IMac Display Tilting Causing Cable Strain?

I have the latest iMac with various cables plugged into most of the rear ports. I recently had a display port connector go bad, seemingly beacuse the constant tilting of the display eventually caused the wiring to fray and come loose. Indeed the connector wiggled in it's housing. Granted the cord was not the highest quality, but it made me realize that every time I adjust the tilt of the display, the cables are going to endure some strain at the connectors with mixed results.
I thought a cable extender might help by moving the device cables to a fixed position, but the problem is still going to affect whatever is plugged directly into the iMac, though any failures there would be less expensive to replace than the longer device cables.
Anybody have any idea how to deal with this?

If you secure the cables to the case rear, parallel and as close as possible to the display's rotational axis, you'd essentially be using the same technique used to route display cables in portable Macs. Unfortunately they can't exactly coincide with the axis of rotation since it's internal, but that ought to prolong their life.
This is what I have in mind but you can probably find more elegant solutions.
Other sources: Amazon, Staples, Wal-Mart

Similar Messages

  • IMac display turns off but computer doesn't sleep.

    After upgrading to Mavericks I've noticed a problem where my iMac display will turn off but the computer will never enter into actuall sleep mode, I know this because I can constantly hear the fan humming. I have the Energy Saver settings set to sleep the display after 10 minutes and sleep the computer after 15 minutes. However even well after 15 minutes of inactivity (and the display long having turned off) I can still hear that the computer is not sleeping due to the fans still being on.
    I decided the troubleshoot the problem using a Terminal command and I was able to narrow it down to single potential cause. According to "PreventUserIdleSystemSleep" the problem stems from a "URLConnection in progress" issue. How does one go about determining what is causing the URL Connection so I can kill the prompt and see if that solves the sleeping issue?
    Here's a screen shot of the Terminal output:
    Also, if I choose "sleep" from the Apple Menu, the iMac will go to sleep as normal (fans and harddrive sleep).

    Reset the SMC and the PRAM.
    Reset the SMC
    • Shut down the computer.
    • Detach the computer's power cord.
    • Press and hold the power button for 5 seconds.
    • Release the power button.
    • Reattach the computers power cable.
    • Turn on the computer.
    Reset the PRAM
    • (Re)start the computer
    • Immediately press & hold the CommandOption+PR keys
    • Wait for two startup chimes
    • Release the keys and allow the computer to boot.
    Dah•veed

  • Intel imac display glitch and involuntary restart

    Just want to know if anyone else has experienced this specific problem, there are plenty of complaints about intel imac displays but I can't be bothered to sift through them all trying to find a match for my problem.
    A couple of months ago I was watching a video in quicktime and noticed that my screen was glitching and flashing fragmented diagonal lines - like a commodore 64 loading type thing. Then the spinning-ball came up and a force quit didn't do anything so I had to force shut down. I started up and it occured again. Then the screen went blank/black, but still lit up, and restarted without me doing anything. It also got stuck during start up the second time this occured. I panicked and ran out to buy a 500GB external drive, backed up all of my work and then re-installed mac osx from disk, archive and install job. This seemed to sort it and for the following two months it seemed OK. No sign of any problems.
    Since then I have updated from 10.4.7 to 10.4.10 (which I have suspicion that it screwed the firmware in my motu 828 firewire audio interface, costing me a £130 repair - but that's another painful story).
    It happened again tonight (the screen thing, not the motu). And the ball came up and I couldn't do anything. Force shut down, restart - screen glitching again. Then I had 2 unexpected restarts, one getting stuck in startup. Then a successful startup but accompanied by the glitchy graphics, mainly red/pink pixellated diagonal lines flickering in and out. I ran a disk first aid - no problems. Did a disk permission repair. Shut down and ran a hardware test, the first few minutes of the test the screen was still at it but then stopped glitching, hardware test found no errors (it was an extended test too). Now I'm back on it and it's all OK.
    Any suggestions/similar stories?
    When it occured 2 months ago I had the original ram that came with the imac. Now I have 2x1GB sticks of crucial ram.

    That's it! Well, that's what I have. Unfortunately, I don't know about the cause, but I don't ever recall having it prior to an update going back about a year ago. I recall an update, and that update being immediately followed by some sort of Apple Graphics something-or-other. I feel pretty certain that's when I first noticed this. I just had my LCD replaced for another reason, but I think you'll agree, it's not an LCD issue. In my case, browser activity, scrolling up or down in a page, seems to be the most common trigger. I've also seen "pieces" of the torn page, on the screen when minimizing the browser to the dock (usually Firefox, but I think I've seen it with Opera and Safari too). Is there a way to find update packages installed somewhere? I'd know it if I saw it, and I'd definitely try removing that suspect package/update.
    Message was edited by: geekboy2000 - corrected OS

  • Is there any way to turn on Video Mirroring if my iMac display is FUBARed?

    Okay, my iMac display is permanently frakked.
    Nothing else is wrong with the system (the tech assured me, anyways). Haven't yet used Firewire Target Mode to check yet.
    Regardless, I have all the proper cables and adapters--and external VGA monitor--but no way (that I know of) to turn video mirroring on.
    If I can't get an external display working, I'll be out either $900 to repair the display or $3000 for a completely new system.
    Ideas?

    Tried it and no go.
    Not sure what's wrong.
    Connect the VGA cord to the Mini-DVI-to-VGA adapter
    Connect to external monitor.
    Boot up iMac with adapter attached. Cmd-F1. Nothing.
    Boot up iMac with adapter unattached, attach after boot is finished, Cmd-F1. Nothing.
    Repeat, using a different USB port for my keyboard. Nothing (x2).
    Repeat again, using a third USB port for my keyboard. Nothing (x2).
    If I'm not doing anything wrong**, I can only conclude the techie was incorrect and there is something else besides "just the display" that is wrong with the iMac.
    **Is the monitor even connected correctly if I continuously get a "no signal" message? Or is that only because the mirroring isn't enabled?

  • Using mini display to vga cable witch acer al707 17" display

    i have bought a mini display to vga cable en put on my acer al 707 17" display on my imac 20"
    but wen is start on mac osx the screen should start automaticly.
    but is doesn't
    wen is try it ons windows vista it cannot recenize the screen
    what is the problem cannot figure it out.
    my acer al707 says that the cable is connected to my imac but not showing anything only black screen
    Message was edited by: second display doesnt start

    Hye,
    similar problem here. I have a Acer X223W that I want to use as an external monitor for my MBP15" 2.66Gzh running Snow Leopard (10.6.2) with a minidisplay to vga. The monitor doesn't get recognized ("no signal"). Any way how to solve this ? It was running fine on my previous ubuntu setup...

  • IMac display getting yellow when external display is attached?

    Hi,
    I have a problem with my IMac (27'' Mid 2010):
    I have an external TV attached via MDP->DVI->HDMI cable. When I turn on the TV, the iMac recognizes it and the iMac display turns blue shortly, then the desktop returns and my TV is ready.
    What I noticed: After the desktop returns, the iMac sometimes suddenly becomes "more yellow". Don't know exactly how to describe it, but I can clearly see how the desktop returns and then suddenly the imac display turns a little yellow, could also be that the display just gets a little darker (although the display brightness is the same as before). it's nothing that really disturbs me, and although I never saw the color return to normal it does (but I think only after rebooting the iMac)
    anything on this? anyone else noticed that?
    Message was edited by: nachdenki

    Hi nachdenki
    I've used both TV's and Monitors with my iMac over the years and that default iMac Profile has always looked yellow in comparison. Try one of those other sRGB, RGB Profiles or create a new Color Profile for the iMac's display.
    http://www.computer-darkroom.com/colorsync-display/colorsync_1.htm
    Dennis

  • My 24" iMac display suddenly shows blank screen with funny pattern

    My 24" iMac display suddenly shows blank screen with funny pattern after bootup. Anyone know the cause? http://twitpic.com/51hih7 http://twitpic.com/51hihw http://twitpic.com/51hiiv

    My 24" iMac display suddenly shows blank screen with funny pattern after bootup. Anyone know the cause? http://twitpic.com/51hih7 http://twitpic.com/51hihw http://twitpic.com/51hiiv

  • 27" imac display acting as two displays

    Can seem to find the answer to this, results lead to howtos on a dual monitor setup.
    I'd like to know if I get a 27" imac can I have the monitor act as a dual screen setup. Essentially, I would like my windows to load and act the way they do given my dual screen setup that I currently have with my macbook pro.
    I know I can resize windows and get it to mimic a dual monitor setup, sort of, but I'm trying to avoid this every time I open something new.
    Does anyone know if is this is something that I can do easily with expose and spaces?
    Thanks

    Welcome to the Apple Discussions!
    If I understand your question correctly then yes, the iMac display can be toggled back and forth between the two computers with F2. When the iMac's display is being used by the PC it is in Target Display Mode. The issue is that the iMac can only use mini-DisplayPort input from an external video source. So you would need a PC with m-DP output or a very expensive converter to convert your PC's current video output to m-DP. Then you connect the converter to the iMac with a simple m-DP to m-DP cable. These converters which are fairly new start at about US$150.
    Dah•veed

  • IMac display Mirroring to a MacBook

    Hi everyone,
    I am looking to mirror my iMac display to my macbook, as i need the extra screen space. I just got a thunder bolt cable to connect the two but i can not seem to connect them through target mode. Has anyone found a way to do this or does it only work the opposite way around?.

    Target Display mode only works to display another device's screen on an iMac. Use a product such as ScreenRecycler over a network.
    (122619)

  • Mac books Pro content viewed on a Imac display

    how do i manage to view content on my iMac- display (27" late 2009) from my Mac Book Pro (15" late 2013) after that I have connect them with the thunderbolt cable (minidisplayport to thunderbolt port)

    Target Display Mode

  • Putting iMac display to sleep, when using TV as a screen.

    I have just connected my iMac to my 42" Panasonic 1080p TV, the connection was easy and is working fine. My questions relates to putting the iMac display to sleep when using the TV as a monitor, if I am watching You Tube, Sky Player or a DVD, I intend to use my TV as the monitor. Is it possible for the iMac to puts its display to sleep, whilst leaving the TV on. I played around with this today, however was unable to manage this.
    Regards Craig

    Hi Craig
    There is no way to independently sleep either the iMac's Display or an attached Display/TV. However if in the Display Arrangement Preferences you set the attached Display or TV to be the Main Display and turn Mirroring Off, then FrontRow and the Full Screen Mode app's like, DVD player, QuickTimePlayer, etc. will black out the unused iMac display.
    Dennis

  • User Contributed Tips in Intel-based iMac Your Intel-based iMac Display

    *The following User Contributed Tips are located in the Intel-based iMac > Your Intel-based iMac Display forum:*
    a brody - Using a second Mac as a display for a first
    http://discussions.apple.com/thread.jspa?threadID=1587927
    Publish date: July 7, 2008
    *The following related tips are located in other areas of Apple Discussions:*
    See also User Tips Library

    My 20" 2.16 GHz Intel Core 2 Duo had become almost useless due to freezes and crashes- with NO crash reports in the logs.
    They were often preceeded by video glitches, so I assumed it was a bad video card- unfortunately soldered to mother board.
    Apparently, from forum postings, this is not an uncommon problem. The computer would run longer if the day was cooler, but rarely more than 10 minutes, so I suspected it was aggravated by heat.
    Then I found this post from Bodomann on an Apple Support forum:
    "Following up on my previous posting regarding my son's late model 2006 iMac that required a $900 logic board replacement:
    Turns out the problem is apparently related to a bad CPU temp sensor. I installed 'iMac Fan Control' (Google it) which reported the CPU temp always at 32 degrees Fahrenheit (obviously incorrect). The same software allowed me to adjust the CPU fan manually. After multiple trials I set the CPU speed to 2800RPM after which the system would run forever - never freezing with the dreaded grey box 'reboot me' screen. I tried several times reverting the software to default speeds and the system would always crash within 10 minutes. "
    I downloaded free Fan Control 1.2 for Imac from Derman Enterprises (they have an Intel iMac and a Mac Book/Pro version). It installs as a system preferences control panel. I cranked up all three fan speeds. The fans sped up noticeably. Horizontal lines have gone from screen (so far), no color artifacts and no crashes yet. I may have a real computer back! Hope Apple checks this out-
    The control panel also gives the temps sensors are reporting at the CPU, hard drive and DVD drive. The CPU sensor reports the CPU temp as 32 degrees F- which is clearly wrong, unless Apple has been installing little refrigerators inside.
    So thanks to Bodomann for posting- Hats off and three cheers to Derman and Cristoph for source code.
    http://www.derman.com/iMac-Fan-Control
    http://www.lobotomo.com/products/FanControl/index.html

  • When streaming a movie from an imac to apple tv, is there a way of putting the imac display off? I find it a waste having the screen on in another room. Any advice?

    When streaming a movie from an imac to apple tv, is there a way of putting the imac display off? I find it a waste having the screen on in another room. Any advice?

    No problem.
    This is a user forum so you are not addressing Apple. There's nothing to fix, that's how home-sharing works. There would be no way for the ATV to recognize your library and display content if the computer is in sleep mode.
    You can always airplay from an IOS device or use icloud if you don't wish to keep the computer on.

  • IMac - Display doesn´t work after restart

    My iMac 21 Display doesn´t work after restart. If I turn it off and 1 hour later I want use it again the iMac shows the white screen with the mac logo and then the display goes off. I connected an external display to check if the iMac was ON and with the external display I can login and do everything but the iMac Display doesn´t work .
    If I turn it off and wait 3 or 4 hours  and then turn it back on the display works OK.
    This is very strange behavior I have spent hours and hours trying to fine the solution or a similar issue but nothing so I am looking help here at apple.com
    BTW When I bougth the iMac 21 there were some spots over the display so the display was replaced by the provider. The warranty has expired by now.

    To tell you the truth, I don't know if they have to repalce the LCD panel or what they do for a bad backlight. In this reality of block or assembly replacement it probably involves repalcing the panel and not the backlight component. Don't know what it would cost. You'd have to ask that of a service center.

  • Macbook Air Immediately powers off when mini display to VGA cable plugged in.

    I have a late 2010 MBA 11 inch. I am runnig OSX Snow Leopard, all software and firmware up to date as of 08/10/2011.
    I am trying to use my mini display port to VGA cable to run an Optoma PK301 projector. Every time I plug in my mini display to VGA cable, the machine immediately powers off. No shutdown screen, no other warning signs, just instant black, as if the power was just immediately disconnected.
    I have tried plugging in the cable while the projector is plugged in and with the projector unplugged. Either way the result is the same. I have been able to start the computer with the adapter plugged in and it will power on, however the projector will no pick up any signal from my MBA.
    Anybody have any ideas on this? I have a genius bar appointment this afternoon. It is just frustrating because I am so used to everything "just working."
    Any help is appreciated.
    TE

    Hi and welcome to Discussions,
    it's avaiable in the US Apple Online Store http://store.apple.com/us/product/MB572Z/A?fnode=MTY1NDA5OQ&mco=MjkyNjI0MA
    Not sure how to get it to china though.
    Stefan

Maybe you are looking for