldnt get how to fix it..
I just turn the imac upside down and started , works perfectly.. but when i turned it to normal position it used to flickker... I want to know how to fix the problem!!!!! Please HELP ME !!!!

Hi Jeff,
Thanks for visiting Apple Support Communities.
See this article for some information and tips that can help resolve the behavior you're seeing:
Mac OS X: Why your Mac might not sleep or stay in sleep mode
http://support.apple.com/kb/ht1776
Best,
Jeremy

Similar Messages

Imac Display flickering between brightness?

Hi guys,
My imac 11,2 Intel icore3. Is starting to flicker???
It changes between brightness levels dark/light dark/light?? Doesn't go black, just changes contrast levels.
I do not have the setting to adjust brightness automatically. Just the one, before it goes to sleep, and its unchecked. And still decides to flicker at random times?
Please help,

Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

IMac display mirroring

I have an iMac G5 which is having some issues with video mirroring. When I try plugging a TV into it via the Apple video adapter, the imac display flickers, indicating it has adjusted to the new display, but there is no image on the TV. The System Preferences indicates that there is a "VGA Display" attached. (I believe that is supposed to say "NTSC/PAL." That is what my PowerBook says in any case)
Now however I have a new problem. The Apple Video Adapter is unplugged but the iMac still thinks that the "VGA Display" (actually the apple video adapter) is plugged in. It is stuck at a certain resolution (1028x768) and if i put it at a higher resolution it still shows only 1028x728 pixels, except now they are in the middle of the screen with a black border around it. (I believe this is normal behavior.... for when a TV is actually attached)
Any ideas? Both for the first problem (iMac thinks TV is a VGA Display) and the second (iMac thinks there's an external display attached when there is not). Thanks.
iMac G5, 1st Gen 1.8 GHz 17" Mac OS X (10.4.4)

Im having the same issues and would like to know if there is a solution...its driving me crazy!

Brightness/Flickering problem with left hand side of 2011 iMac display

Hi,
My 2011 iMac has recently developed a fault with the left hand side of the display flickering and being very dark. I've googled this and found that many other people seem to have this issue. As per other forum posts, if I apply a little pressure to the bottom left of the screen then this temporarily resolves itself, but this is obviously not a permanent solution.
I'm not happy as my £1500 iMac is only 18 months old, and I've been told from an authorised apple repair centre, that it's going to cost £600 to fix.
I've spent the best part of an hour trying to call apple to speak to a human being, but the automated voice menu wants to charge me £35 before even putting me through. Does anyone have a phone number which would allow me to speak to a real person so I can make a complaint?
Paul.

Sounds like it will be an international call (and sounds like you have all the local numbers), but you might try calling Cupertino and then ask for customer support
408-996-1010
Unless there were some repair program for this issue, if it's out of warranty, I doubt you'll get very far with it.

Imac 21.5 (ver 10.6.8) Display flickers and it goes blank

Display flickers and its brightness automatically increases and decreases intermittently. After some time the Display goes blank and it doesn't appear even after pressing the power button or restarting the PC. At times it does appear after pressing the power button frequently or if the PC is left ON for some time. I am using software ver 10.6.8. Want to whether this problem will be resolved after upgrading it to Mavericks. But I am worried that during the downloading if the display goes off and if I have to restart the PC then I will have to start the downloading from the beginning. Please suggest.

If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
Genius Bar Reservation US
Authorized Service Provider

Intel imac display glitch and involuntary restart

Just want to know if anyone else has experienced this specific problem, there are plenty of complaints about intel imac displays but I can't be bothered to sift through them all trying to find a match for my problem.
A couple of months ago I was watching a video in quicktime and noticed that my screen was glitching and flashing fragmented diagonal lines - like a commodore 64 loading type thing. Then the spinning-ball came up and a force quit didn't do anything so I had to force shut down. I started up and it occured again. Then the screen went blank/black, but still lit up, and restarted without me doing anything. It also got stuck during start up the second time this occured. I panicked and ran out to buy a 500GB external drive, backed up all of my work and then re-installed mac osx from disk, archive and install job. This seemed to sort it and for the following two months it seemed OK. No sign of any problems.
Since then I have updated from 10.4.7 to 10.4.10 (which I have suspicion that it screwed the firmware in my motu 828 firewire audio interface, costing me a £130 repair - but that's another painful story).
It happened again tonight (the screen thing, not the motu). And the ball came up and I couldn't do anything. Force shut down, restart - screen glitching again. Then I had 2 unexpected restarts, one getting stuck in startup. Then a successful startup but accompanied by the glitchy graphics, mainly red/pink pixellated diagonal lines flickering in and out. I ran a disk first aid - no problems. Did a disk permission repair. Shut down and ran a hardware test, the first few minutes of the test the screen was still at it but then stopped glitching, hardware test found no errors (it was an extended test too). Now I'm back on it and it's all OK.
Any suggestions/similar stories?
When it occured 2 months ago I had the original ram that came with the imac. Now I have 2x1GB sticks of crucial ram.

That's it! Well, that's what I have. Unfortunately, I don't know about the cause, but I don't ever recall having it prior to an update going back about a year ago. I recall an update, and that update being immediately followed by some sort of Apple Graphics something-or-other. I feel pretty certain that's when I first noticed this. I just had my LCD replaced for another reason, but I think you'll agree, it's not an LCD issue. In my case, browser activity, scrolling up or down in a page, seems to be the most common trigger. I've also seen "pieces" of the torn page, on the screen when minimizing the browser to the dock (usually Firefox, but I think I've seen it with Opera and Safari too). Is there a way to find update packages installed somewhere? I'd know it if I saw it, and I'd definitely try removing that suspect package/update.
Message was edited by: geekboy2000 - corrected OS

24" Alum: iMac Display Flicker

I've noticed that upon waking up from sleep, my 24" aluminum iMac's display flickers, especially in the right corner area of the screen. It stops after 10-20 seconds. Is this something I should be concerned with? Thank you.

That's definitely not normal. Call Apple Care or take the computer in to an Apple store.

Imac display brightness has dropped

For the last few weeks, my 27" imac (2011) has been experiencing random flickering where the display would flicker between it's set brightness and medium brightness, but it was never something that I would be able to predict or trigger. Then last night my display flickered and and stayed dimmer.
The display is still visibile and backlight still works, but at full brightness in a fairly dark room, the display is now noticably dimmer than it was before, where before hand in a dark room it was necessary to drop the brightness to below half to where now it is just right in a dark room, but in a lit room the display isn't quite bright enough. Basically the display is not as bright as it used to be, any idea what it could be?

Laundry Beach mean resetting the PRAM. You can find directions by clicking Intel iMac SMC and PRAM resets

Imac display flickr and double picture

I have a 27" iMac that i have had for just over the 90 days of phone support. The display just started flickering and showing a double vision about 1 inch above where things are supposed to be. The apple rep when I called in said it was likely a software issue. Ive tried the imac display firmware update but it says that it doesnt need to install it. Does anyone have any other ideas on how to fix it?

HI,
Run the Apple Hardware Test from your install disc just in case.
Intel-based Macs: Using Apple Hardware Test
Try Resetting the PRAM
Carolyn

Some times my new iMacs display start flickring when I starts playing a game. I am very annoyed. I have bought it only 1 month ago. What can I do?

Some times my new iMacs display start flickring when I starts playing a game. I am very annoyed. I have bought it only 1 month ago. What can I do?

A flickering display sounds to me like a hardware problem. Or does this only happen with a specific game? Of course your machine is still under warrantee so you could take advantge of it if you have a local apple store.

Putting iMac display to sleep, when using TV as a screen.

I have just connected my iMac to my 42" Panasonic 1080p TV, the connection was easy and is working fine. My questions relates to putting the iMac display to sleep when using the TV as a monitor, if I am watching You Tube, Sky Player or a DVD, I intend to use my TV as the monitor. Is it possible for the iMac to puts its display to sleep, whilst leaving the TV on. I played around with this today, however was unable to manage this.
Regards Craig

Hi Craig
There is no way to independently sleep either the iMac's Display or an attached Display/TV. However if in the Display Arrangement Preferences you set the attached Display or TV to be the Main Display and turn Mirroring Off, then FrontRow and the Full Screen Mode app's like, DVD player, QuickTimePlayer, etc. will black out the unused iMac display.
Dennis

User Contributed Tips in Intel-based iMac Your Intel-based iMac Display

*The following User Contributed Tips are located in the Intel-based iMac > Your Intel-based iMac Display forum:*
a brody - Using a second Mac as a display for a first
http://discussions.apple.com/thread.jspa?threadID=1587927
Publish date: July 7, 2008
*The following related tips are located in other areas of Apple Discussions:*
See also User Tips Library

My 20" 2.16 GHz Intel Core 2 Duo had become almost useless due to freezes and crashes- with NO crash reports in the logs.
They were often preceeded by video glitches, so I assumed it was a bad video card- unfortunately soldered to mother board.
Apparently, from forum postings, this is not an uncommon problem. The computer would run longer if the day was cooler, but rarely more than 10 minutes, so I suspected it was aggravated by heat.
Then I found this post from Bodomann on an Apple Support forum:
"Following up on my previous posting regarding my son's late model 2006 iMac that required a $900 logic board replacement:
Turns out the problem is apparently related to a bad CPU temp sensor. I installed 'iMac Fan Control' (Google it) which reported the CPU temp always at 32 degrees Fahrenheit (obviously incorrect). The same software allowed me to adjust the CPU fan manually. After multiple trials I set the CPU speed to 2800RPM after which the system would run forever - never freezing with the dreaded grey box 'reboot me' screen. I tried several times reverting the software to default speeds and the system would always crash within 10 minutes. "
I downloaded free Fan Control 1.2 for Imac from Derman Enterprises (they have an Intel iMac and a Mac Book/Pro version). It installs as a system preferences control panel. I cranked up all three fan speeds. The fans sped up noticeably. Horizontal lines have gone from screen (so far), no color artifacts and no crashes yet. I may have a real computer back! Hope Apple checks this out-
The control panel also gives the temps sensors are reporting at the CPU, hard drive and DVD drive. The CPU sensor reports the CPU temp as 32 degrees F- which is clearly wrong, unless Apple has been installing little refrigerators inside.
So thanks to Bodomann for posting- Hats off and three cheers to Derman and Cristoph for source code.
http://www.derman.com/iMac-Fan-Control
http://www.lobotomo.com/products/FanControl/index.html

When streaming a movie from an imac to apple tv, is there a way of putting the imac display off? I find it a waste having the screen on in another room. Any advice?

When streaming a movie from an imac to apple tv, is there a way of putting the imac display off? I find it a waste having the screen on in another room. Any advice?

No problem.
This is a user forum so you are not addressing Apple. There's nothing to fix, that's how home-sharing works. There would be no way for the ATV to recognize your library and display content if the computer is in sleep mode.
You can always airplay from an IOS device or use icloud if you don't wish to keep the computer on.

IMac - Display doesn´t work after restart

My iMac 21 Display doesn´t work after restart. If I turn it off and 1 hour later I want use it again the iMac shows the white screen with the mac logo and then the display goes off. I connected an external display to check if the iMac was ON and with the external display I can login and do everything but the iMac Display doesn´t work .
If I turn it off and wait 3 or 4 hours and then turn it back on the display works OK.
This is very strange behavior I have spent hours and hours trying to fine the solution or a similar issue but nothing so I am looking help here at apple.com
BTW When I bougth the iMac 21 there were some spots over the display so the display was replaced by the provider. The warranty has expired by now.

To tell you the truth, I don't know if they have to repalce the LCD panel or what they do for a bad backlight. In this reality of block or assembly replacement it probably involves repalcing the panel and not the backlight component. Don't know what it would cost. You'd have to ask that of a service center.

External Display Flickers (Intel on board)

Hi,
I have recently made a fresh installation of Arch Linux and trying to setup it for my work environment. I made a basic installation of xfce4 with slim login manager. I wanted to hook my laptop with an external display. I used xrandr to extend my laptop display with the external display. Everything worked fine but my external display flickers insanely bad. I cannot stare at it for > 30s. I dual boot on windows, so I tested the same setup with windows and it worked just fine, out of the box. I even used one of my friend's laptop who's running ubuntu and has the same h/w. It worked out of the box. I have spent more than 8 hours trying to find out where the issue would be and miserably failed. Below are certain logs and output that might help traingulate my issue.
Its a Dell Inspiron N4030, with Intel onboard graphics. I have the xf86-video-intel driver installed and the display works perfectly fine with laptops default display.
Output of xrandr -q
[joker@lucifer ~]$ xrandr -q
Screen 0: minimum 320 x 200, current 2732 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
1366x768 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1366x768+1366+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.0*+
1024x768 75.1 72.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
/var/log/Xorg.0.log
[ 42.854]
X.Org X Server 1.11.2
Release Date: 2011-11-04
[ 42.854] X Protocol Version 11, Revision 0
[ 42.854] Build Operating System: Linux 3.1.0-3-ARCH x86_64
[ 42.854] Current Operating System: Linux lucifer 3.1.0-4-ARCH #1 SMP PREEMPT Mon Nov 7 22:47:18 CET 2011 x86_64
[ 42.854] Kernel command line: root=/dev/sda5 ro
[ 42.854] Build Date: 07 November 2011 07:53:00AM
[ 42.854]
[ 42.854] Current version of pixman: 0.24.0
[ 42.854] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 42.854] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 42.855] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 10 17:07:34 2011
[ 42.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 42.927] (==) ServerLayout "DualSreen"
[ 42.927] (**) |-->Screen "Screen0" (0)
[ 42.927] (**) | |-->Monitor "Monitor0"
[ 42.945] (**) | |-->Device "Device0"
[ 42.945] (**) |-->Screen "Screen1" (1)
[ 42.945] (**) | |-->Monitor "Monitor1"
[ 42.945] (**) | |-->Device "Device1"
[ 42.945] (**) Option "Xinerama" "1"
[ 42.945] (==) Automatically adding devices
[ 42.945] (==) Automatically enabling devices
[ 42.945] (**) Xinerama: enabled
[ 43.004] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 43.004] Entry deleted from font path.
[ 43.004] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 43.004] Entry deleted from font path.
[ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 43.005] Entry deleted from font path.
[ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 43.005] Entry deleted from font path.
[ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 43.005] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 43.005] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 43.005] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 43.005] (II) Loader magic: 0x7ccae0
[ 43.005] (II) Module ABI versions:
[ 43.005] X.Org ANSI C Emulation: 0.4
[ 43.005] X.Org Video Driver: 11.0
[ 43.005] X.Org XInput driver : 13.0
[ 43.005] X.Org Server Extension : 6.0
[ 43.006] (--) PCI:*(0:0:2:0) 8086:0046:1028:0466 rev 2, Mem @ 0xfac00000/4194304, 0xc0000000/268435456, I/O @ 0x0000f080/8
[ 43.006] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 43.006] (II) LoadModule: "extmod"
[ 43.027] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 43.043] (II) Module extmod: vendor="X.Org Foundation"
[ 43.043] compiled for 1.11.2, module version = 1.0.0
[ 43.043] Module class: X.Org Server Extension
[ 43.043] ABI class: X.Org Server Extension, version 6.0
[ 43.043] (II) Loading extension MIT-SCREEN-SAVER
[ 43.043] (II) Loading extension XFree86-VidModeExtension
[ 43.043] (II) Loading extension XFree86-DGA
[ 43.043] (II) Loading extension DPMS
[ 43.043] (II) Loading extension XVideo
[ 43.043] (II) Loading extension XVideo-MotionCompensation
[ 43.043] (II) Loading extension X-Resource
[ 43.044] (II) LoadModule: "dbe"
[ 43.044] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 43.045] (II) Module dbe: vendor="X.Org Foundation"
[ 43.045] compiled for 1.11.2, module version = 1.0.0
[ 43.045] Module class: X.Org Server Extension
[ 43.045] ABI class: X.Org Server Extension, version 6.0
[ 43.045] (II) Loading extension DOUBLE-BUFFER
[ 43.045] (II) LoadModule: "glx"
[ 43.045] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 43.060] (II) Module glx: vendor="X.Org Foundation"
[ 43.060] compiled for 1.11.2, module version = 1.0.0
[ 43.060] ABI class: X.Org Server Extension, version 6.0
[ 43.060] (==) AIGLX enabled
[ 43.060] (II) Loading extension GLX
[ 43.060] (II) LoadModule: "record"
[ 43.060] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 43.061] (II) Module record: vendor="X.Org Foundation"
[ 43.061] compiled for 1.11.2, module version = 1.13.0
[ 43.061] Module class: X.Org Server Extension
[ 43.061] ABI class: X.Org Server Extension, version 6.0
[ 43.061] (II) Loading extension RECORD
[ 43.061] (II) LoadModule: "dri"
[ 43.061] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 43.063] (II) Module dri: vendor="X.Org Foundation"
[ 43.063] compiled for 1.11.2, module version = 1.0.0
[ 43.063] ABI class: X.Org Server Extension, version 6.0
[ 43.063] (II) Loading extension XFree86-DRI
[ 43.063] (II) LoadModule: "dri2"
[ 43.063] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 43.064] (II) Module dri2: vendor="X.Org Foundation"
[ 43.064] compiled for 1.11.2, module version = 1.2.0
[ 43.064] ABI class: X.Org Server Extension, version 6.0
[ 43.064] (II) Loading extension DRI2
[ 43.064] (II) LoadModule: "intel"
[ 43.091] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 43.114] (II) Module intel: vendor="X.Org Foundation"
[ 43.114] compiled for 1.10.99.902, module version = 2.16.0
[ 43.114] Module class: X.Org Video Driver
[ 43.114] ABI class: X.Org Video Driver, version 11.0
[ 43.114] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 43.114] (++) using VT number 7
[ 43.134] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 43.135] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 43.135] Requested Entity already in use!
[ 43.135] (EE) Screen 1 deleted because of no matching config section.
[ 43.135] (II) UnloadModule: "intel"
[ 43.136] (II) Unloading intel
[ 43.136] drmOpenDevice: node name is /dev/dri/card0
[ 43.136] drmOpenDevice: open result is 8, (OK)
[ 43.136] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.136] drmOpenDevice: node name is /dev/dri/card0
[ 43.136] drmOpenDevice: open result is 8, (OK)
[ 43.136] drmOpenByBusid: drmOpenMinor returns 8
[ 43.136] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.136] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 43.136] (==) intel(0): RGB weight 888
[ 43.136] (==) intel(0): Default visual is TrueColor
[ 43.136] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 43.136] (--) intel(0): Chipset: "Arrandale"
[ 43.136] (**) intel(0): Relaxed fencing enabled
[ 43.136] (**) intel(0): Wait on SwapBuffers? enabled
[ 43.136] (**) intel(0): Triple buffering? enabled
[ 43.136] (**) intel(0): Framebuffer tiled
[ 43.136] (**) intel(0): Pixmaps tiled
[ 43.136] (**) intel(0): 3D buffers tiled
[ 43.136] (**) intel(0): SwapBuffers wait enabled
[ 43.136] (==) intel(0): video overlay key set to 0x101fe
[ 43.136] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 43.136] (**) intel(0): Option "Enable" "true"
[ 43.136] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 43.196] (II) intel(0): Output VGA1 has no monitor section
[ 43.196] (II) intel(0): EDID for output LVDS1
[ 43.196] (II) intel(0): Manufacturer: BOE Model: 58e Serial#: 0
[ 43.196] (II) intel(0): Year: 2010 Week: 1
[ 43.196] (II) intel(0): EDID Version: 1.4
[ 43.196] (II) intel(0): Digital Display Input
[ 43.196] (II) intel(0): Undefined color depth
[ 43.196] (II) intel(0): Digital interface is undefined
[ 43.196] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 43.196] (II) intel(0): Gamma: 2.20
[ 43.196] (II) intel(0): No DPMS capabilities specified
[ 43.196] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 43.196] (II) intel(0): First detailed timing is preferred mode
[ 43.196] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 43.196] (II) intel(0): redX: 0.574 redY: 0.335 greenX: 0.335 greenY: 0.585
[ 43.196] (II) intel(0): blueX: 0.154 blueY: 0.119 whiteX: 0.312 whiteY: 0.328
[ 43.196] (II) intel(0): Manufacturer's mask: 0
[ 43.196] (II) intel(0): Supported detailed timing:
[ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
[ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
[ 43.196] (II) intel(0): Supported detailed timing:
[ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
[ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
[ 43.196] (II) intel(0): KFDV9HT14101
[ 43.196] (II) intel(0): Unknown vendor-specific block 0
[ 43.196] (II) intel(0): EDID (in hex):
[ 43.196] (II) intel(0): 00ffffffffffff0009e58e0500000000
[ 43.196] (II) intel(0): 01140104801f11780a3fa09355559527
[ 43.196] (II) intel(0): 1e505400000001010101010101010101
[ 43.196] (II) intel(0): 010101010101411c56a0500016303020
[ 43.196] (II) intel(0): 360035ad1000001a411c56a050001630
[ 43.196] (II) intel(0): 3020360035ad1000001a000000fe004b
[ 43.196] (II) intel(0): 46445639814854313431303100000000
[ 43.196] (II) intel(0): 00004101940100000001010a20200000
[ 43.196] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 43.196] (II) intel(0): Printing DDC gathered Modelines:
[ 43.196] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 43.196] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 43.196] (II) intel(0): Printing probed modes for output LVDS1
[ 43.196] (II) intel(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 43.196] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 43.196] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 43.196] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 43.196] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 43.255] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 43.255] (II) intel(0): EDID for output VGA1
[ 43.255] (II) intel(0): Manufacturer: PHL Model: c02d Serial#: 9740
[ 43.255] (II) intel(0): Year: 2009 Week: 35
[ 43.255] (II) intel(0): EDID Version: 1.3
[ 43.255] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 43.255] (II) intel(0): Sync: Separate
[ 43.255] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 43.255] (II) intel(0): Gamma: 2.20
[ 43.255] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 43.255] (II) intel(0): First detailed timing is preferred mode
[ 43.255] (II) intel(0): redX: 0.635 redY: 0.335 greenX: 0.281 greenY: 0.597
[ 43.255] (II) intel(0): blueX: 0.153 blueY: 0.085 whiteX: 0.312 whiteY: 0.328
[ 43.255] (II) intel(0): Supported established timings:
[ 43.255] (II) intel(0): 720x400@70Hz
[ 43.255] (II) intel(0): 640x480@60Hz
[ 43.255] (II) intel(0): 640x480@67Hz
[ 43.255] (II) intel(0): 640x480@72Hz
[ 43.255] (II) intel(0): 640x480@75Hz
[ 43.255] (II) intel(0): 800x600@56Hz
[ 43.255] (II) intel(0): 800x600@60Hz
[ 43.255] (II) intel(0): 800x600@72Hz
[ 43.255] (II) intel(0): 800x600@75Hz
[ 43.255] (II) intel(0): 832x624@75Hz
[ 43.255] (II) intel(0): 1024x768@60Hz
[ 43.255] (II) intel(0): 1024x768@70Hz
[ 43.255] (II) intel(0): 1024x768@75Hz
[ 43.255] (II) intel(0): Manufacturer's mask: 0
[ 43.255] (II) intel(0): Supported standard timings:
[ 43.255] (II) intel(0): #0: hsize: 640 vsize 400 refresh: 70 vid: 2609
[ 43.255] (II) intel(0): #1: hsize: 1024 vsize 768 refresh: 72 vid: 19553
[ 43.255] (II) intel(0): Supported detailed timing:
[ 43.255] (II) intel(0): clock: 85.8 MHz Image Size: 344 x 194 mm
[ 43.255] (II) intel(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 43.255] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 43.255] (II) intel(0): Serial No: AU50935009740
[ 43.255] (II) intel(0): Monitor name: Philips 160E
[ 43.255] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 60 kHz, PixClock max 86 MHz
[ 43.255] (II) intel(0): EDID (in hex):
[ 43.255] (II) intel(0): 00ffffffffffff00410c2dc00c260000
[ 43.255] (II) intel(0): 23130103682213782ab370a255489827
[ 43.255] (II) intel(0): 155054bfee00310a614c010101010101
[ 43.255] (II) intel(0): 0101010101017f2156aa51001e30468f
[ 43.255] (II) intel(0): 330058c21000001e000000ff00415535
[ 43.255] (II) intel(0): 30393335303039373430000000fc0050
[ 43.255] (II) intel(0): 68696c69707320313630450a000000fd
[ 43.255] (II) intel(0): 00384c1e3c08000a20202020202000c0
[ 43.255] (II) intel(0): Printing probed modes for output VGA1
[ 43.255] (II) intel(0): Modeline "1366x768"x60.0 85.75 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.9 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x72.0 78.44 1024 1080 1192 1360 768 769 772 801 -hsync +vsync (57.7 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 43.255] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 43.255] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 43.255] (II) intel(0): Output LVDS1 enabled by config file
[ 43.255] (II) intel(0): Output VGA1 connected
[ 43.255] (II) intel(0): Using exact sizes for initial modes
[ 43.255] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 43.255] (II) intel(0): Output VGA1 using initial mode 1366x768
[ 43.255] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 43.255] (II) intel(0): Kernel page flipping support detected, enabling
[ 43.255] (**) intel(0): Display dimensions: (310, 170) mm
[ 43.255] (**) intel(0): DPI set to (111, 114)
[ 43.255] (II) Loading sub module "fb"
[ 43.255] (II) LoadModule: "fb"
[ 43.255] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 43.277] (II) Module fb: vendor="X.Org Foundation"
[ 43.277] compiled for 1.11.2, module version = 1.0.0
[ 43.277] ABI class: X.Org ANSI C Emulation, version 0.4
[ 43.277] (II) Loading sub module "dri2"
[ 43.277] (II) LoadModule: "dri2"
[ 43.277] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 43.277] (II) Module dri2: vendor="X.Org Foundation"
[ 43.277] compiled for 1.11.2, module version = 1.2.0
[ 43.277] ABI class: X.Org Server Extension, version 6.0
[ 43.277] (==) Depth 24 pixmap format is 32 bpp
[ 43.277] (II) intel(0): [DRI2] Setup complete
[ 43.277] (II) intel(0): [DRI2] DRI driver: i965
[ 43.277] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 43.339] (II) UXA(0): Driver registered support for the following operations:
[ 43.339] (II) solid
[ 43.339] (II) copy
[ 43.339] (II) composite (RENDER acceleration)
[ 43.339] (II) put_image
[ 43.339] (II) get_image
[ 43.339] (==) intel(0): Backing store disabled
[ 43.339] (==) intel(0): Silken mouse enabled
[ 43.339] (II) intel(0): Initializing HW Cursor
[ 43.456] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 43.466] (==) intel(0): DPMS enabled
[ 43.466] (==) intel(0): Intel XvMC decoder enabled
[ 43.466] (II) intel(0): Set up textured video
[ 43.466] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 43.466] (II) intel(0): direct rendering: DRI2 Enabled
[ 43.466] (WW) intel(0): Option "Enable" is not used
[ 43.466] (WW) intel(0): Option "TwinView" is not used
[ 43.466] (==) intel(0): hotplug detection: "enabled"
[ 43.466] (--) RandR disabled
[ 43.466] (II) Initializing built-in extension Generic Event Extension
[ 43.466] (II) Initializing built-in extension SHAPE
[ 43.466] (II) Initializing built-in extension MIT-SHM
[ 43.466] (II) Initializing built-in extension XInputExtension
[ 43.466] (II) Initializing built-in extension XTEST
[ 43.466] (II) Initializing built-in extension BIG-REQUESTS
[ 43.466] (II) Initializing built-in extension SYNC
[ 43.466] (II) Initializing built-in extension XKEYBOARD
[ 43.466] (II) Initializing built-in extension XC-MISC
[ 43.466] (II) Initializing built-in extension SECURITY
[ 43.466] (II) Initializing built-in extension XINERAMA
[ 43.466] (II) Initializing built-in extension XFIXES
[ 43.466] (II) Initializing built-in extension RENDER
[ 43.466] (II) Initializing built-in extension RANDR
[ 43.466] (II) Initializing built-in extension COMPOSITE
[ 43.466] (II) Initializing built-in extension DAMAGE
[ 43.605] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 43.605] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 43.605] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 43.605] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 43.605] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 43.605] (II) AIGLX: Loaded and initialized i965
[ 43.605] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 43.605] (II) intel(0): Setting screen physical size to 361 x 203
[ 43.909] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 43.910] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 43.910] (II) LoadModule: "evdev"
[ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.910] (II) Module evdev: vendor="X.Org Foundation"
[ 43.910] compiled for 1.10.99.902, module version = 2.6.0
[ 43.910] Module class: X.Org XInput Driver
[ 43.910] ABI class: X.Org XInput driver, version 13.0
[ 43.910] (II) Using input driver 'evdev' for 'Power Button'
[ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.911] (**) Power Button: always reports core events
[ 43.911] (**) Power Button: Device: "/dev/input/event7"
[ 43.911] (--) Power Button: Found keys
[ 43.911] (II) Power Button: Configuring as keyboard
[ 43.911] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
[ 43.911] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 43.911] (**) Option "xkb_rules" "evdev"
[ 43.911] (**) Option "xkb_model" "evdev"
[ 43.911] (**) Option "xkb_layout" "us"
[ 43.931] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 43.931] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 43.931] (II) Using input driver 'evdev' for 'Video Bus'
[ 43.931] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.931] (**) Video Bus: always reports core events
[ 43.931] (**) Video Bus: Device: "/dev/input/event15"
[ 43.931] (--) Video Bus: Found keys
[ 43.931] (II) Video Bus: Configuring as keyboard
[ 43.931] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15/event15"
[ 43.931] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 43.931] (**) Option "xkb_rules" "evdev"
[ 43.931] (**) Option "xkb_model" "evdev"
[ 43.931] (**) Option "xkb_layout" "us"
[ 43.932] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 43.932] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 43.932] (II) Using input driver 'evdev' for 'Power Button'
[ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.932] (**) Power Button: always reports core events
[ 43.932] (**) Power Button: Device: "/dev/input/event4"
[ 43.932] (--) Power Button: Found keys
[ 43.932] (II) Power Button: Configuring as keyboard
[ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 43.932] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 43.932] (**) Option "xkb_rules" "evdev"
[ 43.932] (**) Option "xkb_model" "evdev"
[ 43.932] (**) Option "xkb_layout" "us"
[ 43.932] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 43.932] (II) No input driver/identifier specified (ignoring)
[ 43.932] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[ 43.932] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 43.932] (II) Using input driver 'evdev' for 'Sleep Button'
[ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.932] (**) Sleep Button: always reports core events
[ 43.932] (**) Sleep Button: Device: "/dev/input/event6"
[ 43.932] (--) Sleep Button: Found keys
[ 43.932] (II) Sleep Button: Configuring as keyboard
[ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6"
[ 43.932] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 43.933] (**) Option "xkb_rules" "evdev"
[ 43.933] (**) Option "xkb_model" "evdev"
[ 43.933] (**) Option "xkb_layout" "us"
[ 43.933] (II) config/udev: Adding input device HID 413c:8161 (/dev/input/event2)
[ 43.933] (**) HID 413c:8161: Applying InputClass "evdev keyboard catchall"
[ 43.933] (II) Using input driver 'evdev' for 'HID 413c:8161'
[ 43.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.933] (**) HID 413c:8161: always reports core events
[ 43.933] (**) HID 413c:8161: Device: "/dev/input/event2"
[ 43.933] (--) HID 413c:8161: Found keys
[ 43.933] (II) HID 413c:8161: Configuring as keyboard
[ 43.933] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input2/event2"
[ 43.933] (II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD, id 10)
[ 43.933] (**) Option "xkb_rules" "evdev"
[ 43.933] (**) Option "xkb_model" "evdev"
[ 43.933] (**) Option "xkb_layout" "us"
[ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/event3)
[ 43.934] (**) HID 413c:8162: Applying InputClass "evdev pointer catchall"
[ 43.934] (II) Using input driver 'evdev' for 'HID 413c:8162'
[ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.934] (**) HID 413c:8162: always reports core events
[ 43.934] (**) HID 413c:8162: Device: "/dev/input/event3"
[ 43.934] (--) HID 413c:8162: Found 3 mouse buttons
[ 43.934] (--) HID 413c:8162: Found relative axes
[ 43.934] (--) HID 413c:8162: Found x and y relative axes
[ 43.934] (II) HID 413c:8162: Configuring as mouse
[ 43.934] (**) HID 413c:8162: YAxisMapping: buttons 4 and 5
[ 43.934] (**) HID 413c:8162: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input3/event3"
[ 43.934] (II) XINPUT: Adding extended input device "HID 413c:8162" (type: MOUSE, id 11)
[ 43.934] (II) HID 413c:8162: initialized for relative axes.
[ 43.934] (**) HID 413c:8162: (accel) keeping acceleration scheme 1
[ 43.934] (**) HID 413c:8162: (accel) acceleration profile 0
[ 43.934] (**) HID 413c:8162: (accel) acceleration factor: 2.000
[ 43.934] (**) HID 413c:8162: (accel) acceleration threshold: 4
[ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/mouse1)
[ 43.934] (II) No input driver/identifier specified (ignoring)
[ 43.934] (II) config/udev: Adding input device Laptop_Integrated_Webcam_0.3M (/dev/input/event10)
[ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Applying InputClass "evdev keyboard catchall"
[ 43.934] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_0.3M'
[ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.934] (**) Laptop_Integrated_Webcam_0.3M: always reports core events
[ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Device: "/dev/input/event10"
[ 43.934] (--) Laptop_Integrated_Webcam_0.3M: Found keys
[ 43.934] (II) Laptop_Integrated_Webcam_0.3M: Configuring as keyboard
[ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 43.934] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_0.3M" (type: KEYBOARD, id 12)
[ 43.934] (**) Option "xkb_rules" "evdev"
[ 43.934] (**) Option "xkb_model" "evdev"
[ 43.934] (**) Option "xkb_layout" "us"
[ 43.935] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 43.935] (II) No input driver/identifier specified (ignoring)
[ 43.935] (II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event12)
[ 43.935] (II) No input driver/identifier specified (ignoring)
[ 43.935] (II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event13)
[ 43.935] (II) No input driver/identifier specified (ignoring)
[ 43.935] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 43.935] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 43.935] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 43.935] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.936] (**) USB OPTICAL MOUSE: always reports core events
[ 43.936] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 43.936] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 43.936] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 43.936] (--) USB OPTICAL MOUSE: Found relative axes
[ 43.936] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 43.936] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 43.936] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 43.936] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 43.936] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 43.936] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1/event1"
[ 43.936] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
[ 43.936] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 43.936] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 43.936] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 43.936] (II) No input driver/identifier specified (ignoring)
[ 43.936] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 43.936] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 43.936] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 43.936] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.936] (**) AT Translated Set 2 keyboard: always reports core events
[ 43.936] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 43.936] (--) AT Translated Set 2 keyboard: Found keys
[ 43.936] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 43.936] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 43.936] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 43.936] (**) Option "xkb_rules" "evdev"
[ 43.936] (**) Option "xkb_model" "evdev"
[ 43.936] (**) Option "xkb_layout" "us"
[ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event14)
[ 43.937] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 43.937] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 43.937] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.937] (**) PS/2 Generic Mouse: always reports core events
[ 43.937] (**) PS/2 Generic Mouse: Device: "/dev/input/event14"
[ 43.937] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[ 43.937] (--) PS/2 Generic Mouse: Found relative axes
[ 43.937] (--) PS/2 Generic Mouse: Found x and y relative axes
[ 43.937] (II) PS/2 Generic Mouse: Configuring as mouse
[ 43.937] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 43.937] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 43.937] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[ 43.937] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
[ 43.937] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 43.937] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse2)
[ 43.937] (II) No input driver/identifier specified (ignoring)
[ 43.937] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 43.937] (II) No input driver/identifier specified (ignoring)
[ 43.938] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
[ 43.938] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 43.938] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 43.938] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.938] (**) Dell WMI hotkeys: always reports core events
[ 43.938] (**) Dell WMI hotkeys: Device: "/dev/input/event9"
[ 43.938] (--) Dell WMI hotkeys: Found keys
[ 43.938] (II) Dell WMI hotkeys: Configuring as keyboard
[ 43.938] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 43.938] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[ 43.938] (**) Option "xkb_rules" "evdev"
[ 43.938] (**) Option "xkb_model" "evdev"
[ 43.938] (**) Option "xkb_layout" "us"
[ 48.392] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 48.392] (II) intel(0): Printing DDC gathered Modelines:
[ 48.392] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 48.456] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 48.457] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 48.457] (II) intel(0): Printing DDC gathered Modelines:
[ 48.457] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 48.517] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 49.976] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 49.976] (II) intel(0): Printing DDC gathered Modelines:
[ 49.976] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 50.035] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 213.440] (II) config/udev: removing device USB OPTICAL MOUSE
[ 213.440] (II) USB OPTICAL MOUSE: Close
[ 213.440] (II) UnloadModule: "evdev"
[ 213.440] (II) Unloading evdev
[ 213.728] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 213.728] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 213.728] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 213.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 213.728] (**) USB OPTICAL MOUSE: always reports core events
[ 213.728] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 213.728] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 213.728] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 213.728] (--) USB OPTICAL MOUSE: Found relative axes
[ 213.728] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 213.728] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 213.728] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 213.728] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 213.728] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 213.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input16/event1"
[ 213.728] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
[ 213.728] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 213.728] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 213.730] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 213.730] (II) No input driver/identifier specified (ignoring)
[ 1627.253] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1627.253] (II) intel(0): Printing DDC gathered Modelines:
[ 1627.253] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1627.311] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1644.964] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1644.964] (II) intel(0): Printing DDC gathered Modelines:
[ 1644.964] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.027] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.042] (II) intel(0): Allocated new frame buffer 2752x768 stride 11264, tiled
[ 1645.230] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.230] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.230] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.289] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.307] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.307] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.307] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.365] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.387] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.387] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.387] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.446] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.447] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.447] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.447] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.505] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 2335.972] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 2335.972] (II) intel(0): Printing DDC gathered Modelines:
[ 2335.972] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 2336.030] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
lspci output
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
13:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast Ethernet (rev c1)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

No one? I have the exact same problem. MSI x360 laptop, intel onboard graphics. I too use xrandr. I've seen elsewhere that windows users have solved this by turning off GPU overclocking. Maybe this can point us in the right direction?

Imac display flickerring

Similar Messages

Maybe you are looking for