IMac DVD Drive--Loud Noises

Recently my iMac DVD drive has begun to make loud noises when a disc is inserted. The loud whirring, spinning, and clicking noises last for about a minute to two minutes before the DVD finally ejects (after many attempts). Nothing plays, the sounds just automatically start. I've read that lower quality/damaged discs can cause similar sounds, but I have used two different DVDs and get the same result when one has worked perfectly before. Is anyone aware of what the problem might be or how to fix it?
Thank you!
Christie

AppleCare's Express Lane. Do note that if you're within 50 miles (80 KM) of an Apple repair station, they'll do the repair onsite.

Similar Messages

My imac dvd drive is not working

my imac dvd drive is not working anytime I put a cd or dvd in and it tries to load for like one mintue and then just ejects

My superdrive has always been sensitive to dirt and smudges. Memorex and other mfgs make a DVD cleaner disk that has little bristles on the DVD to brush the dust away. Vacuuming the slot can also clean out dust buildup. Also there are disk polishers that can repair scratched CDs and DVD if they become unreadable.

IMac DVD drive MATSHITA DVD-R UJ-875, dont let CD come out

Hi, my imac DVD drive MATSHITA DVD-R UJ-875, dont let CD come out because the center pins that arrest the CD. Somebody can help me???

i try everything!!! the mouse, the drutil and all the other things so i open my iMac and the superdrive to see what is apening and cause is the center pins that arrest the CD when i eject the CD that pins dont let the CD free to come out... sorry for my english.

Can the iMac dvd drive read or accept mini-dvds/cds? thanks

Can the iMac dvd drive read or accept minid-dvds/cds? Thanks

Don't even attempt it. It won't work, and the disk will just get stuck in the drive's mechanism. If you want to use mini-disks, you'll need an external tray-loading optical drive.
Regards.

Imac dvd drive, will not read games disks

imac dvd drive, will not read games disks whilst running in windows 7, cd and film dvd run ok. Can not believe Apple care who told me I cannot run pc games on iMac EVEN under windows 7. Any help please.

Zap the PRAM and Reset the SMC, then try again.

Scary "rattling / vibrating" noise with iMac DVD drive

I have an iMac for 2 months now and experience problems with the DVD drive. With some DVDs (not all, but still too many for my taste) it spins around quite fast and makes a scary sound as if the DVD is vibrating (rrrrrrr) inside the iMac's superdrive. I am a bit affraid it will damage my DVDs. When I try to burn a DVD with iDVD or Toast the DVD is ejected by the system with a HW error.
I called the Apple help desk and was asked to burn a DVD with finder. That went ok. Next DVD with iDVD failed. I was asked to install iDVD again, because they thought it could be a software issue. The next DVD I could burn without problems, so the case was closed. Later burning some DVDs failed again, but at the moment the majority succeeds. And reading some already written discs makes sometimes a scary noise, but I can still read them.
I am not sure if I should call apple again, because it not always fails. It is very disappointing to be having these problems with my first Apple. Didn't expect that at all. Every time I insert a DVD now, I wonder what will happen. But it would be a pity to have to add an external dvd reader/writer to the beautiful integrated iMac.
Anybody a suggestion, or is it better to call Apple again?

I also have this problem with my 2.4ghz, 24" iMac. It started a few months back and it didn't seem to affect the media I stuck into it and for about 75% of the time the vibration was minimal. Now some DVD media are getting stuck in the drive and it takes a lot of tries with the eject button before enough of the DVD or CD shows itself to pull it out ... otherwise it gets sucked back in and I am back trying again.
What has just freaked me out is that some of the discs I have just burnt, when inserted, ask whether I want to write them i.e thinks they are blank ... when they go perfectly on my powerbook or my wife's G5 iMac. I just thought I would check out the support forums for a lead, but doesn't seem like a regular fault so its off to the repair shop under warranty (up to a week wait around here).
So can't help that much iDijkman ... I suppose get it fixed while you still have some warranty.

Toshiba A505 Loud cd/dvd player loud noise!!!

I bought a A505-S6005 about 3 months ago. Everything works great but just yesterday i put a dvd in the drive and it started making a loud sound. It vibrates real bad and the fan makes a loud noise too. It finally stop making noise then as soon as it would read it again the noise would come back. It does that with every cd or dvd. The laptop came with a One year warranty but i lost the paper and the receipt. I still have the box and stuff. I was wondering if i could still return it ? Thanx

I would not rule out the possibility of it being defective, you really should get that looked at. Unless a Best Buy employee says otherwise, I think if you purchased your laptop directly from Best Buy, I think they can send out your Toshiba Laptop on your behalf to the manufacturer for warranty repair.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Cd/dvd drive making noise

Hi all!
I just got a brand new 20-inch Alu iMac with Leopard installed last month as an early Christmas present, my very first mac and love it. I have a couple of questions I thought I'd throw it to you experts out there.
Firstly, the cd/dvd drive is making a whirring noise, to me it sounded like a plane taking off, whenever I put in a disc. I have tried a preinstalled cd that came with my mac. I have read on the forum that some cd/dvd make noise. Should I be worried about this before my warranty expires?
Secondly, I am not sure if it is related. I tried to burn my playlist on iTunes to CD. It took multiple discs as I have a long playlist. After the first disc, I put in the next blank one. But the issue is after I finished burning the playlist and putting the cd in to test, the first cd has no info on it but the rest of the cds are okay. I have burned cds from iTunes on my old pc before and did not have any problems. Are both of these issues related? Do I need to take the mac into an Apple store and get it checked out?
Thanks in advance for any help

Hi Bbolin! Thanks for your response and suggestion to go to iTunes forum. I did have a look over there and there is a thread going on on this. Apparently there is a bug in the os. So, as soon as I get some more cds I will try burning at a lower speed. Thanks again for your help. Have a great 2008.

DVD drive making noises

Hi,
Every once in a while, I heard the DVD drive make the noise that you get when you are inserting or ejecting a dvd. There is nothing in there. I just inserted one and ejected it with no problem. It seems to work fine, but I am getting those noises every once in a while. My iMac has the latest updates as the Update Manager says I am up to date.
What could this be?
Thank you,
Gloria

It sounds as if there's a mechanical failure with your SuperDrive. Since you're still under warranty, I would take the machine into an Apple Store or an AASP and have them diagnose and fix the problem.
Good luck,
Clinton

Can't install CS3 Upgrade on NEW iMac 24". An Imac DVD drive issue?

My CS3 Design Premium Upgrade CD fails to install Photoshop on my BRAND NEW iMac yet it is able to install everything else on the CS3 disc. I just bought this iMac yesterday and CS2/CS3 Upgrade are the FIRST things I installed (besides updates) when I turned it on. I'm still using 10.4.10.
I searched through the Adobe forums and the internet as to how others with the same issue have dealt with the problem, but it seems the most common reason is that people had installed Photoshop CS3 beta previously as well as older Flash/Acrobat plug-ins conflicting with the installation process. Further, these causes seem to be effecting Windows users.
So a few hours ago I tried to COPY the upgrade CD contents to my hard disk, I get the message:
"The Finder cannot complete the operation because some data in 'AdobePhotoshop 10en_US.dmg' could not be read or written. (Error code -36)."
This procedure of copying to the disk (and the resulting error message) is SPECIFICALLY addressed in the Adobe support pages TechNotes:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401429&sliceId=2
The page says that it may be a drive issue that is causing the problem. Of the 7 possible solutions given on the page, I've narrowed it down to only 1 option left (but I can't try it since I don't have another Mac!):
"*Solution 4*: Copy the software to the hard drive of a different computer.
*If the software copies successfully, the model of DVD drive on your original computer might not be able to read the DVD. Contact the DVD drive or computer manufacturer for any updates that might be available.*"
But what's funny (or annoying rather) is, I had a 20" Alum 2.4 iMac earlier this year (returned because of screen problem), and the CS3 upgrade installed without any problems on it!..??? And according to the iMac specs, the 20" and 24" models both have the same DVD drive make right?
Any ideas??? Are there other 24" iMac users who are experiencing similar problems? If not, then I guess I may have to return yet another iMac...which I'm reluctant to do since this screen is PERFECT! I'm scared to get another iMac with the dreaded screen gradient issue.

I just solved the problem.
I tried copying the DVD files to the hard disk about 7-8 more times. The last try SUCCESSFULLY copied to the disk and I was able to install Photoshop CS3.
Yay.

Dvd drive making noises and spitting out dvd

I don't know what's going on but whenever I put in a dvd the dvd drive makes a lot of noise which doesn't sound good, and sometimes it spits out the dvd or shuts the dvd program down and then my computer freezes on a black screen and i have to shut down my computer by turning it off. =(
This computer is about 8 months old and I don't think there should be any issues from my end. I have never dropped it or spilled anything on it. I unfortunatley never bought teh apple care....i know dumb! but nonetheless it's not bought. Does anyone know how or what i can do to resolve this issue besides not playing a dvd? Thanks any advice helps!

It sounds as if there's a mechanical failure with your SuperDrive. Since you're still under warranty, I would take the machine into an Apple Store or an AASP and have them diagnose and fix the problem.
Good luck,
Clinton

IMac DVD drive issues (May 2011 Thunderbolt models)?

I'm going nuts. I picked this machine back up three hours ago from the Apple Store, where they replaced my Optiarc DVD drive on my 27" iMac with a new one (and also the cable).
I'm having the same danged problem. So either there's a rash of bad Optiarc drives out there, or the Apple Store didn't do crap.
Without going into all of the headaches, these are the disk CRC-32's from the "iMac Mac OS X Install DVD" that came with the machine:
On this machine:             $193BD913
On the "good" machine: $85FBE37B
Image made on good:     $85FBE37B (i.e., I made a read-only disk image on the "good" machine of this disk)
Image made on this:       "unable to verify" (twice)
Can somerun please run a CRC32 checksum for me on their May 2011 Thunderbolt iMac DVD and confirm the correct checksum?
I've tried similar DVD's with similar results.
I'm confident I don't have a software conflict, because that's just illogical, and also this machine won't install from the DVD onto a fresh drive (in fact I had to make a USB key on the "good" machine to get this machine to work).
Finally, is there a software method of determining the serial number of the Optiarc drive? System Profiler doesn't show it, and I want to make danged sure that they replace it next time.
Thanks!

No one can run a checksum for me in Disk Utility? Please?

Imac dvd drive won't accept disks

My iMac's dvd drive won't let me insert any disks. It feels like there's something blocking the way in. The eject button on my keyboard doesn't seem to be working either – usually the dvd drive makes an 'ejecting sound' when the button is pushed, even when there's no disk. I've also tried some disk ejecting tricks found in this community. The dvd drive seems to be responding to nothing...

Try this:
Repairing the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
No guarantee this will work but it's a start.

Changing iMac DVD drive's 'Region'

Hi peeps!
I live in the UK, and I've had this iMac G4 for about 3 years now. It's running OSX 10.4.6.
When I try to play a normal 'Region 2' DVD, DVD Player throws up the lovely old "you need to change your drive's region setting" dialogue box. Which is fine - the drive should be Region 2 anyway, so I'd be more than happy to change it back from Region 1. The message says I have FOUR changes left. I click "Change" or whatever it is...
... And the iMac throws up 'Error 70001' (can't change the region). Errrr... WHY!? I have 4 changes left. ARGH!!
So, now I'm stuck with a region 1 DVD drive, which I can't change for some unknown reason, in a Region 2 country. Great. I've been told to try VLC or MacTheRipper, but it's hardly ideal.
Are there any solutions to my problem? How can I change my drive's region setting? I'll try anything.
Many thanks in advance.
MMZ
iMacs, G4s, iBooks, iPods... the lot! :P Mac OS X (10.4.7)

Short of taking it in to Apple and making sure the region coding is reset to the limited number of changes you get out of the factory, or finding a non-supported firmware update that makes it region-code insensitive, no. Doing the latter may though not be legally sound, as region-coding is part of the DRM encoding all DVDs have. In the future only play DVDs from your local region. If you need a different region because you move around a lot, find out what is the most legally viable way to handle that situation.

DVD drive makes noise whenever my macbook is moved???

6 months without any problem then suddendly any time I move my MB there is a noise (like an eject noise) comming from my dvd drive. I don't have any CD or DVD in the drive.
Any idea? Is my dvd drive going bad?
Thanks

Are you sure it isn't the hard drive's sudden motion detector temporarily parking the HD heads?

IMac DVD Drive--Loud Noises

Similar Messages

Maybe you are looking for