Imac does not detect external vga display

Please help with connecting external vga display to an imac 21.5'', late 2012, OS X 10.8.5 via Mini DisplayPort to VGA adapter.
I have connected an external monitor (Fujitsu Siemens) to the thunderbolt port of the imac using a Mini DisplayPort to VGA adapter. The imac does not detect the external monitor. I have followed all instructions and suggestions I could find at Apple Support Communities without success.
The monitor is in perfectly good working order as it has no problem connecting and performing flawlessly with a dell windows laptop. The imac, connected via the Mini DisplayPort to VGA adapter to the D-Sub connector of a Samsung smart TV, also worked perfectly.
To add insult to injury, occasionally, when restarting the iMac with the external vga display connected and powered on, the iMac screen starts intermittently turning blue for a brief second or so and resuming back to normal. The frequency of 'blueing' is once in 2-3 seconds. This particular rather disturbing problem, luckily ceases when the external display is switched off.
Any advice and help with resolving the above connection problems will be gratefully appreciated.
Thank you
ghogoh

I am having the same issue. Hope Apple can fix this soon!!!

Similar Messages

Thinkpad Edge S430 - Windows does not detect external display connected via HDMI

On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
Hence I think that it's very likely that this is a Windows-specific driver issue.
Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.

skn2011 wrote:
My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
Are you using the Apple adaptor or a 3rd party

IMac does not recognize external monitor using Mini Display Port to HDMI

Hello,
I have been trying to get an external monitor (HDTV) set up for use with my iMac using a Mini Display Port to HDMI cable I just got. However, when I connect it to my iMac's mini display port, the imac's screen goes black for about a second, then returns, but it does not detect the external display. The other display is just showing a "no signal" message on the screen.
I have restarted, reset PRAM, connected and disconnected the cable several times, tried changing the resolution on the imac, plugged in/out the other display, and clicked the "detect displays" button using the option key in display preferences, but nothing has worked.
I am using an early 2009 iMac running Mavericks.
I've been using the AirParrot app, but it's horrible for video and a little slow.
Can anyone please help sort the issue here? I feel like ive exhausted everything that I know to do.
Thanks.

I am having the same issue. Hope Apple can fix this soon!!!

Probook 4520s does not detect external monitor on Windows 8.1

I have problem, when I connect my laptop on external monitor LG Flatron W 2240. Laptop does not detect. I make conection with VGA cable (cable checked and it works). I try to reinstall my grphic driver, but it does'nt help. I use graphic driver for Windows 7 Professional 64 bit. I had Windows 8 and the external monitor worked fine, but now I have only black screen on monitor LG.

@Rebeca1986
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Imac does not see external speakers

Running an iMac with 10.8.2 and it does not see external Bose speakers

Got the same issue here; it has worked for some time, but then suddenly it stopped.
: (

My imac does not detect my iphone

I just baught imac and i was successfull in syncing my Ipad. with the same cable i have tried to sync my iphone 4s but just does not detect my iphone in itunes.
i have tried restarting my Iphone and my imac but just doen not dectect. I have also tried to put the usb port in all the ports but it still doesn not detect.

Try here.   http://support.apple.com/kb/ts1538 < -- for Windows
http://support.apple.com/kb/ts1591    <--- for Mac
Carolyn

My iMac does not recognize external hard drive

My iMac does not recognize my external hard drive. Disk utility recognizes it and a test of the hard drive does not review any error. I use the hard drive as a back up for the time machine. This problem comes and goes. It comes when I turn off and turn on the computer, with the hard drive attached.
Please help.
Insightful

can be this reasons
01 , you have problem with connection ? check the port if you can find any problems physically .
02. if not try to change the cable and with connection ,
03. may be its good idea to check the hard drive with another mac ?(if you have )
Did you note any diference of sound from Hard Drive ? listen to it that carefully to note some unusual sound comes when the hard drive works.
check this link this might usefull: http://www.youtube.com/watch?v=JjgOSxKy-FQ

MacBook Pro 2011 does not detect external monitor

I have a MacBook Pro 13'' early 2011 runing Lion 1.7.2.
I have an HP v185ws external monitor connected via an Apple Thunderbolt to VGA connector.
Since last month's Thunderbolt firmware update, my external monitor is no longer detected.
Does anybody has a solution to this problem?
Thanks.

I have a problem connecting external display (Dell U2311H) to my 13" MacBook Pro (Early 2011).
I use Tecklink Mini DasplayPort to HDMI adapter (http://www.techlink.uk.com/products/wires_cables/wiresmedia/wiresmedia_media/wir esmedia_mini_displayport_plug_to_hdmi_plug), but since U2311H doesn't have HDMI input, I also use Manhattan DisplayPort to HDMI Adapter (http://www.manhattan-products.com/en-US/products/8101-displayport-adapter).
And nothing.
The display is not detected, no picture or even external monitor presence at all.
I even reset PRAM, and installed 10.8.2 Supplementary update.
I also plugged and unplugged all I could, with no luck.
As I can see on Apple discussion, it is a common problem with 2011 MacBook Pro's.
It seems like the problem is in Thundebolt port, it somehow does not work properly.

My imac will not detect external monitor after recent update. Is there a way to fix this?

I have a VGA monitor plugged in to my imac using the VGA adapter to the mini-DVI. All was working well. Since I updated over the weekend, the computer will not detect the monitor.
Any ideas how to fix this?

Pcantin wrote:
I have tried another VGA monitor and that failed as well. Since you don't think the update was the cause, it may be that the adapter I am using decided to call it quits. I will see if I can find another and test that out.
I will look into the external drive idea as well.
Thanks for your help on this.
I didn't think about the adaptor, but you should at least visually inspect both the adaptor and the cable at both ends. If one or more pins got bent even slightly the connection might fail. The cables can also fail internally. Replacing the adaptor and cable may be the quickest thing to do initially. If you want to try to save money, first replace the adaptor, and if the problem persists, then go replace the cable (or vice versa).

MacBook Pro Mid2012 does not detect external monitor

After i upgraded to MAVERICKS now using my " BELKIN HDMI TO THUNDERBOLT ADAPTER "
when i connect it to TV the monitor flashes black and nothing happens no signal on TV go to settings display and sound there is nothing and when i disconnect HDMI it flashes black again ,,, help please ..
i doent know if its from MAVERICKS OR HDMI CONVERTER OR SMT TV OR THUNDERBOLT PORT

I have a problem connecting external display (Dell U2311H) to my 13" MacBook Pro (Early 2011).
I use Tecklink Mini DasplayPort to HDMI adapter (http://www.techlink.uk.com/products/wires_cables/wiresmedia/wiresmedia_media/wir esmedia_mini_displayport_plug_to_hdmi_plug), but since U2311H doesn't have HDMI input, I also use Manhattan DisplayPort to HDMI Adapter (http://www.manhattan-products.com/en-US/products/8101-displayport-adapter).
And nothing.
The display is not detected, no picture or even external monitor presence at all.
I even reset PRAM, and installed 10.8.2 Supplementary update.
I also plugged and unplugged all I could, with no luck.
As I can see on Apple discussion, it is a common problem with 2011 MacBook Pro's.
It seems like the problem is in Thundebolt port, it somehow does not work properly.

Mac mini does not detect apple cinema display

Hello,
I have bought new mac mini (late 2012) with OSX 10.9.4 installed on it.
I have apple cinema display (20"), model: A1038 from before. When i turned on mac mini the display was not detected.
I also have one Samsung monitor which was detected without problems.
I tried next steps already:
- connect only apple cinema display with HDMI to DVI and turn on coomputer
- connect only apple cinema display with mini displayport to DVI and turn on coomputer
- connect both displays, went to System preferences -> display and click on 2Detect display"
nothing works
Specs of my mac mini:
mac mini (late 2012)
processor: 2.5GHz Intel Core i5
OSX: 10.9.4
graphics: Intel HD Graphics 4000
Have anyone idea what is wrong?
Thanks!
most22

Hi there most22,
You may find the troubleshooting steps in the article below helpful.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
-Griff W.

IMac is not detecting external USB hard drive

I restored my iMac (mid 2011 - i5 quadcore - 1TB - 16gb Ram - Lion 10.7.3) and my Macbook Pro (2010 Core 2 - 8gb Ram - Lion 10.7.3) I have a 1TB Toshiba external portable USB 3.0 hard drive.
The drive connects and recognizes quickly and works without any issues on the MBP, on the iMac on the other hand it will not detect in system profile or disk utility. Occasionally when plugged in the drive will spin up and stay powered on, other times on plug in, the indicator light will flash quickly and power off. The drive is fairly new, lightly used, and I repeat has NO issues with the MBP. The iMac will read flash drives and USB devices without issue except for this external hard drive. Also when I restart if the external drive is plugged it it will hang until I remove it. Drive is partitioned 86gb in MS Dos with Master Boot Record profile, and the remaining space is partition 2 formated as Mac journaled.
I am up to date on all updates from apple, and at a complete loss as to what to do next.
Thanks in advance for all your help

What version of firmware are you running on the 802.11ac?
There is a 7.7.1 update with USB fixes - http://support.apple.com/kb/DL1665
After my update to 7.7.1, I still cannot see the Seagate 3TB HDD.
The disk works on a 2nd Gen 802.11n Extreme.
This is

Windows 10 upgrade does not detect external hdmi monitor

Hi I have just upgraded my laptop yoga 2 11 to windows 10.I use an external hdmi monitor at the office desk with the previous windows 8.1 and no problems, but once I upgraded two hours ago to windows 10I my external monitor is not detected by windows10. what should i do?? Best regards, Martin

I have ENVY 15 K101TX; and I'm facing the same problem after upgrading to WIN10.Whenever I try to shut down the Laptop, it just doesn't shutdown completely. The screen goes blank but the power light and fan stays on. I have to press & hold to shut down the laptop. And we all know it's not a solution.And it also doesn't come back after sleep mode. I have to force shut down and start it again.I have checked all the power options and have tried all the things possible.Any one?

Lightroom does not detect external hard drive

I am a newcomer to Lightroom and I'm trying to move my photos (25,000+) from my laptop to external hard drive. I've already copied the catalog over there (following online video tutorial by David Marx). I thought the way to move the actual photos was to drag and drop them using the left panel within Lightroom. But no matter what I do, Lightroom does not show my external hd (LaCie), so I can't drag/drop. Am I right that this is the way to do it?
Strangely, Lightroom does "see" the LaCie when I open the "Import" function.
Thanks for any help.
Dylan

Is your LaCie formatted? Do you see it in your OS?
--Yes.
If yes, try the following:
In your OS move one folder to your LaCie.
Open LR. In the folders panel there should be a question mark besides the folder you just moved - at the old location!
Right-click this folder and point LR to the new location on the LaCie.
--So far, so good. But now LR sees LaCie as a folder, not a drive. And none of the folders that are already on the LaCie are visible.
If Lr lets you do this you're fine and from then on you can use the drag-and-drop method within LR.
Or, alternatively you can move all the other folders in your OS and then point LR to the new location. It might be a bit faster to make the move in your OS.
--I'm holding off on this step for now...

[Solved] Xrandr does not detect external monitor

I recently just installed Arch linux on my laptop and decided to install the catalyst driver as well. I followed all the instructions on how to install catalyst and when I try to use the xrandr command it does not show my second monitor. I am using i3wm on the latest kernel and catalyst driver. I can also see a x cursor when I move my mouse to my other screen but it does show the i3bar or I cant drag a window to the other screen
Here is my xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "aticonfig-Screen[0]-1" Above "aticonfig-Screen[0]-0"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:0:1:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-1"
Driver "fglrx"
BusID "PCI:0:1:0"
Screen 1
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-1"
Device "aticonfig-Device[0]-1"
Monitor "aticonfig-Monitor[0]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
what xrandr -q shows
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 1920 x 1920
LVDS connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.00*+
1360x768 60.00
1280x768 60.00
1280x720 60.00
1024x768 60.00
1024x600 60.00
800x600 60.00
800x480 60.00
640x480 60.00
DFP1 disconnected (normal left inverted right x axis y axis)
CRT1 disconnected (normal left inverted right x axis y axis)
Last edited by Green (2014-09-16 01:00:22)

Never mind I just needed to delete my xorg.conf and regenerate it by
# aticonfig --initial

Imac does not detect external vga display

Similar Messages

Maybe you are looking for