IMac doesn't detect the keyboard

Hi,
I just replaced the batteries of my blootooth keyboard, it powers up just fine (I have also tried it with another mac) but my iMac doesn't detect it - so I cannot log in. Can anyone help me? I have tried to turn iMac off and unplug all cords but it doesn't help.

Hi, plug into your computer any USB k/b - Login, go to System Preferences -> Bluetooth -> hilite your BT k/b & Mouse -> Use the (-)sign at the bottom of the open window to delete items..
Restart your computer -> Repair Permissions & then set up your BT k/b & mouse...L

Similar Messages

IMac doesn't detect the base station correctly (with new base station)

I have a brand new Airport Express. I'm trying to connect to my iMac G5. Everything works fine in the start up with getting the green light on the Express base station. But, my iMac doesn't "connect" with the base station.
I try the "Airport Setup Assistant" and get a window that says "No new Airport networks were found."
I look at the "pie" at the top of the iMac screen. It has the white and black stripes on it. I click it and find "Apple Network e3fec9" and select it. The signal level shown has all blue buttons. That window also reports "Status: Connected to 'Apple Network e3fec9'" and "Base Station ID:00:19:E3:E3:FE:C9". That's what makes me think that my problem must be in the iMac and not the base station.
I had also tried my Dell laptop (from work) and found that it found the internet network. It detected the "local host" and "Apple Network" and the signal strength was very good (~90% or so). The only problem was that the laptop thought it needed to recreate an IP address before it could connect to the internet. I didn't do that, since I saw it was detecting the network.
Please help. Why should this be so hard?
iMac Mac OS X (10.4.9) none

I'm confused. You say you're connected to "Apple Network e3fec9", and you're having trouble connecting your iMac? It sounds like you've managed to connect to your Airport Base Station.
Have you configured the Internet settings for the base station? Try this:
1. Launch Airport Admin Utility (in /Applications/Utilities/) select "Apple Network e3fec9" and click Configure.
2. Under the Airport tab, give the base station a name, click the Base Station Options… button, and make sure Enable Ethernet Port is checked.
3. Select Create a Wireless Network (Home Router) if it isn't already selected, give your network a name, and check Create a closed network
4.Click the Wireless Security button and set it to WPA Personal, and enter a password.
5. Under the Internet tab, set Connect Using: to Ethernet, and in the Configure dropdown, select Using DHCP
6. Click the Access Control tab and click the plus button on the right side of the window. In the panel that pops up, click the This Computer button.
7. Click Update
I'm hoping it's something simple, like Enable Ethernet Port wasn't checked or something, and not something more serious.
Hope it helps.
Rob
17 iMac G5 Mac OS X (10.4.2)
17 iMac G5 Mac OS X (10.4.2)
17 iMac G5 Mac OS X (10.4.2)
17 iMac G5 Mac OS X (10.4.2)

IMac Doesn't Detect Headphones

I have a ~year old 24" iMac (2.8 GHz Core 2 Duo) that I just suddenly started having a problem with. I use headphones pretty regularly and they are almost always plugged into the headphone jack. Recently, I lent my headphones to someone and, when I plugged them back in, the machine doesn't detect them. The audio works just fine coming out of the internal speakers, it's just that it always comes out of the internal speakers, no matter if the headphones are plugged in or not (the headphones also work fine when plugged in somewhere else). I took a look at the Sound Preferences panel and, sure enough, it doesn't detect the headphones as plugged in. Does anyone have any suggestions on troubleshooting?
I'm not sure it matters, but I did just recently upgraded to 10.5.6. The headphones worked after the upgrade, but it may be that this is the first time they were replugged in after the upgrade.

It sounds like the head phone jack has been damaged. If they were connected to a port they weren't meant for, that can happen. And that in turn, can damage your audio output port.
Try disconnecting everything but the keyboard and mouse and reboot the iMac. See if that makes a difference.
Resetting the SMC only provides this kind of support:
-Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
-Handling system resets from various commands.
-Controlling the fans. so I doubt it can fix the audio issue.
Check the headphone port really close, make sure there isn't any dust or link or anything that might keep the jack from connecting properly.
Carolyn

How can I print from iPad to a Brother printer with a TP-link tl-wps510u connected to it without using a computer? It doesn't detect the printer.

I have a Brother printer that doesn't have wifi, but I bought a Wireless Server Print to connect to it. I want the iPad can print directly to the printer without using a computer, but the iPad doesn't detect the printer. Is that possible?

javigomez88 wrote:
I know that Brother has an app that works with its wireless printers, even if they are not airprint. My printer isn't wireless, is a wireless print server attached to the printer what is able to make this printer wireless. Could this app be a solution or only would work with the wireless Brother printers?
The Apps usually only work with wireless printers, though if its free, there is no harm in trying, and see if it gets picked up, but its doubtful, as the print server would need to transmit in the same protocol the Brother Print App is expecting from the supported wireless printers.

My IMac has stopped seeing the keyboard. I have changed the batteries and the green light comes on saying it is looking to pair with the IMac but without success. I am left with the IMac switched on and I am unable to enter a password.

I have been using my IMac without a problem when I left it and went back to enter the password the IMac did not see the keyboard. I have changed the batteries and the green light comes up on the keyboard and then starts to flash indicating it is looking for the IMac but nothing happens. I have tried another set of new batteries with the same result. Is there any known problems in this area. The IMac is 5 months old.
Thank you for any help

What operating system does your iMac have? (please always post your operating system to prevent confustion).
If it's pre-Lion you will have to set Mail up manually:
Entering iCloud email settings manually in Snow Leopard or Leopard
Entering iCloud email settings manually in Tiger

Skype doesn't detect the webcam

I know this problem has been posted out many times, but unfortunately after trying each solution, it's resolves nothing on my problem.
I'm using ASUS X44C series, skype doesn't detect the webcam itself. And using Windows 7 64bit.
I've been trying to reinstal the lifeframe for webcam. Doesn't work
Tried to using many cam. doesn't work
Tried to making default the windows itself. Doesn't work
Reinstall and update skype. Still doesn't work
I even calling an IT to fix this, but he still unable to find the problems.
Any ideas?

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Screen Saver when calling and need to use the Keypad, the screen saver doesn't detect the phone has left the ear and blanks out the screen. Even ending a call is difficult as the screen blanks out within seconds

I have to use the Keypad a lot when making calls. Make the call, the Robot then asks to enter a number for a service, pull the phone down from the ear, the screen may light up for a second, but then the screen saver cuts in, blanking the screen out. Sometimes you hit the Home Key to awaken the sccreen, enter your number and then back to the ear to hear the next set of instructions. Back and forth just trying to enter the options is a pain. Sometimes even trying to end the call, the screen blanks out and you fight to try and end a call.
If I use the Speaker function the keypad works; the speakler phone is not alway appropriate.
It appears that the phone gyro, doesn't detect the phone has moved from the ear to the viewing angle. This wasn't an issue until recently and I can't remeber if it's the iPhone 5 or one of the updates. It definitly wasn't there earlier on, as I threw away an Windows 6.5 phone for the same problem.
I'm not sure if it's a hardware or software (design) issue.

It is not the gyro. This has everything to do with the iPhone's prioximity sensor.
Are you using a case that may be blocking or partially blocking the proximity sensor? If you are using the case, remove the case prior to the next call to see if the same occurs without the case.

After 4.3.4 update the ipPad is in Recovery mode and iTunes doesn't detect the device

Hello,
brand new Win7 installation, restored iTunes folder and installed latest 10.4. iTunes64 bit.
Hooked up both my iPad and iPhone4
Detected new firmware 4.3.4
and bang, both devices are now stuck into recovery mode.
No matter I set the iPad/iPhone into Recovery or DFU mode, iTunes will not detect any device for recovery.
Uninstall/Install iTunes => no change
The driver will display that the units is detected and in DFU or Recovery mode, but iTunes doesn't detect the device.
Tried TinyUmbrella etc but no fix
Any other hint?
Best Regards
Uwe

Place the device in DFU mode (google it) then restore.

My iphoto program on my Imac doesn't detect my iphone 4s

my iphoto program on my Imac doesn't detect my iphone 4s

Open iPhoto, Preferences, General, select dropdown list Connected camera opens: iPhoto

My dvd player on my iMac doesn't see the jpegs on a dvd.

my dvd player on my iMac doesn't see the jpegs on a dvd. The jpegs are there cause we can see them on my husbands windows laptop. My imac doesn't see anything on the DVD.

OPen Disk Utility, highlight that DVD if it shows, click on the blue info icon, what does it report for Format & such?

Ethernet port doesn't detect the cable is connected and doesn't function

It's since this morning that I can't make my en0 ethernet port work. Please note: changed dozens of cables, hubs, etc. The port simply doesn't detect the cable is plugged in and the actual network interface configuration crashes with the following log upon system boot-up:
Process: eapolclient [403]
Path: /System/Library/SystemConfiguration/EAPOLController.bundle/Resources/eapolclien t
Identifier: eapolclient
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: bash [368]
Date/Time: 2009-06-23 19:42:52.593 +0200
OS Version: Mac OS X 10.5.7 (9J61)
Report Version: 6
Anonymous UUID: 750052DD-67C5-4AEB-8843-9AB2F6B54967
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 com.apple.CoreFoundation 0x96ff159b CFDictionaryGetCount + 43
1 com.apple.CoreFoundation 0x96ff435d CFDictionaryCreateCopy + 29
2 eapolclient 0x000056ba Supplicantupdateconfiguration + 49
3 eapolclient 0x00003316 main + 1303
4 eapolclient 0x00001d06 start + 54
Thread 1:
0 libSystem.B.dylib 0x90be86fa select$DARWIN_EXTSN + 10
1 libSystem.B.dylib 0x90bca155 pthreadstart + 321
2 libSystem.B.dylib 0x90bca012 thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0xa087d4ec ebx: 0x96ff157e ecx: 0x00000001 edx: 0x00000010
edi: 0x001021c0 esi: 0x00000000 ebp: 0xbffff6a8 esp: 0xbffff690
ss: 0x0000001f efl: 0x00010283 eip: 0x96ff159b cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x00000000
Binary Images:
0x1000 - 0x8ff3 eapolclient ??? (???) <601ef87898001b311ead6372f01bdc5f> /System/Library/SystemConfiguration/EAPOLController.bundle/Resources/eapolclien t
0x21000 - 0x37fe4 com.apple.EAP8021X 9.0.5 (???) <a7b029e76077ad0f1decd8912359f590> /System/Library/PrivateFrameworks/EAP8021X.framework/Versions/A/EAP8021X
0x42000 - 0x6cff8 com.apple.framework.Apple80211 5.2.7 (527.2) <5982190f9caa25fca18b8753671d0d64> /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
0x8fe00000 - 0x8fe2db43 dyld 97.1 (???) <100d362e03410f181a34e04e94189ae5> /usr/lib/dyld
0x90b98000 - 0x90cffff3 libSystem.B.dylib ??? (???) <b47c8e6e45aef620730710a732bf1930> /usr/lib/libSystem.B.dylib
0x92188000 - 0x921e5ffb libstdc++.6.dylib ??? (???) <f75e5133d72769de5ce6c06153fc65f6> /usr/lib/libstdc++.6.dylib
0x92ee9000 - 0x92f14fe7 libauto.dylib ??? (???) <2e44c523b851e8e25f05d13a48070a58> /usr/lib/libauto.dylib
0x9433f000 - 0x9441ffff libobjc.A.dylib ??? (???) <400e943f9e8a678eea22a1d1205490ee> /usr/lib/libobjc.A.dylib
0x945fd000 - 0x94689ff7 com.apple.framework.IOKit 1.5.2 (???) <97b9f9d584f48891377f0481b9104434> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x947c8000 - 0x947d6ffd libz.1.dylib ??? (???) <a98b3b221a72b54faf73ded3dd7000e5> /usr/lib/libz.1.dylib
0x95697000 - 0x95868ffb com.apple.security 5.0.5 (36371) <c13e0bb1acfdcf94be4d3ee118ef190e> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x95938000 - 0x9596ffff com.apple.SystemConfiguration 1.9.2 (1.9.2) <eab546255ac099b9616df999c9359d0e> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x95a2f000 - 0x95ae1ffb libcrypto.0.9.7.dylib ??? (???) <9d714c92872a93dd127ea8556b2c8945> /usr/lib/libcrypto.0.9.7.dylib
0x96faf000 - 0x970e2fef com.apple.CoreFoundation 6.5.6 (476.18) <2d52bab73660117571bd6486dc318f8e> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x970e3000 - 0x970e7fff libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x9722b000 - 0x97232fe9 libgcc_s.1.dylib ??? (???) <e280ddf3f5fb3049e674edcb109f389a> /usr/lib/libgcc_s.1.dylib
0x97315000 - 0x9744eff7 libicucore.A.dylib ??? (???) <cac059ebdac7d9a63ee0f7a648c9f6cf> /usr/lib/libicucore.A.dylib
0xfffe8000 - 0xfffebfff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib

I had a similar issue with a MacBook Pro. When connecting the network cable, the network preferences would show 'not connected'. I thought it was hardware, but when I transferred the user to another Mac, I found that that ethernet device all the sudden stopped working as well.
I was able to get the ethernet back with:
System Preferences
->Network
->Assist Me...
->Diagnostics...
At some point the ethernet device went green and all was well.
Maybe this will help.

Logitech S 530: Mac Mini sometimes doesn't recognise the keyboard/mouse

Hi!
I bought the Logitech S 530 for my Mac Mini Intel Core Solo some weeks ago. Sometimes the mac doesn't recognize the keyboard/mouse set and the Logitech Control Center say "No logitech-hardware found". And then all the extra buttons on my mouse and keyboard doesn't work. A simple restart doesn't solve the problem. Often I habe to switch of the computer or even deinstall und reinstall the driver. I wrote to the Logitech Support, and they told me to delete as a root-user some files and then to reinstall the Logitech Control Center. I did it, but the problem wasn't solved. Even if the Logitech Control Center told me, that the hardware wasn't found, the system profiler say:
USB Receiver:
Version: 22.40
Bus-Strom (mA): 500
Geschwindigkeit: Bis zu 1,5 MBit/s
Hersteller: Logitech
Produkt-ID: 0xc50c
Hersteller-ID: 0x046d
Does anyone have a idea about this problem?
Thank you,
Sebastian

Hi!
Has it continued to work alright since your last post
on Sept. 30?
Yes, it works very good (as you can read, because I type on it!)
But I got some news from the APE-Support:
They told me, that this message in the system.log isn't a error message: "You'll see these messages simply to inform that Application Enhancer cannot and does not affect processes owned by root. They are purely informative." Then I asked, why this "information" is written in the system.log I got another mail. They told me, that this message came from a maxtor software, which I installed to use my externel drive. and: "The maxtor software doesn't use APE at all. APE is saying it cannot affect the software in any manner, in case you were expecting it to work with the maxtor software. I'm not sure if that maxtor software even works. If you don't use the button on your maxtor drive, you can just disable the maxtor software completely."
So, I seems that there is a problem between this logitech driver with APE and the Maxtor-Stuff. But, Ashleyn, do you use the maxtor software too?

K8N NEO 2 Platinum sometimes doesn't initialise the keyboard and mouse

I got a K8N NEO 2 Platinum for christmas, and everytime it reboots (fine when you turn it on fresh), it produces the shortest of bleeps, and doesn't initialise the keyboard and mouse. The only way to do anything then is to go for the power button and windows xp shuts down. It is still responding, just the bios hasn't initialised the keyboard and mouse.
Anyone know anything about this, and how to solve it?

ok, thanks
Athlon XP 3500+ Newcastle
MSI K8N NEO2 Platinum (BIOS v 1.4)
Keytronic PS2 keyboard (KT800PS2UK12)
A4 Tech 4D PS2 mouse (IRW-25)
geforce 4 ti 4600
SB Live Platinum
wintv go
DVD ROM (OEM unbranded)
DVD +/- RW LITEON
80GB SATA HDD
40GB IDE HDD
2x 256MB DDR 333MHz RAM (PC2700)
everything worked fine till the new mobo, and still works fine xcept this problem
thanks again

Mac doesn't detect the hard drive

Hello, my Powerbook doesn't detect the Hard Drive (tryied restarting, tryied Disk Utility from DVDs)... Yesterday and some days before I heard some clicking noises coming from the PB.
I'm still under Apple Care coverage, I think they'll remplace it for me (won't they?), but the most important thing: does anyone knows if the data on the hard drive can be restored??... And if Apple Care will try to restore it or it will just remplace the Hard Drive?... do I have any other option?
PowerBook G4 Mac OS X (10.4.7) 1.5Ghz 512MB 80GB Superdrive

Here's some answers. Everyone else here chime in if I'm wrong!
Apple Care will replace the drive (unless they determine you killed it by intentionally abusing the PB itself, very unlikely).
Apple Care will not transfer any data they find to a new drive, just replace it and very likely load a default Software Configuration.
Here are some options. In both cases, be READY to start copying data the INSTANT the drive is recognized. If it comes up at all...
- Restart the PB in Target Disk Mode by holding down the "T" key during the bootup process. If you can get the PB to load as a Target Disk, you can plug it into another Mac and copy off your files (or clone it if you want to get more advanced)
- Have a local shop remove the hard drive and replace it with a new one. Reload the default software yourself, then put the original malfunctioning drive into an external firewire/USB case to see if it's still salvageable.
Yeah, clicking noises from a hard drive are never good. I've had a couple drives go bad on me, and was lucky enough to have time to backup real quick - biting nails all the way. Let us know how you're doing with the repair,
Ed

My iMac isn't detecting the sound device

I've not had a single problem with my iMac since I purchased it... until now. For some reason, my iMac is not longer detecting the audio device. Several forums suggested plugging in a set of head phones for testing purposes. I have done that, but still have no volume control. The speaker in the top right corner is light gray, and when I try to do anything using the keyboard controls, I get a speaker with line through it.
Does anyone have any suggestions?

I have been having fun and games trying to set up a dual-band Airport network with the old AEBS and the new AEBSn so know what frustrations you are going through. Some of the options that have helped me include:-
1. A quick reset y pulling the power cord from the AEBS waiting a few seconds then putting it back in helps - then click on the Airport scanning symbol on the top right menu bar, then Join Network, Show other networks and it often finds it.
2. If no go then reset the AEBS fully by putting in a paper clip to the small hole then plugging in the unit to the power and waiting about 15 seconds until it flashes. Then start again with the Airport setup.
Best of luck
Mike

IMac doesn't detect the keyboard

Similar Messages

Maybe you are looking for