IMac does't go into sleepmode, when an iOS-device is connected via usb

Hi! My iMac 27" isn't going in sleepmode, when an iOS-device is connected via usb for charging. "HandleUSBMuxDictionary client 0x101803420-iTunes/com.apple.iTunes using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21" is the entry that shows up in console.
Does anybody know, what that means and what I can do to get my sleepmode back?
Sorry for my english, I'm from germany.

Hi Dennis,
thx for your reply.
It would be a way to use a charger instead of the iMac (I already do so), but then I have to go two ways, one for syncing and one for charging. I don't think, that this was Apples intention. The ease of use is "a part" of their products and going these two ways instead of one can't be something Apple wants.
So I hope, that either there is another way or there will be an update for iTunes to fix this.
Once again thx.
Regards,
Stefan

Similar Messages

How do I stop my imac OSX from automatically opening itunes 10 when a new device is attached via USB.

How do I stop my imac OSX from automatically opening itunes 10 when a new device is attached via USB? The devices do not pop up in itunes under a sync category, so I can't turn them off one by one, nor would I want to.
I apologize if this has been answered, but I couldn't find the solution for this problem.

Thanks for the reply but it didn't solve the problem unfortunately and I didn't think it would as I only downloaded Firefox for the first time a few days ago even though I have had this problem for over six months using IE.
Anything else that you think is worth a shot?

How do I send the iPhoto events from my iMac to my iPad when the two devices are connected by USB port?

I connected my iPad to my iMac via USB port. I want to send my iPhoto events/files to my iPad. I cannot find the right instructions. It appears to me that the iPad sync only transmits data from the iPad to the iMac, but I am trying to send iPhotos from the iMac to the iPad. Do I use export or sync?

You need to use iTunes to sync photos.
Connect your iPad to your computer. Launch iTunes. Select Photos from the menu. Click the Sync button bottom right side of the iTunes window.
Syncing iPad, iPhone, or iPod touch with iTunes
iPad User Guide

Audiobook does not show on other computer and IOS devices.

Audiobook purchased on iMac does not show on other computer and IOS devices. Music i buy in the store does show up. settings have been checked and books

This has nothing to do with iCloud. Try one of the iTunes forums: https://discussions.apple.com/community/itunes

Why does Safari go into limbo when I try to search for some things?

     Why does Safari go into limbo when I try to search for some things? I start to enter something in the search window. I get a drop down with suggestion I choose one and it pops up in my search window but just turns a color and does nothing!
    If I quit Safari and bring it back up, then enter the exact same line it's fine. This is just one of the many problems I've been
having with Safari since I installed Yosemite.
     Has anyone got any suggestions or is anyone having the same problem. Is there a way to maybe force my MacBook pro to reinstall Safari or possibly all of Yosemite. I seem to be having a lot of problems and judging by the responses I've received (That would be None) I must be the only one having any problem at all withYosemite. Not sure what to do.
     Any help or suggestions would be great
     Ron

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

Mac pro does not recognize ipad device when connected via usb port, suggestions?

mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions? itunes 10.7

Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
The most likely issue: Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. Amy I just out of luck?

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. The drive does not show on my monitor. Any suggestions or my I just out of luck?

Do you have Finder Preferences set to show other disks? Nothing wil show on the Desltop until you make that change:

I have a canon mf5940dn, it is connected via USB to my macbook air, and yet, when i want to print smith, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

I have a canon printer mf5940dn, it is connected via USB to my macbook air, and yet, when I want to print smth, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

Thanks for the reply. I never get the option to "Restore Previous History" from History. I don't even have the box checked that asks to delete the history when Firefox closes. I don't know what's wrong, no matter what, I always lose everything. I have the box marked "Show my windows and tabs from last time" for when I open Firefox, but it never shows that, just my homepage. Also, when I check my History, it only shows the pages that I opened since I started Firefox, nothing from before. Even if I were to open up 10 pages now, close Firefox, and open it, the history would only show the homepage that opened this time, not any of the 10 pages that I opened 5 minutes ago.

My new computer with Windows 8.1 does not recognize my iPhone when connected via USB.

My new Dell Computer with Windows 8.1 does not recognize my iPhone 5 when connected via USB. I have reinstalled iTunes to no avail.

Hey, I may have to if I can't get this one to work!!
I have tried a different USB to no avail. Both cables work on my old Dell so I don't believe they are the issue.
I uninstalled iTunes as directed by Apple Support and reinstalled. Apparently, Apple Mobile Device Support is not loading with it because it does not show up in programs.

Why does my iphone loss WIFI connection when I leave the room? When other mobile devices stay connected?

Why does my IPhone loss WIFI connection when I leave the room? When other mobile devices stay connected?
I can not send text messages to other IPhones if I do not have wifi or 3G on, the texts are sent as emails.

Hey Linders1987,
Welcome to the Apple Support Communities! I understand that you are experiencing issues with Wi-Fi on your iPhone 5. The following resource may provide a solution:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
http://support.apple.com/en-us/TS1398
Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including
- previously connected Wi-Fi networks and passwords
- recently used Bluetooth accessories
- VPN and APN settings
Thanks,
Matt M.

When i plug in my iPhone via USB iTunes dose not reconize my iphone

i just got a new computer (with windows 8) and i downloaded the latest version of apple i have a iphone 5 with ios 7.0.4 when i plug in my phone via USB to my laptop an auto play pops up that gives me the options to: organize and edit my photos (adobe elements organizer 11.0), open device to view files (file explorer),import photos and videos and or take no action but itunes does not open and on my iphone when i unlock it (i dont have a password) it also has a popup that askes if i want to trust my computer "your settings and data will be accessible from this computer when connected."then says trust or dont trust and it does every time i plug my phone into my computer when i open itunes my iphone is not reconized itunes dose not even reconize that there is a devive plugged in for that matter. and i have looked at previous problems and they all say to press on the device button. but there is no button when i go into prefrences ctrl+ and press devices all that it says is device backups (witch is empty) then "prevent ipods,ipads and iphones from sycing automatially witch is not marked off then warn when _____ of the data on this computer will be changed i selected any theit says itunes is not paired with any remotes then reset sync history
my questions are how do i get itunes to reconize my device and the trust my compter thing to turn off how do i sync my device with my computer

Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

Shootist007 wrote:
If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad. Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS. Just maybe right genius? Don't rush to criticize someone's recommendations until you realize other possibilities. (I did say "if it does")
Thank you

When iPhone 5s is connected via USB no audio is heard

Hi There -
I've seen older threads on this issue but I don't think I've really come across any solutions. My issue started yesterday; now before reading further I have to ask that you please keep in mind that I did perform the latest upgrade on my iPhone a bit earlier in the day.
When I connect my iPhone to my vehicle sync system and announce that I'd like to connect via USB, the voice recognition repeats my request and then the music on my iPhone shows to be playing on the display in my vehicle. The problem is that though the music appears to be playing and the minutes played are being displayed there is no audio coming through. When I switch to the Bluetooth Audio option all sound comes through.
Now, as a 2nd test, we connected my sons iPhone 5s via USB (he has not taken the latest update on his iPhone) and the same issue happens with his. Voice recognition changes to the USB format as requested, music appears to be playing but no audio is heard. When we change his phone to Bluetooth Audio the audio comes through nice and clear.
I'm not entirely convinced the update caused the issue so I wanted to put this out there to see if anyone has run into this and were able to actually resolve the issue.
I know the USB cable is working fine because when I do plug it into either phone the phone makes the little connection sound and pops up a brief battery percentage box. I also know the cable is working because when we announce USB as our audio of choice the system recognize USB via the iPhone.
One other thing I tried looking for was the option on the phone to switch from Docked to Synch - I know on my iPhone 4 I was able to switch back and forth through iTunes and would also have the option if I tried to watch anything via You Tube when connected to the dock; I cannot find this anywhere on the 5s when connected via USB.
Help is greatly appreciated!!!

I have had similar troubles with wifi.. some improvement removing BlackBerry desktop software & drivers & reinstalling after reboot... I used the same installer I had previously, but a fresh downloaded installer couldn't hurt...
10.3.1 SW .1779 OS .2726 WLAN .1.1 Radio .2727

IMac does't go into sleepmode, when an iOS-device is connected via usb

Similar Messages

Maybe you are looking for