IMac DV/400 will not read CD's since I installed Panther

Hi,
A customer's iMac DV/400 with 384 MB RAM was running OS 9.2.2. We decided to upgrade his OS to 10.3 (firmware was already up to date 4.19) After the first CD finished and it restarted and asked for disk 2, it would no longer read ANY CD's. In fact I had to cancel the rest of the install, because it wouldn't even recognize disk 2. What can be done to fix this? nothing has changed except the OS. I made the Mac boot from the old 9.2.2 again and the CD's read fine.
HELP!

If the DV ROM works with OS 9.2.2 then there is nothing wrong with it. Try installing Panther again. What is the size of the hard drive? Does it have enough free space?

Similar Messages

  • Imac dvd drive, will not read games disks

    imac dvd drive, will not read games disks whilst running in windows 7, cd and film dvd run ok. Can not believe Apple care who told me I cannot run pc games on iMac EVEN under windows 7. Any help please.

    Zap the PRAM and Reset the SMC, then try again.

  • IMac running Lion will not read windows 7 dvd

    Hello-
    I am currently trying to partition a part of my hard drive to run Windows 7. I open boot camp assistant and get all the way to where it says "install", I insert the windows 7 dvd and my imac spins it then spits it back out. I have tried several different things yet the results are all the same. I thought the drive may be bad so I tried a normal dvd and a cd, both read fine. I then tried an apple install dvd (lion) and the imac could not read that disc. So the problem seems to be that my computer just can't read install or data dvd's. Has anyone else had this issue?

    If you want to run MS Windows Simultaneously with OS X you can buy either Parallels or VMWare Fusion. Follow the installation instructions for the app you choose, both do the same thing. There are several advatages of using Parallels or Fusion including:
    1. Running OS X & Windows simultaneously
    2. You can run Windows XP, Vista and/or Windows 7
    You can also use Boot Camp which comes with OS X to run Windows 7. The downside is you can only run one operating system at a time, either MS Windows or OS X. If you are a Windows gamer this is the best option for 3D gaming. In order to install follow the instructions in Boot Camp Assistant, you can find BCA in Applications - Utilities - Boot Camp Assistant and then follow the on-screen instructions. 

  • Brand new iMacs with Lion will not read DVD-R

    Our business has just purchased 3 x brand new iMacs (3.4Ghz) pre-loaded with OSX Lion 10.7.2 and NONE of them will read a DVD-R containing important files I need to access. However, the trusty 2 year old iMac running Snow leopard sees the files instantly....what's wrong with Lion...?
    My 2 year old MacBook pro was updated with Lion a few months ago and hey, it stopped reading DVD-R's....how interesting....! It can't be ALL of the superdrives failing, so it's obviously a fault with the OS...seems to be a VERY common problem, so what's the problem in getting it fixed?

    Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

  • IMac will not read or open iWork '06 Install DVD

    I just got a new copy of iWork in the mail this afternoon. When I load the installation DVD, the iMac swallows it and then spits it out after a little more than 30 seconds. Other discs, including data and DVD's, open and read just fine. I've tried several since. I tried the installation DVD several times and also restarted the iMac and then tried. No luck. Any ideas?

    If you had a copy of Toast, you might try launching that before inserting the DVD; then use Toast to inspect the integrity of the disc.

  • My phone will not sync in iTunes since I installed ios5.

    I keep trying to sync and it says "waiting to sync" and then I get a message that says my phone could not be synced because the sync session failed to start.

    Hi Byron,
    I was having the same problem, few days back. I rebooted my device, but it did not work. Then I uninstalled the iTunes. Upon again installing the same iTunes, it started to sync. But today again I am facing the same issue. What do u suggest?

  • My Mac Mini will not read TDK disks from my iMac G3.

    My Mac Mini will not read TDK disks from my iMac G3.
    I used an iMac G3 (2001) -- the ones that looked like a big pod -- running on OS X and saved files to TDK  CD-R, 700 MB disks, which worked fine. Now that I have a Mac Mini (model number  A1347) I cannot get this computer to read those disks, made on the iMac G3.  Once inserted each disk will open and I can retrieve files for a short period, then the problems start. The computer makes some noises, the beach-ball/pinwheel goes around and I cannot get the files to open or the disk to eject. After a while the disk does eject -- to my relief. I keep using Control+E until ejection happens.
    My Mac Mini (2010-2011) is hooked up to a View Sonic HDMI LED monitor, an iOmega external hard-drive for backing up, an Epson Stylus C88 Plus printer and to the internet by a fibre 10MB feed. The Mac Mini runs on OS X version 10.6.8 Snow Leopard: Processor Speed:2.66 GHz
    I took the Mac Mini to an Apple retailer and he hooked the computer up to one of his monitors and it read the TDK disks just fine. I am now using Sony CD-RW, 700 MB disks, but I would prefer to use my TDKs because I have such a large pile of blank ones to use and there are those TDK disks with information that I want to look at from time to time. Can anyone tell me what to do?
    DJG

    Try disconnecting everything attached to the Mini except the monitor.
    If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. If successful, copy the files to the original account Public/Dropbox.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode - About
                    Safe Mode

  • I have iphoto '08 version with an imac osx 10.5.8. It will not read my RAW files  from my Nikon D800 - a very new model.How can I get it to read my RAW files?

    my somewhat old imac osx 10.5.8 with iphoto '08 will not read my RAW files from my new Nikon D800 camera - a new model on the market( 5 months or so). How can I get iphoto to read my RAW  files?

    iPhoto 08 would not read RAW files from that new a camera. You need to upgrade so you can get more up-to-date version of OS X and iPhoto. Another possiblity is see if iPhoto 11 will run on 10.5.8, if so you should update. You can also attempt to run Software Update and see if it finds a newer release of iPhoto 08 that supports newer RAW formats.

  • My 24" imac will not read cd's, reads dvd's fine

    My 24" imac will not read cd's, reads dvd's just fine.

    1) Make sure the CDs are clean and free from scratches.
    2) Go to: Apple > System Preferences > CDs & DVDs and make sure that blank CD: is set to Ask what to do and that music CD: is set to Open iTunes.

  • My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

    Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem.  Windstream tech service is useless.  i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help!  windstream said everything is working on their end, yea right.  What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products. 
    these are brand new machines with lion.
    This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great.  Please help before my wife losses it
    thanks

    There is a 2701HG-B, and a 2701HG-D.  If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
    By the way tell your wife it isn't that bad.  At least you have an ethernet DSL modem.  There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access.  At least now only the craziest DSL providers still use those modems.

  • I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

    I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

    I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
    Unfortunately you got caught up in the minor miracle of Rosetta.  Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
    However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion).  While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
    Workarounds:
    1.  Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
    2.  Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly.  There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
    3.  Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439
    NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
    NOTE 2:  Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

  • Imac crashed and will not boot up

    So my iMac crashed and will not boot. The power will come on and when it switches to the boot sequence it powers off.  I bought Black Tie protection at Best Buy but when I took it to them they shipped it to Apple. The problem was never fixed. Apple said it was a software issue to reload the OS. Well i did that and not even a day went by and it is doing the same thing. Any suggestions would be helpful...

    I agree with BGreg that you should run Apple Hardware Test , however run it in Extended Mode. If no errors turn up run it several times. It's a lengthy test so be patient. Also here is what Apple says about your symptoms in Gray progress bar appears under Apple logo during startup.
    I hope you have been backing up your system, if not then if you can boot into Safe Mode as suggested you should immediately backup using either a clone or Time Machine. That should be the #1 priority to preserve your data.

  • Will not read tiger software

    I recently bought tiger to upgrade from panther and my imac will not read the software disk. it may read it once in every ten tries but after having to restart the computer it will not read it. So I have been unable to install it. can anyone help?
    imac g4   Mac OS X (10.3.9)  

    What exactly do you mean by, "will not read the software disk?" Do you mean it won't start up from the DVD? Do you mean you cannot list the files on the DVD?
    Does the disc have a black label with large gray "X" or does it have a gray label? The latter is an OEM disc that can only be used with the computer model with which it came. Does the DVD have the word Upgrade printed on the label?
    If you are trying to boot from the DVD are you doing it correctly? Insert disc into the optical drive and wait until it mounts on the Desktop. Restart the computer and after the chime press and hold down the "C" key. Wait for the gray startup screen to appear. Release the key when the spinning gear appears beneath the dark gray Apple logo.

  • Adobe bridge appears as a question mark on iMac dock and will not open, why?

    Adobe bridge appears as a question mark on iMac dock and will not open, why?

    Because your Bridge install is somehow messed up.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I can connect my tc to the internet and back up my iMac, but it will not back up my mac book pro... ANY thoughts?

    i can connect my tc to the internet and back up my iMac, but it will not back up my mac book pro... ANY thoughts?

    When I go to connect my MBP, it says I have the wrong user name and/or password; however the names and password are the same on both computers.
    The MBP connects smoothly to the internet, just not the TC.
    Does this help?
    There is no login name required to get internet unless you are running a vpn or pppoe client.
    The wireless uses a security key.. but that is fixed in the wireless setup.. so no user login should be required at any time.
    It sounds to me like you have the wrong setup.
    Please do a screen shot and post it of the imac setup that works.. show us the airport network with its ip address and where you are putting in the login.
    Please also do a snapshot of the TC and how it is setup.
    What broadband do you have?
    Is the TC a router or bridged?

Maybe you are looking for