IMac display turns off but computer doesn't sleep.

After upgrading to Mavericks I've noticed a problem where my iMac display will turn off but the computer will never enter into actuall sleep mode, I know this because I can constantly hear the fan humming. I have the Energy Saver settings set to sleep the display after 10 minutes and sleep the computer after 15 minutes. However even well after 15 minutes of inactivity (and the display long having turned off) I can still hear that the computer is not sleeping due to the fans still being on.
I decided the troubleshoot the problem using a Terminal command and I was able to narrow it down to single potential cause. According to "PreventUserIdleSystemSleep" the problem stems from a "URLConnection in progress" issue. How does one go about determining what is causing the URL Connection so I can kill the prompt and see if that solves the sleeping issue?
Here's a screen shot of the Terminal output:
Also, if I choose "sleep" from the Apple Menu, the iMac will go to sleep as normal (fans and harddrive sleep).

Reset the SMC and the PRAM.
Reset the SMC
• Shut down the computer.
• Detach the computer's power cord.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Reattach the computers power cable.
• Turn on the computer.
Reset the PRAM
• (Re)start the computer
• Immediately press & hold the CommandOption+PR keys
• Wait for two startup chimes
• Release the keys and allow the computer to boot.
Dah•veed

Similar Messages

IMac display turning off again 10 seconds after system wake

Ever since I've updated my 27" Late 2009 iMac to Lion, I'm observing a strange behavior when waking the machine from sleep:
It wakes up normally, spinning up the harddrive, turning on the display and responding to input just fine.
Then roughly 10 seconds after the wake, the display suddenly falls asleep (turning off) but the machine itself stays awake
I can get the display back on without issue by clicking the trackpad.
This consistently happens when I wake up the iMac.
I usually put it to sleep using the Cmd-Alt-Eject keyboard shortcut. Wake on network is on, so it will have been through a few RTC wake cycles by the time I wake it up from the keyboard.
Is anybody else observing this behavior?

Still happens every day after updating to 10.7.3
Is nobody else seeing this behavior?

IMac display turns off automatically.

Hi everyone!
I have a problem with my iMac. The display automatically turns off while using the computer and I can't continue using it without forcing it going to sleep. The display turns off when the screen brightness is NOT at maximum level. If I reduce the brightness, the screen turns off. If the display it's at the maximum level, no problem, works perfect. No matter if the computer is just turned on from a cold start or if it's running since hours with high temperatures. In System Preferences there's only one option selected in the Enegy Saver section (Allow power button to sleep the computer).
Any ideas? It's really annoying working with this problem (especially at night with the brightness at maximum).
Hope somebody can help me!
(Sorry for my english).

Hi everyone!
I have a problem with my iMac. The display automatically turns off while using the computer and I can't continue using it without forcing it going to sleep. The display turns off when the screen brightness is NOT at maximum level. If I reduce the brightness, the screen turns off. If the display it's at the maximum level, no problem, works perfect. No matter if the computer is just turned on from a cold start or if it's running since hours with high temperatures. In System Preferences there's only one option selected in the Enegy Saver section (Allow power button to sleep the computer).
Any ideas? It's really annoying working with this problem (especially at night with the brightness at maximum).
Hope somebody can help me!
(Sorry for my english).

Windows 8.1 Screen Locking at Display Turn Off (instead of only at Sleep)

Hi All,
I am having this issue with clients running Windows 8.1 Enterprise, which we are planning to deploy later on this summer.
We currently have a GPO setup for managing the power settings on our staff computers:
This GPO sets computers to sleep after 1 hour, but turn off the monitor after 5 minutes of inactivity
On our Windows 7 systems, the policy applies correctly and if our staff uses their computer before 60 minutes of inactvity (before they go to sleep),
the screens will just turn back on without prompting for login.
I have noticed however on our Windows 8.1 test computers, in the same OU, which receive this policy, that after 5 minutes when the screen goes off, if a staff member attempts to use their computer they will be prompted for a password even though the
unit was not in sleep mode.
Further more, I've noticed that on the Windows 8.1 Systems, I am able to override the "Require a Password on Wakeup" setting using the metro interface, as pictured below (the setting does change in power options as seen below), and does stay in
the No setting even if I run gupdate and reboot.
Any idea how to keep the Require Password for waking up, but not just for computer with the screen powered down?
(I should also not screen savers are not being used)

Hi,
You can tried also set the item Sleep: After 60 min to see what's going on.
On my laptop, once I configure this, the display turns off without lock the computer.
Kate Li
TechNet Community Support

Display turn black, but computer still running

I woke my computer up from sleep mode to check my am email of mine. As I was about to log-in to my email online my display turned black. I thought the computer shut down completely, but I could still hear it running. I just shut down my computer with the button on the back of the diplay and then started it up again.
My computer seems fine now, but I was just wondering why that happened? I've had my computer for a few months now and I've never had this problem. I just installed new memory about a week ago..might that have something to do with this happening?
Thanks.
17"intel duo, 1.8GHz, 1.5GB (early 2006) Mac OS X (10.4.8)

Intermittent faults such as that are difficult to diagnose at distance so the best thing is to get Apple / your supplier to check it over. Apart from the RAM there is nothing you can do to the electrical / mechanical side of an iMac. If it were a software problem it would show more regularly.
If you haven't already purchased it get AppleCare, that will cover the machine for 3 years from the ORIGINAL purchase date and as you are having problems would be a worthwhile investment. You must purchase it before the original 1 years warranty expires.
chris

Imac monitor turns off but the imac continues to operate

I have problem with my imac 27 "i5 2.7 ghz 4gb of ram with video card AMD Radeon HD 6770M 512 MB bought used not under warranty.
In practice, for the first 2 days no problem but then suddenly began to fade with the monitor frequency is not standardized.
I am sure that is not to shut down the mac because the mac but the monitor continues to make sounds when you turn off.
I've tried both to reset the PRAM is to initialize it with os x 10.8 (2 times with updates) and also installing windows 8 but nothing for the first few days but then here goes the problem recur please help me.

Sound like a hardware issue but this is tough to tell. Run Apple's Hardware Test in extended mode at least 2-3 times. If errors appear you have confirmed a hardware issue and the machine needs to go in for service.

Display turns off, but turns bac on when i walk in front of it?

In order to save my battery, the display goes black after a certain amount of time. That is normal. The thing that is weird is whenever the screen is dark and then I walk past it or sit down in front of my computer, it turns back on without me touching anything... could someone have hacked into my webcam? I can't think of anything else that would make it motion sensitive like that. If anyone has any ideas of why this might be and how I can fix it more importantly please let me know. I am kind of freaked out by this. It hasn't always done this, only the past few days.
MacBook Mac OS X (10.4.7)

No, the built in isight light is not on. i am using an external mouse and maybe thats it. ill try and see what happens when i disconnect the mouse.

Close Firefox, restart it says firefox can not start - already running, tried deleting the parent.lock it doesn't exist. I try to turn off my computer it says WidgiBho needs to close, I tell it to close but computer never shuts down

close Firefox, restart it says firefox can not start - already running, tried deleting the parent.lock it doesn't exist. I try to turn off my computer it says WidgiBho needs to close, I tell it to close but computer never shuts down

Did you try to wait a bit longer before restarting Firefox to give Firefox more time to close down completely?
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs

My ipad2 is turned on but displays nothing it just shows a blank screen like as though its turned off but it isn't

my ipad2 screen does not display anything. I've tried reseting it and it worked the first 2 times after that it just says on my itunes ipad is in recovery..... and then it comes out with the same result no screen display.Its like as though its turned off but its not. what do I do.I threw away the receipt and box so sending it back to apple can be checked off the list any ideas as to how to fix this will be very much appreciated.AGAIN I EMPHASIZE I HAVE TRIED RESETING IT COUNTLESS TIMES THAT IS HOLDING DOWN THE HOME BUTTON AND ON AND OFF BUTTON SIMULTANEOUSLY.

If a Reset is not working for you... Then...
Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

Display Turns Off After Opening Computer

I have a very annoying problem of my display turning off and not turning on until I restart my Macbook Pro by holding down the power button.
For example, I will close my computer (power cord not plugged in) and it will go to sleep. If for some reason the computer turns on while it is still closed (this happens when I pick it up/move it around sometimes) and I then open the computer, the display will be on momentarily and then turn off leaving me with a black screen. The only way to turn the display on again is to restart my computer.
Another example: I might close the computer with the power cord in. I will then unplug the computer (still closed) and walk somewhere, then open the computer. The display will be on for a few seconds and then turn off, leaving me again to restart my computer.
The third example is the worst. Sometimes with the power cord still in, sometimes with no power cord, the display will just be blank when I open the computer.
With all of the above occurrences, I know the computer is running because I can see the caps lock key light change when I press it.
Does this make any sense? Please help me, I will be going to college on Tuesday and I would really like to have it so I don't have to restart my computer every time before class.
My display was not always this way, it has just been like this for a few months.

Im surfing this kinda of problemes. Its insteresting your computer turn on the screen after restart, but there no much good news for us in here: http://discussions.apple.com/thread.jspa?threadID=1478474&tstart=0

In my ipad mini sound is there but somehow display turned off....please help...how to turn on the display

In my ipad mini sound is there but somehow display turned off....please help...how to turn on the display

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

There's a black and white striped glitch on the left side of my screen on my Macbook Air! Its happened before and has been an easy fix, usually just restart or turn off my computer but don't know what else to do. Is there anything I can try now?

There's a black and white striped glitch on the left side of my screen on my Macbook Air! Its happened before and has been an easy fix, usually just restart or turn off my computer but don't know what else to do. Is there anything I can try now? I wont be able to make it to the Apple store until tomorow and would prefer if there was something I could do that didnt cost money, my computers very new and I really need help.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I suggest that you try to repair the phone software using PC Companion..
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

HT1491 Hi - I am trying to change my payment information but I keep getting the message that my session has timed out. I have turned my phone off but that doesn't seem to help.

Hi - I am trying to change my payment information but I keep getting the message that my session has timed out. I have turned my phone off but that doesn't seem to help.
Does anyone know what I need to do?
Thanks. :-)

What are the exact error codes that are appearing when trying to update?
Have the steps for troubleshooting those errors as listed in the article from which the question was posted been tried?

HT204406 Although I have subscribed to ITunes Match my ipad setting only states under Settings Music, to subscribe to iTunes Match. But i have subscribed. i have played the downloaded songs from the icloud, too, and when i turn off my computer, the ipad m

I subscribed to Music Match with iTunes and yet my ipad settings for Music only still has the option to subscribe, and therefore I cannot click on an option to Activagte iTunes Match, since it is not there. I have all the right number of songs from the icloud showing up in my ipad now, and I have played a few, but when I tried to turn off the computer, it showed a field stating that my ipad music would stop playing too, and it did. I thought this might have something to do with homesharing, but this I thought was something separate from iCloud.
There is something wrong, but I don't understand what. It has just synced, but the problem persists.

Home sharing is separate from iTunes Match. Sounds like you were playing music using home sharing, which turned off when you turned off your computer.
Open iTunes on your computer and go to the Store menu. Confirm that there is a setting called Turn Off iTunes Match. That will confirm that iTunes Match is enabled on your computer. Then check to see what Apple ID you subscribed to iTunes Match with. It will be the ID in Store>View Account (in parentheses).
On your iPad, confirm that you are signed in with this same ID in Settings>iTunes & App Store (at the top). If so, you should see an iTunes Match setting listed with an on/off slider. Slide it on to enable iTunes Match on your iPad.

My imac G5 turns off on mi then dont want to turn back on at all but after one day turns on mormaly then turns back off again

my imac G5 turns off on mi and dont want to turn back on at all but nex day tuns on normaly then tuns back off again

It could be several possible issues.
1) Your G5 iMac could be overheating. Depending on which model, you might be able to open the back by yourself (not on an iSight model), and using a can of compressed air, youcould blow the dust out of it.
2) The power supply could be going bad.
3) The hard drive could be going bad.
There could be several others.
If you have the original, came with the iMac when purchased new Install Disks, you can try running the Apple Hardware Test to see if it can determine any hardware issues. It can't always find the problem.
Good luck.

IMac display turns off but computer doesn't sleep.

Similar Messages

Maybe you are looking for