IMac does not see Nikon D300 camera as drive in finder

Please help. I bought this iMac for processing and printing my photography. In Windows 7 I can just plug my camera into the usb port and it sees the camera and the folder containing the photos I want to download onto the hard drive. I do the same thing on the iMac and I don't see the camera or folder anywhere. The LED on the camera flashes as if something is being read, but nothing pops up on the desktop or the finder window. What am I missing? Thanks for any help.

Have you checked your Finder Preferences (General tab) that external disks, etc are all checked to show on desktop? Also, have you checked your iPhoto Preferences to see what the setting is for "connecting camera opens..."? And, lastly, have you simply tried to use a card reader with your camera card? That is what I do; I simply want the card icon to show on my desktop; this method also saves the camera's batteries. Some camera brands do present a few problems (my Canon does) - the easy workaround is using a card reader.

Similar Messages

My iMac does not see the new Toshiba external drive in Finder or Disk Utility. How can I get it to see the drive?

My iMac does not see the new Toshiba external drive in Finder or Disk Utility. How can I get it to see the drive?

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive is malfunctioning.

After upgrading to Mavericks my iMac does not see Sony camcorder in iMovie anymore. It still works on MacBook, so nothing wrong with camera or connections.

After upgrading to Mavericks my iMac does not see my Sony camcorder anymore. I tried the new iMovie as well as the old version 9.0.9, which is still in Applications. I checked the camcorder and connections in iMovie on my MacBook (not upgraded) and that still functions properly, so the problem does not seem to be in iMovie, old or new, or in camcorder and connection.
Anybody with the same problem or a solution?
Thanks mbkom

Try this

IMac does not 'see' Sony DCR PC5E when connected

My iMac does not see a SONY DCR 5E videocam when connected using 4pin to USB cable, any ideas?

It depends on what Mac you have and what version of iMovie. You may need to use Firewire.
iMovie 11 - cameras supported:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
iMovie 9 - cameras supported:
http://support.apple.com/kb/HT3290?viewlocale=en_US
iMovie 8 Camcorders supported:
http://support.apple.com/kb/HT1014
Digital camera RAW formats supported by OS X Lion:
http://support.apple.com/kb/HT4757?viewlocale=en_US
Digital camera RAW formats supported by OS X Snow Leopard:
http://support.apple.com/kb/HT3825?viewlocale=en_US

IMac does not see my external HD...but my MacBook Air does

I have a Toshiba 1TB HD that I partitioned into iMac and PC. I run my backup on it with no problems. Then I got a Time Capsule and set it up. Now my iMac does not see my HD any more. But my Mac Book Air picks it up. You can see the 2 partitions on the MBA. I also cant see it in my Disk Utilities and "Mount" is not clickable. I tried to use different USB ports as well as different USB cables.

What to do if your computer won't recognize a FireWire or USB device...
If the issue persists, try these steps:
   1. Shut down the computer.
   2. Disconnect all devices and all other cables, except the keyboard and mouse cable(s).
   3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
   4. Plug the computer back in and turn it on.
   5. Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.
http://support.apple.com/kb/HT1317

Trying to see DVD drive through DVD sharing. iMac does not see MacBook. DVD sharing is ON.

I have an iMac with a non-working DVD drive and I'm trying to install Snow Leopard from my MacBook's DVD drive. I have turned DVD Sharing ON but the iMac does not see the DVD drive in Finder's Shared Devices. I have tried FireWire, LAN through TimeCapsule and WiFi. Am I missing a step?
The iMac and MacBook are both late 2007 purchases and have 10.5.8.
Thanks for any help.

Two commands you need to type in terminal on the computer that has the dead drive.
Disk sharing like the macbook air does is one of those things that's included in all OS X's on all computers, but that is not enabled. (I think it's cause apple doesn't want to have to support it on more devices that they absolutely have to)
So here's how you enable it.
In your Utilities Folder, open Terminal
copy and paste each line:
sudo -s
*type your password*
defaults write com.apple.NetworkBrowser EnableODiskBrowsing -bool true defaults write
com.apple.NetworkBrowser ODSSupported -bool true
shutdown -r now
Okee dokee... That last command will restart your computer, then you're off to the races!

Audition CC does not see the CD in the drive when I try to burn

Audition CC does not see the CD in the drive when I try to burn CD - says no media found
Windows 8 sees it OK

What folders are you talking about? Photos folders? Email folders?

Mac Pro early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb and Raid card Raid5 them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

On my Mac Pro, early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb. The Raid card Raid 5ed them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

You don't see drives when using a hardware RAID only the volumes.
WD Green are not suitable for hardware RAID (or software RAID for that matter).
USB2 and TimeMachine are a disaster waiting to happen. I've used SATA (internal) and eSATA (using SATA PCIe cards) trouble-free.
I can't say I begin to understand your use or "choosing the install drive for the backup"
Install what?
You don't load TimeMachine. Maybe seems minor but that is not how to describe the behavior of software.
You read FAQ and How To http://www.apple.com/support/timemachine
Time Machine’s Gory Details:
https://www.apple.com/support/timemachine/
TimeMachine 101
https://support.apple.com/kb/HT1427
Lion Recovry & TimeMachine
http://www.apple.com/support/lion/installrecovery/
http://www.apple.com/support/lion/
How To Restore Your System
http://pondini.org/TM/14.htmlMac OS X v10.7 Lion
Pondini's Blog: Time Machine - Troubleshooting -- B5. Would you like to inherit (or re-use) the backup . . . ?

Imac does not see external speakers

Running an iMac with 10.8.2 and it does not see external Bose speakers

Got the same issue here; it has worked for some time, but then suddenly it stopped.
: (

MacPro (2014) does not see Nikon Coolscan

Last week I got my new MacPro and connected all stuff and copied from old MacPro.
My Nikon scanner (FireWire 400) came as last one and was connectes using a FW 4400-800 cable
in the Apple FW adapter.
The new Mac does not recognize the scanner. I tried all old FireWire tricks and used a shorter
cable. It does not work. I used a Mac Mini (also on Maverics) with the same result. I tried
other software (VueScan) same result as with Silverfast.
I know from the past that FW always gave problems so most of my stuff was already USB
and with the new Mac I changed my external drives to a Promise Pegasus.
I guess it is a software problem in Mavericks but I don't know what apple could have changed. I cannot
ask Nikon as they stopped with this scanner some years back (Super Coolscan 9000ED)
It is very much disappointing as this filmscanner is amongst the best and buying one today
(newish) still cost about € 6.000,-!!
The Mac is used very much amongst pro photographers and I'm amazed about this as
the pro world uses this scanner a lot.
help!
thx
Jan Tromp

As I wrote that didn't work either. It would not have realy solved my problem as Silverfast
is the more pro software. I tried to see if it was the software, well it isn't
it seem to be the FW connection.
Thx for replying!
Jan

Cannot Wi-Fi Sync iPad; Appears to see iMac but iMac does not see the iPad

Like many, I have upgraded my iPad (1st Gen) to iOS 5 and for the most part, it's been an easy transistion to learn the new features. However, I've not been able to overcome a Wi-Fi Sync issue.
The iPad does recognize that it can Wi-Fi Sync with my iMac.
When it was connected via cable, I had already selected the "Sync with this [iOS device] over Wi-Fi" Option in iTunes then clicked "Apply."
Under Settings > General > iTunes Sync on my iPad, the "Sync Now" button is grey when I connect to an alternate Wi-Fi network in our house, but when I am on the same Wi-Fi network as my computer, through an Apple Airport Extreme Basestation, the "Sync Now" button becomes actively black as it if recognizes my iMac, but it does not show up under iTunes to sync.
I connected the iPad to an alternate computer which is linked to iPhone running iOS 5 on the alternate Wi-Fi Network I spoke of earlier and through which we succesfully Wi-Fi Synced, but when my iPad was linked to this same computer (connected first by cable to enable "Sync with this [iOS device] over Wi-Fi" Option in iTunes first, it still would not show my iPad. And this time, not even my iPad would see the computer when on the same network, yet I could also see the iPhone mentioned which was upstairs.
I have tried following the steps in this Help Page (http://support.apple.com/kb/TS4062) but without any change. The only thing I haven't followed to the letter is restarting my router. I did tell my Airport Basestation to restart via the Airport Utility.
Has anyone else yet experienced this issue and been able to resolve it? Please share any insight.

When one device can't see another via Bonjour, it suggests a problem with how the network or the devices are handling "multicast" packets. Handling multicasts is tricky on Wi-Fi. Is there any way you can temporarily plug the iMac into the LAN port of the base station via an Ethernet cable, and try the sync that way? If that works, then it's a clear indication of multicast problems on your network.
Apple is usually very good about making sure multicasts work reliably on AirPort base stations and all Macs and iOS client devices. It would be interesting to know which generation of AirPort Extreme you have, what firmware version you're running on it, exactly which wireless security mode you're using (for instance, WPA2 "mixed mode", where both WPA2-style AES-CCMP and original WPA-style TKIP encryption are available, is trickier for multicasts because multicasts have to use a different cipher and key. "WEP TSN" is also tricky for similar reasons). Oh, and what you have your "multicast rate" set to on your base station.

My iMac does not see the windows machines on the network (and vice versa)

I'm runningOS X 10.8.2 on my iMac which attachs to the office network using Wi-Fi.
It's on the right network (it's not attaching to the Wi-Fi router in the bulding next door) - I've checked the SSID and it's also being issued the right IP address by the router.
I can ping the Windows machines and they can ping my iMac. The issue is that I simply CANNOT share files back and forth.
At seemingly randoms times, I can, and I have File Sharing enabled in Sharing (remember, and RANDOM times I CAN see the Windows machines and they can see the iMac...BUT, it's random).
Thoughts?

zahidfh, Welcome to the discussion area!
More than likely your area has very significant RF interference in channels 1-6. The interference is making those channels unusable by you.
KB 58543, AirPort: Potential sources of interference
Also, is this a forum where Apple technicians reply to queries??
Take a moment to read the "Help & Terms of Use" for this area and you will discover that this area is a user-to-user discussion area. There is no guarantee that anyone from Apple will ever read any of these threads.
I was unable to find any area where I could post a direct help request regarding this!
That is because one does not exist. If you want to communicate with Apple about a problem or issue you must call them.

My new iMac does not see my last iMac backup in Time Machine

I just got a new iMac and I wanted to get my files from the time machine back up of my old iMac. Migration assistant did not see my iMac backup. It sees my Macbook backups, but not my iMac. My old iMac was running Yosemite Beta and the new one runs 10.9.5. Is the OS difference the issue?

Since it's a new machine, contact Apple's Support and let them deal with the problem. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you might be eligible for an onsite repair since yours is a desktop machine (depends on where you're located). BTW, the AppleCare Protection Plan's the best warranty policy available for desktop machines. Get it if you don't have it before contacting Apple.
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

Time Machine does not see a Time Capsule external drive

Time Machine will not recognize an external drive attached to my Time Capsule, even though it did so last week. How do I get it working again?
Until last week, I was using Time Machine to back up to a Verbatim 2 TB drive attached to a Time Capsule. It occasionally hung, requiring me to restart the Time Capsule in order to get backups working again, so I bought a Seagate 2 TB drive to replace the Verbatim in case the problem was a flaky drive. Now I can't get Time Machine to recognize either disk when the disk is attached to the Time Capsule.
Both disks are formatted in Mac OS Extended (Journaled). Both disks work correctly when I attach them directly to my Mac. When I attach either disk to the Time Capsule, Airport Utility shows the external drive, shows that sharing is enabled, and I can even mount the Time Capsule with Finder and see the external disk with Finder. But when I try to Select Disk in Time Machine Preferences, whether or not the Time Capsule is mounted with Finder, Time Machine Preferences doesn't see the disk—the only choices of disk are My User Account on the Time Capsule, and Other Time Capsule.
Restarting my Mac and restarting the Time Capsule does not help. Software and firmware updates are (and have been) up to date. I'm running OS X Mavericks 10.9.2 and Time Capsule version 7.6.4.
To reiterate, this was working a week ago. How do I get it working again?

If nothing in your configuration has changed, you can try plugging the disks one at a time directly into your mac, run Disk Utility and perform a Repair Disk. If any errors are displayed, rerun Repair Disk until there are none. Then try them back on the Time Capsule.

ACR does not see D70 in Camera calibrate profiles

I shoot photos with a Nikon D2X and my wife uses a Nikon D70. If I open a D70 raw file, and then go to camera calibration, the profiles available are for various standard profiles and D2X profiles. The D70 profiles do not show in the drop down list. All of the profiles have been downloaded, from Adobe, and installed.
If I open a D2X raw file, the standard and D2X profiles are shown in the dropdown box.
Have I missed something in the installation? Do the profiles have to be loaded somehow?
We are using PhotoShop CS4 on 64 bit and 32 bit systems with ACR 5.2. Bothe the 32 bit and 64 bit Photoshop have the same result.
Thanks, Dennis Edson

You installation is working correctly. ALL the profiles (including the "standard" ones) you see are for just your current camera model.
The "D2X" in some of the profile names are part of the name of the Nikon picture style they emulate.

IMac does not see Nikon D300 camera as drive in finder

Similar Messages

Maybe you are looking for