IMac don't play PAL DVDs only NTSC.

The PAL DVD gets ejected after a short time. Why? When I insert a DVD with NTSC it works fine. DVD-player starts automatically and plays the disc.
My iMac model is late 2009 with OS X Yosemite 10.10.3

But if I insert a DVD with region 0 (all regions) it plays just fine.
So why bother w/another region then?

Similar Messages

  • Convert PAL DVD to NTSC?

    Hi. I recently got an imac G5 and tried playing my 1st DVD. The message came up saying that I have to choose a region code and will only be able to set the region code 5 times before its permanently set. I find this very inconvienent as I have some of both NTSC (region 1) and PAL (region 2) DVDs that I would like to be able to play on my Mac. As a worksround....I'm wondering if its possible for me to convert my PAL DVDs to NTSC using imovie and perhaps some other software.......perhaps importing the info on the PAL DVD into imovie ......and burning a NTSC (region 1) copy? If possible .....how would I go about doing this? Thanks.

    I have my computer set to read region 2 DVD . Is this a problem when trying to convert a DVD to region free or 1?
    When I run MTR, I get 2 folders, Audio_TS (which is empty) and VIDEO_TS.
    VIDEO_TS has many files, example; VIDEO_TS.BUP, VIDEO_TSIFO, VIDEO_VOB, VTS010.BUP, VTS010.IFO, VTS010.VOB....... etc.
    When I open JES 2.7.6 to convert from PAL > NTSC... the JES input pane doesn't see the files (they won't hi-lite, double click or anything) (could it be because I have my computer set to read region 2?)
    Toast see the MTR files. If I try importing those same MTR files or the DVD files to Toast 6>video tab, I get "files are in a unsupported format and cannot be imported"
    If I try and simply take the Pal DVD and "Toast it" from the desktop, I get "Disk could not be mounted. All open files and programs on this volume must be closed first"
    When I tried DVDxDV>OTMovie, the playback was jittery on any thing that was moving with-in the picture frame. completely un-watchable. (well maybe with the right drugs....)
    I looked at both links send by Matti (btw thank you very much) but I am a novice and don't understand all of the technical jargon....
    All I'm trying to do is get a DVD that will play on my stand alone DVD/TV....
    KnuckleHead

  • PAL DVD from NTSC original

    Hi,
    Just got DVD SP 4 and had a question. I heard from someone that you could make a PAL DVD from NTSC source footage in DVD SP 4 in one easy step...is this true?
    I kinda poked around but didn't see a magic button that seemed to do this...
    I have a DVD with NTSC footage...it's an auto-play with no menus, just an 8 minute video. Do I need to make a PAL version of the footage outside of DVD SP 4 or is there something in the program that does this for me?
    Thank in advance...
    Christian Remde

    Is this something only available in Compressor? When I export via Quicktime Pro from within FCP4, I can choose to convert to PAL from NTSC or vice-versa and it looks okay to me. Does Compressor do anything special when it comes to format conversion that QTPro doesn't do? The frame-blending (if necessary) and scaling seems to be done in QTPro, so I can't think of anything else Compressor could do to come up with a better result. Of course I'm also one of the many who keep getting the "Unable to connect to background process" error, so I don't think Compressor is an option for me.

  • How do I convert an entire PAL DVD to NTSC, menus and all?

    Hello everyone,
    I've been given a set of PAL DVD's which need to be converted into NTSC. Now, from my understanding, there is no one program available that can do this, so I've had to rip all the video tracks off, convert them to NTSC mp2's and author the DVD from the ground up in DVDSP, build a VIDEO_TS file, then use Toast to compress to a single layer DVD and burn. If anyone knows a program that can convert an entire PAL DVD to NTSC, that would be greatly appreciated.
    The next problem is that when I burn any of the DVD's and put them in a duplication tower (I'm not sure if that's the actual name, but it's one of those machines where you just put the original disc in the top drive and fill the other 8 or so drives under it with blanks), it says that the burn has failed. I have tried another duplication tower and end with the same result. One option I have not tried just yet is to change the brand of media I'm using to burn, but will do so next chance I get.
    I'm not sure if the two problems are related or not, but I just thought it would help.
    Thanks in advance.

    2 options.
    1) Best option - only available if you have the source material - Convert source material from PAL to NTSC using the Nattress standards converter.
    http://www.nattress.com/Products/standardsconversion/standardsconversion.htm
    or the JES deinterlacer:
    http://www.xs4all.nl/~jeschot/home.html
    It's also possible to do this in Compressor but not as good quality and longer render times.
    2) If you don't have the source footage, you'll need to demux the file in MPeg Streamclip:
    http://www.squared5.com/
    then transcode the file as described here:
    http://discussions.apple.com/thread.jspa?messageID=1946985&#1946985

  • Burning PAL dvd from NTSC FCP 6 project?

    I need to burn a European market PAL dvd sample from a NTSC project. I've done this before for a European film festival, but it was a very hit or miss process.. Basically, back then, I mixed the project down as both PAL and NTSC files, then burned every combination of NTSC and PAL format DVDs (PAL file/PAL dvd format, NTSC file/PAL dvd format, PAL file NTSC format, and NTSC file/NTSC format).. I expected the PAL/PAL to work, but it didn't. In fact, I seem to remember that one of the combos that I least expected to work actually did.. maybe the NTSC/PAL disk (can't remember for sure)
    Will someone please advise me as to the correct way to burn the NTSC project, such that it will be playable an European PAL format machines?

    If you need a true PAL dvd, you need to convert your ntsc quicktime to a PAL quicktime using either compressor or something like graeme Natrresses standard conversion plug in. You will also need to recreate your dvd menus and reauthor the dvd.

  • FYI Playing PAL DVD on US MBP

    I am not sure if this has been brought up before, but my MBP (late 2007), and I am sure many other similar boxes play PAL DVDs perfectly. No conversion necessary.
    I normally use VLC, but I checked with the Leopard DVD player and both work normally.
    I thought I would just pass this along for anyone who was not sure.
    Enjoy.

    If your movie is encoded in the right format (such as MP4) and to specs that the Apple TV is happy with, it doesn't matter if the original movie was PAL or NTSC.
    The difference between the two is the refresh rate. NTSC is approx 60Hz and PAL is 50Hz. The Apple TV will happily convert 50Hz to 60Hz and vice versa. It will output to whatever refresh rate is set in the Audio/Video settings on your Apple TV - which if you are in the US will most likely already be 60Hz. There should be no need to change these settings.
    However, you may notice that motion (such as scrolling titles and slow pans) will not be as smooth due to the conversion.
    But, in practice this is not a problem.
    In short, the answer is YES.
    Message was edited by: Easybourne

  • How to convert PAL dvd to NTSC?

    Hello I am trying to convert a PAL dvd to NTSC format and was unable to when I tried mac the ripper. Perhaps it wasn't the program for it.
    I'm looking for a free program that would allow me to do this.
    Thanks.
    Dorian

    I do not have final cut pro. Is there another option I can use?
    No I'm not trying to rip dvd's. I bought this dvd in europe but unfortunately cannot play in on my dvd player (although I have an all format playing dvd player).
    Also, do you get an error when logging into the apple forums.
    This is the message I get every time:
    Error
    An error has occurred. We apologize for the inconvenience.
    Thanks for your help.
    Dorian

  • IMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive  ?? (DVD plays fine on household DVD player and also play fine in Toshiba laptop ) Why not on the iMac - anyone know???

    iMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive  ?? (DVD plays fine on household DVD player and also plays fine on Toshiba laptop ) Why not on the iMac - anyone know???

    There are many reasons this could be the case but whether an optical disc can be read or not is a function of:
    The reflective media layer of the disc
    Whether the burned disc was a DVD-R, DVD+R, DVD-RW, DVD+RW
    The brand, model, and production lot of the disc
    The specific frequency of the Write lasers that burned the disc
    The specific frequency of the Read lasers that are attempting to read the disc
    Are the Read lasers in the drive working (it is common for one set of lasers in a drive to fail while others continue to work)
    How old are the Write and Read drives (laser frequencies change with age)
    Is there dust on the read laser
    Is there dust on the read lens
    etc.
    At one time it was estimated that fewer than 80% of all burned discs were readable in 90% of the drives. That has, I believe improved over time but at the same time it seems the faillure rate of lasers in the drives has increased but that may simply be the result of how many different read and write lasers there are in today's superdrives. Fortunately todays drives are a lot less expensive the replace -- now that Apple no longer installs optical drives in their computers.

  • Can Encore make a Pal DVD from NTSC source?

    Can Encore make a Pal DVD from NTSC source?

    Convert NTSC <--> PAL http://forums.adobe.com/thread/995779
    Regions and NTSC vs PAL http://forums.adobe.com/thread/951042

  • Creating a PAL DVD  from NTSC Video camcorder

    Can the latest version of iMovie create a PAL DVD from NTSC Video camcorder? What are best practices and workflow to create a PAL DVD from NTSC sources.

    iMovie doesn't create DVDs, iDVD does..
    in iM's prefs, set Video to 30fps = NTSC
    quit and relaunch to take changes in effect
    in iDVD's prefs, set Video to 25fps = PAL
    quit and relaunch to take changes in effect
    when finished with editing in iM, Share to Mediabrowser
    in iDVD, select a theme, grab movies from Mediabrowser
    burned DVD will be PAL ..

  • Pal dVD from NTSC Footage

    When you author a Pal DVD using NTSC as your original footage do you need to convert using compressor first or can you just set up for a Pal DVD in DVDSP using your original NTSC footage?
    Thanks
    Jeff

    when you open a project file and change the preferences I believe you will get a warning.
    DVDSP is an authoring environment. It would be better to managing the NTSC-PAL conversion in Compressor.That tool is designed for this type of work.

  • DVD Player has started playing PAL DVD's on external PAL display very badly

    I have my Early 2006 iMac connected to an external HDTV (Mini-DVI->HDMI)
    Using display options I can switch the external display easily between NTSC and PAL refresh rates.
    It used to be that apple's DVD player could play a PAL dvd just fine on the display but now the frame rate drifts in and out of sync as though it no longer understands that the TV is set to 50hz.
    Although I used to use DVD player all the time I haven't done so for quite some months so I don't know when this started happening although I have a feeling that it was with a recent OS X update.
    I say this because a few months ago all of a sudden the same thing happened with Elgato's EyeTV, but they issued a patch sometime later and it fixed the v-sync issue for their app.
    I'm also wondering if it may be a de-interlacing issue rather than a v-sync issue but I'm not sure, I've tried various DVD's.
    I have tried deleting ~/Library/Preferences/com.apple.DVDPlayer but this hasn't helped.
    If it's relevant, my iMac has an ATI Radeon X1600
    Any ideas why DVD player has started having trouble with 50hz displays and how I might fix it?
    Failing that, is there a good (hopefully free) dvd player alternative which is better at handing external displays of varying display modes?
    p.s this was the most appropriate forum I could find.

    I suggest that you create 15-second silent audio slug that you can use to move the audio the same amount you have moved the video.
    John Link

  • Exporting problem: How can I make a PAL DVD with NTSC footage?

    Hi everyone,
    I need some help as I've been trying to burn a DVD for a couple of days now but it still isn't working. Here is my situation:
    I shot a lot of standard definition DV with my Canon GL-2 (NTSC, bought in America) that I imported into the trial version of Premiere 5.5.
    I edited the footage and set out to make a DVD with the footage that will play on PAL televisions as I live in Australia now and it's all PAL over here.
    I exported the footage and put it onto Windows DVD Maker because the trial version of Premiere doesn't let you use Encore.
    The footage looked great on Premiere and on the little preview that you get through Windows DVD Maker, but when I burnt the DVD and tried playing it on my TV it looked really bad.
    The big problem was the color. Everything was much too red, particularly people's faces.
    I assume the problem lies in my export settings, and I was hoping someome who has done this before could help me out. I tried a variety of settings, but they all looked bad and I'd prefer not to waste any more money on DVDs that look like hell.
    Is there anyone out there who can tell me how I can get the DVD to look like it does on my computer? What setting would I need to apply? I have been all over the internet, looking at a lot of tutorials and forums, but havent found an answer yet.
    Thanks a bunch!
    Shawn
    PS- My academic credentials have now been verified by Adobe, so if you know a way to do this using Encore, please let me know because in a few hours I will have access to that as well. Cheers!

    Hey shooternz, thanks for the fast reply.
    My DVD player is playing the DVDs so that's OK, the real problem is that they look so bad. I just bought a whole mess of DVDs because I thought I would just experiment while I was waiting to see if anyone could help me out, and the results have been frustrating. I tried it with all PAL settings and the first DVD I made was much better. That one didnt have all of the sections, just one of the chapters (I wanted to check quickly whether the setting I had was a good one, so I just put a short 7 minute clip on). Encouraged, I tried burning the whole disc using the same settings, but it came out crappy again. Much too red. This is really frustrating me. My computer is new, so I can't see why there would be any problem with the DVD burner, but if two DVDs with the same export settings are coming out differently, I'm thinking it might have to be a problem with either the DVD burner or the DVDs?
    Can anybody suggest anything? I'm dying here.

  • Rec's to convert PAL DVDs to NTSC?

    Hello, I've run into a video conversion issue and was hoping to get some guidance. So a friend mistakenly gifted me a DVD that was not NTSC/Region 1; I didn't realize this at first when I inserted and tried playing it in my Macbook, but unfortunately did after I'd put it into my home DVD player (the DVD logos loaded just fine, but when it came to the spot where the DVD menu was supposed to load, my screen started flickering and I thought both my TV and DVD player were broken).
    So I have 2 crucial questions:
    1) Is it possible to look at a DVD on my desktop/in the Finder (or using the DVD Player feature), and tell the difference between a PAL and NTSC one?
    2) Have you ever converted a PAL DVD to a NTSC one, how difficult is it, and what's your recommended/preferred method/program?
    I tried Googling the subject, but many of the discussions/methods that came up were out of dated (some by as many as 6 years...)
    Thanks!! 

    ...Uh yeah, that's the program I initially used, to try to burn the Video_TS to another disc, still came up as PAL. And I don't want to re-burn another coaster, I want to convert it.
    Anyone else know?

  • Playing pal dvds

    Would I be able to play DVDs from non-US regions on my iMac?

    Yes, you could, but (and this a BIG but):
    When you first insert a DVD, the DVD player is set to the region the first DVD is in (I believe region 1 for the US); if you then want to play a PAL DVD, you'll be prompted to set the region to that (could be 2 - I'm not sure which number).
    The problem is that you are only allowed a total of 5 choices - period. On the 5th time, whatever choice you made will be the last....
    I've heard there are external burner/players which are region free; I'd suggest you look into one of those which will avoid the problem altogether.

Maybe you are looking for